CLL801-0101A7-27AM1A2 CITIZEN | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 14

Technical content

and are trademarks or registered trademarks of CITIZEN HOLDINGS CO., LTD. JAPAN. is a trademark or a registered trademark of CITIZEN ELECTRONICS CO., LTD. JAPAN. DATA SHEET CLL801-0101A7-27AM1A2 Ref.CE-P2021 05/12

  1. Scope of Application These specifications are applied to the ch ip type LED lamp , model CLL801-0101A7-27AM1A2 2. Part code CLL801-0101A7-27AM1A2 [1]Series CLL : LED for general lighting [2]Outline dimensions [3]Dies in series quantity 01 : 1 [4]Dies in parallel quantity 01 : 1 [5]Correlated color tem perature 27 : 2700K [6]Chromaticity range A : ANSI C78,377-2008 [7]CRI M1 : Ra Min 80 @Type Symbol CITILED CLL801-0101A7-27AM1A2 CITIZEN ELECTRONICS CO.,LTD. JAPAN Name DATA SHEET Ref.CE-P2021 05/12
  1. Outline drawing 4. Performance ( 1 ) Absolute Maximum Rating Unit Power Dissipation mW Forward Current mA Forward Pulse Current mA *1 Reverse Voltage V Operating Temperature C Storage Temperature C Junction Temperature C* 2 *1 Forward Current : Duty<=1/10 , Pulse Width<=10msec *2 D.C. Current : Tj = Tc + Rj-c × PD Pulse Current : Tj = Tc + Rj-c × Pw(Power Dissipation / One-Pulse) × Duty @@*Ts : Solder terminal(Cathode)temperature Symbol CITIZEN ELECTRONICS CO.,LTD. JAPAN DATA SHEET Parameter 120 TOP TST Tj Max CLL801-0101A7-27AM1A2 CITILED Name VR -30 \ +85 Raiting Value 105 Symbol PD IF IFP -40 \ +100 Unit Fmm Tolerance F}0.1mm Ref.CE-P2021 05/12

( 2 ) Electro-optical Characteristics T ‚“=25C Symbol Min. Typ. Max. Unit VF 2.9 3.2 3.5 V IR -- 1 0 0 µ A Rj-s*1 -1 5 0 - C / W φV 4.8 6.0 7.2 lm Ra 80 85 - - *1 Thermal Resistance : Junction - Solder terminal (Cathode) *1 The tolerance of measurement at our tester is VF±3% , φv±7% , Chromaticity(x,y)±0.01 *For an order, products within the rank listed above will be delivered. Except designation of a delivery proportion of each rank. Symbol Forward Voltage Reverse Current Thermal Resistance Luminous Flux Parameter Condition DATA SHEET CITIZEN ELECTRONICS CO.,LTD. JAPAN Junction-solder IF=20mA General Color Rendering Index Name CITILED IF=20mA IF=20mA VR=5V CLL801-0101A7-27AM1A2 Ranking (Condition : IF=20mA , Ts=25C) 00 Symbol Rank Min. Max. Unit Q 2.9 3.1 R 3.1 3.3 S 3.3 3.5 C 4.8 6.0 ‚c 6.0 7.2 Ch romaticity coordinates ( Condition : IF=20mA ,Ts=25C) xy xy 0.4688 0.4290 0.4813 0.4319 0.4562 0.4260 0.4688 0.4290 0.4468 0.4077 0.4585 0.4104 0.4585 0.4104 0.4703 0.4132 0.4688 0.4290 0.4813 0.4319 xy xy 0.4585 0.4104 0.4703 0.4132 0.4468 0.4077 0.4585 0.4104 0.4373 0.3893 0.4483 0.3919 0.4483 0.3919 0.4593 0.3944 VF V Luminous Flux φv Color Rank Color Rank Color RankColor Rank Parameter Forward Voltage lm Ref.CE-P2021 05/12

Name CLL801-0101A7-27AM1A2 CITIZEN ELECTRONICS CO.,LTD. JAPAN 0.38 0.39 0.40 0.41 0.42 0.43 0.44 x y x, y Chromaticity 3 4 Ref.CE-P2021 05/12

  1. Characteristics EForward Current vs. Forward Voltage EForward Current vs. Relative Luminous Intensity EForward Current vs. Chromaticity Coordinate ESolder Temperature vs. Chromaticity Coordinate ESolder Temperature vs. Forward Voltage ESolder Temperature vs. Relative Luminous Intensity Symbol CITIZEN ELECTRONICS CO.,LTD. JAPAN Name CLL801-0101A7-27AM1A2 DATA SHEET CITILED -0.020 -0.015 -0.010 -0.005 0.000 0.005 0.010 0.015 0.020 0 5 10 15 20 25 30 35 I F [mA] ‡™x,‡™y ‡™x ‡™y Ts=25C 20% 40% 60% 80% 100% 120% 140% 160% 0 5 10 15 20 25 30 35 I F [mA] Relative Luminous Intensity [a.u.] Ts=25C 2.6 2.7 2.8 2.9 3.0 3.1 3.2 3.3 3.4 3.5 0 5 10 15 20 25 30 35 I F [mA] VF [V] Ts=25C -0.020 -0.015 -0.010 -0.005 0.000 0.005 0.010 0.015 0.020 0 2 04 06 08 0 1 0 0 Ts [C] ‡™x,‡™y ‡™x ‡™y IF=20mA 2.8 2.9 3.0 3.1 3.2 3.3 3.4 3.5 0 2 04 06 08 0 1 0 0 Ts [C] VF [V] IF=20mA 20% 40% 60% 80% 100% 120% 02 0 4 0 6 0 8 0 1 0 0 Ts [C] Relative Luminous Intensity [a.u.] IF=20mA Ref.CE-P2021 05/12

ESolder Temperature vs. Allowable Forward Current ESpectrum EDirective Characteristic LED chip is mounted on White color PCB. Symbol DATA SHEET CITILED Name CITIZEN ELECTRONICS CO.,LTD. JAPAN CLL801-0101A7-27AM1A2 20% 40% 60% 80% 100% 120% 350 450 550 650 750 850 λ [nm] Relative Emission Intensity [a.u.] IF=20mA, Ts=25C 02 5 5 0 7 5 1 0 0 1 2 5 Ts [C] IF [‚A] IF=20mA@Ts=25Ž IF=20mA@Ts=25Ž 80‹ 70‹ 60‹ 50‹ -80‹ -70‹ -60‹ -50‹ 0.0 0.2 0.4 0.6 0.8 1.0 80‹ 70‹ 60‹ 50‹ -80‹ -70‹ -60‹ -50‹ Ref.CE-P2021 05/12

  1. Reliability (1) Details of the tests (2) Judgment Criteria of Failure for Reliability Test Ta=25C Symbol VF IR ƒÓV U defines the upper limit of the specified characteristics. S defines the initial value. Symbol Name CLL801-0101A7-27AM1A2 < S×0.7 @Ta=-40C 30minutes\`100C 30minuets, 100cycle IF=30mA Measuring Condition Judgment Criteria for Failure VF=5V CITILED IF=30mALuminous Flux >@U×2 Moisture-proof Test Measuring Item Forward Voltage @Ta=60C, 90%RH, 1000 hours @Ta=100C, 1000 hours Reverse Current CITIZEN ELECTRONICS CO.,LTD. JAPAN @Ta=-40C , 1000 hours @Ta=25C, IF=30mA , 1000 hours(with Al-fin) DATA SHEET > U×1.2 Low Temperature Storage Test Test Condition Thermal Shock Test High Temperature Storage Test Test Item Continuous Operation Test Ref.CE-P2021 05/12
  1. Taping Specifications (in accordance with JIS standard) (1) Shape and Dimensions of Reel (Unit: mm) (2) Dimensions of Tape (Unit: mm) (3) Configuration of Tape (4) Quantity: 2500pcs/reel Symbol CITILED Name DATA SHEET CLL801-0101A7-27AM1A2 CITIZEN ELECTRONICS CO.,LTD. JAPAN (END) (START) Unloaded tape Mounted with CITILEDmore than 40mm Leading part more than 400mm Ref.CE-P2021 05/12
  1. Packing Specifications 8-1. Moisture-proof Packing To prevent moisture absorption during transportation and storage, reels are packed in aluminum envelopes which contain a desiccant with a humidity indicator. 8-2. Storage To prevent moisture absorption, it is strongly recommended that reels (in bulk or taped) should be stored in the dry box (or the desiccator) with a desiccant as the appropriate storage place. If not, the following is recommended. Temperature : 5~30C Humidity : 60%RH max. The devices should be mounted as soon as possible after unpacking. If you store the unpacked reels, please store them in the dry box or seal them into the envelop again. Symbol DATA SHEET Name CLL801-0101A7-27AM1A2 CITILED CITIZEN ELECTRONICS CO.,LTD. JAPAN Aluminum envelop Desiccant Label Reel Polyester Zip fastener Ref.CE-P2021 05/12
  1. Precautions 9-1. Soldering @1) Following soldering paste is recommended Melting temperature : 216 ~ 220C. Composition : Sn 3.5Ag 0.75Cu @2 ) The temperature profile at the top surface of the parts is recommended as shown below. @3) It is requested that products should be handled after their temperature has dropped down to the normal room temperature 9-2. Washing (1) When washing after soldering is needed, following conditions are requested. @a) Washing solvent: Pure Water @b) Temperature, time: 50C or less × 30 seconds max. Symbol CITILED Name CLL801-0101A7-27AM1A2 CITIZEN ELECTRONICS CO.,LTD. JAPAN DATA SHEET (1) Lead free soldering 140sec 160 ~180°C 4°C/sec. Max Temperature Time 4°C/sec. Max 260 °C Max 220°C 60 ~70sec 3sec.M a x Ref.CE-P2021 05/12

