CJ001003DK

CR101003FM AAC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

American Accurate Components, Inc. Thick Film Chip Resistors

188 Technology Drive Unit H, Irvine, CA 92618

TEL: 949045309888 /rhombus4 FAX: 949045308889 /rhombus4 Email: sales@aacix.com SCHEMATIC Wrap Around Terminal CR, CJ, type DIMENSIONS (mm) Size Size Code L W c d t ELECTRICAL SPECIFICATIONS for CHIP RESISTORS Size 01005 0201 0402 0603 0805 Power Rating (EIA 575) 1/32W 1/20W 1/16W 1/10W 1/8W Max. Working Voltage* 15V 25V 50V 50V 150V Max. Overload Voltage 30V 50V 100V 100V 300V Operating Temp. 70°C 70°C 70°C 70°C 70°C Size 1206 1210 2010 2512 Power Rating (EIA 575) 1/4W 1/3W 1/2W 1W Max. Working Voltage* 200V 200V 200V 200V Max. Overload Voltage 400V 400V 400V 400V Operating Temp. 70°C 70°C 70°C 70°C HOW TO ORDER CR 10 8 1003 F M Packaging M = 7” Reel O = Cutting Tape B = Bulk K = Sample Kit Tolerance (%) EIA Resistance Value Standard Decade Values Size 20 = 0201 10 = 0805 01P = 25120P 05 = 0402 18 = 1206 00 = 01005 16 = 0603 14 = 1210 12 = 2010 01 = 2512 Series CJ = Jumper CR = Resistor Wrap Around Termination Material: Sn Ceramic Substrate Resistive Element Overcoat Conductor

FEATURES

/square6 Excellent stability over a wide range of environmental conditions /square6 Small size to 01005 /square6 RoHs Compliance

American Accurate Components, Inc. Thick Film Chip Resistors TEL: 949045309888 /rhombus4 FAX: 949045308889 /rhombus4 Email: sales@aacix.com Size TCR (ppm/ °° °°C) Tolerance (%) and Resistance D(±0.1%) E096 & E024 G(±0.5%) E096 & E024 F(±1%) E096 & E024 J(±5%) E024 01005 ± 300 10Ω≤R<100Ω 10Ω≤R<100Ω ± 200 100Ω≤R<1MΩ 100Ω≤R<1MΩ 0201 ±200 100Ω010KΩ 10Ω02MΩ 10Ω010MΩ +600 0200 1Ω09.1Ω 1Ω09.1Ω 0402 ±100 100Ω0499KΩ 100Ω01MΩ 100Ω01MΩ ±200 10Ω0100Ω 10Ω0100Ω 10Ω≤R<100Ω 1MΩ<R≤10MΩ 10Ω010MΩ +500 0200 1Ω09.1Ω 1Ω09.1Ω ±400 10MΩ≤R≤20MΩ 0603 ±100 10Ω0560kΩ 10Ω01MΩ 10Ω01MΩ ±200 1M<R≤10MΩ 10Ω010MΩ ±400 1Ω09.1Ω 1Ω09.1Ω 10MΩ<R≤20MΩ 0805 ±100 10Ω0560kΩ 10Ω01MΩ 10Ω01MΩ ±200 1M<R≤10MΩ 10Ω010MΩ ±400 1Ω09.1Ω 1Ω09.1Ω 10MΩ<R≤20MΩ 1206 ±100 10Ω0560kΩ 10Ω01MΩ 10Ω01MΩ ±200 1M<R≤10MΩ 10Ω010MΩ ±400 1Ω09.1Ω 1Ω09.1Ω 10MΩ<R≤20MΩ 1210 ±100 10Ω0560kΩ 10Ω01MΩ 10Ω01MΩ ±200 1M<R≤10MΩ 10Ω010MΩ ±400 1Ω09.1Ω 1Ω09.1Ω 10MΩ<R≤20MΩ 2010 ±100 10Ω0560kΩ 10Ω01MΩ 10Ω01MΩ ±200 1M<R≤10MΩ 10Ω010MΩ ±400 1Ω09.1Ω 1Ω09.1Ω 10MΩ<R≤20MΩ 2512 ±100 10Ω0560kΩ 10Ω01MΩ 10Ω01MΩ ±200 1M<R≤10MΩ 10Ω010MΩ ±400 1Ω09.1Ω 1Ω09.1Ω 10MΩ<R≤20MΩ * Rated Voltage: √PxR ELECTRICAL SPECIFICATIONS for ZERO OHM JUMPERS Series CJ20 (0201) CJ05 (0402) CJ06 (0603) CJ10 (08 05) CJ18 (1206) CJ14 (1210) CJ12 (2010) CJ01 (2512) Rated Current 0.5A (70 °C) 1A (70 °C) 1A (70 °C) 2A (70 °C) 2A (70 °C) 2A (70 °C) 2A (70 °C) 2A (70 °C) Resistance (Max) 50 m Ω 50 m Ω 50 m Ω 50 m Ω 50 m Ω 50 m Ω 50 m Ω 50 m Ω Max. Overload Current 1A 2.5A 2.5A 5A 5A 5A 5A 5A * Rated Voltage: √PxR

American Accurate Components, Inc. Thick Film Chip Resistors TEL: 949045309888 /rhombus4 FAX: 949045308889 /rhombus4 Email: sales@aacix.com DERATING CURVE For resistors operated at ambient temperature over 70°, power rating shall be derated in accordance with figure The rated voltage is calculated by the following formula: E= √P * R E= Rated Voltage(V), P= Rated Power(W), R= Resistance Value (Ω) RELIABILITY TESTS Test Items Reference standard Condition of Test Test Limits ∆R Temperature Coefficient of Resistance IEC601150104.8 JIS0C52010104.8 055~+125 °C Refer 5.0 Short Time Overload IEC601150104.13 JIS0C52010104.13 2.5 X rate voltage for 5 sec ±(1% + 0.05Ω) Remarks: 0Ω : 50mΩ or less Intermittent Overload IEC601150104.39 JIS0C52010104.39

3.0 X rated voltage or Max

Overloading voltage, 1sec “ON”, 25sec “OFF”, 10000 cycles Remarks: 02010NA, 0402 2.5 X RCWV*) ±(5.0% + 0.1Ω) 0Ω : 50mΩ or less Endurance (Load Life) IEC601150104.25.1 JIS0C5201010 4.25.1 1000 hours at rated voltage, 70°C, 1.5hours “ON”, 0.5hour “OFF” Remarks: 0Ω : 100mΩ or less Load Life with Humidity IEC601150104.24 JIS0C52010104.24 1000 hours at rated voltage, 40±2°C, 90~95% RH 1.5hours “ON”, 0.5hour “OFF” Remarks: 0Ω : 100mΩ or less Rapid Change of Temperature IEC601150104.19 JIS0C52010104.19 cycles Remarks: 0Ω : 50mΩ or less Solderability IEC601150104.17 JIS0C52010104.17 245±5°C solder, 2±0.5 sec dwell. Solder: Sn96.5 / Ag3.0 / Cu0.5 At least 95% of surface area of electrode shall be covered with new solder Robustness of Termination (Bending) IEC601150104.33 JIS0C52010104.33 3mm deflection 2mm deflection (RM20,25) Remarks: 0Ω : 50mΩ or less Dielectric Withstanding Voltage (Voltage Proof) IEC601150104.7 JIS0C52010104.7 Applying voltage: 0201: 50V, 0402 & 0603: 300V The other 500V for a minute No abnormalities such as flashover, burning dielectric breakdown shall appear Insulation Resistance IEC601150104.6 JIS0C52010104.6 Applying voltage 100V for 1 minute. Remark: 0201 50V ≥ 1GΩ Resistance to Dry Heat IEC601150104.23.2 JIS0C5201010 4.23.2 155±5°C for 96±4hours Remark: 0201 125±5°C Remarks: 0201 : ±(2.0% + 0.1Ω) 0Ω : 50mΩ or less Resistance to Solder Heat IEC601150104.18 JIS0C52010104.18 270±5°C solder, 10±1 sec dwell. Remarks: 0201 : ±(3.0% + 0.1Ω) 0Ω : 50mΩ or less Note: RCWV: Rated continuous working voltage Figure 1

American Accurate Components, Inc. Thick Film Chip Resistors TEL: 949045309888 /rhombus4 FAX: 949045308889 /rhombus4 Email: sales@aacix.com EIA Standard Values Decade Values in the EIA Standard E824 Series: Decade Values in the EIA Standard E 896 Series: Those items in a shaded box are also E024 values and will be marked with the EIA 3 Digit Code. VALUE MARKING For those parts ordered with an E024 value, the product will be marked with a 3 digit code. For those products ordered with an E096 value, the product will be marked with a 4 digit code. For those parts which fall under E096 and E024 values (e.g. 1K ohm is both an E096 and E024 value), the part will be marked with a 3 digit code; 4 digit markings for this type is available upon special request. 01005, 0201, and 0402 Size No marking E024 & E096 Values

