CM2836 CHAMP | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 11

Technical content

300mA LOW ESR CMOS LDO WITH ENABLE 2007/06/28 Rev1.1 Champion Microelectronic Corporation Page 1 GENERAL DESCRIPTION

FEATURES

The CM2836/B/C family is a positive voltage linear regulator developed utilizing CMOS technology featured low quiescent current (30µA typ.), low dropout voltage, and high output voltage accuracy, making them ideal for battery applications. EN input connected to CMOS has low bias current. The space-saving SC70 package is attractive for “Pocket” and “Hand Held” applications. These rugged devices have both Thermal Shutdown, and Current limit to prevent device failure under the “Worst” of operating conditions. In application requiring a low noise, regulated supply, place a 1000pF capacitor between Bypass and Ground. The CM2836/B/C is stable with a Low ESR output capacitance of 1.0µF or greater. ‹ Very Low Dropout Voltage ‹ Low Current Consumption: Typ. 30µA, Max. 35µA ‹ More Options Output Voltage ‹ High Accuracy Output Voltage: +/- 2% ‹ Guaranteed 300mA Output ‹ Input Range up to 7.0V ‹ Thermal Shutdown ‹ Current Limiting ‹ Stability with Low ESR Capacitors ‹ Compact Package: SOT-23 / SOT-89 / SC70 ‹ Factory Pre-set Output Voltages ‹ Low Temperature Coefficient

APPLICATIONS

‹ Battery-powered devices ‹ Personal communication devices ‹ Home electric/electronic appliances ‹ PC peripherals TYPICAL APPLICATIONS

300mA LOW ESR CMOS LDO WITH ENABLE 2007/06/28 Rev1.1 Champion Microelectronic Corporation Page 2 PIN CONFIGURATION SOT-23-3 Top View 2836 2836B Pin 1 GND VIN Pin 2 VOUT VOUT Pin 3 VIN GND SOT-23-5 Top View SC70-5 Top View SOT-89 Top View BLOCK DIAGRAM O v e rc u rre n t S h u td o w n T h e rm a l S h u td o w n R 1 R 2 IN O U T G N D Vref = 1.176V A M P B Y P E N 1 u A 2836 Pin 1 VIN Pin 2 GND Pin 3 EN Pin 4 BYP Pin 5 VOUT 2836 Pin 1 GND Pin 2 VIN Pin 3 VOUT CM2836 2836B 2836C Pin 1 VIN NC NC Pin 2 GND GND VIN Pin 3 EN NC NC Pin 4 BYP VIN GND Pin 5 VOUT VOUT VOUT

300mA LOW ESR CMOS LDO WITH ENABLE 2007/06/28 Rev1.1 Champion Microelectronic Corporation Page 3

ORDERING INFORMATION

Example: Part Number Output Voltage Temperature Range Package CM2836/B/CGSIM23 3.3V -40℃ ~ +85℃ SOT-23 CM2836/B/CGSIM25 3.3V -40℃ ~ +85℃ SOT-23-5 CM2836/B/CGSIM89 3.3V -40℃ ~ +85℃ SOT-89 CM2836/B/CGSIM75 3.3V -40℃ ~ +85℃ SC70-5 Note: For other pre-set output voltage requirements, please contact Champion Sales office. Please refer to page 10 ABSOLUTE MAXIMUM RATINGS OPERATING RATINGS Output Voltage ………………….…… GND-0.3V to VIN+0.3V THERMAL INFORMATION Parameter Package Maximum Unit Thermal Resistance (Θjc) SOT-23 SOT-23-5 160 ℃/W Thermal Resistance (Θjc) SOT-89 100 ℃/W Thermal Resistance (Θjc) SC70-5 250 ℃/W SOT-23 SOT-23-5 250 mW SOT-89 400 mW Internal Power Dissipation (PD) (ΔT = 100℃) SC70-5 200 mW Maximum Junction Temperature 150 Maximum Lead Temperature (10 Sec) 300 Caution: Stress above the listed absolute rating may cause permanent damage to the device.

300mA LOW ESR CMOS LDO WITH ENABLE 2007/06/28 Rev1.1 Champion Microelectronic Corporation Page 4

ELECTRICAL CHARACTERISTICS

TA = +25℃; unless otherwise noted CM2836/B/C Parameter Symbol Test Conditions Min. Typ. Max. Unit Input Voltage VIN Note 1 V Output Voltage Accuracy VOUT IO = 1mA to 300mA 1.2V<VO(NOM)≤2.0V 1300 2.0V<VO(NOM)≤2.5V 400 Dropout Voltage VDROPOUT IO = 300mA, VOUT=VO(NOM)-2%, 2.5V<VO(NOM) 300 mV Output Current IO VOUT > 1.2V 300 mA Current Limit ILIM VOUT > 1.2V 300 450 mA Short Circuit Current ISC Vo<0.8V 300 500 mA Quiescent Current IQ IO = 0mA μA Ground Pin Current IGND IO = 1mA to 300mA μA Line Regulation REGLINE IOUT=5mA, VIN=VOUT+1 to VOUT+2 -0.1 0.02 0.1 Load Regulation REGLOAD IO=1mA to 300mA 0.2 Over Temperature Shutdown OTS 150 Over Temperature Hysteresis OTH VOUT Temperature Coefficient TC ppm/℃ Power Supply Rejection (Sot23-3/Sot-89) PSRR IO = 100mA CO=2.2µF ceramic f=1kHz f=10kHz f=100kHz dB f=1kHz f=10kHz Power Supply Rejection (Sot23-5/SC70-5) PSRR IO = 100mA CO=2.2µF ceramic CBYP=0.01µF f=100kHz dB CO=2.2µF Output Voltage Noise (Sot23-3/Sot-89) eN f=10Hz to 100kHz IO = 10mA, CBYP=0µF CO=100µF μVrms CO=2.2µF Output Voltage Noise (Sot23-5/SC70-5) eN f=10Hz to 100kHz IO = 10mA, CBYP=0.01µF CO=100µF μVrms Shutdown Supply Current ISD VIN=5.0V, VOUT=0V, VEN < VEL 0.2 2.0 μA IEH VEN=VIN, VIN=2.6V to 7V 0.1 μA EN Input Bias Current IEL VEN=0, VIN=2.6V to 7V 0.2 2.0 μA VEH VIN=2.6V to 7V VIN V EN Input Threshold VEL VIN=2.6V to 7V 0.4 V Note 1. VIN(MIN) = VOUT + VDROPOUT Note 2. The input voltage should be better applied before a current source load is applied to avoid start up problem.

