CHO5 SENSATA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

Features

  • Robustness and excellent resistance to shocks / vibrations
  • High protection level IP65
  • High resolutions, up to 16 bits (Gray or binary)
  • Universal power supply from 5 to 30 Vdc
  • High performances in temperature –20°C to 90°C (option –40°C to 100°C)
  • Standard DIRECTION entry, RESET option
  • Digital or sine incremental outputs option | CHO5 BISS ABSOLUTE SINGLE TURN ENCODERS

www.sensata.com Page 2 Copyright © 2018 Sensata Technologies, Inc. Power Supply Vcc 5 to 30Vdc (polarity protected) Consumption Without Load Max 100mA Introduction < 1 s Inputs DIRECTION and RESET option Outputs Level high ≥ 2,5V (for I=20mA) Load high ≤ -20mA BiSS: RS-422 Level low ≤ 0,5Vdc (for I=20mA) Load low ≤ 20mA SPECIFICATIONS Material Cover: Zinc Alloy Body: Aluminum Shaft: Stainless Steel Bearings 6803 series Maximal Loads Axial: 20 N Radial: 50 N Shaft Inertia ≤ 2,2.10-6 kg.m2 Torque ≤ 6.10-3 N.m Permissable Max. Speed 9,000 min-1 Continuous Max. Speed 6,000 min-1 Shaft Seal Viton Shocks (EN60068-2-27) ≤ 500 m.s-2 (during 6 ms) Vibrations (EN60068-2-6) ≤ 100 m.s-2 (10 ... 2,000 Hz) EMC EN 61000-6-4, EN 61000-6-2 Isolation 1,000 Veff Weight (Connector) 0,270 kg Operating Temperature - 20 ... 90°C (encoder T°) Storage Temperature - 40 ... + 100°C Protection (EN 60529) IP 65 Torque (Ring Pressure Screw) 0,7 ... 0,9 N.m Theoretical mechanical lifetime 109 turns (Faxial / Fradial)

10 N / 25 N 230

25 N / 50 N 29

www.sensata.com Page 3 Copyright © 2018 Sensata Technologies, Inc. Dimensions in mm DIMENSIONS CHO5_14 connection C6R (radial M23), with DAC 9445/015 mounted on the body CHO5_14 connection C5R (radial cable), with DAC 9445/015 mounted on the cover BiSS STANDARD CONNECTION Type Vcc 0V Clk+ Data+ Data- Clk- Direction C6 1 2 3 4 6 7 9 C5 BN - Brown WH - White GN - Green GY - Grey PK - Pink YE - Yellow RD - Red C8 8 1 3 2 10 11 5 Direction - of the code coherence - of the LED internal regulated current loop - of temperature range with 2 limits

AGENCY APPROVALS & CERTIFICATIONS ORDERING OPTIONS Family Shaft Ø Supply Output Stage Code Resolution Connection Orientation CHO5 14: 14mm Reduction hubs available P: 5 to 30Vdc CB: BiSS Electronic B: Binary G: Gray Power of 2 13: 13 bits to 16: 16 bits C6: M23 12 pins CW for SSI transmission C8: M23 12 pins CW for SSI transmission C5: SSI cable, cable gland output R: Radial Example: R020: radial cable of 2m CH05 14 P CB G 13 C5 R050 Monitoring function available in option: Input / output avalable in option: - of the code coherence - of the LED internal regulated current loop - of temperature range with 2 limits - RESET input - ERROR output for monitoring functions - Sine & Cosine outputs without index, 2048ppr (option : 4096 ppr) - A & B incremental outputs without index, 2048ppr (option : 4096 ppr) Example : CHO5_14//PCBG//13//C5R050 Contact the factory for special versions, ex: special flanges, electronics, connections… Made in France _ // // // Page 4 Rev:05/15/18 www.sensata.com CONTACT USCopyright © 2018 Sensata Technologies, Inc. Sensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, evaluation and judgment in designing Buyer’s systems and products. Sensata data sheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that specifically described in the published documentation for a particular data sheet. Sensata may make corrections, enhancements, improvements and other changes to its data sheets or components without notice. Buyers are authorized to use Sensata data sheets with the Sensata component(s) identified in each particular data sheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATA SHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATA SHEETS OR USE OF THE DATA SHEETS, EXPRESS, IMPLIED OR STATUTORY , INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY , FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATA SHEETS OR USE THEREOF. All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA. Americas +1 (800) 350 2727 – Option 1 sales.beisensors@sensata.com Europe, Middle East & Africa +33 (3) 88 20 8080 position-info.eu@sensata.com Asia Pacific sales.isasia@list.sensata.com China +86 (21) 2306 1500 Japan +81 (45) 277 7117 Korea +82 (31) 601 2004 India +91 (80) 67920890 Rest of Asia +886 (2) 27602006 ext 2808