CL50GRXALS3NQ

CL50 BANNER | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

Multi-Color General Purpose or Audible Indicators

• Rugged, cost-effective, and easy-to-install multi-color indicators
• Illumination provides easy-to-see operator guidance and equipment status indication
• 1-, 2-, or 3-color models available
• Available in black or light gray housing
• Audible models available with standard, sealed, or omni-directional audible element
• Continuous, pulsed, and staccato tones available
• 18 V to 30 V dc operation
• Compact devices are completely self-contained, no controller needed
• No assembly required Non-Audible Models Models1 # of LED Colors LED Colors2 Connection3 Inputs Color 1 Color 2 Color 3 CL50GXXPQ Green - - Integral 4-pin M12/Euro-style quick disconnect PNP CL50GXXNQ Green - - NPN CL50XRXPQ - Red - PNP CL50XRXNQ - Red - NPN CL50GRXPQ Green Red - PNP CL50GRXNQ Green Red - NPN CL50GRYPQ Green Red Yellow PNP CL50GRYNQ Green Red Yellow NPN Audible Models Standard Audible Models1 # of LED Colors LED Colors 2 Connection3 Inputs Color 1 Color 2 Color 3 CL50GXXAPQ Green – – Integral 5-pin M12/Euro-style quick disconnect PNP CL50GXXANQ Green – – NPN CL50XRXAPQ – Red – PNP CL50XRXANQ – Red – NPN CL50GRXAPQ Green Red – PNP CL50GRXANQ Green Red – NPN CL50GRYAPQ Green Red Yellow PNP CL50GRYANQ Green Red Yellow NPN Sealed Audible Models 1 # of LED Colors LED Colors 2 Connection3 Inputs Continuous Pulsed at 1.6 Hz Staccato Color 1 Color 2 Color 3 CL50GXXALSPQ CL50GXXALS3PQ CL50GXXALS4PQ Green - - Integral 5-pin M12/Euro-style quick disconnect PNP CL50GXXALSNQ CL50GXXALS3NQ CL50GXXALS4NQ Green - - NPN CL50XRXALSPQ CL50XRXALS3PQ CL50XRXALS4PQ - Red - PNP CL50XRXALSNQ CL50XRXALS3NQ CL50XRXALS4NQ - Red - NPN CL50GRXALSPQ CL50GRXALS3PQ CL50GRXALS4PQ Green Red - PNP CL50GRXALSNQ CL50GRXALS3NQ CL50GRXALS4NQ Green Red - NPN CL50GRYALSPQ CL50GRYALS3PQ CL50GRYALS4PQ 3 Green Red Yellow PNP 1 Models with black housing are listed. For gray housing, add the suffix "C" at the end of the cabled model number or before the "Q" of quick disconnect model numbers. For example, CL50GXXAPC or CL50GXXAPCQ. 2 Available colors include: Green (G), Red (R), Yellow (Y), Blue (B), and White (W). Contact Banner Engineering for other colors and color combinations. 3 • To order the 150 mm (6 in) PVC cable model with a M12/Euro-style quick disconnect, replace the suffix "Q" with "QP" in the model number. For example, CL50GXXAPQP.
• To order the 2 m (6.5 ft) PVC cable model, omit the suffix "Q" in the model number. For example, CL50GXXAP.
• Models with a quick disconnect require a mating cordset. CL50 Column Light Original Document 145315 Rev. O

