CM6100 ONSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
0.4mm Pitch Daisy Chain CM6100 ©2010 SCILLC. All rights reserved. Publication Order Number: May 2010 Rev. 6 CM6100/D Product Description The 6100 is a 4-bump very low capacitance ESD protection device in 0.4mm CSP form factor. It is fully compliant with IEC 61000-4-2. The CM6100 is RoHS II compliant. Electrical Schematic / Pin Description WHERE X = A = ww01, ww02 J = ww19, ww20 S = ww37, ww38 B = ww03, ww04 K = ww21, ww22 T = ww39, ww40 C = ww05, ww06 L = ww23, ww24 U = ww41, ww42 D = ww06, ww08 M = ww25, ww26 V = ww43, ww44 E = ww08, ww10 N = ww27, ww28 W = ww45, ww46 F = ww11, ww12 O = ww29, ww30 X = ww47, ww48 G = ww13, ww14 P = ww31, ww32 Y = ww49, ww50 H = ww15, ww16 Q = ww33, ww34 Z = ww51, ww52 I = ww17, ww18 R = ww35, ww36
Rev. 6 | Page 2 of 6 | www.onsemi.com Pin Information PIN DESCRIPTIONS PIN DESCRIPTION PIN DESCRIPTION A1 ESD Channel 1 B1 Device Ground A2 ESD Channel 2 B2 Device Ground
Ordering Information
PART NUMBERING INFORMATION Bumps Package Variation Ordering Part Number Part Marking
4 CSP CSP-SAC105 CM6100 P
Note 1: Parts are shipped in Tape & Reel form unless otherwise specified. Electrical Specifications and Conditions PARAMETERS AND OPERATING CONDITIONS PARAMETER RATING UNITS Storage Temperature Range -55 to +150 °C Operating Temperature Range -40 to +85 °C
Rev. 6 | Page 3 of 6 | www.onsemi.com ELECTRICAL OPERATING CHARACTERISTICS (SEE NOTE 1) SYMBOL PARAMETER CONDITIONS MIN TYP MAX UNITS VIN Input Operating Supply Voltage 3.0 5.5 V VB Breakdown Voltage (Positive) I F = 8mA 6 V ILEAK Channel Leakage Current V IN = 3V ±0.1 ±0.30 μA CIN Channel Input Capacitance At 1 MHz, V IN=0V 1.5 pF ΔCIN Channel Input Capacitance Matching At 1 MHz, V IN=0V 0.02 pF VESD ESD Protection Peak Discharge Voltage at any channel input a) Contact discharge per IEC 61000-4-2 standard b) Air discharge per IEC 61000-4-2 standard Notes 2 ±15 kV kV VCL Channel Clamp Voltage Positive Transients Negative Transients IPP = 1A, tP = 8/20μs +9.8 -1.5 V V RDYN Dynamic Resistance Positive Transients Negative Transients I PP = 1A, tP = 8/20μS Any I/O pin to Ground 0.7 0.5 Ω Ω Note 1: All parameters specified at TA = 25°C unless otherwise noted. Note 2: Standard IEC 61000-4-2 with CDischarge = 150pF, RDischarge = 330Ω.
Rev. 6 | Page 4 of 6 | www.onsemi.com Mechanical Specification CSP-4 Mechanical Specifications The CM6100 is supplied in a 4 bump Chip Scale Package (CSP). PACKAGE DIMENSIONS Package Custom CSP Bumps 4 Millimeters Inches Dim Min Nom Max Min Nom Max Controlling dimension: millimeters B A DIMENSIONS IN MILLIMETERS BOTTOM VIEW SIDE VIEW 0.27 DIA. SOLDER BUMPS Package Dimensions for CM6100 Chip Scale Package
Figure 1. Sectional View
Figure 2. Tape and Reel Mechanical Data Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.