CHCC1DI-48U

CHM1DIU COOPER | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 12

Technical content

Compact Modular Fuse Holders With the Industry’s Best Ratings Products for PV, IEC and UL Applications

made simple™

Compact DIN-Rail Mountable Fuse Holders Accessories Provide Greater Flexibility Save time and money by reducing wiring and components. Advanced comb-bus bar and PLC communication accessories expand design possibilities while delivering superior performance. Ease of Use Easy to identify and specify, product color coding shows PV, IEC and UL holders at a glance. Optional factory-installed neutral pole and open fuse indication speeds troubleshooting. In stock for QuikShip Everyday Service - 90% of our orders ship within 24 hours. QuikShip Emergency Service ensures you’re covered 24/7, 365 with “Next flight out” courier service. Best Ratings With a wide wire range and industry leading ratings - up to 32A, 1000V, 200kA SCCR – the new CH Series provides worldwide acceptance and easy specification – including the latest PV fuse holder standard (UL 4248-18) Smallest Footprint The CH Series conserves valuable panel space. Up to 10 percent smaller than the competition. Cooper Bussmann CH Series finger-safe modular fuse holders offer a set of advantages you can’t find anywhere else. Service

Modular Fuse Holder Specifications and Selection Guide With Indicator Without Indicator CHM1DIU CHM1DU 1 CHM2DIU CHM2DU 2 CHM3DIU CHM3DU 3 CHM4DIU CHM4DU 4 CHM1DNIU CHM1DNU 1 pole + 1 neutral CHM3DNIU CHM3DNU 3 poles + 1 neutral CHM1DI-48U UL 48Vdc/30A; IEC 48Vdc/32A CHM1DNXU IEC 690V/32A IEC60269-2 1 neutral n/a n/a CHPV1IU CHPV1U 1 CHPV2IU CHPV2U 2 CHCC1DIU CHCC1DU 1 CHCC2DIU CHCC2DU 2 CHCC3DIU CHCC3DU 3 CHCC1DI-48U UL 48Vdc/30A 1 SCCR Rating Cooper Bussmann Fuses Voltage & Current Catalog Number Agency Markings Number of Poles Terminal Rating Series & Size CHPV CHCC Class CC CHM 10x38 and Midget UL & IEC; 1000Vdc/30A UL; CSA; UL4248-18; IEC60269-1; CCC Solid, Stranded, Fine Stranded, Spade Lug, Comb Bus Bar; Single and Dual Wire; 75ºC and 90ºC Cu wire 33kA UL 600V/30A 200kA rms sym UL 600V/30A; IEC 690V/32A UR; IEC 60269-2; CSA; CCC LP-CC, FNQ-R, KTK-R UL; CSA; CCC 200kA rms sym FNQ, KLM, FNM, KTK, BAF, FWA, DCM, C10 SERIES, AGU, BAN, FWC Solar PV series IEC 60269-2 UR; IEC 60269-2; CSA; CCC Specifications Agency Information: UL File E14853 Guide IZLT Listed, IZLT2 Recognized CSA: File 47235, CHPV and CHM - Class 6225-30, CHCC - Class 6225-01 Ratings: 600V/30A (UL) 690V/32A (IEC) Wire Range: #18 to #4 (0.8mm2 to 21.1mm2) Torque Ratings: 30 Lb-In (3.4 N•m) maximum Flammability Ratings: UL 94V0, self-extinguishing Storage & Operating Temperature Range: -20ºC to +90ºC (indicating) -20ºC to +120ºC (non-indicating) Features and Benefits

• High SCCR rated, UL Listed Class CC holder with indicator option for 600Vac/dc and 48Vdc.
• UL Recognized midget and 10 x 38 holders with factory assembled neutral pole option.
• Agency ratings up to 1000Vdc for use with solar PV fuses.
• Available remote PLC indication with the CH-PLC module.
• Rated for use with 75ºC or 90ºC wire, fine stranded wire, spade terminals and comb-bus bars. Use any higher temperature rated wire with appropriate derating.
• Complete range of UL Listed and high SCCR rated 1-phase and 3-phase finger-safe comb-bus bars and power feed lugs.

