DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

Features

■ Thick film technology ■ Power rating up to 3 watts @ 70 °C ■ High power surge withstanding ■ RoHS compliant* ■ Halogen free** ■ AEC-Q200 compliant ■ Sulfur-resistant design (ASTM-B809)

Applications

■ Power supplies ■ Digital meters ■ Consumer electronics ■ LED lighting ■ Industry control boards CHP-A Series Ultra-High Power Chip Resistors * RoHS Directive 2015/863, Mar 31, 2015 and Annex. ** Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

Electrical Characteristics

CHP0603A CHP0805A CHP1206A CHP2512A Power Rating @ 70 °C 0.33 W 0.5 W 0.75 W 3 W Operating Temperature Range -55 °C to +155 °C Derated to Zero Load at +155 °C Maximum Working Voltage 75 V 200 V 250 V 250 V Maximum Overload Voltage 125 V 300 V 500 V 500 V Resistance Tolerance ±1 %, ±5 % Temperature Coefficient 10 ohms to 1 megohm (±1 %, E24 & E96 Series) 10 ohms to 1 megohm (±5 %, E24 Series) ±100 ppm/°C ±200 ppm/°C ±100 ppm/°C ±200 ppm/°C ±100 ppm/°C ±200 ppm/°C ±100 ppm/°C ±200 ppm/°C *RoHS COMPLIANT **HALOGEN FREE Note: Solder pad and trace size should be evaluated and board surface temperature should not exceed +105 °C when applying full rated power. For Standard Values Used in Capacitors, Inductors and Resistors, click here. 01B WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov Additional Information Click these links for more information: PRODUCT SELECTOR TECHNICAL LIBRARY INVENTORY SAMPLES CONTACT

Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. CHP-A Series Ultra-High Power Chip Resistors Product Dimensions DIMENSIONS: MM (INCHES) Recommended Solder Pad Layout DIMENSIONS: MM (INCHES) L 100 W T CC DD B A L Surge Performance 1000 100 0.1 0.0001 0.001 0.1 CHP0603A CHP0805A CHP1206A CHP2512A 0.01 1 Pulse Duration (Seconds) Peak Power (Watts) Model L W C D T CHP0603A 1.60 ± 0.10 (.063 ± .004) 0.80 ± 0.10 (.031 ± .004) 0.30 ± 0.20 (.012 ± .008) 0.30 ± 0.20 (.012 ± .008) 0.45 ± 0.10 (.018 ± .004) CHP0805A 2.00 ± 0.10 (.079 ± .004) 1.25 ± 0.10 (.049 ± .004) 0.40 ± 0.20 (.016 ± .008) 0.40 ± 0.20 (.016 ± .008) 0.50 ± 0.10 (.020 ± .004) CHP1206A 3.10 ± 0.10 (.122 ± .004) 1.60 ± 0.10 (.063 ± .004) 0.50 ± 0.25 (.020 ± .010) 0.50 ± 0.25 (.020 ± .010) 0.55 ± 0.10 (.022 ± .004) CHP2512A 6.40 ± 0.20 (.252 ± .008) 3.10 ± 0.20 (.122 ± .008) 0.45 ± 0.25 (.018 ± .010) 1.80 ± 0.25 (.071 ± .010) 1.10 ± 0.20 (.043 ± .008) Model A B L CHP0603A 0.90 (.035) 1.00 (.039) 3.00 (.118) CHP0805A 1.30 (.051) 1.15 (.045) 3.50 (.138) CHP1206A 1.80 (.071) 1.30 (.051) 4.70 (.185) CHP2512A 3.70 (.146) 2.45 (.096) 7.60 (.299)

