CH5857 PENTAIR | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
DISTRIBUTOR ASSEMBLY INSTRUCTIONS USED ON DST 5685, 11663, 11665, 11892, 12604, 12606, 13569, 14248 BOTTOM MOUNT HUB AND LATERAL SYSTEM HIGH FLOW FLANGED COMPOSITE TANKS (42", 48", 63") DIAMETER TANKS STEP 2 Assemble Hub, as shown, and insert assembly into flange opening. STEP 1 Exploded view of Hub Components. STEP 3 After assembly is inside the tank, rotate the assembly 90°. Hold the Hub assembly with one hand, as shown, and assemble laterals by inserting and twisting clockwise. Note: Be sure lateral ends are tight. STEP 5 Hold Hub assembly with one hand and attach laterals as described in (step 3). STEP 4 While holding Hub and lateral assembly No. 1, attach Hub assembly No. 2 with pipe attached and go to (step 5). CALIFORNIA PROPOSITION 65 WARNING WARNING: This product contains chemicals known to the State of California to cause cancer or birth defects or other reproductive harm.
5730 NORTH GLEN PARK ROAD, MILWAUKEE, WI 53209
All Pentair trademarks and logos are owned by Pentair, Inc. or its affiliates. All other registered and unregistered trademarks and logos are the property of their respective owners. Because we are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice. Pentair is an equal opportunity employer. CH5857 REV B FE16 © 2016 Pentair Residential Filtration, LLC All Rights Reserved. STEP 7 Using 1/2" wrenches, tighten 5/16" x 2-1/2" long bolts alternately, as shown, until the flanges are flush with each other and seal is obtained. STEP 9 Use length of 3" PVC pipe (longer than tank length), slip on 3" PVC female adaptor (do not bond). This fixture is used for ease of assembly. (Furnished by customer) STEP 11 Install laterals one at a time through bottom opening. Insert laterals into Hub and lock into place by turning clockwise. Note: Be sure lateral ends are tight. STEP 10 The Hub Assembly is threaded on to the female adaptor of the assembly fixture and inserted into top opening. Allow to rest on side wall of tank. (As shown) STEP 6 After all laterals are assembled, hold the assembly, as shown, and thread on the flanged adaptor. Note: Be sure o-ring is attached and seated properly to flanged adapter. Note: Optional means of assembly, see steps L9, L10, L11. STEP 8 Assemble as shown. For Structural Product Warranties visit: Structural para las garantías de los productos visite: Pour Structural garanties produit visitez le site : waterpurification.pentair.com