7 May 2019

# of LED Colors LED Colors 2 Connection3 Inputs Continuous Pulsed at 1.6 Hz Staccato Color 1 Color 2 Color 3 CL50GRYALSNQ CL50GRYALS3NQ CL50GRYALS4NQ Green Red Yellow NPN Omni-Directional Sealed Audible Models 1 # of LED Colors LED Colors 2 Connection3 Inputs Continuous Pulsed at 1.6 Hz Staccato Color 1 Color 2 Color 3 CL50GXXAOSPQ CL50GXXAOS3PQ CL50GXXAOS4PQ Green - - Integral 5-pin M12/Euro-style quick disconnect PNP CL50GXXAOSNQ CL50GXXAOS3NQ CL50GXXAOS4NQ Green - - NPN CL50XRXAOSPQ CL50XRXAOS3PQ CL50XRXAOS4PQ - Red - PNP CL50XRXAOSNQ CL50XRXAOS3NQ CL50XRXAOS4NQ - Red - NPN CL50GRXAOSPQ CL50GRXAOS3PQ CL50GRXAOS4PQ Green Red - PNP CL50GRXAOSNQ CL50GRXAOS3NQ CL50GRXAOS4NQ Green Red - NPN CL50GRYAOSPQ CL50GRYAOS3PQ CL50GRYAOS4PQ Green Red Yellow PNP CL50GRYAOSNQ CL50GRYAOS3NQ CL50GRYAOS4NQ Green Red Yellow NPN Omni-Directional Sealed Audible Models with Intensity Adjustment 1 # of LED Colors LED Colors 2 Connection3 Inputs Continuous Pulsed at 1.6 Hz Staccato Color 1 Color 2 Color 3 CL50GXXAOSIPQ CL50GXXAOS3IPQ CL50GXXAOS4IPQ Green - - Integral 5-pin M12/Euro-style quick disconnect PNP CL50GXXAOSINQ CL50GXXAOS3INQ CL50GXXAOS4INQ Green - - NPN CL50XRXAOSIPQ CL50XRXAOS3IPQ CL50XRXAOS4IPQ - Red - PNP CL50XRXAOSINQ CL50XRXAOS3INQ CL50XRXAOS4INQ - Red - NPN CL50GRXAOSIPQ CL50GRXAOS3IPQ CL50GRXAOS4IPQ Green Red - PNP CL50GRXAOSINQ CL50GRXAOS3INQ CL50GRXAOS4INQ Green Red - NPN CL50GRYAOSIPQ CL50GRYAOS3IPQ CL50GRYAOS4IPQ Green Red Yellow PNP CL50GRYAOSINQ CL50GRYAOS3INQ CL50GRYAOS4INQ Green Red Yellow NPN Wiring Diagrams — Non-Audible Models PNP Input KEY 1 = Brown 2 = White 3 = Blue 4 = Black Indicator Color 18-30V dc NPN Input KEY 1 = Brown 2 = White 3 = Blue 4 = Black Indicator Color 18-30V dc Key4 1 = Brown 2 = White 3 = Blue 4 = Black C1 = Color 1 C2 = Color 2 C3 = Color 3 Wiring Diagrams — Audible Models PNP Input KEY 1 = Brown 2 = White 3 = Blue 4 = Black 5 = Gray Indicator Color A 18-30V dc NPN Input KEY 1 = Brown 2 = White 3 = Blue 4 = Black 5 = Gray Indicator Color A 18-30V dc Key4 1 = Brown 2 = White 3 = Blue 4 = Black 5 = Gray C1 = Color 1 C2 = Color 2 C3 = Color 3 A = Audible 4 If there is an "X" in the model number, the corresponding wire will not be used. CL50 Column Light 2 www.bannerengineering.com - Tel: + 1 888 373 6767 P/N 145315 Rev. O

Functional Truth Table: PNP Models LED Function Pin 4 (Black Wire) Pin 1 (Brown Wire) Pin 2 (White Wire) Color 1 On +V dc Pin 3 (blue wire) connected to ground (–) . Alarm models: Alarm function is independent of light functions. Color 2 On +V dc Color 3 On +V dc Color 3 On (color 3 inhibits color 1) +V dc +V dc Color 2 On (color 2 inhibits color 1) +V dc +V dc Color 3 On (color 3 inhibits color 2) +V dc +V dc Color 3 On (color 3 inhibits colors 1 & 2) +V dc +V dc +V dc Functional Truth Table: NPN Models LED Function Pin 4 (Black Wire) Pin 3 (Blue Wire) Pin 2 (White Wire) Color 1 On –V dc Pin 1 (brown wire) connected to +V dc. Alarm models: Alarm function is independent of light functions. Color 2 On –V dc Color 3 On –V dc Color 3 On (color 3 inhibits color 1) –V dc –V dc Color 2 On (color 2 inhibits color 1) –V dc –V dc Color 3 On (color 3 inhibits color 2) –V dc –V dc Color 3 On (color 3 inhibits colors 1 & 2) –V dc –V dc –V dc Specifications Supply Voltage and Current