The rated voltage is calculated by the following formula: V= P X R V: Rated Voltage (V) P: Rated Power (W) R: Resistance Value (Ω) Construction OVERCOAT (BLACK) CONDUCTOR Sn PLATING CERAMIC SUBSTRATE RESISTIVE ELEMENT Ni PLATING Soldering Profile Derating Curve Environmental Characteristics Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. CHP-A Series Ultra-High Power Chip Resistors 125 175 225 275 0 50 100 150 200 250 300 Time (seconds) Temperature (°C) 60 - 120 seconds 90 - 150 seconds 260 °C peak 190 °C 150 °C 220 °C Ramp Down 6 °C/second 255 °C Maximum of 20 seconds between +255 °C and +260 °C Ramp Up 3 °C/second maximum 10 seconds minimum <1> <1> Ambient Temperature (°C) 70 155 100 -55 Power Ratio (%)

CHP 0603 A F X - 1002 E LF Model CHP = High Power Surge Resistor Size 0603 = 0603 Size 0805 = 0805 Size 1206 = 1206 Size 2512 = 2512 Size Feature A = AEC-Q200 Compliant Resistance Tolerance F = ±1 % J = ±5 % TCR (See Electrical Characteristics chart) W = ±200 PPM/°C X = ±100 PPM/°C) Resistance Value 1 % Tolerance: (example: 8252 = 82.5K ohms) 5 % Tolerance: (example: 474 = 470K ohms) Packaging E = 5,000 pieces on 180 mm (7 inch) plastic reel, paper tape - CHP0603, CHP0805, CHP1206 3,000 pieces on 180 mm (7 inch) reel, plastic tape - CHP2512 Termination LF = Tin-plated (RoHS Compliant) How to Order CHP-A Series Ultra-High Power Chip Resistors Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

Performance Characteristics CHP-A Series Ultra-High Power Chip Resistors Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Test Item Method Procedure Test Limits ΔR Electrical Characteristics AEC-Q200 Table 7.1 Measure the resistance value DC Resistance: F: ±1 % : J : ±5 % TCR: Within the specified High Temperature Exposure (Storage) AEC-Q200 Table 7.3 1000 hours @ T = 125 °C unpowered; Measurement at 24 ±2 hours after test conclusion Temperature Cycling AEC-Q200 Table 7.4 1000 cycles (-55 °C to +125 °C); Measurement at 24 ±2 hours after test conclusion No mechanical damage Moisture Resistance AEC-Q200 Table 7.6 Test 65 °C / 80-100 % RH / 10 cycles; Measurement at 24 ±2 hours after test conclusion (t = 24 hours/cycle) Biased Humidity AEC-Q200 Table 7.7 1000 hours 85 °C / 85 % RH, 10 % of operating power; Measurement at 24 ±2 hours after test conclusion Operational Life AEC-Q200 Table 7.8 Test 1000 hours @ TA = 125 °C at specified rated power; Measurement at 24 ±2 hours after test conclusion Mechanical Shock AEC-Q200 Table 7.13 Test peak value: 100 g’s, wave: hail-sine; Duration: 6 ms, Velocity: 12.3 ft/sec. Within product specification tolerance and no visible damage Vibration AEC-Q200 Table 7.14 5 g’s for 20 min., 12 cycles each of 3 orientations; Test from 10-2000 Hz No mechanical damage Resistance to Solder Heat AEC-Q200 Table 7.15 Solder dipping @ 270 °C ±5 °C for 10 sec. ±1 sec. No mechanical damage Thermal Shock AEC-Q200 Table 7.16 -55 to 155 °C / dwell time 15 min / max transfer time 20 sec / 300 cycles No mechanical damage ESD AEC-Q200-002 Test contact min. 1 KV ∆ R ≤ ±(1 % + 0.1 Ω) Solderability AEC-Q200 Table 7.18 a) Baking 155 °C 4H, dipping 235 °C 5 sec b) Steam 8H, dipping 215 °C 5 sec c) Steam 8H, dipping 260 °C 7 sec Over 95 % of termination must be covered with solder Flammability AEC-Q200 Table 7.20 UL-94 V-0 or V-1 are acceptable Refer UL-94 Board Flex AEC-Q200 Table 7.21 Bending 2 mm (2512, 1206), 3 mm (0805, 0603) No mechanical damage Terminal Strength AEC-Q200 Table 7.22 Force 1.8 Kg for 60 sec No mechanical damage Sulfur-Resistant ASTM B-809 +50 °C ±2 °C, 1000 hours ∆ R ≤ ±(1 % + 0.1 Ω)