300mA LOW ESR CMOS LDO WITH ENABLE 2007/06/28 Rev1.1 Champion Microelectronic Corporation Page 5 DETAILED DESCRIPTION The CM2836/B/C family of CMOS regulators contains a PMOS pass transistor, voltage reference, error amplifier, over-current protection, output short protection, and thermal shutdown. The P-channel pass transistor receives data from the error amplifier, over-current protection, output short protection, and thermal protection circuits. During normal operation, the error amplifier compares the output voltage to a precision reference. Over-current and Thermal shutdown circuits become active when the junction temperature exceeds 150℃, or the current exceeds 300mA. During thermal shutdown, the output voltage remains low. Normal operation is restored when the junction temperature drops below 120℃. The CM2836/B/C switches from voltage mode to current mode when the load exceeds the rated output current. This prevents over-stress. ENABLE The Enable pin normally floats high. When actively, pulled low, the PMOS pass transistor shut off, and all internal circuits are powered down. In this state, the quiescent current is less than 2µA. This pin behaves much like an electronic switch. EXTERNAL CAPACITOR The CM2836/B/C is stable with a Low ESR output capacitor to ground of 1.0µF or greater. It can keep stable even with higher ESR capacitors. A second capacitor is recommended between the input and ground to stabilize VIN. The input capacitor should be larger than 1µF to have a beneficial effect. All capacitors should be placed in close proximity to the pins. A “quiet” ground termination is desirable.

300mA LOW ESR CMOS LDO WITH ENABLE 2007/06/28 Rev1.1 Champion Microelectronic Corporation Page 6 TYPICAL CHARACTERISTICS

300mA LOW ESR CMOS LDO WITH ENABLE 2007/06/28 Rev1.1 Champion Microelectronic Corporation Page 7

300mA LOW ESR CMOS LDO WITH ENABLE 2007/06/28 Rev1.1 Champion Microelectronic Corporation Page 8 PACKAGE DIMENSION SOT-23 (M23) L D E A b c θ e D E e b A b c Base Metal With Plating Section B-B See Section B-B L θ SOT-23-5 (M25) L D E A b c θ e D E e b A b c Base Metal With Plating Section B-B See Section B-B L θ

300mA LOW ESR CMOS LDO WITH ENABLE 2007/06/28 Rev1.1 Champion Microelectronic Corporation Page 9 SOT-89 (M89) e H E A b L C D D e E L H b b C φ1.0 A SC70-5

300mA LOW ESR CMOS LDO WITH ENABLE 2007/06/28 Rev1.1 Champion Microelectronic Corporation Page 10 NUMBERING SCHEME note1: CM2836/B/C: 300mA CMOS LDO with enable X : Suffix for voltage output (note 3) Y : Suffix for Temperature Range (note 4) Z : Suffix for Package Type (note 5) note2: CM2836/B/C: 300mA CMOS LDO with enable G : Suffix for Pb Free Product X : Suffix for voltage output (note 3) Y : Suffix for Temperature Range (note 4) Z : Suffix for Package Type (note 5) note 3: see CMOS LDO Voltage Suffix Table CMOS LDO Voltage Suffix Table Output Voltage Suffix Output Voltage Suffix 1.2V AC 2.5V K 1.5V A 2.6V L 1.7V C 2.7V M 1.8V D 2.8V N 2.0V F 3.0V P 2.1V G 3.1V Q 2.2V H 3.3V S 2.3V I 3.6V V note 4: Y= I : -40℃~+85℃ (only I grade support for all CMOS LDOs) note 5: Z is single alphabet with or without digits M25 : SOT-23-5 (TR only) M23 : SOT-23 (TR only) M89 : SOT-89 (TR only) SC70-5 (TR only)

300mA LOW ESR CMOS LDO WITH ENABLE 2007/06/28 Rev1.1 Champion Microelectronic Corporation Page 11 IMPORTANT NOTICE Champion Microelectronic Corporation (CMC) reserves the right to make changes to its products or to discontinue any integrated circuit product or service without notice, and advises its customers to obtain the latest version of relevant information to verify, before placing orders, that the information being relied on is current. A few applications using integrated circuit products may involve potential risks of death, personal injury, or severe property or environmental damage. CMC integrated circuit products are not designed, intended, authorized, or warranted to be suitable for use in life-support applications, devices or systems or other critical applications. Use of CMC products in such applications is understood to be fully at the risk of the customer. In order to minimize risks associated with the customer’s applications, the customer should provide adequate design and operating safeguards. HsinChu Headquarter Sales & Marketing 5F, No. 11, Park Avenue II, Science-Based Industrial Park, HsinChu City, Taiwan 7F-6, No.32, Sec. 1, Chenggong Rd., Nangang District, Taipei City 115, Taiwan TEL : +886-3-567 9979 TEL : +886-2-2788 0558 FAX: +886-3-567 9909 FAX: +886-2-2788 2985