CLN6A

CLN6A MARKTECH | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 12

Technical content

Subject to change without notice. www.cree.com/ledlamps Data Sheet: CLD-CT979.003 Cree® CLN6A-WKW/MKW Data Sheet The CLN6A LED delivers superior value with common voltage, current, size and optical properties. The Cree CLN6A is available in both cool and warm white to address a variety of lighting applications, including linear, portable, landscape and entertainment.

FEATURES

• Size (mm): 5.0 x 5.0 x 1.3
• Cool White (CLN6A-WKW): » CCT: 4600 K - 15000 K, typical 5500 K » CRI: 72 » Luminous Flux: 60.5 - 101.8
• Warm White (CLN6A-MKW) » CCT: 2500 K - 4600 K, typical 3200 K » CRI: 80 » Luminous Flux: 51.0 - 101.8
• Max. Current: 350 mA
• Viewing Angle: 115°
• RoHS-Compliant

APPLICATIONS

• Linear Lighting
• Channel Letter
• Portable Lighting
• Architectural & Landscaping Lighting
• Entertainment Lighting

2 CLD-CT979.003 Cree, Inc.

4600 Silicon Drive

Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Absolute Maximum Ratings (TA = 25°C) Items Symbol Absolute Maximum Rating Unit Cool/Warm Forward Current IF 350 mA Peak Forward Current Note 1 IFP 600 mA Reverse Voltage VR 5 V Power Dissipation PD 1200 mW Operation Temperature Topr -40 ~ +90 °C Storage Temperature Tstg -40 ~ +100 °C Junction Temperature TJ 125 °C Note: 1. Pulse width ≤10 msec, duty cycle ≤10%. Typical Electrical & Optical Characteristics (TA = 25°C) Characteristics Color Symbol Condition Unit Minimum Typical Maximum Forward Voltage Cool/Warm VF IF = 300 mA V 3.8 4.4 Reverse Current Cool/Warm IR VR = 5 V μA 100 Luminous Flux Cool ΦV IF = 300 mA lm 60.5 80 Warm ΦV IF = 300 mA lm 51.0 65 Chromaticity Coordinates Cool x IF = 300 mA 0.3325 y IF = 300 mA 0.3411 Warm x IF = 300 mA 0.4234 y IF = 300 mA 0.3990 Thermal Resistance, junction to solder point Note 1 Cool/Warm RTHJS IF = 300 mA °C/W 15 Viewing Angle (FWHM) Cool/Warm 2θ½ IF = 300 mA deg 115 Note: 1. Rth test condition: mounted on MCPCB (pad size ≥40 mm2).

3 CLD-CT979.003 Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Cool White Bin Code Min.(lm) Max.(lm) J0 60.5 72.0 K0 72.0 85.6 L0 85.6 101.8 VF Bin Limit (IF = 300 mA) Cool White Bin Code Min.(V) Max.(V) 44 2.8 3.2 45 3.2 3.6 46 3.6 4.0 47 4.0 4.4 Warm White Bin Code Min.(lm) Max.(lm) H0 51.0 60.5 J0 60.5 72.0 K0 72.0 85.6 L0 85.6 101.8 Flux Bin Limit (IF = 300 mA) Tolerance of measurement of luminous flux is ±10%. Warm White Bin Code Min.(V) Max.(V) 44 2.8 3.2 45 3.2 3.6 46 3.6 4.0 47 4.0 4.4 Color Bin Limit (IF = 300 mA) Bin Code Sub- bin x y Wa 0.2545 0.2480 0.2633 0.2410 0.2545 0.2245 0.2450 0.2290 Wb 0.2633 0.2410 0.2720 0.2340 0.2640 0.2200 0.2545 0.2245 Wc 0.2545 0.2480 0.2640 0.2670 0.2720 0.2575 0.2633 0.2410 Wd 0.2633 0.2410 0.2720 0.2575 0.2800 0.2480 0.2720 0.2340 Bin Code Sub- bin x y We 0.2640 0.2670 0.2735 0.2860 0.2808 0.2740 0.2720 0.2575 Wf 0.2720 0.2575 0.2808 0.2740 0.2880 0.2620 0.2800 0.2480 Wg 0.2735 0.2860 0.2830 0.3050 0.2895 0.2905 0.2808 0.2740 Wh 0.2808 0.2740 0.2895 0.2905 0.2960 0.2760 0.2880 0.2620 Bin Code Sub- bin x y Wj 0.2830 0.3050 0.2950 0.3210 0.2998 0.3028 0.2895 0.2905 Wk 0.2895 0.2905 0.2998 0.3028 0.3045 0.2865 0.2960 0.2760 Wm 0.2950 0.3210 0.3070 0.3370 0.3100 0.3150 0.2998 0.3028 Wn 0.2998 0.3028 0.3100 0.3150 0.3130 0.2970 0.3045 0.2865 Cool White Tolerance of measurement of VF is ±0.05 V.