18 V dc to 30 V dc

Indicators–maximum current per LED color:

• 100 mA at 18 V dc
• 70 mA at 30 V dc Standard Audible Alarm: 25 mA maximum current Sealed Audible Alarm: 35 mA maximum current Omni-Directional Sealed Audible Alarm: 45 mA maximum current Supply Protection Circuitry Protected against reverse polarity and transient voltages Indicator Response Time Indicator On/Off: 10 milliseconds maximum Audible Alarm Standard Audible Alarm: 2.7 KHz ± 500 Hz oscillation frequency; maximum intensity 92 db at 1 meter (3.3 ft) (typical) Sealed Audible Alarm: 2.9 KHz ± 250 Hz oscillation frequency; maximum intensity 94 db at 1 meter (3.3 ft) (typical) Omni-Directional Sealed Audible Alarm: 2.1 KHz ± 250 Hz oscillation frequency; maximum intensity 99 db at 1m (3.3 ft) (typical) Omni-Directional Sealed Audible Alarm with Intensity Adjustment: 2.1 KHz ± 250 Hz oscillation frequency; maximum intensity 95 dB at 1m (3.3 ft) (typical) Indicators LEDs or audible are independently selected Indicator Characteristics Color Dominant Wavelength (nm) or Color Temperature (CCT) Lumen Output (Typical at 25 °C) Green 525 nm 72 Red 625 nm 38 Yellow 590 nm 30 Blue 475 nm 28 White 5000 K 85 Audible Adjustment Standard Audible Alarm: Unscrew the cover (up to 1.5 turns maximum) to adjust the audible intensity. Do not exceed 1.5 turns or the cover may detach during operation. For maximum intensity, rotate the center plug 180° counterclockwise to remove it. Sealed Audible Alarm and Omni-Directional Sealed Audible Alarm with Intensity Adjustment: Rotate the front cover until the desired intensity is reached Typical Reduction in Sound Intensity with Audible Adjustment (maximum to minimum):
• Standard Audible: 30 dB
• Sealed Audible: 20 dB
• Omni-Directional Sealed Audible: 12 dB Construction Bases and Covers: ABS Light Segment: Polycarbonate Vibration and Mechanical Shock Meets IEC 60068-2-6 requirements (Vibration: 10 Hz to 55 Hz, 1.0 mm amplitude, 5 minutes sweep, 30 minutes dwell) Meets IEC 60068-2-27 requirements (Shock: 30G 11 ms duration, half sine wave) Operating Conditions Non-Audible: –40 °C to +50 °C (–40 °F to +122 °F) Standard and Sealed Audible: –20 °C to +50 °C (–4 °F to +122 °F) 95% at +50 °C maximum relative humidity (non-condensing) Environmental Rating UL Type 4X Indoor and UL Type 13 Non-Audible and Sealed Audible: IEC IP67 Standard Audible: IEC IP50 Certifications Connections Integral 4-pin or 5-pin M12/Euro-style quick disconnect, 150 mm (6 in) PVC cable with a M12/Euro-style quick disconnect, or 2 m (6.5 ft) integral PVC cable, depending on model Models with a quick disconnect require a mating cordset Required Overcurrent Protection WARNING: Electrical connections must be made by qualified personnel in accordance with local and national electrical codes and regulations. Overcurrent protection is required to be provided by end product application per the supplied table. Overcurrent protection may be provided with external fusing or via Current Limiting, Class 2 Power Supply. Supply wiring leads < 24 AWG shall not be spliced. For additional product support, go to www.bannerengineering.com. Supply Wiring (AWG) Required Overcurrent Protection (Amps) 20 5.0 22 3.0 24 2.0 26 1.0 28 0.8 30 0.5 CL50 Column Light P/N 145315 Rev. O www.bannerengineering.com - Tel: + 1 888 373 6767 3