±5 % (E24): CHP0603A, CHP0805A, CHP1206A, CHP2512A Resistance value is expressed by 3 digits. The first two digits represent the significant figures of the nominal resistance value in ohms; the third digit represents the exponent for a base of 10. Example: 301 = 30 x 101 = 300 ohms ±1 % (E24/E96): CHP0805A, CHP1206A, CHP2512A Resistance value is expressed by 4 digits. The first three digits represent the significant figures of the nominal resistance value in ohms; the third digit represents the exponent for a base of 10. Example: 1542 = 154 x 102 = 15.4K ohms ±1 % (E24): CHP0603A Resistance value is expressed by 3 digits. The first two digits represent the significant figures of the nominal resistance value in ohms; the third digit represents the exponent for a base of 10. Example: 222 = 22 x 102 = 2.2K ohms ±1 % (E96): CHP0603A Resistance value is expressed by 2 digits followed by an alpha character multiplier. (Refer to marking table below.) Example: 01B = 100 x 101 = 1K ohms Code R Value Code R Value Code R Value Code R Valu e Code R Value Code R Value Code R Value Code R Value 01 100 13 133 25 178 37 237 49 316 61 422 73 562 85 750 02 102 14 137 26 182 38 243 50 324 62 432 74 576 86 768 03 105 15 140 27 187 39 249 51 332 63 442 75 590 87 787 04 107 16 143 28 191 40 255 52 340 64 453 76 604 88 806 05 110 17 147 29 196 41 261 53 348 65 464 77 619 89 825 06 113 18 150 30 200 42 267 54 357 66 475 78 634 90 845 07 115 19 154 31 205 43 274 55 365 67 487 79 649 91 866 08 118 20 158 32 210 44 280 56 374 68 499 80 665 92 887 09 121 21 162 33 215 45 287 57 383 69 511 81 681 93 909 10 124 22 165 34 221 46 294 58 392 70 523 82 698 94 931 11 127 23 169 35 226 47 301 59 402 71 536 83 715 95 953 12 130 24 174 36 232 48 309 60 412 72 549 84 732 96 976 This table shows the first two digits for the three-digit E96 part marking scheme. The third character is a letter multiplier: A=100 B=101 C=102 D=103 E=104 F=105 G=10-6 H=10-7 X=10-1 Y=10-2 Z=10-3 301 1542 222 01B CHP-A Series Ultra-High Power Chip Resistors Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

Packaging Dimensions (Conforms to EIA RS-481A) Model Tape Type Pieces per Reel AB WF CHP0603A Paper 5,000 1.10 ± 0.20 (.043 ± .008) 1.90 ± 0.20 (.075 ± .008) 8.00 ± 0.30 (.315 ± .012) 3.50 ± 0.05 (.138 ± .002)CHP0805A 1.65 ± 0.20 (.065 ± .008) 2.40 ± 0.20 (.094 ± .008) CHP1206A 2.00 ± 0.20 (.079 ± .008) 3.60 ± 0.20 (.142 ± .008) CHP2512A Plastic 3,000 3.50 ± 0.20 (.138 ± .008) 6.70 ± 0.20 (.264 ± .008) 12.00 ± 0.30 (.472 ± .012) 5.50 ± 0.05 (.217 ± .002) DIMENSIONS: MM (INCHES) REV. 05/29/20 2.0 ± 0.5 (.079 ± .020) 178.0 ± 2.0 (7.008 ± .080) (.787)MIN. 13.0 ± 0.5 (.512 ± .020) 60.0 ± 0.5 (2.36 ± .020) 16.7 (.657) MAX. CHP2512: 14.9 (.587) MAX. CHP0603, CHP0805, CHP1206: 10.0 ± 1.5 (.394 ± .059)CHP0603, CHP0805, CHP1206: 13.8 ± 1.5 1.75 ± 0.10 (.069 ± .004) A 4.00 ± 0.10 (.157 ± .004) 4.00 ± 0.10 (.157 ± .004) 1.50 +0.10/-0 2.00 ± 0.05 (.079 ± .002) B W F CHP-A Series Ultra-High Power Chip Resistors Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Asia-Pacific: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com EMEA: Tel: +36 88 885 877 • Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com www.bourns.com

