CL240D10R CRYDOM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

  • Ratings from 5 A and 10 A @ 24-280 VAC
  • Triac Output
  • LED Status Indicator
  • UL Approved, CE Compliant to EN60950-1
  • Improved SEMS screw and washer
  • Redesigned housing with anti-rotation barriers For Generation 3 datasheet click here
  • AC or DC control
  • EMC Compliant to Level 3
  • Epoxy Free Design PRODUCT SELECTION Control Voltage 5 A 3-32 VDC CL240D05 90-250 VAC CL240A05 10 A CL240D10 CL240A10 AVAILABLE OPTIONS Not all part number combinations are available. Contact Crydom Technical Support for information on the availability of a specific part number. Required for valid part number For options only and not required for valid part number Series Load Voltage 240: 24-280 VAC Control Voltage A: 90-250 VAC D: 3-32 VDC Switching Type Blank: Zero Voltage Turn-On R: Instantaneous Turn-On Rated Load Current 05: 5 Amps 10: 10 Amps Cover Blank: Not Included (IP00) C: Included (IP20) Thermal Pad Blank: Not Included H: Included CL A 10 R C240 H Termination Blank: Screws & clamps K: Installed standoffs with screws for PC Board mounting (IP00 only) (1) K OUTPUT SPECIFICATIONS (2) Description 5 A Operating Voltage (47-63Hz) [Vrms] 24-280 Transient Overvoltage [Vpk] (3) 600 Maximum Off-State Leakage Current @ Rated Voltage [mArms] 7 Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] 500 Maximum Load Current [Arms] (4) 5 Minimum Load Current [mArms] 150 Maximum 1 Cycle Surge Current (50/60Hz)[Apk] 84/100 Maximum On-State Voltage Drop @ Rated Current [Vpk] 1.6 Thermal Resistance Junction to Case (Rjc) [°C/W] 2.3 Maximum 1/2 Cycle I² t for Fusing (50/60Hz)[A²sec] 35/42 Minimum Power Factor (with Maximum Load) 0.5 10 A 24-280 600 500 150 1.5 2.3 0.5 Minimum Heat Sink for Rated Current @ 40°C [°C/W] 3 1.5 INPUT SPECIFICATIONS (2) Description AC Control Control Voltage Range 90-250 VAC Maximum Reverse Voltage - Minimum Turn-On Voltage 90 VAC Must Turn-Off Voltage 10 VAC Minimum Input Current (for on-state) 6 mA Maximum Input Current 10 mA Nominal Input Impedance Current Limited Maximum Turn-On Time [msec] 20 Maximum Turn-Off Time [msec] 30 DC Control 3-32 VDC (5) -32 VDC

3 VDC

1 VDC

(6) 1/2 Cycle Do not forget to visit us at: www.crydom.com Copyright © 2016 Crydom Inc. Specifications subject to change without notice. DatasheetPanel Mount

GENERAL SPECIFICATIONS (2) ParametersDescription Dielectric Strength, Input to Output (50/60Hz) Dielectric Strength, Input/Output to Ground (50/60Hz)