4 CLD-CT979.003 Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Tolerance of measurement of the color coordinates is ±0.01. Color Bin Limit (IF = 300 mA) Bin Code Sub- bin x y Wt 0.3300 0.3600 0.3455 0.3725 0.3443 0.3535 0.3300 0.3390 Wu 0.3300 0.3390 0.3443 0.3535 0.3430 0.3345 0.3300 0.3180 Wv 0.3455 0.3725 0.3610 0.3850 0.3585 0.3680 0.3443 0.3535 Ww 0.3443 0.3535 0.3585 0.3680 0.3560 0.3510 0.3430 0.3345 Cool White Warm White Bin Code Sub- bin x y Ma 0.3610 0.3900 0.3576 0.3651 0.3751 0.3783 0.3820 0.4075 Mb 0.3576 0.3651 0.3541 0.3401 0.3682 0.3491 0.3749 0.3781 Mc 0.3820 0.4075 0.3751 0.3783 0.3926 0.3915 0.4030 0.4250 Md 0.3751 0.3783 0.3682 0.3491 0.3822 0.3580 0.3926 0.3915 Bin Code Sub- bin x y Me 0.4030 0.4250 0.3926 0.3915 0.4118 0.4021 0.4260 0.4390 Mf 0.3926 0.3915 0.3822 0.3580 0.3976 0.3653 0.4118 0.4021 Mg 0.4260 0.4390 0.4118 0.4021 0.4310 0.4128 0.4490 0.4530 Mh 0.4118 0.4021 0.3976 0.3653 0.4129 0.3725 0.4310 0.4128 Bin Code Sub- bin x y Mj 0.4490 0.4530 0.4310 0.4128 0.4572 0.4203 0.4785 0.4625 Mk 0.4310 0.4128 0.4129 0.3726 0.4359 0.3782 0.4572 0.4203 Mm 0.4785 0.4625 0.4572 0.4203 0.4834 0.4279 0.5080 0.4720 Mn 0.4572 0.4203 0.4359 0.3782 0.4588 0.3838 0.4834 0.4279 Tolerance of measurement of the color coordinates is ±0.01. Bin Code Sub- bin x y Wp 0.3070 0.3370 0.3185 0.3485 0.3200 0.3270 0.3100 0.3150 Wq 0.3100 0.3150 0.3200 0.3270 0.3215 0.3075 0.3130 0.2970 Wr 0.3185 0.3485 0.3300 0.3600 0.3300 0.3390 0.3200 0.3270 Ws 0.3200 0.3270 0.3300 0.3390 0.3300 0.3180 0.3215 0.3075

5 CLD-CT979.003 Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. CIE Chromaticity Diagram W4 Ww Wv Wu Wt Ma Mb Md Mc 0.2300 0.2300 We Wf Wg Wh Wj Wk Wm Wn Wp Wq Ws Wr Me Mf Mh Mg Mj Mk Mn Mm 0.2900 0.3500 0.4100 x 0.4700 0.5300 0.2900 0.3500 y 0.4100 0.4700 0.5300 10000K 9000K 8000K 7000K 6000K 5000K 3500K 3000K 2700K 2500K 4000K 0.1700 0.1700 Wc Wd Wa Wb