This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS\¸)V\\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\\[UV[PJL<ZLYZZOV\\SKJOLJRMVYHUKVI[HPU[OLSH[LZ[YLSL]HU[PUMVYTH[PVUHUK]LYPM\[OH[Z\\JOPUMVYTH[PVUPZJ\\YYLU[ and complete before placing orders for Bourns® products. The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical requirements in generic applications. The characteristics and parameters of a Bourns ®WYVK\\J[PUH\\ZLYHWWSPJH[PVUTH\]HY\ MYVT[OLKH[HZOLL[JOHYHJ[LYPZ[PJZHUKWHYHTL[LYZK\\L[VP[OLJVTIPUH[PVUVM[OL)V\\YUZ® product with other components PU[OL\\ZLY»ZHWWSPJH[PVUVYPP[OLLU]PYVUTLU[VM[OL\\ZLYHWWSPJH[PVUP[ZLSM;OLJOHYHJ[LYPZ[PJZHUKWHYHTL[LYZVMH)V\\YUZ® WYVK\\J[HSZVJHUHUKKV]HY\PUKPɈLYLU[HWWSPJH[PVUZHUKHJ[\\HSWLYMVYTHUJLTH\]HY\V]LY[PTL<ZLYZZOV\\SKHS^H\Z]LYPM\ the actual performance of the Bourns ®WYVK\\J[PU[OLPYZWLJPÄJKL]PJLZHUKHWWSPJH[PVUZHUKTHRL[OLPYV^UPUKLWLUKLU[ Q\\KNTLU[ZYLNHYKPUN[OLHTV\\U[VMHKKP[PVUHS[LZ[THYNPU[VKLZPNUPU[V[OLPYKL]PJLVYHWWSPJH[PVU[VJVTWLUZH[LMVY KPɈLYLUJLZIL[^LLUSHIVYH[VY\HUKYLHS^VYSKJVUKP[PVUZ <USLZZ)V\\YUZOHZL_WSPJP[S\KLZPNUH[LKHUPUKP]PK\\HS)V\\YUZ® product as meeting the requirements of a particular industry Z[HUKHYKLN0:6;: VYHWHY[PJ\\SHYX\\HSPÄJH[PVULN<3SPZ[LKVYYLJVNUPaLK)V\\YUZPZUV[YLZWVUZPISLMVYHU\ MHPS\\YLVMHUPUKP]PK\\HS)V\\YUZ®WYVK\\J[[VTLL[[OLYLX\\PYLTLU[ZVMZ\\JOPUK\\Z[Y\Z[HUKHYKVYWHY[PJ\\SHYX\\HSPÄJH[PVU<ZLYZ of Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to [OLPYKL]PJLZVYHWWSPJH[PVUZ Bourns®WYVK\\J[ZHYLUV[YLJVTTLUKLKH\\[OVYPaLKVYPU[LUKLKMVY\\ZLPUU\\JSLHYSPMLZH]PUNSPMLJYP[PJHSVYSPMLZ\\Z[HPUPUN HWWSPJH[PVUZUVYPUHU\V[OLYHWWSPJH[PVUZ^OLYLMHPS\\YLVYTHSM\\UJ[PVUTH\YLZ\\S[PUWLYZVUHSPUQ\\Y\KLH[OVYZL]LYLWYVWLY[\ VYLU]PYVUTLU[HSKHTHNL<USLZZL_WYLZZS\HUKZWLJPÄJHSS\HWWYV]LKPU^YP[PUNI\[^VH\\[OVYPaLK)V\\YUZYLWYLZLU[H[P]LZ on a case-by-case basis, use of any Bourns ®WYVK\\J[ZPUZ\\JO\\UH\\[OVYPaLKHWWSPJH[PVUZTPNO[UV[ILZHMLHUK[O\\ZPZH[ [OL\\ZLY»ZZVSLYPZR3PMLJYP[PJHSHWWSPJH[PVUZPUJS\\KLKL]PJLZPKLU[PÄLKI\[OL<:-VVKHUK+Y\\N(KTPUPZ[YH[PVUHZ*SHZZ000 KL]PJLZHUKNLULYHSS\LX\\P]HSLU[JSHZZPÄJH[PVUZV\\[ZPKLVM[OL<UP[LK:[H[LZ )V\\YUZL_WYLZZS\PKLU[PÄLZ[OVZL)V\\YUZ ®Z[HUKHYKWYVK\\J[Z[OH[HYLZ\\P[HISLMVY\\ZLPUH\\[VTV[P]LHWWSPJH[PVUZVUZ\\JO WYVK\\J[Z»KH[HZOLL[ZPU[OLZLJ[PVULU[P[SLK¸(WWSPJH[PVUZ¹<USLZZL_WYLZZS\HUKZWLJPÄJHSS\HWWYV]LKPU^YP[PUNI\[^V H\\[OVYPaLK)V\\YUZYLWYLZLU[H[P]LZVUHJHZLI\JHZLIHZPZ\\ZLVMHU\V[OLY)V\\YUZ®Z[HUKHYKWYVK\\J[ZPUHUH\\[VTV[P]L HWWSPJH[PVUTPNO[UV[ILZHMLHUK[O\\ZPZUV[YLJVTTLUKLKH\\[OVYPaLKVYPU[LUKLKHUKPZH[[OL\\ZLY»ZZVSLYPZR0M)V\\YUZ L_WYLZZS\PKLU[PÄLZHZ\\IJH[LNVY\VMH\\[VTV[P]LHWWSPJH[PVUPU[OLKH[HZOLL[MVYP[ZZ[HUKHYKWYVK\\J[ZZ\\JOHZPUMV[HPUTLU[ VYSPNO[PUNZ\\JOPKLU[PÄJH[PVUTLHUZ[OH[)V\\YUZOHZYL]PL^LKP[ZZ[HUKHYKWYVK\\J[HUKOHZKL[LYTPULK[OH[PMZ\\JO)V\\YUZ Z[HUKHYKWYVK\\J[PZJVUZPKLYLKMVYWV[LU[PHS\\ZLPUH\\[VTV[P]LHWWSPJH[PVUZP[ZOV\\SKVUS\IL\\ZLKPUZ\\JOZ\\IJH[LNVY\VM H\\[VTV[P]LHWWSPJH[PVUZ(U\YLMLYLUJL[V)V\\YUZ ®Z[HUKHYKWYVK\\J[PU[OLKH[HZOLL[HZJVTWSPHU[^P[O[OL(,*8Z[HUKHYK VY¸H\\[VTV[P]LNYHKL¹KVLZUV[I\P[ZLSMTLHU[OH[)V\\YUZOHZHWWYV]LKZ\\JOWYVK\\J[MVY\\ZLPUHUH\\[VTV[P]LHWWSPJH[PVU Bourns®Z[HUKHYKWYVK\\J[ZHYLUV[[LZ[LK[VJVTWS\^P[O<UP[LK:[H[LZ-LKLYHS(]PH[PVU(KTPUPZ[YH[PVUZ[HUKHYKZNLULYHSS\ VYHU\V[OLYNLULYHSS\LX\\P]HSLU[NV]LYUTLU[HSVYNHUPaH[PVUZ[HUKHYKHWWSPJHISL[VWYVK\\J[ZKLZPNULKVYTHU\\MHJ[\\YLKMVY \\ZLPUHPYJYHM[VYZWHJLHWWSPJH[PVUZ)V\\YUZL_WYLZZS\PKLU[PÄLZ)V\\YUZ® standard products that are suitable for use in aircraft VYZWHJLHWWSPJH[PVUZVUZ\\JOWYVK\\J[Z»KH[HZOLL[ZPU[OLZLJ[PVULU[P[SLK¸(WWSPJH[PVUZ¹<USLZZL_WYLZZS\HUKZWLJPÄJHSS\ HWWYV]LKPU^YP[PUNI\[^VH\\[OVYPaLK)V\\YUZYLWYLZLU[H[P]LZVUHJHZLI\JHZLIHZPZ\\ZLVMHU\V[OLY)V\\YUZ ® standard WYVK\\J[PUHUHPYJYHM[VYZWHJLHWWSPJH[PVUTPNO[UV[ILZHMLHUK[O\\ZPZUV[YLJVTTLUKLKH\\[OVYPaLKVYPU[LUKLKHUKPZH[ the user’s sole risk. ;OL\\ZLHUKSL]LSVM[LZ[PUNHWWSPJHISL[V)V\\YUZ ® custom products shall be negotiated on a case-by-case basis by Bourns and the user for which such Bourns®J\\Z[VTWYVK\\J[ZHYLZWLJPHSS\KLZPNULK(IZLU[H^YP[[LUHNYLLTLU[IL[^LLU)V\\YUZ HUK[OL\\ZLYYLNHYKPUN[OL\\ZLHUKSL]LSVMZ\\JO[LZ[PUN[OLHIV]LWYV]PZPVUZHWWSPJHISL[V)V\\YUZ® standard products shall also apply to such Bourns® custom products. Users shall not sell, transfer, export or re-export any Bourns®WYVK\\J[ZVY[LJOUVSVN\MVY\\ZLPUHJ[P]P[PLZ^OPJOPU]VS]L[OL KLZPNUKL]LSVWTLU[WYVK\\J[PVU\\ZLVYZ[VJRWPSPUNVMU\\JSLHYJOLTPJHSVYIPVSVNPJHS^LHWVUZVYTPZZPSLZUVYZOHSS[OL\\\ZL Bourns®WYVK\\J[ZVY[LJOUVSVN\PUHU\MHJPSP[\^OPJOLUNHNLZPUHJ[P]P[PLZYLSH[PUN[VZ\\JOKL]PJLZ;OLMVYLNVPUNYLZ[YPJ[PVUZ HWWS\[VHSS\\ZLZHUKHWWSPJH[PVUZ[OH[]PVSH[LUH[PVUHSVYPU[LYUH[PVUHSWYVOPIP[PVUZPUJS\\KPUNLTIHYNVZVYPU[LYUH[PVUHS YLN\\SH[PVUZ-\\Y[OLY)V\\YUZ® products and Bourns technology and technical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without WYPVYH\\[OVYPaH[PVUMYVT)V\\YUZHUKVY[OL<:.V]LYUTLU[ILYLZVSK[YHUZMLYYLKVYYLL_WVY[LK[VHU\WHY[\UV[LSPNPISL [VYLJLP]L<:JVTTVKP[PLZZVM[^HYLHUK[LJOUPJHSKH[H ;V[OLTH_PT\\TL_[LU[WLYTP[[LKI\HWWSPJHISLSH^)V\\YUZKPZJSHPTZPHU\HUKHSSSPHIPSP[\MVYZWLJPHSW\\UP[P]LJVUZLX\\LU[PHS PUJPKLU[HSVYPUKPYLJ[KHTHNLZVYSVZ[YL]LU\\LZVYSVZ[WYVÄ[ZHUKPPHU\HUKHSSPTWSPLK^HYYHU[PLZPUJS\\KPUNPTWSPLK^HYYHU[PLZ VMÄ[ULZZMVYWHY[PJ\\SHYW\\YWVZLUVUPUMYPUNLTLU[HUKTLYJOHU[HIPSP[\ )RU\\RXUFRQYHQLHQFHFRSLHVRIWKLV/HJDO'LVFODLPHU1RWLFHZLWK*HUPDQ6SDQLVK-DSDQHVH7UDGLWLRQDO&KLQHVHDQG6LPSOLÀHG&KLQHVH bilingual versions are available at: Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf