CL2-C-C DIALIGHT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
p Ultra slim design, less than 1/2” (13mm) high p 70% lumen maintenance @ 50,000+ hr life @ 25ºC ambient temperature p Low energy use, no IR or UV emissions p Modular “quick connect” system for easy installation p Designed for even LED spacing over linear runs, no hotspots or dark spots between fixtures p Cool to touch, suitable for direct mounting on flammable surfaces p Onboard constant current driver with low voltage input p ETL listed to UL standards for dry locations p Utilizes the latest high efficiency LED technology CL2 SERIES MDEXLUMCL2_A
APPLICATIONS
The CL2 Series is designed for use in a wide range of lighting applications, especially areas which benefit from its ultra sli m profile, low energy and long operating life. Designed around the latest LED technology, the CL2 series represents true innovation in lighting, delivered in a package which blends seamlessly into it’s surroundings. Sample applications include, bu t not limited to: Cove and cornice lighting, shelf lighting, integrated into furniture, under counters, stair hand rails, display ca ses, task lighting. OPERATING CONDITIONS MATERIALS/FINISH p Ambient temperature -20ºC to +40ºC (-4ºF to +104ºF) p Anodized aluminum module base with polycarbonate lens p Plug & play connector system p Onboard constant current driver p 4 high output 1W LEDs per module p 20AWG, PTFE cable - UL rated E213967, 300V, 80ºC p Input voltage 24VDC. Use only class 2 power supplies p Power consumption 5.3W per module Does not include power supply losses p Max # of modules connected per run = 20. Up to 16 modules can be operated on a 100W power supply
ORDERING INFORMATION
Connectors (sold separately) CL2-E2E = End to end module connector CL2-START = 3m / 9’ 10” start cable (supplies power to first module) CL2-FLEX = 63mm / 2.5” flexible end to end connector CL2-END = End plug CL2-EXTEND = 952mm / 37.5” flexible end to end connector Dialight Corporation
1501 Route 34 South • Farmingdale, NJ 07727 USA
Tel: (1) 732-919-3119 • Fax: (1) 732-751-5778 • www.dialight.com PRIVATE LABEL OEM PROGRAM Dialight Lumidrives York House • Weatherby Road • Long Marston, York, YO26 7NH Tel: 0845 6346161 • Fax: 0845 6346160 • www.dialight.com LED Color Catalog Number (A) Typical CCT Min Luminous Flux per Module (lumens) Typical Luminous Flux per Module (lumens) CRI Lens (B) Cool White C 5000K 288 342 75 C = ClearNeutral White N 4100K 242 288 75 Warm White W 3000K 204 242 75 F = Frosted High CRI Warm White Z 3000K 171 204 92 Note: Special colors available, consult factory. LED data is LED manufacturers test data at 25 ºC Tj. Light output at max acceptable ambient temp will be approximately 15-20% lower depending on the thermal conductivity of the mounting surface. Clear lens will reduce fixture light output by additonal 8-10%, and frosted lens by additional 30%. Frosted Lens Version
IES 32 files available - consult factory MECHANICAL DIMENSIONS Dialight Corporation Tel: (1) 732-919-3119 • Fax: (1) 732-751-5778 • www.dialight.com PRIVATE LABEL OEM PROGRAM Dialight Lumidrives York House • Weatherby Road • Long Marston, York, YO26 7NH Tel: 0845 6346161 • Fax: 0845 6346160 • www.dialight.com Requires Class 2 low voltage power supply (purchased separately) Total power consumption of modules should not exceed rating of power supply Observe minimum rating of power supply used Dimensions in inches (mm) Dialight reserves the right to make changes at any time in order to supply the best product possible. MDEXLUMCL2_A CL2 Module with Clear Lens (Normalized Data)