V4-3 RAMSET | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Ramset™ New Zealand Sales, Orders and Enquiries Tel: 0800 RAMSET (726738) Email: info@ramsetreid.co.nz Web: www.ramset.co.nz CableMaster™ Consumables ClipElec™ 4 4 4 4 4 4 DataLec™ Clip 4 4 4 4 4 4 4 CTClip™ 4 4 4 4 4 4 Threaded Rod Hanger 4 4 4 4 Direct Alignment Half Saddle 4 4 4 Strap & Plate Mounting Washer Catenary Wire Bracket 4 4 Application Type
4 Recommended
Strap, Plates & Fixtures Light Duty Cable Tray Flexible/Plastic Pipe Catenary Wire Electrical Conduit Cable Fixing Small Diameter Rigid Pipes Metal Pipes Metal/Nylon Straps Fire & Service Cabling AU ONLY CableMaster™ 800 Plus CableMaster™ C-Plus® Consumable Selection Guide PulsaLift™ 800 Plus Pole System to suit CableMaster™ C-Plus® & CableMaster™ 800 Plus CB1376 -2023 Important Disclaimer: Any engineering information or advice (“Information”) provided by Ramset™ in this document is issued in accordance with a prescribed standard, published performance data or design software. It is the responsibility of the user to obtain its own independent engineering (or other) advice to assess the suitability of the Information for its own requirements. To the extent permitted by law, Ramset ™ will not be liable to the recipient or any third party for any direct or indirect loss or liability arising out of, or in connection with, the Information. Ramset™ Australia Sales, Orders and Enquiries Tel: 1300 780 063 Email: enquiry@ramset.com.au Web: www.ramset.com.au Keep up to date with Ramset ™ on our socials'
PulsaLift™ 800 Plus Pole System Use your CableMaster™ C-Plus® or CableMaster™ 800 Plus with the flexible PulsaLift™ Plus Pole System for complete overhead installation without the need for scissor lift equipment. P ermanent cable suspension to concrete & steel
- P ipe suspension to concrete & steel
- F ire & security cabling
- T emporary cable suspension COMPONENTS DESCRIPTION CRADLECM800PLUS Cradle only V4-3 0.9 metre (3 foot) Pole with Trigger V4-EXT 0.9 metre (3 foot) Extension Pole without Trigger PL800PLUS Complete Kit (Tool not included) CRADLECM800PLUS is compatible with the CM800PLUS and CMCPLUS tool. SAFETY WARNING Never hold onto the triggering section of the pole whilst loading clips or fasteners into the tool. Inadvertent activation can result in severe injury. Only ever fire the tool overhead while using the pole system. INSTALLATION The PulsaLift™ 800 Plus cradle consists of 2 elements: the cup and the retaining bolt (tethered to the cup with a steel cable). 1. P lace the back of the tool (black cap first) into the cup. Make sure that the tool is fully seated. P ress the button of the retaining bolt (to disengage the ball bearings) and push the retaining bolt through the holes in the cage provided over the trigger. Release the retaining bolt button while making sure that the ball bearings have engaged on the other side of the holes. D epending upon the application height, choose whether the extension pole is required or just the triggering pole. CableMaster™ 800 Plus cradle insert Part Number L1 and R1 (pictured in orange). CableMaster™ C-Plus® cradle insert Part Number LHINSERT (pictured in orange). OPERATION 1. L oad the tool (avoid applying pressure to the trigger when doing so). 2. Hold the p ole and tool vertically upwards. 3. P ush the tool against the work surface to close the fastener guide of the tool. 4. Use the tr igger on the pole to apply more pressure to the work surface to fire the tool.