CLE135 CLAIREX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Clairex Technologies, Inc. 1301 East Plano Parkway Plano, Texas 75074-8524 Phone: 972-265-4900 Fax: 972-265-4949 www.clairex.com CLE135, CLE130E, CLE130W 940nm High Efficiency GaAs/AlGaAs IREDs Clairex Technologies, Inc. July, 2005 Clairex reserves the right to make changes at any time to improve design and to provide the best possible product. 0.147 (3.73) 0.137 (3.48) 0.205 (5.21) 0.215 (5.46) 0.100 (2.54) dia. 0.025 (0.64) max. 1.00 (25.4) min. 0.190 (4.83) 0.176 (4.47) 0.165 (4.19) 0.145 (3.68) 0.019 (0.48) 0.016 (0.41) 0.156 (3.96) 0.136 (3.45) CATHODE ANODE 0.050 (1.27) nom 1.00 (25.4) min. 0.019 (0.48) 0.016 (0.41) 0.147 (3.73) 0.137 (3.48) ANODE CATHODE 0.010 (0.25) nom 0.213 (5.41) 0.207 (5.26) 0.100 (2.54) pin circle 0.130 (3.30) max 0.050 (1.27) max 0.169 (4.29) 0.163 (4.14) 0.147 (3.73) 0.137 (3.48) 0.205 (5.21) 0.215 (5.46) 0.100 (2.54) dia. 0.025 (0.64) max. 1.00 (25.4) min. 0.190 (4.83) 0.176 (4.47) 0.165 (4.19) 0.145 (3.68) 0.019 (0.48) 0.016 (0.41) 0.156 (3.96) 0.136 (3.45) 0.010 (0.25) max CATHODE ANODE ALL DIMENSIONS ARE IN INCHES (MILLIMETERS) CLE135 CLE130E CLE130W REVISED 4/15/06 UPGRADED SERIES

Clairex Technologies, Inc. 1301 East Plano Parkway Plano, Texas 75074-8524 Phone: 972-265-4900 Fax: 972-265-4949 www.clairex.com CLE135, CLE130E, CLE130W 940nm High Efficiency GaAs/AlGaAs IREDs Clairex Technologies, Inc. Clairex reserves the right to make changes at any time to improve design and to provide the best possible product.

features

  • higher power output
  • cathode connected to case
  • TO-46 header with three lens options
  • different package styles provide flexible design options

description

The original Clairex CLE130 series has been upgraded. The new series features current state of the art GaAs/AlGaAs technology for increased quantum efficiency. The chip substrate is N type material resulting in the case being common to the cathode. The original configuration can still be supplied as a special order. Three different lens options are offered. Contact Clairex for other electrical and package options. absolute maximum ratings (TA = 25°C unless otherwise stated) storage temperature operating temperature lead soldering temperature notes: 1. 0.06” (1.5mm) from the header for 5 seconds maximum. 2. Derate linearly 0.80mA/°C fr om 25°C free air temperature to T A = +125°C. 3. Derate linearly 1.60mW/°C fr om 25°C free air temperature to TA = +125°C. electrical characteristics (TA = 25°C unless otherwise noted) symbol parameter min typ max units test conditions CLE130 Series VF Forward voltage - 1.5 1.8 V I F = 100mA IR Reverse current - - 10 µA V R = 3V λp Peak wavelength - 940 - nm I F = 100mA BW Spectral bandwidth - 50 - nm I F = 20mA tr, tf Output rise and fall time - 700 - ns I F = 100mA CLE130E PO Total output power - 12.5 - mW I F = 100mA PO Total output power 2.0 2.5 - mW I F = 20mA θHP Emission angle at half power points - 80 - deg. I F = 20mA CLE130W PO Total output power - 10 - mW I F = 100mA PO Total output power 1.5 2.0 - mW I F = 20mA θHP Emission angle at half power points - 70 - deg. I F = 20mA CLE135 PO Total output power - 10 - mW I F = 100mA Ee Irradiance (4) - 2.0 - mW/cm 2 I F = 100mA Ee Irradiance (4) 0.4 0.5 - mW/cm 2 I F = 20mA θHP Emission angle at half power points - 22 - deg. I F = 20mA note: 4. Ee is a measure of irradiance (power/unit area) within a 0.444" (1.128cm) diameter area, centered on the mechanical axis of the device and spaced 2.54" (6.45cm) from the lens side of the tab. This is geometrically equivalent to a 10° cone.