4000 Vrms

2500 Vrms

Minimum Insulation Resistance (@ 500 VDC) 109 Ohms Maximum Capacitance, Input/Output 8 pF Ambient Operating Temperature Range (7) -40 to 80 °C Ambient Storage Temperature Range -40 to 125 °C Weight (typical) 2.88 oz (81.53 g) Housing Material UL94 V-0 Baseplate Material Aluminum Input Terminal Screw Torque Range (in-lb/Nm) 13-15 /1.5-1.7 Load Terminal Screw Torque Range (in-lb/Nm) 18-20 / 2-2.2 Input/Load Terminal Screw Torque Range (in-lb/Nm) (1) w/”K” option 8-10 / 0.9-1.13 SSR Mounting Screw Torque Range (in-lb/Nm) 18-20 / 2-2.2 Humidity per IEC60068-2-78 93% non-condensing LED Input Status Indicator Green MTBF (Mean Time Between Failures) at 40°C ambient temperature (8) 11,641,553 hours (1,328 years) MTBF (Mean Time Between Failures) at 60°C ambient temperature (8) 7,210,376 hours (823 years) WIRING DIAGRAM Recommended Wire Sizes Terminals Wire Size (Solid / Stranded) Wire Pull-Out Strength (lbs)[N] Input Output 24 AWG (0.2 mm 2) / 0.2 [minimum] 2 x 12 AWG (3.3 mm 2) / 3.3 [maximum] 20 AWG (0.5 mm 2) / 0.518 [minimum] 2 x 10 AWG (5.3 mm 2) / 5.3 2 x 8 AWG (8.4 mm 2) / 8.4 [maximum] 10 [44.5] 90 [400] 30 [133] 110 [490] 90 [400] S OLI D S T AT E R ELA Y OUTPUT INPUT Load (9) V 4 (– / ) 3 (+ / ) 1 ( ) 2 ( ) AC EQUIVALENT CIRCUIT BLOCK DIAGRAMS +DC -DC AC Trigger Circuit Current Limiter AC INPUT OUTPUT CL Series DC Control AC AC AC Trigger Circuit Current Limiter AC INPUT OUTPUT AC/DC Converter CL Series AC Control 0 5 10 15 20 25 30 35 Input Current vs Input Voltage Standard Regulated “DC” Inputs Input Current (mA) DC Input Voltage Input Current vs Input Voltage Standar Regulated “AC” Inputs Input Current (mA) AC Input Voltage 0 50 100 150 200 250 Do not forget to visit us at: www.crydom.com Copyright © 2016 Crydom Inc. Specifications subject to change without notice. DatasheetPanel Mount Input/Output Terminal Screw Thread Size #6-32 UNC / #8-32 UNC

MECHANICAL SPECIFICATIONS (2) GENERAL NOTES (1) Tolerances: ±0.02 in / 0.5 mm All dimensions are in: inches [millimeters] Screw Termination

1 OUTPUT 2

4 INPUT 3

1.1 [27.9] 0.49 [12.4] Mounting Hole/Slot 0.19 [4.9] DIA. 0.89 [22.6] 1.88 [47.6] 1.7 [43.2] 2.25 [57.3] 1.0 [25.4] 1.75 [44.5] 1.0 [25.4] 1.75 [44.5] Hex Standoff Termination (“K” Option) 1.1 [27.9] 0.49 [12.4] Mounting Hole/Slot 0.19 [4.9] DIA. 1.88 [47.6] 1.7 [43.2] 2.25 [57.3] 1.0 [25.4] 1.75 [44.5] 1.04 [26.4] (4 places) 0.93 [23.6] 1.0 [25.4] (2 places) (2 places) Mounting Hole/Slot 0.19 [4.9] DIA. 2.25 [57.3] 1.1 [27.9] 0.49 [12.4] 1.88 [47.6] 1.7 [43.2] 2.32 [58.8] 1.0 [25.4] 1.75 [44.5] 1.0 [25.4] 1.75 [44.5] 1.22 [30.9] Screw Termination, IP20 (2) All parameters at 25°C unless otherwise specified. (3) Output will self trigger between 450-600Vpk, not suituable for capacitive loads. (4) Heat sinking required, see derating curves. (5) Increase minimum voltage by 1V for operations from -20 to -40°C. (6) Turn-on time for instantaneous turn-on versions is 0.1 msec. (7) AC models operating range is -20 to 80 °C. (8) All parameters at 50% power rating and 100% duty cycle (contact Crydom tech support for detailed report). (9) Load can be wired to either SSR output terminal 1 or 2. (10) For single surge pulse Tc=25° C; Tj=125°C. For AC Output SSRs, AC Rms value of surge current equals the peak value divided by √2 (1.414). For additional information or specific questions, contact Crydom Technical Support. Do not forget to visit us at: www.crydom.com Copyright © 2016 Crydom Inc. Specifications subject to change without notice. DatasheetPanel Mount

