CLMUD-FKA CREE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 10

Technical content

© 2021-2024 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo and the Cree LED logo are registered trademarks of Cree LED. CLD-CT1421 REV 4 CLMUD-FKA: PLCC4 3 in 1 SMD LED PRODUCT DESCRIPTION The CLMUD-FKA full-color RGB LED offers a high-intensity light output and a wide viewing angle. The compact 1.5mm x 1.5mm package allows for a very high resolution screen and is designed to work in a wide array of environmental conditions. Cree LED PLCC full-color RGB LEDs are suited for indoor video screen,decorative lighting and amusement applications.

FEATURES

  • Size (mm): 1.5 x 1.5
  • Dominant Wavelength Red (619 - 624nm) Green (520 - 540nm) Blue (460 - 475nm)
  • Luminous Intensity (mcd) Red (36 - 101)@ 5mA Green (126 - 252)@ 5mA Blue (22 - 45)@ 5mA
  • Moisture Sensitivity Level: 5a
  • Lead-Free
  • RoHS Compliant
  • Matte Surface

APPLICATIONS

  • Full-Color Video Screen
  • Decorative Lighting
  • Amusement

CLMUD-FKA: PLCC4 3 IN 1 SMD LED © 2021-2024 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo and the Cree LED logo are registered trademarks of Cree LED. CLD-CT1421 REV 4 ABSOLUTE MAXIMUM RATINGS (T A = 25°C) Items Symbol Absolute Maximum Rating Unit R G B Forward Current Note 1 IF 25 13 13 mA Peak Forward Current Note 2 IFP 70 50 50 mA Reverse Voltage VR 5 5 5 V Power Dissipation PD 60 50 50 mW Operation Temperature Topr -40 ~ +85 °C Storage Temperature Tstg -40 ~ +100 °C Junction Temperature TJ 110 110 110 °C Junction/ambient RTHJA 460 430 410 °C/W Junction/solder point RTHJS 250 270 250 °C/W Note: 1. Single-color light 2. Pulse width ≤0.1 msec, duty ≤1/10. TYPICAL ELECTRICAL & OPTICAL CHARACTERISTICS (T A = 25°C) Characteristics Condition Symbol Values Unit R G B Dominant Wavelength IF = 5mA λDOM 619~624 520~540 460~475 nm Spectral bandwidth at 50% IREL max IF = 5mA Δ λ 16 28 19 nm Forward Voltage IF = 5 mA VF(avg) 1.9 2.8 2.9 V VF(max) 2.4 3.4 3.4 V Luminous Intensity IF = 5 mA IV(min) 36 126 22 mcd IV(avg) 75 180 30 mcd Luminous Intensity(Reference) IF = 20/10/10 mA ΦV(avg) 250 260 45 mcd Reverse Current (max) VR = 5 V IR 10 10 10 μA * Continuous reverse voltage can cause LED damage.

CLMUD-FKA: PLCC4 3 IN 1 SMD LED © 2021-2024 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo and the Cree LED logo are registered trademarks of Cree LED. CLD-CT1421 REV 4 INTENSITY BIN LIMIT Red (5 mA) Green (5 mA) Blue (5 mA) L8 36 45 78 126 160 L6 22 28 3g3f 41 51 D 140 180 3m3k 25 32 L9 45 56 9a 160 202 L7 28 36 3e3d 51 64 E 180 224 3j3h 32 41 L 56 71 bc 202 252 L8 36 45 3c3b 64 81 A 71 90 3a4 81 101 * Tolerance of measurement of luminous intensity is ±10%. COLOR BIN LIMIT Red (5 mA) Green (5 mA) Blue (5 mA) RB 619 624 G7 520 525 B3 460 465 G23 522.5 527.5 B23 462.5 467.5 G8 525 530 B4 465 470 G45 527.5 532.5 B45 467.5 472.5 G9 530 535 B5 470 475 G67 532.5 537.5 Ga 535 540 * Tolerance of measurement of dominant wavelength is ±1 nm.