6 CLD-CT979.003 Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Order Code Table* Color Kit Number Viewing Angle Luminous Flux (lm) Color Bin Code Min. Max. Cool White CLN6A-WKW-CJ0L0153 115 60.5 101.8 W1,W2,W3,W4,W5 Cool White CLN6A-WKW-CJ0L0343 115 60.5 101.8 W3,W4 Cool White CLN6A-WKW-CJ0L0453 115 60.5 101.8 W4,W5 Cool White CLN6A-WKW-CK0L0343 115 72.0 101.8 W3,W4 Cool White CLN6A-WKW-CK0L0453 115 72.0 101.8 W4,W5 Color Kit Number Viewing Angle Luminous Flux (lm) Color Bin Code Min. Max. Warm White CLN6A-MKW-CH0K0133 115 51.0 85.6 M1,M2,M3 Warm White CLN6A-MKW-CH0K0233 115 51.0 85.6 M2,M3 Warm White CLN6A-MKW-CH0K0513 115 51.0 85.6 W5,M1 Warm White CLN6A-MKW-CJ0K0233 115 60.5 85.6 M2,M3 Warm White CLN6A-MKW-CJ0K0513 115 60.5 85.6 W5,M1 Warm White CLN6A-MKW-CH0L0513 115 51.0 101.8 W5,M1 Warm White CLN6A-MKW-CJ0L0513 115 60.5 101.8 W5,M1 Note:

• The above kit numbers represent the order codes that include multiple flux-bin and color-bin codes. Only one flux- bin code and one color-bin code will be shipped on each reel. Single flux-bin codes and single color-bin code cannotb be ordered.

7 CLD-CT979.003 Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Graphs FIG.4 RELATIVE SPECTRAL POWER DISTRIBUTION FIG.5 MAXIMUM FORWARD DC CURRENT VS AMBIENT TEMPERATURE. DERATING BASED ON Tjmax=125 C IF(mA) 5.0 FIG.1 FORWARD CURRENT VS. FORWARD VOLTAGE. 3.4 0.0 200 400 300 500 4.23.8 4.6 600 If (mA) Vf(V) 3.0 400 FIG.2 RELATIVE LUMINOUS FLUX VS. 0.5 0.0 FORWARD CURRENT 0.0 200100 300 1.0 1.5 2.0 2.5 500 If(mA) 100 FIG.3 RELATIVE LUMINOUS FLUX VS AMBIENT TEMPERATURE DERATING BASED ON Tjmax=125 C 0.0 0 6040 80 1.0 0.5 Ta ( C) 100200 6040 80 Ta ( C)0.0 100 300 200 400 500 FIG.6 FAR FIELD PATTERN -90 -60 -30 0 0.5 1.0 30 60 90 50% Power Angle : 115 Angle WL(nm) 80% 20% 40% 60% 100% 600400 500450 550 650 700 (RELATIVE RADIANT POWER) 750 5000K - 10000K CCT 3700K - 5000K CCT 2600K - 3700K CCT (RELATIVE LUMINOUS FLUX) (RELATIVE LUMINOUS FLUX) (RELATIVE LUMINOUS FLUX) 2.6 600

8 CLD-CT979.003 Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Mechanical Dimensions All dimensions are in mm. Notes RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Direc- tive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. ESD Protection AnodeCathode Heatsink Internal Circuit Heatsink Anode AnodeCathode Cathode

9 CLD-CT979.003 Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Kit Number System Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner:

