CLI300 CLAIREX | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Clairex Technologies, Inc. 1301 East Plano Parkway Plano, Texas 75074-8524 Phone: 972-265-4900 Fax: 972-265-4949 www.clairex.com CLI300 Series IRED - Photosensor Photointerrupters electrical characteristics (TA = 25°C unless otherwise noted) symbol parameter min typ max units test conditions Input IRED, all devices VF Forward voltage - - 1.5 V I F = 10mA IR Reverse current - - 10 µA VR = 5V Output CLI325, CLI355 ID Collector-emitter dark current - - 100 nA V CE = 10V, Ee = 0 Output CLI375 ID Collector-emitter dark current - - 50 nA V CE = 10V, Ee = 0 Output CLI385 VCC Supply voltage 4 - 16 V ICC Supply current - - 12 mA V CC = 4.5V – 16V Clairex Technologies, Inc. March, 2005
features
- rugged plastic package
- hermetically sealed components
- various output configurations
description
The CLI300 series each consist of an IRED and photosensor mounted in a black plastic housing. Each device has 12 inch leads and two holes for bracket mounting in any position. Alternate output circuits and lead lengths are available. For assistance, call Clairex. absolute maximum ratings (TA = 25°C unless otherwise stated) IRED CLI325, CLI355 and CLI375 OUTPUT CLI385 OUTPUT(4) notes: 1. Derate linearly 1.07mW/°C fr om 25°C free air temperature to TA = +100°C. 2. 200mA when pulsed at 1.0ms, 10% duty cycle. 3. Derate linearly 2.13mW/°C fr om 25°C free air temperature to TA = +100°C. 4. Buffer output. Output is LOW when inpu t radiation is below threshold level. Clairex reserves the right to make changes at any time to improve design and to provide the best possible product. Revised 3/16/06
Clairex Technologies, Inc. 1301 East Plano Parkway Plano, Texas 75074-8524 Phone: 972-265-4900 Fax: 972-265-4949 www.clairex.com CLI300 Series IRED - Photosensor Photointerrupters Schematic Configurations RED BLUE BLACK YELLOW CLI325 RED BLUE BLACK YELLOW GREEN RED BLUE BLACK YELLOW CLI375CLI355 330 ohms 270 ohms CLI385 GREEN BLUE YELLOW RED BLACK * The CLI385 features an open collector, buffer, digital output. Other output functions such as inverter and internal 10K pull-up are available. Obtain a copy of the CLL Series data sheet from our website at www.clairex.com to see other available output configurations. Clairex Technologies, Inc. electrical characteristics (TA = 25°C unless otherwise noted) symbol parameter min typ max units test conditions Coupled CLI325 IL Sensor light current 3.0 - - mA I F = 10mA, VCE = 5V VCE(sat) Saturation voltage - - 1.2 V I F = 10mA, IC = 4mA tr, tf Output rise and fall time - 50 - µsec I C = 2.0mA, VCC=10V, RL = 100Ω Coupled CLI355 VCE(sat) Saturation voltage - - 1.2 V I F = 10mA, IC = 4mA IL Sensor light current 12.0 - - mA I F = 10mA, VCC = 5V VO Voltage output across 270Ω resistor 3.2 - - V I F = 10mA, VCC = 5V VOFF Voltage output across 270Ω resistor - - 0.4 V E e = 0 tr, tf Output rise and fall time - 300 - µsec I C = 2.0mA, VCC = 10V, RL =100Ω Coupled CLI375 VCE(sat) Saturation voltage - - 0.5 V I F = 20mA, IC = 1mA IL Sensor light current 1.0 - - mA I F = 10mA, VCE = 5V tr, tf Output rise and fall time - 5.0 - µsec I C = 2.0mA, VCC = 10V, RL =100Ω Coupled CLI385 (VCC = 5V unless otherwise noted) VOL Low level output voltage - - 0.4 V IOL = 15mA, IF = 0(6) IOH High level output leakage - - 5.0 µA I F = 15mA, VOH = 18V IF+ IRED positive going threshold (7) 10 - - mA IF+/IF - Hysteresis ratio - 1.2 - tr, tf Output rise and fall time - 75 - ns tPLH Propagation delay, low to high - 6.0 - µs tPHL Propagation delay, high to low - 6.0 - µs IF = 0(6) or 15mA, f = 10kHz, Duty Cycle = 50%, RL = 240Ω, CL = 15pF note: 6. IF = 0 equates to light path being blocked by opaque object. 7. Minimum current applied to IRED to cause output to change state. Clairex reserves the right to make changes at any time to improve design and to provide the best possible product