CL0608 EATON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Multi-phase power inductors Product features

  • High current multi-phase inductor
  • 100 nH per phase coupled inductor
  • 10.8 mm x 6.35 mm footprint surface mount package in an 8.2 mm height
  • Ferrite core material
  • Moisture Sensitivity Level (MSL): 1

Applications

  • For exclusive use with Maxim® Multi-phase controllers
  • Voltage Regulator Modules (VRMs) and high power density VRMs
  • Server and desktop
  • Central processing unit (CPU)
  • Graphics processing unit (GPU)
  • Application specific integrated circuit (ASIC)
  • Data networking and storage systems
  • High current Point-of-Load (POL) modules
  • Vcore regulators Environmental data
  • Storage temperature range (Component): -40 °C to +125 °C
  • Operating temperature range: -40 °C to +125 °C (ambient plus self-temperature rise)
  • Solder reflow temperature: J-STD-020 (latest revision) compliant
  • Halogen free, lead free, RoHS compliant Maxim® is a registered trademark of Maxim Integrated Devices, Inc. Pb HALOGEN HFFREE

Multi-phase power inductors www.eaton.com/electronics Product specifications Part Number5 Inductor Phases OCL1 (nH) ±20% FLL2 (nH) minimum Isat12 (A) DCR (mΩ) ±10% @ 20 °C SCL3 (nH) ±20% Isat24 (A) CL0608- 2- 100TR-R 2 380 300 15 0.89 100 38 1. Open Circuit Inductance (OCL) Test Parameters: 1.0 MHz, 0.1 Vrms, 0.0 Adc, +25 °C 2. Full Load Inductance (FLL) Test Parameters: 1.0 MHz, 0.1 Vrms, Isat1, +25 °C 3. Short Circuit Inductance (SCL) Test Parameters: 1.0 MHz, 0.1 Vrms, 0.0 Adc, +25 °C CL0608-2-100TR-R short (1 & 4), measure (2 & 3), and divide by 2. 4. I sat2: Peak current where SCL drops approximately 20% @ +25 °C 8. Part Number Definition: CL0608-x-100TR-R CL0608 = Product code and size x = Number of phases 100 = Inductance value per phase in nH TR = Tape and reel packaging -R suffix = RoHS compliant Note: This device is licensed for use only when incorporated within a voltage regulator employing power regulating devices manufactured by Maxim Integrated Devices, Inc. No license is granted expressly or by implication to use this device with power regulating devices manufactured by any company other than Maxim. Dimensions (mm) Part marking: CL0608-x-100TR-R (x = number of phases), xxxx = lot code Tolerances are ±0.25 millimeters unless stated otherwise All soldering surfaces to be coplanar within 0.13 millimeters PCB tolerances are ±0.1 millimeters unless stated otherwise DCR measured from point “a” to point “b” Do not route traces or vias underneath the inductor Packaging information (mm) Supplied in tape and reel packaging , 500 parts per 13” diameter reel Drawing not to scale

Multi-phase power inductors www.eaton.com/electronics Inductance characteristics – SCL vs. current Inductance characteristics – OCL vs. current 100 120 05 10 15 20 25 30 35 40 45 50 SCL (nH) Idc (A) CL0608-2-100TR-R +25 °C +105 °C +125 °C 100 150 200 250 300 350 400 450 0 24681 01 21 41 61 82 02 22 4 OCL (nH) Idc (A) CL0608-2-100TR-R +25 °C +105 °C +125 °C

1000 Eaton Boulevard

Cleveland, OH 44122 United States www.eaton.com/electronics © 2016 Eaton All Rights Reserved Printed in USA Publication No. 10578 BU-MC16092 December 2016 Eaton is a registered trademark. All other trademarks are property of their respective owners. Technical Data 10578 Effective December 2016 CL0608 Multi-phase power inductors Life Support Policy: Eaton does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. Eaton reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Eaton also reserves the right to change or update, without notice, any technical information contained in this bulletin. Solder reflow profile Reference JDEC J-STD-020 Profile Feature Standard SnPb Solder Lead (Pb) Free Solder Preheat and Soak • Temperature min. (Tsmin) 100 °C 150 °C

  • Temperature max. (Tsmax) 150 °C 200 °C
  • Time (Tsmin to Tsmax) (ts) 60-120 Seconds 60-120 Seconds Average ramp up rate Tsmax to Tp 3 °C/ Second Max. 3 °C/ Second Max. Liquidous temperature (Tl) Time at liquidous (tL) 183°C 60-150 Seconds 217°C 60-150 Seconds Peak package body temperature (TP)* Table 1 Table 2 Time (tp) within 5 °C of the specified classification temperature (T c) 20 Seconds 30 Seconds** Average ramp-down rate (Tp to Tsmax) 6 °C/ Second Max. 6 °C/ Second Max. Time 25 °C to Peak Temperature 6 Minutes Max. 8 Minutes Max. * Tolerance for peak profile temperature (Tp) is defined as a supplier minimum and a user maximum. ** Tolerance for time at peak profile temperature (tp) is defined as a supplier minimum and a user maximum. Temperature t tP ts TC -5°C Time 25°C to Peak Time 25°C Tsmin Tsmax TL TP Preheat A Max. Ramp Up Rate = 3°C/s Max. Ramp Down Rate = 6°C/s Table 1 - Standard SnPb Solder (Tc) Package Thickness Volume mm3 <350 Volume mm3 ≥350 <2.5mm) 235 °C 220 °C ≥2.5mm 220 °C 220 °C Table 2 - Lead (Pb) Free Solder (Tc) Package Thickness Volume mm3 <350 Volume mm3 350 - 2000 Volume mm3 >2000 <1.6mm 260 °C 260 °C 260 °C 1.6 – 2.5mm 260 °C 250 °C 245 °C >2.5mm 250 °C 245 °C 245 °C