Use multi-pole connection kit part number JV-L to gang multiple poles together. One JV-L kit is sufficient to gang up to 4 poles. Dimensional Data - mm (in) 17.5 [ 0.689 ] [ 1.378 ] 52.5 [ 2.067 ] [ 2.756 ] 73.88 [ 2.909 ] 42.58 [ 1.676 ] 52.83 [ 2.080 ] 61.83 [ 2.434 ] 18.59 [ 0.732 ] 83.19 [ 3.275 ] [ 0.354 ] 7.5 [ 0.295 ] Modular Fuse Holder Features and Installation Guide Removing Instructions 1. Press down on top of DIN-Rail 2. Rotate out on the bottom 4mm Lockout Feature in Fuse Carrier Toolless Ganging of Multiple Poles Toolless DIN Rail Mounting Wire Strip Length Indicator 6mm Wire Clamp Lug and open bus bar connection (#4 to #18) Captive, Fully Backed Out Phil-Slot Screw Spade lug connection Self-Extinguishing, UL 94V0 Rated Polyester Material Label Slot Optional Open Fuse Indicator Hole for Wire Security Tag

Features

CHPV & CHPVI (PV Applications) PV 10X38 1000V 30A Rated: 600V, 30A 50/60Hz 200kA RMS SYM Indication Min Voltage: 90V Degree of Protection IP20 MADE IN CHINA Series: CHCC 430P USE CLASS CC FUSE 75ºC OR 90ºC CU WIRE DO NOT OPEN UNDER LOAD Wire Range Conductor No. of TorqueType Conductors 18-14 AWG 20 in-lbs (0.8-2.0mm2) Single 2.3 Nm 18-16 AWG 25 in-lbs (0.8-1.3mm2) Solid, Dual 2.8 Nm 14-10 AWG Stranded (2.0-5.2mm2) 12-10 AWG (3.3-5.2mm2) 8-4 AWG Stranded, 30 in-lbs (8.3-21.1mm2) Fine 3.4 Nm Stranded 18-14 AWG Spade Single (0.8-2.0mm2) Terminal N/A Comb Bus GB13539 Class CC 600V 30A N SOLID LINK 10X38 N Midget 10X38 690V 32A Rated: 48Vdc, 30A 200kA RMS SYM Indication Min Voltage: 15V Degree of Protection IP20 MADE IN CHINA Series: CHCC 430P USE CLASS CC FUSE 75ºC OR 90ºC CU WIRE DO NOT OPEN UNDER LOAD Wire Range Conductor No. of TorqueType Conductors 18-14 AWG 20 in-lbs (0.8-2.0mm2) Single 2.3 Nm 18-16 AWG 25 in-lbs (0.8-1.3mm2) Solid, Dual 2.8 Nm 14-10 AWG Stranded (2.0-5.2mm2) 12-10 AWG (3.3-5.2mm2) 8-4 AWG Stranded, 30 in-lbs (8.3-21.1mm2) Fine 3.4 Nm Stranded 18-14 AWG Spade Single (0.8-2.0mm2) Terminal N/A Comb Bus GB13539 Class CC 48Vdc 30A Rated: 48Vdc, 30A 200kA RMS SYM 3W Indication Min Voltage: 15V IEC: 60269-2 32A 48Vdc 120kA 3W Degree of Protection IP20 MADE IN CHINA Series: CHM Wire Range Conductor No. of TorqueType Conductors 18-14 AWG 20 in-lbs (0.8-2.0mm2) Single 2.3 Nm 18-16 AWG 25 in-lbs (0.8-1.3mm2) Solid, Dual 2.8 Nm 14-10 AWG Stranded (2.0-5.2mm2) 12-10 AWG (3.3-5.2mm2) 8-4 AWG Stranded, 30 in-lbs (8.3-21.1mm2) Fine 3.4 Nm Stranded 18-14 AWG Spade Single (0.8-2.0mm2) Terminal N/A Comb Bus USE MIDGET / 10X38 FUSE 75ºC OR 90ºC CU WIRE DO NOT OPEN UNDER LOAD R GB13539 Midget 10X38 48V 32A CHCCI-48 CHM & CHMI CHMI-48 CHCC & CHCCI (UL Applications) CHMDNX (IEC Applications) Product Design and Label Specifications 4GY1 UL4248-18 Rated: 1000Vdc, 30A 33kA RMS SYM Indication Min Voltage: 90V IEC: 60269-1 32A 1000Vdc 33kA 3.5W Degree of Protection IP20 MADE IN CHINA Series: CHPV R Wire Range Conductor No. of TorqueType Conductors 18-14 AWG 20 in-lbs (0.8-2.0mm2) Single 2.3 Nm 18-16 AWG 25 in-lbs (0.8-1.3mm2) Solid, Dual 2.8 Nm 14-10 AWG Stranded (2.0-5.2mm2) 12-10 AWG (3.3-5.2mm2) 8-4 AWG Stranded, 30 in-lbs (8.3-21.1mm2) Fine 3.4 Nm Stranded 18-14 AWG Spade Single (0.8-2.0mm2) Terminal N/A Comb Bus USE PHOTOVOLTAIC 10X38 FUSE 75ºC OR 90ºC CU WIRE DO NOT OPEN UNDER LOAD GB13539 IEC: 60269-2 Degree of Protection IP20 SOLID LINK 690V-32A MADE IN CHINA Series: CHM Wire Range Conductor No. of TorqueType Conductors 18-12 AWG 20 in-lbs

10 AWG Single

(5.0mm2) Solid, 25 in-lbs 18-16 AWG Stranded 2.8 Nm (0.8-1.3mm2) 14-10 AWG Dual (0.8-5.0mm2) 8-4 AWG Stranded, (8.4-21.1mm2) Fine 30 in-lbs Stranded Single 3.4 Nm 18-14 AWG Spade (0.8-2.0mm2) Terminal N/A Comb Bus 75ºC OR 90ºC CU WIRE DO NOT OPEN UNDER LOAD Wire Range Conductor No. of TorqueType Conductors 18-14 AWG 20 in-lbs (0.8-2.0mm2) Single 2.3 Nm 18-16 AWG 25 in-lbs (0.8-1.3mm2) Solid, Dual 2.8 Nm 14-10 AWG Stranded (2.0-5.2mm2) 12-10 AWG (3.3-5.2mm2) 8-4 AWG Stranded, 30 in-lbs (8.3-21.1mm2) Fine 3.4 Nm Stranded 18-14 AWG Spade Single (0.8-2.0mm2) Terminal N/A Comb Bus USE MIDGET / 10X38 FUSE 75ºC OR 90ºC CU WIRE DO NOT OPEN UNDER LOAD Rated: 600V, 30A 50/60Hz 200kA RMS SYM 3W Indication Min Voltage: 90V IEC: 60269-2 32A 690Vac 120kA 3W Degree of Protection IP20 Series: CHM MADE IN CHINA R GB13539

Remote Fuse Monitoring Accessory CH-PLC Specifications:

• Power Input: 24Vdc / 5mA
• Sensing Voltage: 600V/30mA
• Output Signals: Digital 0Vdc (Low), 24Vdc (High) - 0Vdc Low – Fuse is good - 24Vdc High – Fuse has opened When the fuse opens, the output signal is sent high and will remain high until the unit is reset
• Rated Impulse Voltage: 8kV
• Local Indication: Two distinct LEDs indicate unit power (green) and open fuse (red). Upon the replacement of the fuse, the actuation of the reset switch will reset the open fuse LED
• Flammability Rating: UL 94V0 Wiring:
• For power, signal and ground connections use 22-24AWG (0.25mm2) 300V rated wire Emissions and Immunity Testing:
• Electrostatic Discharge IEC 61000-4-2
• Electrical Fast Transient/Burst IEC 6100-4-4
• Surge Immunity IEC61000-4-5 Packaging:
• The CH-PLC is packaged individually
• A single unit monitors up to three phases
• Package includes 0.11” (2.8mm) quick connects for power, signal and ground connections Minimum Circuit Voltage:
• Minimum circuit voltage required across the CH holder is 100Vac for the remote indication device to operate Installation Technique:
• Mounts on the left side of the fuse holder and mechanically interlocks with the fuse holder switch handle with hardware provided IP20 Rating: Yes Environmental Data:
• Storage and Operating Temperature: -20°C to 75°C Agency Information:
• UL 508
• cULus to CSA Standard 22.2 No.14 PLC Programming:
• The CH-PLC signal line is designed to provide a digital input to a PLC I/O card.
• Programmable Logic Control program must be written to properly interpret the input signal to the PLC.
• The PLC program should check for consecutive high signals before taking action on a critical process. De-energize all circuits before installing or removing any CH-PLC devices and follow all prescribed safety procedures. Make it Simple with Cooper Bussmann resettable three-phase remote fuse monitor that integrates with a Programmable Logic Controller (PLC) or other monitoring and control equipment.

