CLE230W CLAIREX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 1

Technical content

Clairex Technologies, Inc. 1301 East Plano Parkway Plano, Texas 75074-8524 Phone: 972-265-4900 Fax: 972-265-4949 www.clairex.com 0.147 (3.73) 0.137 (3.48) CATHODE ANODE 0.205 (5.21) 0.215 (5.46) 0.190 (4.83) 0.176 (4.47) 0.100 (2.54) dia. 0.165 (4.19) 0.145 (3.68) 0.025 (0.64) max. 0.019 (0.48) 0.016 (0.41) 1.00 (25.4) min. 0.010 (0.25) max 0.136 (3.45) 0.156 (3.96) CLE230W, CLE231W, CLE232W High Power Aluminum Gallium Arsenide IREDs Clairex Technologies, Inc. July, 2001 ALL DIMENSIONS ARE IN INCHES (MILLIMETERS)

features

  • wide emission angle
  • TO-46 hermetically sealed package
  • excellent heat dissipation
  • high power output

description

The CLE230W series are AlGaAs infrared emitting diodes mounted in flat window TO-46 hermetic packages. The wide emission angle provides even illumination over a large area. The series are spectrally and mechanically matched to the CLT130W phototransistor series. For additional information, call Clairex. absolute maximum ratings (TA = 25°C unless otherwise stated) notes: 1. 0.06” (1.5mm) from the header for 5 seconds maximum. Maximum temperature can be 260°C if wave soldering. 2. Derate linearly 0.80mA/°C fr om 25°C free air temperature to TA = +125°C. 3. Derate linearly 1.6mW/°C fr om 25°C free air temperature to TA = +125°C. Clairex reserves the right to make changes at any time to improve design and to provide the best possible product. electrical characteristics (TA = 25°C unless otherwise noted) symbol parameter min typ max units test conditions 1.5 - - 3.5 - - Ee Irradiance(4,5) CLE230W CLE231W CLE232W 5.0 - - mW/cm2 IF = 100mA VF Forward voltage (4,5) - - 2.0 V I F = 100mA IR Reverse current - - 10 µA VR = 3.0V λP Peak emission wavelength - 890 - nm I F = 100mA BW Spectral bandwidth at half power points - 80 - nm I F = 100mA ΘHP Emission angle at half power points - 70 - deg. I F = 100mA tr Output rise time - 500 - ns I F = 100mA tf Output fall time - 250 - ns I F = 100mA note: 4. Ee is a measure of irradiance (power/unit area) within a .25” (6.35mm) diameter area, centered on the mechanical axis of the device and spaced .466” (11.8mm) from the lens side of the tab. This is geometrically equivalent to a 30° cone. 5. Measurement taken at trailing edge of 100µs pulse with a duty cycle of 0.1%. Revised 12/01/04