CHP TTELEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

2.5 x for 5 seconds General Note IRC reserves the right to make changes in product specifi cation without notice or liability. All information is subject to IRC’s own data and is considered accurate at time of going to print. A subsidiary of TT electronics plc• 4222 South Staples Street • Corpus Christi Texas 78411 USA© IRC Wire and Film Technologies Division Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com Metal GlazeTM thick fi lm element fi red at 1000°C to solid ceramic Solder over nickel barrier High temperature dielectric coating Electrical Data

  • Up to 2 watts
  • Up to 1000 volts
  • 0.2 ohm to 2.2 megohm range
  • RoHS-compliant version available
  • 150°C maximum operating temperature Environmental Data IRC Type Indus- try Foot- print Size Code1 Maximum Power Rating Working Voltage² Maximum Voltage Resistance Range (ohms)³ Product Category Tolerance (±%)³ TCR (ppm/°C)³ CHP 1/8 1206 B & C 1/4W @ 70°C 200 400 0.1 to 0.99 Low Range 1, 2, 5 100 1.0 to 1.0 M Standard 1, 2, 5 50, 100 20 to 348K Tight Tolerance 0.25, 0.5 50, 100 CHP 1/2 2010 D & E 1/2W @ 70°C 300 600 0.1 to 0.99 Low Range 1, 2, 5 100 1.0 to 348K Standard 1, 2, 5 50, 100 CHP 1 2512 F 1W @ 70°C 350 700 0.1 to 0.99 Low Range 1, 2, 5 100 1.0 to 2.21M Standard 1, 2, 5 50, 100 20 to 348K Tight Tolerance 0.25, 0.5 50, 100 CHP 2 3610 H 2W @ 25°C 1.33W @ 70°C 500 1000 0.2 to 0.99 Low Range 1, 2, 5 100 1.0 to 2.21M Standard 1, 2, 5 50, 100 ¹See pages 2 & 3 for product dimensions, recommended solder pads, and standard packaging. ²Not to exceed P x R ³Consult factory for tighter TCR, tolerance, or resistance values.√ dohteM tseTegnahC mumixaMscitsiretcarahC Temperature Coeffi cient As specifi ed MIL-R-55342H Par 3.16 (-55°C + 125°C) P x R Thermal Shock ±0.5% + 0.01 ohm MIL-R-55342H Par 3.9 (-65°C + 150°C, 5 cycles) Low Temperature Operation ±0.25% + 0.01 ohm MIL-R-55342H Par 3.11 (-65°C @ working voltage) Short Time Overload ±0.5% + 0.01 ohm ±1% for R>100K ohm MIL-R-55342H Par 3.12 High Temperature Exposure ±0.5% + 0.01 ohm MIL-R-55342H Par 3.13 (-150°C for 100 hours) Resistance to Bonding ±0.25% + 0.01 ohm MIL-R-55342H Par 3.14.2 (Refl ow soldered to board at 260°C for 10 seconds) Exposure 95% minimum coverage MIL-STD-202, Method 208 (245°C for 5 seconds) Solderability ±0.5% + 0.01 ohm MIL-R-55342H Par 3.18 (10 cycles, total 240 hours) Moisture Resistance ±0.5% + 0.01 ohm MIL-R-55342H Par 3.15 (2000 hours at 70°C intermittent) Life Test Terminal Adhesion Strength ±1% + 0.01 ohm no mechanical damage 1200 gram push from underside of mounted chip for 60 seconds ±1% + 0.01 ohm no mechanical damage Chip mounted in center of 90mm long board, defl ected 1mm so as to exert pull on chip contacts for 5 seconds CHP Cylindrical High Power Surface Mount Metal GlazeTM CHP Series Issue March 2011 Sheet 1 of 3 Cylindrical High Power Surface Mount Metal Glaze™ CHP Series Up to 2 watts Up to 1000 volts 0.2 ohm to 2.2 megohm range RoHS-compliant version available 150°C maximum operating temperature AEC-Q200 Metal Glaze™ thick film element fired at 1000°C to solid ceramic High temperature dielectric coating Solder over nickel barrier Characteristics Maximum Change Test Method Thermal Shock ±0.25% +.01 Ω MIL-PRF-55342H, §4.8.3 (MIL-STD-202, Method 107G: +150°C / -65°C) Low Temperature Operation ±0.25% +.01 Ω MIL-PRF-55342H, §4.8.5 (-65°C) Short Time Overload ±0.5% +.01 Ω ±1% for R>100KΩ MIL-PRF-55342H, §4.8.6 High Temperature Exposure ±0.5% +.01 Ω MIL-PRF-55342H, §4.8.7 (150°C x 100 Hours) (MIL-STD-202, Method 106G) Temperature Coefficient As specified MIL-PRF-55342H, §4.8.10 (MIL-STD-202, Method 304) Life Test ±1% +.01 Ω MIL-PRF-55342H, §4.8.11 (MIL-STD-202, Method 108A: 2000 Hours @ 70°C) Solderability 95% minimum coverage MIL-PRF-55342H, §4.8.12 (MIL-STD-202, Method 208H) Terminal Adhesion Strength (push) ±1% +.01 Ω (no mechanical damage) IRC – defined 1200 gram push from underside of mounted device for 60 sec Terminal Adhesion Strength (flex) ±1% +.01 Ω (no mechanical damage) IRC-defined Device mounted in center of 90mm long board, deflected 1 mm to exert pull on contacts for 5 seconds Resistors All Pb-free parts comply with EU Directive 2011/65/EU (RoHS2) 05.17 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT Electronics plc http://www.ttelectronics.com/resistors BI Technologies IRC Welwyn