Comb-Bus Bar Specifications and Selection Guide Features and Benefits

• Easily distribute power in single-phase or three-phase configurations
• Flexible cut-to-length solutions without compromising on the product’s finger-safe
• 100kA SCCR (Short Circuit Current Rating) when protected by a 200A Class J fuse
• Single-phase bus bars rated to 1000Vdc and 100A in end-fed configuration (200A for center-fed configuration)
• Three-phase bus bars rated to 600Vac/dc and 100A in end-fed configuration (200A for center-fed configuration)
• Power feed terminals for single-phase and three-phase service Specifications Agency Information: UL508, File E195399 Pitch: 17.8mm SCCR: 10kA (default) 100kA (with upstream Class J 200A fuses) Max Current: 100A (power feed from end; 200A (power feed from center) Max Voltage: 600Vac/dc (three phase) 1000Vdc/600Vac (single phase) Part Number Description BB1P100M3 Single-phase 1000Vdc busbar, 100A, 3 pins, assembled endcap BB1P100M6 Single-phase 1000Vdc busbar, 100A, 6 pins, assembled endcap BB1P100M9 Single-phase 1000Vdc busbar, 100A, 9 pins, assembled endcap BB1P100M12 Single-phase 1000Vdc busbar, 100A, 12 pins, assembled endcap BB1P100M15 Single-phase 1000Vdc busbar, 100A, 15 pins, assembled endcap BB1P100M57 Single-phase 1000Vdc cuttable busbar, 100A, 57 pins, without endcap BB3P100M6 Three-phase 600V busbar, 100A, 6 pins, assembled endcap BB3P100M9 Three-phase 600V busbar, 100A, 9 pins, assembled endcap BB3P100M12 Three-phase 600V busbar, 100A, 12 pins, assembled endcap BB3P100M15 Three-phase 600V busbar, 100A, 15 pins, assembled endcap BB3P100M57 Three-phase 600V cuttable busbar, 100A, 57 pins, without endcap ECAP1P Single-phase busbar endcap ECAPMP Three-phase busbar endcap PWR35MM 35mm2 feeder terminal for three-phase busbar (115A, 1000Vac/dc) FSCVR Spare contact safety protection covers PWR1PLP Single-phase low-profile feeder terminal (115A, 1000Vac/dc) PWR50MM 50mm2 direct feed terminal (1000Vac/dc) Selection Guide

Comb-bus Bar Features and Installation Guide Typical Dimensional Data Three-phase Single-phase ECAP1P ECAPMP FSCVR PWR1PLP PWR35MM PWR50MM Typical Installation Example Power Feed Terminals Comb-Bus Bar Modular Fuse Holders

CH Series Modular Fuse Holder Specifications Catalog Numbers Max No. of Without With* Voltage 17.5mm Indication Indication Size & Current IEC UL Phase Configuration Modules Wire Range Maximum Torque CH081D CH081DI • 1-pole 1 1-16mm 2 (18-8 AWG) 2.5 N•m (22LB-In) CH081DNX - • 1 Neutral Pole 1 CH081DNS CH081DNSI • 1-pole + Neutral 1 1-10mm 2 (18-8 AWG) 2.0 N•m (17.5LB-In) CH081DN CH081DNI CH08 IEC • 1-pole + Neutral 2 CH082D CH082DI 8x32 400Vac • 2-pole 2 CH083D CH083DI 25A • 3-pole 3 1-16mm 2 (18-8 AWG) 2.5 N•m (22LB-In) CH083DNS CH083DNSI • 3-pole + Neutral 3 CH083DN CH083DNI • 3-pole + Neutral 4 CH084D CH084DI • 4-pole 4 CHM1DU CHM1DIU • * 1-pole 1 CHM2DU CHM2DIU UL • * 2-pole 2 CHM3DU CHM3DIU CHM 600V/30A; • * 3-pole 3 CHM4DU CHM4DIU 10X38 IEC • * 4-pole 4 CHM1DNU CHM1DNIU and 690V/32A • * 1-pole + Neutral 2 CHM3DNU CHM3DNIU Midget • * 3-pole + Neutral 4 1-21mm 2 (18-4 AWG) 3.4 N•m (30LB-In) UL 48Vdc/30A; – CHM1DI-48U IEC • * 1-pole 1 48Vdc/32A CHM1DNXU – IEC 690V32A • 1-pole + Neutral 2 CHPV1U CHPV1IU CHPV UL & IEC; • ††† 1-pole 1 CHPV2U CHPV2IU 1000Vdc/30A • ††† 2-pole 2 CHCC1DU CHCC1DIU 1-pole 1 CHCC2DU CHCC2DIU CHCC UL 2-pole 2 1-21mm 2 (18-4 AWG) 3.4 N•m (30LB-In) CHCC3DU CHCC3DIU Class CC 600V/30A 3-pole 3 CHCC1DI-48U – UL 48Vdc/30A 1-pole 1 CH141D CH141DI • 1-pole 1.5 CH141DMS - UL • 1-pole + Microswitch 1.5 CH141DNX - 600Vac/dc • 1 Neutral Pole 1.5 CH141DN CH141DNI 40A • 1-pole + Neutral 3 CH142D CH142DI CH14 (5 Watt) • † 2-pole 3 2.5-16mm 2 (14-6 AWG) 3.0 N•m (26LB-In) CH143D CH143DI 14x51 IEC • † 3-pole 4.5 CH143DMS - 690Vac, • 3-pole + Microswitch 4.5 CH143DN CH143DNI 50A • 3-pole + Neutral 6 CH143DNMS - • 3-pole + Neutral + Microswitch 6 CH144D CH144DI • 4-pole 6 CH221D Not • † 1-pole 2 CH221DMS Available • 1-pole + Microswitch 2 CH221DNX with UL • 1 Neutral Pole 2 CH221DN local 600Vac/dc, • 1-pole + Neutral 4 CH222D neon CH22 100A • † 2-pole 4 2.5-50mm 2 (14-1 AWG) 4.0 N•m (35LB-In) CH223D indication 22x58 (9.5 Watt) • † 3-pole 6 CH223DMS (remote IEC • 3-pole + Microswitch 6 CH223DN microswitch 690Vac, • † 3-pole + Neutral 8 CH223DNMS only) 125A • 3-pole + Neutral + Microswitch 8 CH224D • 4-pole 8 Class J Neon easyID™ Indication Indication CH30J1 CH30J1I CH30J UL/CSA †† 1-pole — 1-50mm 2 (18-1 AWG) 1-8 AWG 4.0 N•m (35LB-In) CH30J2 CH30J2I 30A 600Vac †† 2-pole — 10-18 AWG 2.7N•m (24LB-IN) CH30J3 CH30J3I Class J †† 3-pole — CH60J1 CH60J1I CH60J UL/CSA †† 1-pole — 1-50mm 2 (18-1 AWG) 1-8 AWG 4.0 N•m (35LB-In) CH60J2 CH60J2I 60A 600Vac †† 2-pole — 10-18 AWG 2.7N•m (24LB-In) CH60J3 CH60J3I Class J †† 3-pole — † UL Recognized (cURus) †† UL LIsted (cULus) ††† UL Recognized, Standard 4248-18, CSA For further details see Data Sheets 2053 (CH08, CHM, CHCC, CH14 AND CH22) and 2144 (CHJ Class J) *90V miminum required for illumination ***12V mininum required for illumination 8x32 IEC 14x51 IEC 22x58 IECPV UL IEC Class J 30A * UL Recognized, CSA ** UL Listed, CSA

