CFP050-2R0 TDK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

(1/2) 003-01 / 20051203 / ea399_cf.fm

  • All specifications are subject to change without notice. DC to DC Converters Distributed Power Supplies for Systems, Insulation Type CF Series CFP10W/CFR15W/CFT30W Types

FEATURES

  • This is an insulated onboard type product delivering among the best efficiency in the industry. This product delivers an efficiency of 91% (30W products) owing to our unique synchronous rectification circuitry.
  • This is an SMD onboard type, offering the lowest height profiles in the industry. By optimizing mounting methods, we have been able to achieve a thickness of only 4.0mm (10W).
  • Wide operating temperature range from –40 to +85°C with natu- ral air cooling (No derating).
  • Wide input voltage range (DC.36 to 75V)
  • Parallel operation is possible.
  • Remote ON-OFF function.
  • Various protective functions(output overvoltage protection, output overcurrent protection and output undervoltage protection)
  • Alarm signal output function.
  • It is lead-free compatible.
  • It is a product conforming to RoHS directive. PRODUCT IDENTIFICATION (1) Series name (CFP: 10W, CFR: 15W, CFT: 30W type) (2) Rated output voltage (3) Rated output current PART NUMBERS AND RATINGS SPECIFICATIONS AND STANDARDS ∗1 Please note that the maximum output voltage will vary depending on the output voltage. Provisions for derating due to the ambient temperature are not required(100% at +85°C). ∗2 Recovery can be achieved by re-applying input or by operating the on/off control on the remote (after an interval of about 1 sec.). Conformity to RoHS Directive CFP 033 – 3R0 (1) (2) (3) Output voltage (V) 10W Type 15W Type 30W Type Current(A) Part No. Current(A) Part No. Current(A) Part No. CFP050-2R0 CFR050-3R0 3.3 CFP033-3R0 4.5 CFR033-4R5 CFT033-09R0 2.5 CFP025-3R0 4.5 CFR025-4R5 1.8 CFP018-3R0 4.5 CFR018-4R5 1.5 5.2 CFR015-5R2 Type CFP10W CFR15W CFT30W Input voltage Edc V 36 to 60[Continuation]/ 75[Transient 10ms] 36 to 60[Continuation]/ 75[Transient 10ms] 36 to 60[Continuation]/ 75[Transient 10ms] Output voltage Edc V 3.3 Maximum output power∗1 W Efficiency 88typ.[3.3V output] 89typ.[3.3V output] 91typ.[3.3V output] Ripple noise Ep-p mV 50max. 50max. 50max. Start up time ms 50typ. 50typ. 50typ. Overvoltage protection∗2 Yes(Output voltage shut-down type) Overcurrent protection∗2 Yes(Output voltage shut-down type) Alarm output Yes Overheat protection No Remote ON-OFF Yes Remote sensing No Parallel operation Possible Output voltage external variable function No Safety standards UL60950, CSA C22.2 No.60950(C-UL) External dimensions mm 4.5×42.4×45[H×W×L] Weight g 8typ. 8typ. 17typ. Mounting method Mounted from the terminal side (soldered).
  • Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.

(2/2) 003-01 / 20051203 / ea399_cf.fm

  • All specifications are subject to change without notice. COMMON SPECIFICATIONS SHAPES AND DIMENSIONS 10W/CFP TYPE 15W/CFR TYPE 30W/CFT TYPE TERMINAL FUNCTIONS 30W TYPE Temperature range Operating(°C) –40 to +85[Ambient temperature of the power supply] Storage(°C) –40 to +85[Ambient temperature of the power supply] Humidity range Operating(%)RH 20 to 85[Maximum wet-bulb temperature: 38°C, without dewing] Storage(%)RH 10 to 95[Maximum wet-bulb temperature: 38°C, without dewing] Cooling conditions Natural cooling[0.2m/s] Vibration Number of vibration: 10 to 55Hz, Sweep time: 1s, All amplitude 1.52mmp-p, Vibration time: X, Y, Z directions, each 2h Shock Acceleration 100G, Half sine wave, Pulse Duration: 6ms, each directions 3 times, total 18 times Withstand voltage Input terminal to output terminal: DC.1.5kV[1min, cutout current 2mA] ALM Alarm output terminal NC RC Remote ON-OFF terminal NC PO All startup or all off. –Vin DC input terminal(–) –Vin DC input terminal(–) –Vin DC input terminal(–) +Vin DC input terminal(+) +Vin DC input terminal(+) +Vin DC input terminal(+) +Vout DC output terminal(+) +Vout DC output terminal(+) +Vout DC output terminal(+) +Vout DC output terminal(+) –Vout DC output terminal(–) –Vout DC output terminal(–) –Vout DC output terminal(–) –Vout DC output terminal(–) –Vout DC output terminal(–) –Vout DC output terminal(–) 39.9±0.6 37.3±0.5 Pin direction Coplanarity 0.1max. Diameter of the attachment surface ø10min. Dimensions in mm 4.3max. (4.0typ.) NC NC NC NC 2.54±0.2 Errors are not accumulated 27.2±0.5 2.17±0.5 2.17±0.5 Part No. Lot No. Marking Dimensions in mm 39.9±0.6 37.3±0.5 Pin direction Coplanarity 0.1max. 4.3max. (4.0typ.) NC NC NC NC 2.54±0.2 Errors are not accumulated 31.2±0.5 4.17±0.5 4.17±0.5 Diameter of the attachment surface ø10min. Part No. Lot No. Marking TERMINAL FUNCTIONS 10W/15W TYPES +Vout DC output terminal(+) +Vout DC output terminal(+) +Vout DC output terminal(+) –Vout DC output terminal(–) –Vout DC output terminal(–) ALM Alarm output terminal RC Remote ON-OFF terminal PO All startup or all off NC +Vin DC input terminal(+) +Vin DC input terminal(+) –Vin DC input terminal(–) –Vin DC input terminal(–) Dimensions in mm NC NC NC NC NC NC NC NC 42.4±0.5 45.0±0.6 Pin direction Coplanarity 0.1max. Diameter of the attachment surface ø10 Attachment surface has no unevenness (1.3) 5.08±0.2 5.08±0.2 2.54±0.2 Errors are not accumulated 45max. 4.5max. (4.2typ.) 10.16±0.2