CLC006 NSC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 12

Technical content

Features

n No external pull-down resistors n Adjustable output amplitude n Differential input and output n Low power dissipation n Single +5V or −5.2V supply n Replaces GS9008 in most applications

Applications

n Digital routers and distribution amplifiers n Coaxial cable driver for digital transmission line n Twisted pair driver n Serial digital video interfaces for the commercial and broadcast industry n SMPTE, Sonet/SDH, and ATM compatible driver n Buffer applications Connection Diagram (8-Pin SOIC) Typical Application DS100084-1 DS100084-3 Order Number CLC006AJE See NS Package Number M08A DS100084-2 August 1998 CLC006 Serial Digital Cable Driver with Adjustable Outputs © 1998 National Semiconductor Corporation DS100084 www.national.com

Absolute Maximum Ratings(Note 1) If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Supply Voltage 6V Output Current 30 mA Maximum Junction Temperature +125˚C Storage Temperature Range −65˚C to +150˚C Lead Temperature (Soldering 10 seconds) +300˚C ESD Rating (Human Body Model) 1000V Package Thermal Resistance θ JA Surface Mount AJE 125˚C/W θJC Surface Mount AJE 105˚C/W Reliability Information Transistor count 72 MTTF 254 Mhr Recommended Operating Conditions Supply Voltage Range (VCC –V EE ) +4.5V to +5.5V Electrical Characteristics(VCC = 0V, VEE = −5V; unless otherwise specified). Parameter Condition Typ +25˚C Min/Max +25˚C Min/Max 0˚C to +70˚C Min/Max -40˚C to +85˚C Units STATIC DC PERFORMANCE Supply Current, Loaded 150 Ω @ 270 Mbps (Notes 5, 7) 37 - - - mA Supply Current, Unloaded (Note 3) 34 28/37 26/39 26/39 mA Input Bias Current (Note 4) 10 30 50 50 µA Output Swing R Output Swing R EXT =1 0kΩ (Note 5) 1.30 - - - V Common Mode Input Range Upper Limit −0.7 −0.8 −0.8 −0.8 V Common Mode Input Range Lower Limit −2.6 −2.5 −2.5 –2.5 V Minimum Differential Input Swing (Note 5) 200 200 200 200 mV Power Supply Rejection Ratio (Note 3) 26 20 20 20 dB AC PERFORMANCE Output Rise and Fall Time (Notes 3, 6, 7) 650 425/825 400/850 400/850 ps Overshoot (Note 5) 5 % Propagation Delay (Note 5) 1.0 ns Duty Cycle Distortion (Note 5) 50 ps Residual Jitter (Note 5) 25 - - - ps pp MISCELLANEOUS PERFORMANCE Input Capacitance (Note 5) 1.0 pF Output Resistance (Note 5) 10 Ω Output Inductance (Note 5) 6 nH Note 1:“Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. They are not meant to imply that the devices should be operated at these limits. The table of “Electrical Characteristics” specifies conditions of device operation. Note 2:Min/Max ratings are based on product characterization and simulation. Individual parameters are tested as noted. Outgoing quality levels are determined from tested parameters. Note 3:Spec is 100% tested at +25˚C, sample tested at +85˚C. Note 4:Spec is 100% tested at +35˚C at wafer probe. Note 5:Spec is guaranteed by design. Note 6:Measured between the 20% and 80% levels of the waveform. Note 7:Measured with both outputs driving 150Ω , AC coupled at 270 Mbps. www.national.com 2

PCB Layout Recommendations Printed circuit board layout affects the performance of the CLC006. The following guidelines will aid in achieving satis- factory device performance.

  • Use a ground plane or power/ground plane sandwich de- sign for optimum performance.
  • Bypass device power with a 0.01 µF monolithic ceramic capacitor in parallel with a 6.8 µF tantalum electrolytic ca- pacitor located no more than 0.1″ (2.5 mm) from the de- vice power pins.
  • Provide short, symmetrical ground return paths for: — inputs, — supply bypass capacitors and — the output load.
  • Provide short, grounded guard traces located — under the centerline of the package, — 0.1″ (2.5 mm) from the package pins — on both top and bottom of the board with connecting vias. EVALUATION BOARD A schematic, parts list and layout for a suitable evaluation board are given on the following page. The artwork includes trace, silk screen and ground layers. The individual printed circuit board is available unassembled from National Semi- conductor.To order this evaluation board, part number CLC730056, contact your local sales representative or the National Semiconductor Customer Response Center in your area.(This evaluation board is identical to that for the CLC007 for which some of the listed parts are not re- quired.) The evaluation board is a guide to proper circuit layout and makes prototyping and measurement-taking easy. Since the board is designed to accommodate many of the application circuits possible with the CLC006, your particular application may not require all of the listed parts or may require different values. The evaluation board may be powered from standard ECL supply voltages by installing the two jumpers in the lo- cations labeled “−5”. For PECL supply voltages, install the jumpers in the locations labeled “+5”. DS100084-17 CLC006 Evaluation Board Schematic www.national.com 8

PCB Layout Recommendations (Continued) Item Reference Designator Part Description Qty 1 C1, C2, C8, C9 0.1 µF SMD Capacitor, Size 1206 4

2 C5, C60 33 pF SMD Capacitor, Size 1206 2

3 C7, C10, C13, C14 0.01 µF SMD Tantalum Capacitor, Size 12062 4 4 C11, C12 6.8 µF SMD Tantalum Capacitor, Size 6032 2

5 J1, J2 BNC PC Amphenol #31-5329-52RFX 2

6 J3, J4 BNC PC Amphenol #31-5329-72RFX 2

7 R3, R1 124 Ω SMD Resistor, Size 1206 2

8 R4, R5 82.5 Ω SMD Resistor, Size 1206 2

9 R6, R7 75 Ω SMD Resistor, Size 1206 2

10 R11 2.4 k Ω SMD Resistor, Size 1206 1

11 R12 3 k Ω SMD Resistor, Size 1206 1

12 U1 CLC006AJE Cable Driver 1

13 +5, −5 Jumper 4

14 VR1 10 k Ω Potentiometer, Bourns 3299 1

9 www.national.com

PCB Layout Recommendations (Continued) DS100084-18 DS100084-19 DS100084-20 DS100084-21 www.national.com 10

Physical Dimensionsinches (millimeters) unless otherwise noted LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DE- VICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMI- CONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or sys- tems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose fail- ure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 2. A critical component in any component of a life support device or system whose failure to perform can be rea- sonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. National Semiconductor Corporation Americas Tel: 1-800-272-9959 Fax: 1-800-737-7018 Email: support@nsc.com www.national.com National Semiconductor Europe Fax: +49 (0) 1 80-530 85 86 Email: europe.support@nsc.com Deutsch Tel: +49 (0) 1 80-530 85 85 English Tel: +49 (0) 1 80-532 78 32 Français Tel: +49 (0) 1 80-532 93 58 Italiano Tel: +49 (0) 1 80-534 16 80 National Semiconductor Asia Pacific Customer Response Group Tel: 65-2544466 Fax: 65-2504466 Email: sea.support@nsc.com National Semiconductor Japan Ltd. Tel: 81-3-5620-6175 Fax: 81-3-5620-6179 Order Number CLC006AJE CLC006 Serial Digital Cable Driver with Adjustable Outputs National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.