QR-P18 HIROSE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 12
Technical content
Rectangular, Multiple-Position Rack/Panel Insulation Displacement Connectors (IDC) QR/P18 Series I Overview The QR/P18 Series of miniature rack/panel connectors is designed for the complete segmentation of the structure of the external holder/terminal units of the well-received QR/P Series of plug-in rectangular rack/panel connectors; furthermore, the subsequent insertion of the harnessed terminal unit affords a more efficient harness mounting task. These connectors are configured with 12, 18, or 24 (insulation displacement connection) positions in the signal portion, and 4 (crimp) positions in the power supply portion. I Features 1. Completely segmented structure of the external holder/terminal unit In order to improve the harness mounting task, the connectors are designed for the complete segmentation of the external holder and the signal/power supply unit, and the method of subsequently inserting harnessed products aims to improve the workability of the power supply/signal section harness as well as the mounting of the set. 2. Signal unit The signal unit uses the highly reliable insulation displacement connection method. (The wire is AWG #26 and the insulation outside diameter is 0.88 mm.) The insulation displacement task can now be used by fitting a special applicator to a commercially available automatic insulation displacement machine, or a manual press can also be selected. 3. Power supply portion The power supply terminals permit the use of a crimp harness using wire of AWG #16 to 18 (and insulation outside diameter of 2.1 to 2.2 mm), and can accommodate a maximum of 12 A. 4. Sequenced structure Connectors possess two sequenced contacts in the signal male unit and one sequenced contact in the power supply female unit making them perfect in terms of safety too. 5. Panel installation Installation to a panel uses a single-action method on the anchored side and a floating screw structure on the floating side which permits smooth insertion and disconnection without forcing. 6. RoHS compliant All components and materials comply with the requirements of the EU Directive 2002/95/EC. A portion of this series is suitably constructed for high-speed differential transfer, and using a suitable cable, transfer of 2.5Gbps per pair is possible. 2007.4 External holder Power supply contact male unit Power supply contact female unit Power supply male contacts Power supply female contacts Signal contact male unit Signal contact female unit Panel 2.5Gbps AWG28 2m Scale X : 100psec/div Y : 100V/div
2.5 Gbps Eye Pattern Waveform
PPC, transmitting and receiving devices, data communications equipment, vending machines, measuring instruments, factory automation equipment, and other high- speed transfer applications, etc. The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
125 V AC (Signal contacts)
300V AC (Power contacts) 1A (Signal contacts) 12A (Power contacts) Operating temperature range -40ç to +105ç (Note 1) Products External holder Signal contact unit Power contact unit Power supply contacts Insulator Insulator Female contacts Male contacts Insulator Female contacts Male contacts Female contacts Male contacts PBT PA Phosphor bronze Phosphor bronze PBT Phosphor bronze Phosphor bronze Copper alloy Copper alloy Gold plated Gold plated Gold plated Gold plated Gold plated + Tin copper plated Gold plated + Tin copper plated UL94V-0 UL94V-0 UL94V-0 RemarksFinishComponents Material 100 mA
500 V DC
500 V AC / one minute
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 axis. Acceleration of 490 m/s2, 11 ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis Temperature: -55ç¡ +5ç to +35ç¡ +105ç¡ +5ç to +35ç Time: 30¡ 5¡ 30¡ 5 (Minutes) 5 cycles 96 hours at 40ç and RH 90% to 95% 5% salt water solution for 48 hours Item 3. Withstanding Voltage 4. Durability (mating / un-mating) 5. Vibration 6. Shock 7. Temperature cycle 8. Humidity (Steady state) 9. Salt mist Specification 50mø max. (Signal contacts) (Note 2) 10mø max. (Power contacts) (Note 2) 1000Mø min. (Signal contacts) 5000Mø min. (Power contacts) No flashover or insulation breakdown. Contact resistance: 70mø max. (Signal contacts) 20mø max. (Power contacts) 