THERMAL DERATE INFORMATION (i) SSR metal base plate acting as heat sink, it must be exposed to free ambient air. 100 120 0.01 0.1 1 10 Surge Current (Amp) AC Peak Surge Duration (sec) CL240x10 0.01 0.1 1 10 Surge Current (Amp) AC Peak Surge Duration (sec) CL240x05 Single Pulse (10) 20 30 40 50 60 70 80 CL240x05 Load Current (Amps) Ambient Temperature (ºC) 2°C/W 3°C/W No Heat Sink (i) 20 30 40 50 60 70 80 CL240x10 Load Current (Amps) Ambient Temperature (ºC) 1.5°C/W 2°C/W No Heat Sink (i) Do not forget to visit us at: www.crydom.com Copyright © 2016 Crydom Inc. Specifications subject to change without notice. DatasheetPanel Mount

IEC 61000-4-2 Electrostatic Discharge Level 3 IEC 61000-4-4 Electrically Fast Transients Level 3 E46203 Part number: KS101 Clear plastic cover compatible with all new S1 designs. Safety covers provide added protection from electric shock when installing or checking equipment. Protective Cover Hardware Kit Part number: HK4 Bag with 2 square brass accessories and 2 screw 8-32 x 5/8 for output. Used to mount TMR1 lug terminals. New Accessories! Protective Cover & Hardware Kits Recommended Accessories Cover Hardware Kit Heat Sink Part No. Thermal Resistance [ºC/W] Lug Terminal Thermal Pad KS101 HK1 HK4 HS501DR HS301 / HS301DR HS251 HS201 / HS201DR HS202 / HS202DR HS172 HS151 / HS151DR HS122 / HS122DR HS103 / HS103DR HS101 HS073 HS072 HS053 HS033 HS023 5.0 3.0 2.5 2.0 2.0 1.7 1.5 1.2 1.0 1.0 0.7 0.7 0.5 0.36 0.25 TRM1 TRM6 HSP-1 HSP-2 ACCESORIES Rev. 031516 Do not forget to visit us at: www.crydom.com Copyright © 2016 Crydom Inc. Specifications subject to change without notice. DatasheetPanel Mount

Do not forget to visit us at: www.crydom.com Copyright © 2016 Crydom Inc. Specifications subject to change without notice. DatasheetPanel Mount DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO / 危险 HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH.