M30 X 1.5(Mounting Nut Included) H 19[0.75] 8.3[0.33] ø50[1.97] Internal Threads1/2-14 NPSMMax Torque 2.25 Nm[20 in-lbs] Column Light Height (H) Non-Audible 114.2mm (4.5 in) Standard Audible* 145.3mm (5.7 in) Sealed Audible 168.2mm (6.6 in) Omni-Directional Sealed Audible 182.2mm (7.2 in) *Column Light (H) with top unscrewed approximately 3.5 mm to allow sound to escape All measurements are listed in millimeters [inches], unless noted otherwise. Accessories Cordsets 4-Pin Threaded M12/Euro-Style Cordsets—Single Ended Model Length Style Dimensions Pinout (Female) MQDC-406 1.83 m (6 ft) Straight 44 Typ. ø 14.5 M12 x 1 1 = Brown 2 = White 3 = Blue 4 = Black MQDC-415 4.57 m (15 ft) MQDC-430 9.14 m (30 ft) MQDC-450 15.2 m (50 ft) MQDC-406RA 1.83 m (6 ft) Right-Angle 32 Typ.[1.26"] 30 Typ.[1.18"] ø 14.5 [0.57"] M12 x 1 MQDC-415RA 4.57 m (15 ft) MQDC-430RA 9.14 m (30 ft) MQDC-450RA 15.2 m (50 ft) 5-Pin Threaded M12/Euro-Style Cordsets—Single Ended Model Length Style Dimensions Pinout (Female) MQDC1-501.5 0.50 m (1.5 ft) Straight 44 Typ. ø 14.5 M12 x 1 2 1 = Brown 2 = White 3 = Blue 4 = Black 5 = Gray MQDC1-506 1.83 m (6 ft) MQDC1-515 4.57 m (15 ft) MQDC1-530 9.14 m (30 ft) MQDC1-506RA 1.83 m (6 ft) Right-Angle 32 Typ.[1.26"] 30 Typ.[1.18"] ø 14.5 [0.57"] M12 x 1 MQDC1-515RA 4.57 m (15 ft) MQDC1-530RA 9.14 m (30 ft) CL50 Column Light 4 www.bannerengineering.com - Tel: + 1 888 373 6767 P/N 145315 Rev. O

All measurements are listed in millimeters [inches], unless noted otherwise. SMB30A