Widest Range of Fuse Holders Available CUBEFuse™ Series IEC Series CH Series JTN 600 Series Optima® Series Modular Fuse Holders Series Class CC and Midget Series Covers SAMI™ Series Open Block Series Panel Mount Series Bolt-Down Series In-line Series Knife Blade Series Military Series

Reorder # 3185 1111-2.5M Printed in USA Your Authorized Cooper Bussmann Distributor is: Customer Assistance Customer Satisfaction Team Available to answer questions regarding Cooper Bussmann products & services Monday-Friday,

• Toll-free phone: 855-287-7626 (855-BUSSMANN)
• Toll-free fax: 800-544-2570
• E-mail: busscustsat@cooperindustries.com Emergency and After-Hours Orders Next flight out or will call shipment for time-critical needs. Customers pay only standard product price, rush freight charges, & modest emergency service fee. Place these orders through the Customer Satisfaction Team during regular business hours. For after-hours, contact:
• After hours 314-995-1342 C 3 – the Enhanced, Online Cooper Customer Center Provides real time product availability, net pricing, order status & shipment tracking across six Cooper divisions: B-Line, Bussmann, Crouse-Hinds, Lighting, Power Systems & Wiring Devices. Call 877-995-5955 for log-in assistance. Available at:
• www.cooperc3.com Application Engineering Technical assistance is available to all customers. Staffed by degreed electrical engineers, this application support is available Monday-Friday,
• Toll-free phone: 855-287-7626 (855-BUSSMANN)
• Fax: 636-527-1607
• E-mail: fusetech@cooperindustries.com
• Live Chat: www.cooperbussmann.com Online Resources Visit www.cooperbussmann.com for the following resources:
• Product search & cross-reference
• Product & technical materials
• Solutions centers for information on topical issues including arc-flash, selective coordination & short-circuit current rating
• Technical tools, like our arc-flash calculator
• Where to purchase Cooper Bussmann product Services Cooper Bussmann Services team provides engineering expertise in electrical system reviews, electrical safety training & component testing for Agency compliance. Contact:
• Phone: 636-207-3294
• E-mail: services@cooperindustries.com Cooper Industries plc 600 Travis, Ste. 5600 Houston, TX 77002-1001 P: 713-209-8400 www.cooperindustries.com Cooper Bussmann ® St. Louis, MO 63178 636-394-2877 www.cooperbussmann.com