  • Disconnect all power before installing or working with this equipment.
  • Verify all connections and replace all covers before turning on power. Failure to follow these instructions will result in death or serious injury. RIESGO DE DESCARGA ELECTRICA O EXPLOSION.
  • Desconectar todos los suministros de energia a este equipo antes de trabajar con este equipo.
  • Verificar todas las conexiones y colocar todas las tapas antes de energizer el equipo. El incumplimiento de estas instrucciones puede provocar la muerte o lesiones serias. RISQUE DE DESCHARGE ELECTRIQUE OU EXPLOSION
  • Eteindre toutes les sources d'énergie de cet appareil avant de travailler dessus de cet appareil
  • Vérifier tous connections, et remettre tous couverts en olace avant de mettre sous De non-suivi de ces instructions provoquera la mort ou des lésions sérieuses sérieuses. GEFAHR EINES ELEKTRISCHE N SCHLAGES ODER EINER EXPLOSION.
  • Stellen Sie jeglichen Strom ab, der dieses Gerät versorgt, bevor Sie an dem Gerät Arbeiten durchführen
  • Vor dem Drehen auf Energie alle Anschlüsse überprüfen und alle Abdeckungen ersetzen. Unterlassung dieser Anweisungen können zum Tode oder zu schweren Verletzungen führen. RISCHIO DI SCOSSA ELETTRICA O DELL’ESPLOSIONE.
  • Spenga tutta l'alimentazione che fornisce questa apparecchiatura prima di lavorare a questa apparecchiatura
  • Verificare tutti i collegamenti e sostituire tutte le coperture prima dell’accensione L'omissione di queste istruzioni provocherà la morte o lesioni serie 存在电击、 爆炸或电弧 闪烁危险
  • 在操作此设 备之前请先 关闭电源。 若不遵守这些说明， 可能会导致严重的 人身伤害甚至死亡。 WARNING / AVERTISSEMENT / WARNUNG /ADVERTENCIA / AVVERTENZA / 警告 RISK OF MATERIAL DAMAGE AND HOT ENCLOSURE
  • The product's side panels may be hot, allow the product to cool before touching.
  • Follow proper mounting instructions including torque values.
  • Do not allow liquids or foreign objects to enter this product. Failure to follow these instructions can result in serious injury, or equipment damage. RISQUE DE DOMMAGE MATERIEL ET DE SURCHAUFFE DU BOITIER
  • Les panneaux latéraux du produit peuvent être chauds. Laisser le produit refroidir avant de le toucher.
  • Respecter les consignes de montage, et notamment les couples de serrage.
  • Ne pas laisser pénétrer de liquide ni de corps étrangers à l'intérieur du produit. Le non-respect de cette directive peut entraîner, des lésions corporelles graves ou des dommages matériels. Die Nichtbeachtung dieser Anweisung kann Körperverletzung oder Materialschäden zur Folge haben. GEFAHR VON MATERIALSCHÄDEN UND GEHÄUSEERHITZUNG
  • Die Seitenwände können heiß sein. Lassen Sie das Produkt abkühlen, bevor Sie es berühren.
  • Beachten Sie die Montageanweisungen,
  • Führen Sie keine Flüssigkeiten oder Fremdkörper in das Produkt ein. Si no se respetan estas precauciones pueden producirse graves lesiones, daños materiales. RIESGO DE DAÑOS MATERIALES Y DE SOBRECALENTAMIENTO DE LA UNIDAD
  • Los paneles laterales del producto pueden estar calientes. Esperar que el producto se enfríe antes de tocarlo.
  • Respetar las instrucciones de montaje, y en particular los pares de apretado.
  • No dejar que penetren líquidos o cuerpos extraños en el producto. La mancata osservanza di questa precauzione può causare gravi rischi per l'incolumità personale o danni alle apparecchiature. RISCHIO DI DANNI MATERIALI E D'INVOLUCRO CALDO
  • I pannelli laterali dell'apparecchio possono scottare; lasciar quindi raffreddare il prodotto prima di toccarlo.
  • Seguire le istruzioni di montaggio corrette.
  • Non far entrare liquidi o oggetti estranei in questo apparecchio. 如不能正确执行这些操作说明， 极有可能造成严重人体伤害或者设备的损坏。 材料损坏和高温外壳的危险性
  • 产品的一侧面板可能很热，在其冷却前请 不要触碰。
  • 遵照正确的安装说明，包括扭矩值。
  • 请勿让液体及其他异物进入本产品。

ANNEX - ENVIROMENTAL INFORMATION The environmental information disclosed in this annex including the EIP Pollution logo are in compliance with People’s Republic of China Electronic Industry Standard SJ/T11364 – 2006, Marking for Control of Pollution Caused by Electronic Information Products. Part Name Toxic or hazardous Substance and Elements Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated (Pb) (Hg) (Cd) Chromium (Cr (VI)) biphenyls (PBB) diphenyl ethers (PBDE) Semiconductor die Solder 附件 - 环保信息 此附件所标示的包括电子信息产品污染图标的环保信息符合中华人民共和国电子行业标准 SJ/T11364 - 2006, 电子信息产品污染控制标识要求。 有毒有害物质或元素件部 名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr (VI)) (PBB) (PBDE) 半导体芯片 焊接点 Do not forget to visit us at: www.crydom.com Copyright © 2016 Crydom Inc. Specifications subject to change without notice. DatasheetPanel Mount