Surface Mount Metal Glaze™ CHP Series

  • 4222 South Staples Street • Corpus Christi Texas 78411 USA© IRC Wire and Film Technologies Division Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com Physical Data IRC Type Size Code Industry Footprint Actual Size Dimensions (Inches and (mm)) CHP 1/8 B 1206 0.128 ± 0.007 L W C (3.25 ± 0.18) 0.057 ± 0.006 (1.45 ± 0.15) 0.020 ± 0.010 (0.51 ± 0.25) CHP 1/2 D 2010 0.200 ± 0.010 (5.08 ± 0.25) 0.030 ± 0.010 (0.761 ± 0.25) CHP 1 F 2512 0.251 ± 0.010 (6.38 ± 0.25) 0.040 ± 0.010 (1.02 ± 0.25) CHP 2 H 3610 0.367 ± 0.010 (9.32 ± 0.25) 0.050 ± 0.010 (1.27 ± 0.25) Recommended Solder Pad Dimensions (Refl ow): Size Code Industry Footprint Dimensions (Inches and mm)) ABCD E F B & C 1206 0.076 (1.93) 0.093 (2.36) 0.058 (1.47) 0.098 (2.49) 0.032 (0.81) 0.211 (5.36) D 2010 0.111 (2.82) 0.126 (3.20) 0.096 (2.44) 0.152 (3.86) 0.040 (1.02) 0.318 (8.08) E 2010 0.170 (4.32) 0.160 (4.06) 0.072 (1.83) 0.132 (3.35) 0.044 (1.12) 0.412 (10.46) F 2512 0.121 (3.07) 0.126 (3.20) 0.127 (3.23) 0.183 (4.65) 0.040 (1.02) 0.369 (9.37) H 3610 0.170 (4.32) 0.160 (4.06) 0.213 (5.41) 0.273 (6.93) 0.044 (1.12) 0.553 (14.05) F EB D A C A L C W CHP Cylindrical High Power Surface Mount Metal GlazeTM CHP Series Issue March 2011 Sheet 2 of 3 05.17 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT Electronics plc http://www.ttelectronics.com/resistors BI Technologies IRC Welwyn
  • 4222 South Staples Street • Corpus Christi Texas 78411 USA© IRC Wire and Film Technologies Division Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com IRC Type Size Code Industry Footprint Reel Diameter* Quantity Per Reel Carrier Tape Width Component Pitch CHP 1/8 MRC 1/2 B C 1206 7″ 2,500 max. 8mm 4mm 13″ 10,000 max. CHP 1/2 MRC 1 D E 2010 7″ 1,500 max. 12mm 4mm 13″ 5,000 max. CHP 1 F 2512 7″ 1,500 max. 12mm 4mm 13″ 5,000 max. CHP 2 H 3610 13″ 1,500 max. 24mm 4mm *The 13″ reel is considered standard and will be supplied unless otherwise specifi ed. Sample Part No. IRC Type (CHP 1/8, CHP 1/2, CHP 1, or CHP 2) Temperature Coeffi cient (50 ppm, 100 ppm) Resistance Value (100 ohms and greater - First 3 signifi cant digits plus 4th digit multiplier) Example: 100 ohms = 1000, 1000 ohms = 1001, 150,000 ohms = 1503 (Less than 100 ohms - "R" is used to designate decimal) Example: 51 ohms = 51R0, 1 ohm = 1R00, 0.25 ohms = R250 Tolerance Packaging Code* (BLK = Bulk, 7 = 7" Reel, 13 = 13" Reel) Lead Free Construction Ordering Data CHP 1 - 100 2203 F 13 LF 30 40 50 60 70 80 90 100 110 120 130 140 150 % of Rated Power 100 Ambient Temperature (°C) CHP 1/8, 1/2, 1 CHP 2 Power Derating Curve Repetitive Surge Curve .1msec 1msec 10msec 100msec 10000msec Peak Power (watts) Surge or Pulse Duration (seconds) CHP 1 CHP 2 CHP 1/8 1000 100 Note: Use for repetitive pulses where the average power dissipation is not to exceed the component rating at 70°C. Surge handling capacity for low-repetitive surges may be signifi cantly greater than shown above. Contact factory for recommendations. CHP Cylindrical High Power Surface Mount Metal GlazeTM Standard Reel Packaging per EIA-481: CHP Series Issue March 2011 Sheet 3 of 3 Cylindrical High Power Surface Mount Metal Glaze™ CHP Series 05.17 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT Electronics plc http://www.ttelectronics.com/resistors BI Technologies IRC Welwyn

This product has two valid part numbers: European (Welwyn) Part Number: CHP1-220KFI (CHP1 with TCR ±100ppm/°C at 220 kilohms ±1%, Pb- free) C H P 1 - 2 2 0 K F I 1 2 3 4 5 USA (IRC) Part Number: CHP11002203FLF (CHP1 with TCR ±100ppm/°C at 220 kilohms ±1%, Pb-free) C H P 1 1 0 0 2 2 0 3 F L F 1 2 3 4 5 1 2 3 4 5 Type TCR (ppm/°C) Value Tolerance Termination & Packing CHP1/8 Omit for ±100 E24 = 3/4 characters E96 = 4/5 characters R = ohms K = kilohms M = megohms C = ±0.25% I = Pb-free, Tape Pack CHP1/2 -50 = ±50 D = ±0.5% PB = SnPb, Tape Pack CHP1 F = ±1% CHP1/8 Tape 2500/7” reel CHP2 G = ±2% CHP1/2, 1 1500/7” reel J = ±5% 1 2 3 4 5 Type TCR Value Tolerance Termination & Packing CHP1/8 50 = ±50 3 digits + multiplier C = ±0.25% Omit for SnPb, Standard pack CHP1/2 100 = ±100 R = ohms for values <100 ohms D = ±0.5% LF = Pb-free, Standard pack CHP1 F = ±1% CHP1/8 2500/7” reel CHP2 G = ±2% CHP1/2 & 1 1500/7” reel J = ±5% CHP2 1500/13” reel CHP2 1500/13” reel Cylindrical High Power Surface Mount Metal Glaze™ CHP Series 05.17 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT Electronics plc http://www.ttelectronics.com/resistors BI Technologies IRC Welwyn