• Right-angle bracket with curved slot for versatile orientation
• Clearance for M6 (¼ in) hardware
• Mounting hole for 30 mm sensor
• 12-ga. stainless steel 69 AB C Hole center spacing: A to B=40 Hole size: A=ø 6.3, B= 27.1 x 6.3, C=ø 30.5 SMB30FA
• Swivel bracket with tilt and pan movement for precise adjustment
• Mounting hole for 30 mm sensor
• 12-ga. 304 stainless steel
• Easy sensor mounting to extrude rail T-slot
• Metric and inch size bolt available AB 68.936.3 83.2 Bolt thread: SMB30FA, A= 3/8 - 16 x 2 in; SMB30FAM10, A= M10 - 1.5 x 50 Hole size: B= ø 30.1 SMB30MM
• 12-ga. stainless steel bracket with curved mounting slots for versatile orientation
• Clearance for M6 (¼ in) hardware
• Mounting hole for 30 mm sensor A BC Hole center spacing: A = 51, A to B = 25.4 Hole size: A = 42.6 x 7, B = ø 6.4, C = ø 30.1 SMBAMS30P
• Flat SMBAMS series bracket
• 30 mm hole for mounting sensors
• Articulation slots for 90°+ rotation
• 12-ga. 300 series stainless steel 93 A C B Hole center spacing: A=26.0, A to B=13.0 Hole size: A=26.8 x 7.0, B=ø 6.5, C=ø 31.0 SMBAMS30RA
• Right-angle SMBAMS series bracket
• 30 mm hole for mounting sensors
• Articulation slots for 90°+ rotation
• 12-ga. (2.6 mm) cold-rolled steel 53 A C B Hole center spacing: A=26.0, A to B=13.0 Hole size: A=26.8 x 7.0, B=ø 6.5, C=ø 31.0 SMB30SC
• Swivel bracket with 30 mm mounting hole for sensor
• Black reinforced thermoplastic polyester
• Stainless steel mounting and swivel locking hardware included B A Hole center spacing: A=ø 50.8 Hole size: A=ø 7.0, B=ø 30.0 LMBE12RA35
• Direct mounting of stand-off pipe, with common bracket type
• Zinc-plated steel
• 1/2-14 NPSM nut
• Mounting distance from the wall to the center of the 1/2-14 NPSM nut is 35 mm Hole center spacing: 20.0 38.25 2X Ø9 1/2 - 14 NPSM NUT 5535 LMBE12RA45
• Direct mounting of stand-off pipe, with common bracket type
• Zinc-plated steel
• 1/2-14 NPSM nut
• Mounting distance from the wall to the center of the 1/2-14 NPSM nut is 45 mm Hole center spacing: 35.0 38.25 6545 2X Ø11 1/2 - 14 NPSM NUT LMB Sealed Right-Angle Bracket Model Description Construction LMB30RA Direct-Mount Models: Bracket kit with base, 30 mm adapter, set screw, fasteners, O-rings, and gaskets. Black polycarbonate LMB30RAC Gray polycarbonate LMBE12RA Pipe-Mount Models: Bracket kit with base, ½-14 pipe adapter, set screw, fasteners, O-rings, and gaskets. For use with stand-off pipe (listed and sold separately). Black polycarbonate LMBE12RAC Gray polycarbonate CL50 Column Light P/N 145315 Rev. O www.bannerengineering.com - Tel: + 1 888 373 6767 5

SA-M30TE12 - Black Acetal • Streamlined black acetal or white UHMW stand-off pipe adapter/cover

• Connects between 30 mm light base and ½ in. NPSM/DN15 pipe
• Mounting hardware included SA-M30TE12C - White UHMW Polished 304 Stainless Steel Black Anodized Aluminum Clear Anodized Aluminum
• Elevated-use stand-off pipe (½ in. NPSM/DN15)
• Polished 304 stainless steel, black anodized aluminum, or clear anodized aluminum surface
• ½ in. NPT thread at both ends
• Compatible with most industrial environments SOP-E12-150SS 150 mm (6 in) long SOP-E12-150A 150 mm (6 in) long SOP-E12-150AC 150 mm (6 in) long SOP-E12-300SS 300 mm (12 in) long SOP-E12-300A 300 mm (12 in) long SOP-E12-300AC 300 mm (12 in) long SOP-E12-900SS 900 mm (36 in) long SOP-E12-900A 900 mm (36 in) long SOP-E12-900AC 900 mm (36 in) long SA-E12M30 - Black Acetal • Streamlined black acetal or white UHMW mounting base adapter/cover
• Connects between ½ in. NPSM/DN15 pipe and 30 mm (1-3/16 in) drilled hole
• Mounting hardware included SA-E12M30C - White UHMW Pipe Mounting Flange Pipe Mounting Flange Model Features Construction SA-F12
• Elevated-use stand-off pipes (½ in, NPSM/ DN15)
• M5 mounting hardware and nitrile gasket included Die-cast zinc base with black paint 10 ø28ø70 1/2-14 NPSM 4x ø5.554 SA-F12-3
• Elevated-use stand-off pipes (½ in, NPSM/ DN15)
• M4 mounting hardware and nitrile blend gasket included Black Polycarbonate 298.77 ø60 ø402 x 120°1/2-14 NPSM Banner Engineering Corp. Limited Warranty Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com. For patent information, see www.bannerengineering.com/patents. CL50 Column Light © Banner Engineering Corp. All rights reserved