CLIP-ON LSTD | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

USA: +1.866.928.8181 Europe: +49.0.8031.2460.0 Asia: +86.755.2714.1166 www.lairdtech.com FINGERSTOCK GASKETS AND METAL GROUNDING PRODUCTS As the world’s leading fabricator of fingerstock, Laird has developed highly sophisticated, and often proprietary, shielding and grounding technology. Our innovations are necessary to achieve outstanding combinations of performance parameters. From a vast selection of product configurations, platings and mounting techniques, to a full range of low compression force requirements and high transfer impedance characteristics, there is a Laird gasket or grounding product just right for the job. This series from Laird is designed for use where high temperature or other design considerations preclude the use of adhesive-mounted gasketing. Yet it provides the same shielding characteristics and effectiveness as on Sticky Fingers® mounted series. Clip-On Gaskets offer shielding effectiveness >100 dB for 100 MHz plane wave. All are available in your choice of finishes. These 97-Series products are also available in UltraSoft® low compression force 98-Series. All dimensions shown are in inches (millimeters) unless otherwise specified. D F G MINI CLIP-ON 97-645/646 B D H E A F G CLIP-ON SERIES 97-603/604/605/606/607 CLIP-ON SERIES 97-610/611/612/613/614/615/616/618/619/620/621/622/623/624 97-627/628/629/630/631/632/633/634/640 CL Smallest Opening I 0.100 (2.540) Radius of Hole “D” LANCE DETAIL All Others Smallest Opening H F G A E D 0.080 (2.032) I K 0.050 (1.270) Semi-ellipse “D” Lance Recommended Hole Size CL 0.100 (2.540) J (Inside) VIEW 1 VIEW 2 B E J A D VIEW 3 B 97-618 97-621 97-622 97-623 97-65097-645 97-646 97-640 97-631 97-632 97-633 97-634 97-628 97-629 97-630 97-616 97-619 97-620 97-624 97-61297-611 97-613 97-615 97-627 97-610 97-614 97-603 97-604 97-605 97-606 97-607 *Variations in the clip-on area are available. Consult sales department. Clip-on Series Fingerstock Gaskets

SNAP-TITE® WITH “D” LANCE This configuration has been designed specifically to provide outstanding holding power. “D” lances snap into drilled or punched holes in the mounting surface to create a strong omni-directional grip with excellent conductivity. GRIP-TITE® WITH “T” LANCE Ideal for use with softer materials, such as aluminum or plated plastic. “T” lances bite into the mounting surface and preserve electrical conductivity. MINI CLIP-ON Laird’s Mini Clip-On (97-645/646) Gaskets are designed for use on today’s thinner, lighter materials.