CLMUD-FKA: PLCC4 3 IN 1 SMD LED © 2021-2024 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo and the Cree LED logo are registered trademarks of Cree LED. CLD-CT1421 REV 4 ORDER CODE TABLE Kit Number Color Luminous Intensity (mcd) Dominant Wavelength (nm) Package Min. Max. Color Bin Min.(nm) Color Bin Max. (nm) CLMUD-FKA-CL83a478bcL6L8BB7a353 Red 36 101 RB 619 RB 624 Reel Green 126 252 G7 520 Ga 540 Reel Blue 22 45 B3 460 B5 475 Reel CLMUD-FKA-CL81781L61BB7D4C3 Red Any 1 Intensity bin from L8(36) - 3a4(101) RB 619 RB 624 Reel Green Any 1 Intensity bin from 78(126) - bc(252) Any 1 hue bin from G7(520)-Ga(540) Reel Blue Any 1 Intensity bin from L6(22) - L8(45) Any 1 hue bin from B3(460)-B5(475) Reel Notes:

  • The above kit numbers represent order codes that include multiple intensity-bin and color-bin codes. Only one intensity-bin code and one color-bin code will be shipped on each bulk. Single intensity-bin code and single color-bin codes will not be orderable.
  • Please refer to the HB LED Lamp Reliability Test Standards document for reliability test conditions.
  • Please refer to the HB LED Lamp Soldering & Handling document for information about how to use this LED product safely.

CLMUD-FKA: PLCC4 3 IN 1 SMD LED © 2021-2024 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo and the Cree LED logo are registered trademarks of Cree LED. CLD-CT1421 REV 4 GRAPHS The data below are collected from statistical figures that do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice.

CLMUD-FKA: PLCC4 3 IN 1 SMD LED © 2021-2024 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo and the Cree LED logo are registered trademarks of Cree LED. CLD-CT1421 REV 4 GRAPHS The data below are collected from statistical figures that do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice. The graph shows the maximum allowable DC current for a LED die of each color.

CLMUD-FKA: PLCC4 3 IN 1 SMD LED © 2021-2024 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo and the Cree LED logo are registered trademarks of Cree LED. CLD-CT1421 REV 4 MECHANICAL DIMENSIONS All dimensions are in mm. Tolerance of measurement of the dimension is ±0.1. NOTES RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree LED representative or from the Product Ecology section of the Cree LED website. Vision Advisory WARNING: Do not look at an exposed lamp in operation. Eye injury can result. 2 3 4

1 COMMON ANODE

2 CATHODE FOR Red

4 CATHODE FOR Blue

3 CATHODE FOR Green

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

CLMUD-FKA: PLCC4 3 IN 1 SMD LED © 2021-2024 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo and the Cree LED logo are registered trademarks of Cree LED. CLD-CT1421 REV 4 KIT NUMBER SYSTEM Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: C C C C C – D X G – X H H J J K K L L M M N N T C C C C C – Product Series D – Color G – Option S : Standoff N : No Standoff B : Black Face W : White Face A : Black Body C : Black Face and Black Side Wall T – Packaging Type 1 : Bulk Pack 2 : Ammo Pack 3 : Tape & Reel (Roll Pack) 4 : Tube Pack H – Red Color Min. Intensity Range H – Red Color Max. Intensity Range J – Green Color Min. Intensity Range J – Green Color Max. Intensity Range K – Blue Color Min. Intensity Range K – Blue Color Max. Intensity Range N – Blue Color Max. Wavelength Range N – Blue Color Min. Wavelength Range M – Green Color Max. Wavelength Range M – Green Color Min. Wavelength Range L – Red Color Max. Wavelength Range L – Red Color Min. Wavelength Range

CLMUD-FKA: PLCC4 3 IN 1 SMD LED © 2021-2024 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo and the Cree LED logo are registered trademarks of Cree LED. CLD-CT1421 REV 4 REFLOW SOLDERING

