L42 MA-COM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Features
- VERY WIDE BANDWIDTH
- GOOD SUPPRESSION OF EVEN ORDER HARMONICS
- LOW INSERTION LOSS: 3.5 dB (TYP.)
Description
The L42 signal limiter is a discrete hybrid design, which uses thin film manufacturing processes for accurate performance and high reliability. This design uses Schottky bridge quad and anti-parallel diodes, which provide consistent limiting levels over a broadband frequency range. Both TO-8 and SMTO-8 packages are hermetically sealed, and MIL-STD-883 environmental screening is available. Product Image
Ordering Information
CL42 ** SMA Connectorized Absolute Maximum Ratings Parameter Absolute Maximum Storage Temperature -62ºC to +125ºC Case Temperature +125ºC DC Voltage +25 V Continuous Input Power +20 dBm Short Term Input power (1 minute max.) 400 mW Peak Power (3 µsec max.) 1 W “S” Series Burn-In Temperature (case) +125ºC Electrical Specifications: Z0 = 50Ω, VCC = +15 VDC Parameter Units Typical Guaranteed 25ºC 0º to 50ºC -54º to +85ºC* Frequency (min) MHz 5-4000 50-4000 50-4000 Insertion Loss @ PIN < -20 dBm (max.) 50-3000 MHz 3000-4000 MHz dB dB 3.5 4.0 4.5 5.0 5.0 6.0 Input VSWR (max.) PIN < -10 dBm, +10 < Bias < +20 Vdc 1.6:1 1.9:1 2.1:1 Output VSWR (max.) P IN < -10 dBm, +10 < Bias < +20 Vdc 2.0:1 2.3:1 2.5:1 Output Limiting Level @ PIN = +20 dBm (max.) +15 < Bias < +20 Vdc 50-2000 MHz 2000-4000 MHz dBm dBm 2.5 6.5 4.0 7.0 4.5 7.5 Bias Current (max.) @ +20 Vdc @ +15 Vdc @ +10 Vdc mA mA mA 8.5 7.0 4.0 9.0 10.0 Limiting and Insertion Loss Characteristics at +25°C Bias Voltage Output Level at Limiting Threshold (1 dB comp.) Typical
1000 MHz 2500 MHz 4000 MHz
+20 Volts -1.0 dBm -2.5 dBm -6.0 dBm +15 Volts -2.0 dBm -4.0 dBm -6.2 dBm +5 Volts -12.0 dBm -12.0 dBm -13.8 dBm +10 Volts -5.5 dBm -7.0 dBm -7.8 dBm * Over temperature performance limits for part number CL42, guaranteed from 0oC to +50oC only. ** The connectorized version is not RoHs compliant.
Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Thin Film Limiter Module 50 to 4000 MHz Rev. V2 L42 / SML42 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Typical Performance Curves at +25°C
Visit www.macomtech.com for additional data sheets and product information. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Thin Film Limiter Module 50 to 4000 MHz Rev. V2 L42 / SML42 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is considering for development. Performance is based on target specifications, simulated results, and/or prototype measurements. Commitment to develop is not guaranteed. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is not guaranteed. Outline Drawing: TO-8 * Outline Drawing: Surface Mount * Outline Drawing: SMA Connectorized * ∗ Dimensions are inches (millimeters) ±0.015 (0.38) unless otherwise specified. Typical Performance Curves at +25°C WEIGHT: 1 gram (0.04 oz.) max WEIGHT: 1 gram (0.04 oz.) max WEIGHT: 19 grams (0.67 oz.) max