10 CLD-CT979.003 Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Reliability Tests and Results Test Applicable Standards Test Condition Note Number of Damaged Temperature Cycle* JEITA ED-4701 100 105 30 mins, 5 mins, 30 mins, 5 mins 100 cycles 0/50 Thermal Shock* MIL-STD-202G -40°C~100°C 30 mins, 30 mins 100 cycles 0/50 Moisture Resistance JEITA ED-4701 200 203 25°C~65°C~ 90%RH 24hrs/1cycle 10 cycles 0/25 High Temperature Storage JEITA ED-4701 200 201 TA=100°C 1000 hrs 0/25 Temperature Humidity Storage JEITA ED-4701 100 103 TA=60°C RH=90% 1000 hrs 0/25 Low Temperature Storage JEITA ED-4701 200 202 TA=-40°C 1000 hrs 0/25 High Temperature Life Test* - TA=85°C IF=160 mA 1000 hrs 0/25 Life Test* - TA=25°C IF=350 mA 1000 hrs 0/25 High Humidity Heat Life Test* - 60°C RH=90% IF=250 mA 500 hrs 0/25 Low Temperature Life Test - Ta=-30°C IF=300 mA 1000 hrs 0/25 Resistance to Soldering Heat(Reflow Soldering)* JEITA ED-4701 300 301 Tsol=260(±5)°C,10sec (Pre treatment 30°C,70%,168hrs) 2 times 0/25 Solder ability (Reflow Soldering) JEITA ED-4701 300 303 TSOL=215±5°C, 3 sec (Lead Solder) 1 time (over 95%) 0/25 Vibration-variable Frequency MIL-STE-883 Method 2007 20G min, 20 to 2000Hz, 4cycles, 4mins, Each x,y,z 16 mins 0/25 Substrate Bending JEITA ED-4702 3mm, 5±1 sec 1 time 0/25 Adhesion Strength JEITA ED-4702 5N, 10±1 sec 1 time 0/25 Electrostatic Discharge Test MIL-STD-883 Method 2007 Human body model 1000 V +/-1 time 0/25 Items marked with * are selective. Failure Criteria Item Symbol Test Condition Criteria for Judgment Min. Max. Forward Voltage VF IF = 300 mA – Initial Data x 1.1 Reverse Current IR VR = 5 V - 100 μA Luminous Flux/Intensity ФV IF = 300 mA Initial Data x 0.7 - Resistance to Soldering Heat - IF = 300 mA No dead lamps and visual damage Vibration-variable Frequency - IF = 300 mA No dead lamps and visual damage

11 CLD-CT979.003 Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Soldering & Handling 1. Cleaning

• Don’t use unspecified chemical liquids to clean the SMD LED; the chemical could harm the SMD LED. When washing is necessary, please immerse the SMD LED in alcohol at normal room temperature for less than 1 minute and dry at normal room temperature for 15 minutes before use.
• The influence of ultrasonic cleaning on the SMD LED depending on factors such as ultrasonic power and the way SMD LED are mounted. Ultrasonic cleaning shall be pre-qualified to ensure this will not cause damage to the SMD LED. 2. Moisture-Proof Packing
• In order to prevent moisture absorption into SMD LED during the transportation and storage, SMD LED is packed in a moisture barrier bag. Desiccants and a humidity indicator are packed together with SMD LED as the secondary protection. The indication of humidity indicator card provides the information of humidity within SMD packing. 3. Storage
• Shelf life in original sealed bag at storage condition of <40ºC and <90%RH is 12 months. Baking is required whenever shelf life is expired.
• Before openning the packaging , Please check whether bag leak air or not.
• After bag opening, the SMD LED must be stored under the condition < 30ºC and < 60%RH. Under this condition, SMD LED must be used (subject to reflow) within 168 hours after bag opening, and re-baking is required when exceeding 168 hours.
• For baking, place SMD LED in oven at temperature 80ºC±5ºC and relative humidity <=10%RH, for 24 hours.
• Take out the material from packaging bag for re-bake. Do not open the door of oven frequently during the baking process. 4. Soldering
• Manual soldering by soldering iron
• The use of a soldering iron of less than 25W is recommended and the temperature of the iron must be kept at below 315ºC, with soldering time within 2 seconds.
• The epoxy resin of SMD LED should not be in contact with tip of soldering iron.
• No mechanical stress should be exerted on the resin portion of SMD LED during soldering.
• Handling of SMD LED should be done when the package has been cooled down to below 40ºC or less. This is to prevent the SMD LED failures due to thermal-mechanical stress during handling.
• Reflow Soldering: The temperature (top surface of SMD LED) profile is as below: Melting-point Pre-heat Soak Reflow Cooling Time Temperature Heat Sink Solder = Lead-free Average ramp-up rate = 4ºC/s max Peak temperature = 250ºC max. Preheat temperature = 150ºC ~200ºC Time within 5ºC of actual Peak Temperature = 10s max. Preheat time = 100s max. Duration above 217ºC is 80s max. Ramp-down rate = 6ºC/s max.

12 CLD-CT979.003 Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Copyright © 2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Packaging

• The boxes are not water-resistant, and they must be kept away from water and moisture.
• The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags.
• Cardboard boxes will be used to protect the LEDs from mechanical shocks during transportation.
• The reel pack is applied in SMD LED.
• Max 1100 pcs per reel.