3000 cycles Contact resistance: 70mø max. (Signal contacts) 20mø max. (Power contacts) No damage, cracks, or parts dislocation. Insulation resistance: 100Mø min. (Signal contacts, state) 3000Mø min. (Power contacts, state) No damage, cracks, or parts dislocation. No corrosions. No electrical discontinuity of 10µs or more. No damage, cracks, or parts dislocation. Conditions 1. Contact resistance 2. Insulation resistance Note1: Includes temperature rise caused by current flow. Note2: Excludes wire conductor resistance. I Function Diagram G Power supply/signal combination type G Signal type QR/P18-Pπ4S QR/P18-Sπ4S-π QR/P18-4P-C QR/P18-4S-CQR/P17-PCA-π11(50) QR/P17-SCA-π11(50) QR/P18-πPπQR/P18-πSπ QR/P18-PπQR/P18-Sπ QR/P18-πSπ QR/P18-πPπ The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
G External holder. G Signal contact termination block G Power contact insert G Power contact Series name Signal contact type S: Female contact P: Male contact Power contact type S: Female contact P: Male contact Applicable panel thickness A: 2mm B: 1.5mm Number of signal contact of external holder A: 12 pos. (Contact pitch 1.5mm) B: 18 pos. (Contact pitch 1.5mm) C: 24 pos. (Contact pitch 1.5mm) Number of power contact1 4 QR / P18 - S A 4 P - A 1 2 63 54 Series name Signal contact type S: Female contact P: Male contact Number of signal contact of signal contact termination block A: 12 pos. (Contact pitch 1.5mm) B: 18 pos. (Contact pitch 1.5mm) C: 24 pos. (Contact pitch 1.5mm) Number of signal contact 1 4 QR / P18 - 12 S A 1 2 3 4 Series name Power contact type S: Female contact P: Male contact Connector type C: Crimp housing Number of power contact 1 4 QR / P18 - 4 P - C 1 2 3 4 Series name Power contact type PC: Male crimp contact SC: Female crimp contact Applicable wire 1: AWG#16 to 18 Contact plating 1: Gold platedApplicable wire style A: UL1015 Packaging 1: Pack packaging 2: Reel packaging 1 4 QR / P17 - PC A - 1 1 1 1 2 63 54 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
6-R0.5 -0.2A 18.8 B 20.7 +0.1 19.8+0.1 14.75±0.05D+0.1 C±0.1 2-R0.3 +0.2 10.5±0.1 13.9+0.1 2-M3∞0.5 10.5 (2) 3 23 32.65 26.5 Die roll side should be connector mating side. 6.15 26.5 2.5 5.1 29 7.4 QR/P18-Sπ4P-A QR/P18-Pπ4S QR/P15-SCREW PanelPanel G Female power contact, male signal contact type Panel cutout Mated condition (Shown for reference) Note: Establish panel mounting so that the mating gap dimensions of the power supply side and the signal side are 1.5 mm or less. Applicable panel thickness: 2.0mm Part number QR/P18-PA4S QR/P18-PB4S QR/P18-PC4S CL No. CL221-0293-8 CL221-0313-3 CL221-0297-9 Number of contacts Power Signal A 54.65 58.65 63.15 B 46.25 50.25 54.75 C 46.25 50.25 54.75 D RoHS 27.2 31.2 35.7 YES Panel attachment screw (QR/P15-SCREW CL221-0251-8) is optional. The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
6-R0.5 -0.2A 18.8 B 20.7 +0.1 19.8+0.1 14.75±0.05D+0.1 C±0.1 2-R0.3 +0.2 10.5±0.1 13.9+0.1 2-M3∞0.5 10.5 (2) 3 23 32.65 26.5 Die roll side should be connector mating side. G Male power contact, female signal contact type Panel cutout Applicable panel thickness: 2.0mm Part number QR/P18-SA4P-A QR/P18-SB4P-A QR/P18-SC4P-A CL No. CL221-0294-0 CL221-0315-9 CL221-0298-1 Number of contacts Power Signal A 43.85 47.85 52.35 B 37.9 41.9 46.4 C 27.25 31.25 35.75 D RoHS 17.3 21.3 25.8 YES The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
I External holder (Signal type) A B 4.7 4.7±0.1 (15) t=1.5 Die roll side should be connector mating side. 14.8+0.2 5-R0.5m ax. 2.2 0-0.2 D+0.2 E±0.1 C+0.2 0R0.3min. 2-M3∞0.5 17.5 1.5 7.4 2.515 1.5 5.1 QR/P15-SCREW QR/P18-Pπ QR/P18-Sπ-B Panel G Male signal contact type Panel cutout Mated condition (Shown for reference) Note: Establish panel mounting so that the mating gap dimensions of the power supply side and the signal side are 1.5 mm or less. Applicable panel thickness: 1.5mm Part number QR/P18-PB QR/P18-PC CL No. CL221-0309-6 CL221-0311-8 Number of contacts Signal BA 29.5 34.0 37.7 42.2 C 27.0 31.5 D 23.5 28.0 E RoHS 29.5
34.0 YES
Panel attachment screw (QR/P15-SCREW CL221-0251-8) is optional. The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
