CLSA0402 RIEDON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Riedon Inc. 300 Cypress Avenue Alhambra CA 91801 (626) 284-9901 (626) 284-1704 www.riedon.com Page 11 Power Derating Curve 100 0 20 40 60 70 80 100 120 140 155 Ambient Temperature (°C) Power (%) Type CLSA0402 CLSA0603 CLSA0805 CLSA1206 CLSA2010 CLSA2512 “High” Resistance Range (W) 0.05 to 1.0 Temperature Coefficient (depending on ohmic value) ±200 to ±400 ppm ±200 to ±600 ppm ±100 ppm upon request “High” Temperature Coefficient (depending on ohmic value) ±200 to ±400 ppm ±200 to ±300 ppm Tolerances 1% / 2% / 5% Operating Temperature range -55 to +155°C Dimensions (LxW) mm [inches] 1.00 x 0.50 [0.04 x 0.02] 1.60 x 0.80 [0.06 x 0.03] 2.00 x 1.25 [0.08 x 0.05] 3.10 x 1.55 [0.12 x 0.06] 5.00 x 2.50 [0.20 x 0.10] 6.30 x 3.10 [0.25 x 0.12] Packaging (pcs) Tape and Reel 10,000 5,000 4,000 CLSA Series

  • AEC-Q200 Compliant
  • Resistances from 0.01 to 1Ohms
  • Power Rating to 2 Watt
  • Resistance Tolerances to ± 1%
  • TCR’s to ±100 ppm/°C
  • Alumina Substrate for High Power Dissipation
  • Sizes: 0402 / 0603 / 0805 / 1206 / 2010 / 2512 SPECIFICATIONS Current Sensing Chip Resistor

Ordering Information

Part Description: Part Type - Resistance - Tolerance - TCR - Packaging - High/Standard Rating Example: CLSA 2512 0.500Ohms 1% 100ppm HP (Note: If no TCR is specified the highest value will be supplied. Standard Rating will be given if not specified)

Riedon Inc. 300 Cypress Avenue Alhambra CA 91801 (626) 284-9901 (626) 284-1704 www.riedon.com Page 12 CLSA Series Current Sensing Chip Resistor Test Requirement Test Method Temperature Coefficient of Resistance As Spec. -55°C to 125°C, 25°C reference temperature Short Time Overload ±0.5%+0.05Ω RCWV*2.5 or Max. overload voltage for 5 seconds Insulation Resistance >10G Max. overload voltage for 1 minute Load Life ±1.0%+0.05Ω 70±2°C, Max. working voltage for 1000 hrs with 1.5 hrs “ON” and 0.5 hrs “OFF” Biased Humidity ±1.0%+0.05Ω 1000hrs 85°C/85% RH 10% of operating power High Temperature Exposure ±0.5%+0.05Ω at +155°C for 1000 hrs Bending Strength As Spec. Bending once for 5 seconds with 3mm Thermal Shock ±0.5%+0.05Ω -55°C/+155°C. 300 cycles with maximum trans- fer time of 20 seconds. Dwell time 15 minutes air to air Solderability 95% min. coverage 245±5°C for 3 seconds Resistance to Soldering Heat ±0.5%+0.05Ω 260±5°C for 10 seconds Voltage Proof No breakdown or flashover 1.42 times RCWV (RMS) for 1 minute Leaching Individual leaching area <5% Total leaching area <10% 260±5°C for 30 seconds Temperature Cycling ±0.5%+0.05Ω -55°C to +125°C, 1000 cycles Moisture Resistance ±1.0%+0.05Ω 24hrs/cycle Mechanical Shock ±0.25%+0.05Ω Wave form: Tolerance for half sine pulse Peak value of 100g’s. Normal Duration (D) is 6 Vibration ±0.5%+0.05Ω 5 g’s for 20 min., 12 cycles each of 3 orienta- tions, 10-2000 H ESD ±1.0%+0.05Ω Human body, 2KV Flame Retardance No Flame Present Temperature sensing at 500°C, voltage power subjected to 32VDC current clamped up to 500ADC and decreased in 1.0VDC/hour Resistance to Solvents Marking Unsmeared Add Aqueous wash chemical - OKEM Clean or equivalent. Do not use banned solvents. Terminal strength Not broken Force of 1.8kg for 60 second Environmental Characteristics