CG0201MLA-5.5MH

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

Features

■ Miniature 0201 package ■ Fast response time to ESD strikes (<1 ns) ■ Bidirectional protection ■ Low clamping voltage ■ Low leakage current ■ RoHS compliant*

Applications

■ Smart phones ■ Tablets ■ Handheld devices ■ Embedded components ■ Scanners ■ Notebooks ChipGuard® MLA Series µVaristor ESD Clamp Protector *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifi cations are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specifi c applications. *RoHS COMPLIANT

Description

Electrical Characteristics @ 25 °C (unless otherwise noted) Model Vrms (V) VDC (V) VN Min. (V) VN Max. (V) VC (V) ITM (Max.) (A) WTM (Max.) (J) CP (pF) Typ. <10 µA 1 mA DC 1 A @ 8/20 µs @ 8/20 µs 10/1000 µs @ 1 MHz CG0201MLA-5.5MH 4 5.5 8 14 28 — — 32 Bourns® ChipGuard® MLA Series μVaristor ESD Clamp Protectors are based on multilayer metal oxide varistor technology. Bidirectional ESD protection is provided in a miniature 0201 package, making it one of the smallest protectors available on the market today. The series is ideally suited for space-constrained applications where circuit board space is at a premium. Device SymbolGeneral Characteristics How to Order CG 0201 MLA - 5.5 x H ChipGuard® Product Designator Package Designator 0201 = 0201 Package Technology MLA = Multilayer Varistor Operating Voltage 5.5 = 5.5 V Tolerance M = 20 % Tape & Reel Packaging H = 15,000 pcs. per reel Asia-Pacifi c: Tel: +886-2 2562-4117 • Fax: +886-2 2562-4116 EMEA: Tel: +36 88 520 390 • Fax: +36 88 520 211 The Americas: Tel: +1-951 781-5500 • Fax: +1-951 781-5700 www.bourns.com Environmental Characteristics Characteristic Specifi cation Test Condition Bias Humidity ΔVn/Vn ≤ 10 % 90 % RH, 40 °C, Working Voltage, 1000 Hours Thermal Shock -40 °C to +85 °C, 30 Minute Cycle, 5 Cycles Total Load Test Working Voltage, 85 °C, 1000 Hours

Specifi cations are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specifi c applications. ChipGuard® MLA Series µVaristor ESD Clamp Protector Product Dimensions DIMENSIONS: MM (INCHES) Recommended Pad Layout Solder Refl ow Recommendations CAUTION:

• Rapid heating and cooling in excess of stated maximum rates will easily damage this product.
• Locating heating can also damage product.
• Do not thermally shock product in excess of 100 °C.
• Product can be repaired using a 30 W or less solder gun/iron. Tip temperature maximum is 280 °C for less than 3 seconds.
• Do not touch the component directly with the soldering gun/iron.
• Excess soldering volumes can damage the body of the product. A Stage 1 Preheat Ambient to Preheating 3 °C / s max. Ramp Temperature B Stage 2 Preheat Preheat min./max. 150 °C to 200 °C Temperature Range 60 s to 180 s C Stage 3 Preheat Max. Time Above 217 °C to Main Heating Stated Temperature 60 s to 150 s D Main Heating Max. Time Within 5 °C 255 °C of Peak Temperature 20 s to 40 s (260 °C) E Cool Down Rate from Peak 6 °C / s max. Temperature 0.60 ± 0.05 (.024 ± .002) TOP VIEW SIDE VIEW 0.30 ± 0.05 (.012 ± .002) 0.30 ± 0.05 (.012 ± .002) 0.20 ± 0.10 (.008 ± .004) 0.30 ± 0.05 (.012 ± .002) 0.30 ± 0.05 (.012 ± .002) 0.25 ± 0.05 (.010 ± .002) 0.25 ± 0.05 (.010 ± .002) Construction TP TP CRITICAL ZONE TLTO TP TL RAMP-UP PREHEAT RAMP-DOWN TSmax TSmin Temperature (°C) t 25 °C TO PEAK Time (seconds) TL TS

Specifi cations are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specifi c applications. ChipGuard® MLA Series µVaristor ESD Clamp Protector Packaging Dimensions 2.0 ± 0.5 (.079 ± .020) 178 ± 2.0 (7.008 ± .079) 9.0 ± 0.5 (.354 ± .020) 13.0 ± 1.0 (.512 ± .039) 13.0 ± 0.5 (.512 ± .020) 62.0 ± 1.5 (2.441 ± .059) 21.0 ± 0.8 (.827 ± .031) DIMENSIONS: MM (INCHES) REV. A 07/14 8.0 ± 0.1 (.315 ± .004) 1.75 ± 0.05 (.069 ± .002) 3.5 ± 0.05 (.138 ± 0.002) 0.42 ± 0.02 (.017 ± .0008) 0.70 ± 0.02 (.028 ± .0008) 0.36 ± 0.02 (.014 ± .0008) 2.0 ± 0.05 (.079 ± .002) 1.55 ± 0.05 (.061 ± .002) DIA. 2.0 ± 0.05 (.079 ± .002) 4.0 ± 0.10 (.157 ± .004)