A B 4.7 4.7±0.1 (15) t=1.5 Die roll side should be connector mating side. 14.8+0.2 5-R0.5m ax. 2.2 0-0.2 D+0.2 E±0.1 C+0.2 0R0.3min. 2-M3∞0.5 G Female signal contact type Panel cutout Applicable panel thickness: 1.5mm Part number QR/P18-SB-B QR/P18-SC-B CL No. CL221-0310-5 CL221-0312-0 Number of contacts Signal A 28.05 32.55 B 25.1 29.6 C 13.00 15.25 D RoHS 07.3
11.8 YES
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
A B Sequence contact Sequence contact G Male, contact pitch 1.5mm CL No. CL221-0291-2 CL221-0285-0 CL221-0295-3 Part number QR/P18-12PA QR/P18-18PB QR/P18-24PC Number of contacts 13.5 17.5 22.0 B RoHSA 14.0 18.0 22.5 YES Adscable cable: AWG#26, insulator diameter 0.88mm CL No. CL221-0292-5 CL221-0286-2 CL221-0296-6 Part number QR/P18-12SA QR/P18-18SB QR/P18-24SC Number of contacts 13.5 17.5 22.0 B RoHSA 14.0 18.0 22.5 YES Applicable cable: AWG#26, insulator diameter 0.88mm A B G Female, contact pitch 1.5mm I Signal contact termination block The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
31.1 17.9 15.9 Part number QR/P18-4P-C CL No. RoHS CL221-0316-1 YES Sequence contact(No.4) 27.7 16.2 13.5 Part number QR/P18-4S-C CL No. RoHS CL221-0314-6 YES The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
28.5Applicable wire size 16-18 Applicable cable AWG16~18 UL1015 AWG16~18 UL1015 CL No. CL221-0265-2-50 CL221-0263-7-50 Bag Reel Part number QR/P17-PCA-111(50) QR/P17-PCA-211(50) Q'ty RoHS Packaging 100
3000 YES
Applicable cable: AWG#16 to 18, insulator diameter 2.1mm to 3.2mm Applicable wire size 18.3 16-18 G Female contact Applicable cable AWG16~18 UL1015 AWG16~18 UL1015 CL No. CL221-0264-0-50 CL221-0262-4-50 Bag Reel Q'ty RoHS Packaging 100 Applicable cable: AWG#16 to 18, insulator diameter 2.1mm to 3.2mm Part number QR/P17-SCA-111(50) QR/P17-SCA-211(50) G Male contact I Power contact The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
G Power contact crimp tool G Signal contact termination block IDC tool BTools Type Hand press for 12 pos. Hand press for 18 pos. Hand press for 24 pos. Automatic IDC applicator for male signal contact Automatic IDC applicator for female signal contact Automatic IDC machine (Murata kogyo co., Ltd., P/N MS-01) is available. Part number QR/P18-12/IDCR-MP QR/P18-18/IDCR-MP QR/P18-24/IDCR-MP 2957-1000 2957-1500 Applicable connector QR/P18-12PA QR/P18-12SA QR/P18-18PB QR/P18-18SB QR/P18-24PC QR/P18-24SC QR/P18-12PA QR/P18-18PB QR/P18-24PC QR/P18-12SA QR/P18-18SB QR/P18-24SC Type Hand tool Applicable for automatic crimp machine Automatic crimp machine Extraction tool Part number HT104/QR/P17-1 AP105-QR/P17-1 AP105-QR/P17-1 CM-105 QR/P17-TC Applicable contact QR/P17-PCA-111(50) QR/P17-SCA-111(50) QR/P17-PCA-211(50) QR/P17-SCA-211(50) QR/P17-PCA-211(50) QR/P17-SCA-211(50) QR/P17-PCA-111(50) QR/P17-SCA-111(50) QR/P17-PCA-211(50) QR/P17-SCA-211(50) The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of improvements. 5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933 http://www.hirose.com http://www.hirose-connectors.com 2.55±0.1 2.08±0.1 Insulation displacement height AA Cable 0 ~0.5 Cable end position A-A Signal contact unit (male) Signal contact unit (female) BB Cable 0 ~0.5 Cable end position B-B 2.55±0.1 2.08±0.1 Insulation displacement height Insulation heightInsulation height G Power supply contacts Cable Spring 1.6 mm or greater Male contact Cable Female contact Spring 3.6 mm or greater (1) After wiring the cable, examine the cable end position, the insulation displacement height, and the insulation height. (2) In examining the insulation displacement height and the insulation height, use a measurement pin having a tip of 0.5 mm diameter. (3) For information about the detailed inspection method, please request the "Inspection Standards Manual" from Hirose Electric. (4) The inspection method of the diagrams is for cable with AWG #26 wire and an insulation outside diameter of 0.88 mm. Before inserting the power supply contacts into the power supply terminal unit, check that the spring portion illustrated in th e diagram is not misshapen. When the spring portion is less than the dimensions indicated in the diagram, the spring could pull out from the power supply terminal unit; therefore, the specified dimensions should be maintained. G Signal contact unit I Inspection After Cable Wiring The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.