  • Lowest compression force available in clip-on configuration
  • Virtually no compression set – 100% recovery of original height at up to 60% compression
  • “D” lance for extra holding power
  • Optimum conductivity and mechanical properties of beryllium copper
  • High cycle life – 50,000 cycles without fracture, wear, or compression set All dimensions shown are in inches (millimeters) unless otherwise specified. D F G MINI CLIP-ON 97-645/646 B D H E A F G CLIP-ON SERIES 97-603/604/605/606/607 CLIP-ON SERIES 97-610/611/612/613/614/615/616/618/619/620/621/622/623/624 97-627/628/629/630/631/632/633/634/640 CL Smallest Opening I 0.100 (2.540) Radius of Hole “D” LANCE DETAIL All Others Smallest Opening H F G A E D 0.080 (2.032) I K 0.050 (1.270) Semi-ellipse “D” Lance Recommended Hole Size CL 0.100 (2.540) J (Inside) VIEW 1 VIEW 2 B E J A D VIEW 3 B 97-618 97-621 97-622 97-623 97-65097-645 97-646 97-640 97-631 97-632 97-633 97-634 97-628 97-629 97-630 97-616 97-619 97-620 97-624 97-61297-611 97-613 97-615 97-627 97-610 97-614 97-603 97-604 97-605 97-606 97-607 *Variations in the clip-on area are available. Consult sales department. All dimensions shown are in inches (millimeters) unless otherwise specified. D F G MINI CLIP-ON 97-645/646 B D H E A F G CLIP-ON SERIES 97-603/604/605/606/607 CLIP-ON SERIES 97-610/611/612/613/614/615/616/618/619/620/621/622/623/624 97-627/628/629/630/631/632/633/634/640 CL Smallest Opening I 0.100 (2.540) Radius of Hole “D” LANCE DETAIL All Others Smallest Opening H F G A E D 0.080 (2.032) I K 0.050 (1.270) Semi-ellipse “D” Lance Recommended Hole Size CL 0.100 (2.540) J (Inside) VIEW 1 VIEW 2 B E J A D VIEW 3 B 97-618 97-621 97-622 97-623 97-65097-645 97-646 97-640 97-631 97-632 97-633 97-634 97-628 97-629 97-630 97-616 97-619 97-620 97-624 97-61297-611 97-613 97-615 97-627 97-610 97-614 97-603 97-604 97-605 97-606 97-607 *Variations in the clip-on area are available. Consult sales department. All dimensions shown are in inches (millimeters) unless otherwise specified. D F G MINI CLIP-ON 97-645/646 B D H E A F G CLIP-ON SERIES 97-603/604/605/606/607 CLIP-ON SERIES 97-610/611/612/613/614/615/616/618/619/620/621/622/623/624 97-627/628/629/630/631/632/633/634/640 CL Smallest Opening I 0.100 (2.540) Radius of Hole “D” LANCE DETAIL All Others Smallest Opening H F G A E D 0.080 (2.032) I K 0.050 (1.270) Semi-ellipse “D” Lance Recommended Hole Size CL 0.100 (2.540) J (Inside) VIEW 1 VIEW 2 B E J A D VIEW 3 B 97-618 97-621 97-622 97-623 97-65097-645 97-646 97-640 97-631 97-632 97-633 97-634 97-628 97-629 97-630 97-616 97-619 97-620 97-624 97-61297-611 97-613 97-615 97-627 97-610 97-614 97-603 97-604 97-605 97-606 97-607 *Variations in the clip-on area are available. Consult sales department. All dimensions shown are in inches (millimeters) unless otherwise specified. D F G MINI CLIP-ON 97-645/646 B D H E A F G CLIP-ON SERIES 97-603/604/605/606/607 CLIP-ON SERIES 97-610/611/612/613/614/615/616/618/619/620/621/622/623/624 97-627/628/629/630/631/632/633/634/640 CL Smallest Opening I 0.100 (2.540) Radius of Hole “D” LANCE DETAIL All Others Smallest Opening H F G A E D 0.080 (2.032) I K 0.050 (1.270) Semi-ellipse “D” Lance Recommended Hole Size CL 0.100 (2.540) J (Inside) VIEW 1 VIEW 2 B E J A D VIEW 3 B 97-618 97-621 97-622 97-623 97-65097-645 97-646 97-640 97-631 97-632 97-633 97-634 97-628 97-629 97-630 97-616 97-619 97-620 97-624 97-61297-611 97-613 97-615 97-627 97-610 97-614 97-603 97-604 97-605 97-606 97-607 *Variations in the clip-on area are available. Consult sales department. Clip-on Series Fingerstock Gaskets All dimensions shown are in inches (millimeters) unless otherwise specified.

EMI-DS-FINGERSTOCK-CLIP-ON 1213 Any information furnished by Laird and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for the use and application of Laird materials rests with the end user, since Laird and its agents cannot be aware of all potential uses. Laird makes no warranties as to the fitness, merchantability or suitability of any Laird materials or products for any specific or general uses. Laird, Laird Technologies, Inc or any of its affiliates or agents shall not be liable for incidental or consequential damages of any kind. All Laird products are sold pursuant to the Laird Technologies’ Terms and Conditions of sale in effect from time to time, a copy of which will be furnished upon request. © Copyright 2013 Laird Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Technologies Logo, and other marks are trademarks or registered trademarks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be the property of third parties. Nothing herein provides a license under any Laird or any third party intellectual property rights. VIEW SERIES A B C D E F G H LENGTH APPROX NO LANCE SQUARE LANCE GRIP-TITE® ‘T’ LANCE GRIP-TITE® ‘D’ LANCE LANCE LOCATIONS DIMENSIONS LANCE TO LANCE DIMS. BODY STYLE NL SQ GT ST I J K SLOT SOL. All dimensions shown are in inches (millimeters) unless otherwise specified. Clip-on Series Fingerstock Gaskets USA: +1.866.928.8181 Europe: +49.0.8031.2460.0 Asia: +86.755.2714.1166 www.lairdtech.com