9-3. Eye Safety - The International Electrical Commission (IEC) published in 2006 IEC 62471 ”2006 Photobiological safety oflamps and lamp system s ” which includes LEDs within its scope. When sorting single LEDs according to IEC 62471, most LEDs can be classified as belonging to either Exempt Group or Risk Group 1. - Optical characteristics of LEDs such as radiant flux, spectrum and light distribution are factors that affect the risk group determination of the LED, and especially a high-power LED, that emits light containing blue wavelengths, may have properties equivalent to those of Risk Group 2. - Great care should be taken when directly viewing an LED that is driven at high current, has multiple uses as a module or when fo cusing the light with optical instruments, as these actions may greatly in crease the hazard to your eyes. - In addition, LED sources that were included within the scope of IEC 60825-1 / Edition 1.2 “laser safety standard”, pu blished 2001 were removed from the scope of the IEC 60825-1 / Edition 2.0 revised 2007. - However, keep in mind that some countries and regions have adopted standards based on the IEC laser safety standard IEC 60825-1:2001 which includes LEDs within its scope. 9-4. Other directions (1) It is requested to avoid any stress added to the resin portion while it is heated. (2) It is requested to avoid any friction by sharp metal nail etc. to the resin portion. (3) If the product might to be used under the following conditions, the customer must evaluate its a ppropriateness them. This product is not designed for use under the following conditions. in places where the product might: - get wet due to rain - suffer from dama ge caused by salt. - be ex posed to corrosive gas such as Cl, H2S, NH3, SO2, Nox and so on. - be exposed to dust, fluid or oil. Symbol CITILED Name CLL801-0101A7-27AM1A2 CITIZEN ELECTRONICS CO.,LTD. JAPAN DATA SHEET Ref.CE-P2021 05/12

  1. Designing precautions 1. The current limiting resistor should be placed in the circuit so that is driven within its rating. Also avoid reverse voltage (over-current) applied instantaneously when ON or OFF. 2. When pulse driving current is applied, average current consumption should be within the rating. Also avoid reverse voltage applied when put off. 3. Recommended soldering pattern Unit : mm Mountability and solderability need to be optimized with actual conditions such as amount of solder, reflow temperature applied in the process. 4. When assembling the circuit board into the finished products, care must be taken to avoid the component parts from touching other parts. 5. When using multiple LEDs, it is required to connect a current limiting resistor on each path which the current flows to the LEDs. 6. Other This product complies with RoHS directives. @@ Symbol CITIZEN ELECTRONICS CO.,LTD. JAPAN CLL801-0101A7-27AM1A2 DATA SHEET < For reflow soldering > CITILED Name R RR RR RR Ref.CE-P2021 05/12
  1. Precautions with regard to product use 1. This document is provided for reference purposes only so that CITIZEN ELECTRONICS' products are used as intended. CITI ZEN ELECTRONICS neither makes warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to an y intellectual property rights or any any other rights of CITIZEN ELECTRONICS or any th ird party with respect to the information in this document. 2. All information included in this document such as product data, diagrams, charts, is current as of the date this document is issued. Such information, however, is subjec t to change without any prior notice. Before purchasing or using any CITIZEN ELECT RONICS' products listed in this document, please confirm the latest product informat ion with a CITIZEN ELECTRONICS' sales office, and formal specifications must be exchanged and signed by both parties prior to mass production. 3. CITIZEN ELECTRONICS has used reasonable care in compiling the information included in this document, but CITIZEN ELECTRONICS assumes no liabilit y whatsoever for any damages incurred as a result of errors or omissions in th e information included in this document. 4. Absent ‚ written signed agreement, except as provided in the relevant terms and conditions of sale for product, and to the maximum ex tent allowable by law, CITIZEN ELECTRONICS assumes no liability whatsoever, including withou t limitation, indirect, consequential, special, or incidental damages or loss, including without limitation, loss of profits, loss of opportunities, business interruption and loss of data, and discla ims any and all express or implied warranties and conditions related to sale, use of pr oduct, or information, including warranties or conditions of merchantability, fitness for a particular purpose, accuracy of information, or no infringement. 5. Though CITIZEN ELECTRONICS works continually to improve products' quality and reliability, products can malfunction or fail. Customers are responsible for complying with safety standards and for providing adequate designs and safe guards to minimize risk and avoid situations in which a malfunction or failure of a product could cause loss of human life, bodily injury or damage to property , including data loss or corruption. In addition, customers are also responsi ble for determining the appropriateness of use of any information contained in this docu ment such as application cases not only with evaluating by their own but also by the entire system. CITIZEN ELECTRONICS assumes no liability for customers' product design or applications. 6. Please contact CITIZEN ELECTRONICS' sales office if you have any questions regarding the information contained in this docume nt, or if you have any other inquiries. Symbol CITILED Name CLL801-0101A7-27AM1A2 CITIZEN ELECTRONICS CO.,LTD. JAPAN DATA SHEET Ref.CE-P2021 05/12