CLY2_15 TRIQUINT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

Features

  • For frequencies up to 3 GHz
  • Wide operating voltage range: 2 to 6 V
  • POUT 23.5 dBm typical at VD=3V, f=1.8GHz
  • High efficiency: better than 55 %
  • Nfmin 0.79 dB typical at 900 MHz
  • Low Cost

Applications

  • Power Amplifiers for WLAN transceivers
  • Driver Amplifiers for WLAN or mobile phone basestations
  • Low Noise Amplifier for basestations and antenna amplifiers Package Outline, MW6 Pin Configuration: 1 & 6: Gate 2 & 5: Source 3 & 4: Drain

For additional information and latest specifications, see our website: www.triquint.com 3 Revision C, December 14, 2005 Maximum Ratings Parameter Symbol Values Unit Drain-source voltage VDS 9 V Drain-gate voltage V DG 12 V Gate-source voltage V GS -6 V Drain current I D 600 mA Channel temperature T Ch 150 °C Storage temperature T stg -55...+150 °C Total power dissipation (Ts < 50 °C) 1) P tot 900 mW Thermal Resistance Channel-soldering point 1) R thChS ≤110 K/W 1)Ts: Temperature at soldering point

Electrical Characteristics

(TA = 25°C , unless otherwise specified) Parameter Symbol min typ max Unit Drain-source saturation current VDS = 3 V VGS = 0 V IDSS 300 450 650 mA Drain-source pinch-off current VDS = 3 V VGS = -3.8 V ID - 5 50 µA Gate pinch-off current VDS = 3 V VGS = -3.8 V IG - 5 20 µA Pinch-off Voltage VDS= 3 V ID=50µA Small Signal Gain*) VDS = 5 V ID = 180 mA f = 1.8 GHz Pin = -5 dBm G - 15.5 - dB Small Signal Gain*) VDS = 3 V ID = 180 mA f = 1.8 GHz Pin = -5 dBm G - 14.5 - dB Output Power VDS = 3 V ID = 180 mA f = 1.8 GHz Pin = 10 dBm Po 22.5 23.5 - dBm

For additional information and latest specifications, see our website: www.triquint.com 4 Revision C, December 14, 2005 Electrical Characteristics (cont) 1dB-Compression Point VDS = 3 V ID = 180 mA f = 1.8 GHz P1dB - 23.5 - dBm 1dB-Compression Point VDS = 5 V ID = 180 mA f = 1.8GHz P1dB - 27.0 - dBm Power Added Efficiency VDS = 3 V ID = 180 mA f = 1.8 GHz Pin = 10 dBm PAE - 55 - % Noise figure VDS = 3 V ID = 180 mA f = 1.8GHz NF 1.48 dB *) Matching conditions for maximum small signal gain (not identical with power matching conditions!) **) Power matching conditions: f=1.8GHz: Source Match: Γms: MAG = 0.74, ANG 132°; Load Match: Γml: ;MAG 0.61, ANG -153°

For additional information and latest specifications, see our website: www.triquint.com 5 Revision C, December 14, 2005 Electrical Characteristics (cont) Output characteristics Compression Power vs. Drain-Source Voltage f = 1.8GHz; IDS = 0.5 Idss P1dB [dBm] 0123456 [V] Drain-Source Voltage ηD [%] 0.00 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.50 01234567 Drain-Source Voltage [V] Draincurrent [A] VG=0 V VG=-0,5V VG=-1,0V VG=-1,5V VG=-2V VG=-2,5V Ptot DC

For additional information and latest specifications, see our website: www.triquint.com 6 Revision C, December 14, 2005 Electrical Characteristics (cont) Typical Common Source S-Parameters and noise data V DS = 3 V I D = 180 mA Z o = 50 Ω f F min Γopt Rn rn GHz dB MAG ANG Ω − Additional S-Parameter and noise data available on data disc!

For additional information and latest specifications, see our website: www.triquint.com 7 Revision C, December 14, 2005 Electrical Characteristics (cont) Total Power Dissipation Ptot = f(Ts) 0.2 0.4 0.6 0.8 1.0 [W] 0 50 100 150 Ts C O Permissible Pulse Load Ptotmax/PtotDC = f(tp)

For additional information and latest specifications, see our website: www.triquint.com 8 Revision C, December 14, 2005 Package Dimensions Dim. min. nom. max. Gradient Remark A 1.1 A1 0.1 A2 1.0 b 0.3 b1 0.6 c 0.08 0.15 D 2.8 3.0 E 1.2 1.4 |e| 0.95 |e1| 1.9 HE 2.6 LE 0.6 a max 10° 1 q 2°...30°

Package Orientation on Reel

Ordering Information

Type Marking Pin Configuration . 1 2 3 4 5 6 Package 1) CLY 2 CY2 G S D D S G MW 6 Additional Information This part is compliant with RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and Electronic Equipment). The part is rated Moisture Sensitivity Level 1 at 260°C per JEDEC standard IPC/JEDEC J-STD-020. ESD: Electrostatic discharge sensitive device. Observe handling Precautions. For latest specifications, additional product information, worldwide sales and distribution locations, and information about TriQuint: Web: www.triquint.com Tel: (503) 615-9000 Email: info_wireless@tqs.com Fax: (503) 615-8902 For technical questions and additional information on specific applications: Email: info_wireless@tqs.com The information provided herein is believed to be reliable; TriQuint assumes no liability for inaccuracies or omissions. TriQuint assumes no responsibility for the use of this information, and all such information shall be entirely at the user's own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. TriQuint does not authorize or warrant any TriQuint product for use in life-support devices and/or systems. Copyright © 2005 TriQuint Semiconductor, Inc. All rights reserved.