0603 Size

EIA 96 Digit Code of 3.32K ohm E096 Values 0603, 0805, 1206, 1210, 2010, 2512 Sizes EIA 3 Digit Code of 10K ohm resistor E024 Values, E096 Values 0805, 1206, 1210, 2010 , 2512 Sizes EIA 4 Digit Code of 121K ohm resistor E096 Values

0603 MARKING CODE for E96 VALUES

By combining a specific two digit number and a letter code, you have a series of numeric/alpha digits that give you the complete (E96) resistance value codes for 0603 size part marking. Value Code Value Code Value Code Value Code 10.0 01 17.8 25 31.6 49 56.2 73 10.2 02 18.2 26 32.4 50 57.6 74 10.5 03 18.7 27 33.2 51 59.0 75 10.7 04 19.1 28 34.0 52 60.4 76 11.0 05 19.6 29 34.8 53 61.9 77 11.3 06 20.0 30 35.7 54 63.4 78 11.5 07 20.5 31 36.5 55 64.9 79 11.8 08 21.0 32 37.4 56 66.5 80 12.1 09 21.5 33 38.3 57 68.1 81 12.4 10 22.1 34 39.2 58 69.8 82 12.7 11 22.6 35 40.2 59 71.5 83 13.0 12 23.3 36 41.2 60 73.2 84 13.3 13 23.7 37 42.2 61 75.0 85 13.7 14 24.3 38 43.2 62 76.8 86 14.0 15 24.9 39 44.2 63 78.7 87 14.3 16 25.5 40 45.3 64 80.6 88 14.7 17 26.1 41 46.4 65 82.5 89 15.0 18 26.7 42 47.5 66 84.5 90 15.4 19 27.4 43 48.7 67 86.6 91 15.8 20 28.0 44 49.9 68 88.7 92 16.2 21 28.7 45 51.1 69 90.9 93 16.5 22 29.4 46 52.3 70 93.1 94 16.9 23 30.1 47 53.6 71 95.3 95 17.4 24 30.9 48 54.9 72 97.6 96 Letter Multiplier Cross Reference A =10 C = 1,000 E = 100,000 X = 1 B = 100 D = 10,000 F = 1,000,000 Y = 0.1

0603 Code Explanation Value

01B 01 = 10.0 & B = 100 10.0x100 = 1K Ω 25C 25 = 17.8 & C = 1,000 17.8x1,000 = 17.8K Ω 93D 93 = 90.9 & D = 10,000 90.9 x 10,000 = 909K Ω PACKAGE QUANTITY Type 01005 0201 0402 0603 0805 B 25,000 10,000 M 15,000 10,000 10,000 5,000 5,000 V 40,000 40,000 20,000 20,000 Type 1206 1210 2010 2512 B 5,000 M 5,000 5,000 4,000 4,000 V 20,000 20,000 20,000 20,000 51B 1213 103

American Accurate Components, Inc. Thick Film Chip Resistors TEL: 949045309888 /rhombus4 FAX: 949045308889 /rhombus4 Email: sales@aacix.com TAPE SCHEMATIC

01005 Size

0201 ~ 2512 Size TAPE DIMENSIONS (mm) 0201 0402 0603 0805 1206 1210 2010 2512 TAPE Type Resistor Size Press Pocket Carrier Tape 01005 Rect. Punching Carrier Paper Tape 0201, 0402, 0603, 0805, 1206, 1210 Plastic (Embossed Tape) 2010 & 2512 REEL DRAWINGS 7” Reel (M) 13” Reel (V) PACKAGE DIMENSIONS (mm) 7” Reel (M) 13” Reel (V) M 180 ± 3.0 330 ±2.5 H 1.20 2.3 ± 0.5 E 60 ± 1.0 80.0 ± 1.0 F 11.4 ± 1.0 14.4 LABEL DESCRIPTION One side surface of a reel is marked with a label with the following items of information. 1. Chip Resistor 2. Part Number 3. Tolerance 4. Quantity 5. Lot number for production month/year/suffix L* 6. Manufacturer’s name or symbol * The suffix “L” indicates that this item is lead free. As of September 2004, all new production items of the series CR and CJ are no longer containing tin/lead (SnPb) terminals; they are lead free and in compliance with Lead Free/RoHS. PACKAGE CONSTRUCTION /square6 3 Ring Binder Case Holder /square6 Plastic pages with slip holders for each value /square6 Each value is individually identified in a slip holder /square6 Resistors are packaged on paper tape strips The content may change without notification 7/21/2016.