  • The CLMUD-FKA is rated as a MSL 5a product.
  • After opening the sealed bag,the SMD LED must be stored under the condition<30ºC and<60%RH. Under these conditions,the SMD LEDs must be used (subject to reflow) within 24 hours after bag opening, and baking 24-hour/80ºC is required when exceeding 24 hours.
  • Note that baking must only be done once.
  • The temperature profile is as below. Use only with CLMUD-FKA Solder Average ramp-up rate = 4ºC/s max Preheat temperature = 150ºC ~200ºC Preheat time = 120s max Ramp-down rate = 6ºC/s max Peak temperature = 250ºC max Time within 5ºC of actual Peak Temperature = 10s max Duration above 217ºC is 60s max NOTES
  • The packaging sizes of these SMD products are very small and the resin is still soft after solidification. Users are required to handle with care. Never touch the resin surface of SMD products.
  • To avoid damaging the product’s surface and interior device, it is recommended to choose a special nozzle to pick up the SMD products during the process of SMT production. If handling is necessary, take special care when picking up these products. The following method is necessary: Document No.: CREE-05-0057 Rev. NO. : 16 pick up SMD products during the process of SMT production . If handling is necessary, it should take more careful to pick up these products. The following two methods are necessary : Fig. 1a: For Small Top SMD Fig. 1b: For Mini side 0.8mm SMD  For Small Top SMD series , it is recommended to use rubber material Nozzle to pick up SMD products .Two figure size for reference : b.) Rectangle Nozzle: inner size: 1.3mm x 2.3mm, outer size > SMD size. 6. Electrostatic Discharge and Surge current  Electrostatic discharge (ESD) or surge current (EOS) may damage SMD LED.  Precautions such as ESD wrist strap, ESD shoe strap or antistatic gloves must be worn whenever handling of SMD LED.  All devices, equipment and machinery must be properly grounded.  It is recommended to perform electrical test to screen out ESD failures at final inspection.  It is important to eliminate the possibility of surge current during circuitry design 7. Heat Management Heat management of SMD LED must be taken into consideration during the design stage of SMD LED application. The current should be de-rated appropriately by referring to the de-rating curve attached on each product specification. Data is subject to change without prior notice. Document No.: COTCO-05-0057 Rev. NO. : 13 Melting-point Pre-heat Soak Reflow Cooling Time Temperature Use all SMD besides LP6-NPP1-01-N1 Solder = Sn63-Pb37 Solder = Lead-free Average ramp-up rate = 4ºC/s max. Average ramp-up rate = 4ºC/s max Preheat temperature = 100ºC ~150ºC Preheat temperature = 150ºC ~200ºC Preheat time = 100s max. Preheat time = 100s max. Ramp-down rate = 6ºC/s max. Ramp-down rate = 6ºC/s max. Peak temperature = 230ºC max. Peak temperature = 250ºC max. Time within 5ºC of actual Peak Temperature = 10s max. Time within 5ºC of actual Peak Temperature = 10s max. Duration above 183ºC is 80s max. Duration above 217ºC is 80s max. Only use LP6-NPP1-01-N1 [13] Solder = Low Lead-free Average ramp-up rate = 3ºC/s max. Preheat temperature = 130ºC ~170ºC Preheat time = 120s max. Ramp-down rate = 6ºC/s max. Peak temperature = 213ºC max. Time within 3ºC of actual Peak Temperature = 25s max. Duration above 200ºC is 40s max. Recommended solder pad design for heat dissipation (2-pin SMD LED): 0.5 7.5 7.0 4.5 2.6 1.5  Recommended solder pad design for heat dissipation (4-pin SMD LED)

CLMUD-FKA: PLCC4 3 IN 1 SMD LED © 2021-2024 Cree LED. The information in this document is subject to change without notice. Cree®, the Cree logo and the Cree LED logo are registered trademarks of Cree LED. CLD-CT1421 REV 4 PACKAGING

  • The CLMUD-FKA is rated as a MSL 5a product.
  • The boxes are not water resistant and they must be kept away from water and moisture.
  • The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags.
  • Cardboard boxes will be used to protect the LEDs from mechanical shocks during transportation.
  • The reel pack is applied in SMD LED.
  • Max 12800 pcs per reel.  C oba lt FreeC oba lt FreeC oba lt FreeC oba lt Free AAAAvoidvoidvoidvoid etaletaletaletal CCCC