CFP-DO-400 NI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Digital Output Modules for Compact FieldPoint Overview The National Instruments cFP-DO-4xx devices are versatile digital output modules for Compact FieldPoint that you can use to control digital signals ranging from 5 to 30 V. These modules are commonly used to control indicator lights, external relays, and CMOS and TTL devices. All the modules include onboard diagnostics to ensure trouble-free installation and maintenance. Digital Output Modules The cFP-DO-4xx modules provide built-in module-to-module isolation to protect your Compact FieldPoint system and controller or communication interface from high voltage levels. All the digital output modules use a common ground plane for the digital output channels. The cFP-DO-400 and cFP-DO-401 sourcing digital output modules are capable of providing up to 2 A per channel, with a maximum power limit across the entire module as explained in the specifications section. The cFP-DO-403 sinking digital output module is capable of providing up to 2 A per channel, with a maximum power limit across the entire module as explained in the specifications section. The cFP-DO-410 sourcing digital output module is capable of providing up to 1 A per channel. It also features an electronic fuse that prevents damage to the module due to short circuits or other overcurrent situations. The fuses automatically reset when the output returns to a normal state. An LED indicates an overcurrent fault. All the channels on the cFP-DO-4xx modules feature LEDs that indicate the output state of each channel. The modules feature an all-channel update rate of 20 kHz. Overall data throughput depends on software loop speeds and network speeds. Isolation The cFP-DO-4xx modules feature optical bank isolation with 2,300 Vrms of breakdown isolation. These Compact FieldPoint modules do not have channel-to-channel isolation.

  • 8 or 16 digital outputs
  • 5 VDC
  • 12 VDC
  • 24 VDC
  • Fused outputs for short circuit protection cFP-DO-410
  • 2,300 V rms bank isolation for transient overvoltage protection
  • Hot-swappable with autoconfiguration
  • -40 to 70 °C operating range NI cFP-DO-400, NI cFP-DO-401, NI cFP-DO-403, NI cFP-DO-410 Module Output Channels Output Ranges Output Current Rating (see Specifications for More Details) Compatibility Examples Electronically Fused Outputs All Channel Update Rate cFP-DO-400 8 10 to 30 VDC, sourcing 1.5 A 12 and 24 VDC – 20 KHz cFP-DO-401 16 10 to 30 VDC, sourcing 1.5 A 12 and 24 VDC – 20 KHz cFP-DO-403 16 5 to 30 VDC, sinking 2 A 5, 12, and 24 VDC – 20 KHz cFP-DO-410 8 5 to 30 VDC, sourcing 1 A 5, 12, and 24 VDC 20 KHz

Compact FieldPoint modules include a built-in power distribution bus that offers multiple power connections on the module. A field-wired power supply connected to the voltage (V) and common (C) terminals is internally connected to a power distribution bus that provides additional breakout terminals for voltage supply (VSUP) and common (COM). These terminals deliver a convenient way to distribute power to field devices that require external power. Load COM C VOUT VSUP V

2 A Max

1.5 A Max

Digital Output Modules for Compact FieldPoint BUY ONLINE at ni.com or CALL 800 813 3693 (U.S.) Load Load VOUT COM C VOUT VSUP V Figure 1. Wiring Schematics for Digital Output Modules

Ordering Information

Recommended Compact FieldPoint System Products BUY NOW! For complete product specifications, pricing, and accessory information, call 800 813 3693 (U.S.) or go to ni.com/info and enter cfpdo400, cfpdo401, cfpdo403, and/or cfpdo410.

Typical for -40 to 70 °C unless otherwise noted. Digital Output Channels Number of output channels Maximum output current per channel at 10 to 30 V range Maximum output current on all channels

12 A2 at 60 to 70 °C

Maximum output current at 5 to 10 V range All channels, cFP-DO-400 Output delay time Protection Flyback diode to COM for inductive loads Leakage, overcurrent condition stored in local network module 1The sum of the squares of the output currents on every channel must be less than or equal to this value. Power Requirements Power from network module Isolation Voltage Physical Characteristics LED indicators Dimensions (including terminal base) 10.7 by 10.9 by 9.1 cm (4.2 by 4.3 by 3.6 in.) Environment Shock and Vibration Operating vibration, random Operating vibration, sinusoidal Operating shock 18 shocks at 6 orientations; 30 g, 11 ms half sine, 18 shocks at 6 orientations Safety and Compliance Safety This product is designed to meet the requirements of the following standards of safety for electrical equipment for measurement, control, and laboratory use:

  • IEC 61010-1, EN 61010-1
  • UL 61010-1, CSA 61010-1 Note: For UL and other safety certifications, refer to the product label or visit ni.com/certification, search by model number or product line, and click the appropriate link in the Certification column. Electromagnetic Compatibility This product is designed to meet the requirements of the following standards of EMC for electrical equipment for measurement, control, and laboratory use:
  • EN 61326 EMC requirements; Minimum Immunity
  • EN 55011 Emissions; Group 1, Class A
  • CE, C-Tick, ICES, and FCC Part 15 Emissions; Class A Note: For EMC compliance, operate this device according to product documentation. CE Compliance This product meets the essential requirements of applicable European Directives, as amended for CE marking, as follows:
  • 2006/95/EC; Low-Voltage Directive (safety)
  • 2004/108/EC; Electromagnetic Compatibility Directive (EMC) Note: Refer to the Declaration of Conformity (DoC) for this product for any additional regulatory compliance information. To obtain the DoC for this product, visit ni.com/certification, search by model number or product line, and click the appropriate link in the Certification column. Waste Electrical and Electronic Equipment (WEEE) EU Customers: At the end of their life cycle, all products must be sent to a WEEE recycling center. For more information about WEEE recycling centers and National Instruments WEEE initiatives, visit ni.com/environment/weee.htm. Digital Output Modules for Compact FieldPoint BUY ONLINE at ni.com or CALL 800 813 3693 (U.S.)

NI has the services and support to meet your needs around the globe and through the application life cycle – from planning and development through deployment and ongoing maintenance. We offer services and service levels to meet customer requirements in research, design, validation, and manufacturing. Visit ni.com/services. Training and Certification NI training is the fastest, most certain route to productivity with our products. NI training can shorten your learning curve, save development time, and reduce maintenance costs over the application life cycle. We schedule instructor-led courses in cities worldwide, or we can hold a course at your facility. We also offer a professional certification program that identifies individuals who have high levels of skill and knowledge on using NI products. Visit ni.com/training. Professional Services Our NI Professional Services team is composed of NI applications and systems engineers and a worldwide National Instruments Alliance Partner program of more than 600 independent consultants and integrators. Services range from start-up assistance to turnkey system integration. Visit ni.com/alliance. OEM Support We offer design-in consulting and product integration assistance if you want to use our products for OEM applications. For information about special pricing and services for OEM customers, visit ni.com/oem. Local Sales and Technical Support In offices worldwide, our staff is local to the country, giving you access to engineers who speak your language. NI delivers industry-leading technical support through online knowledge bases, our applications engineers, and access to 14,000 measurement and automation professionals within NI Developer Exchange forums. Find immediate answers to your questions at ni.com/support. We also offer service programs that provide automatic upgrades to your application development environment and higher levels of technical support. Visit ni.com/ssp. Hardware Services NI Factory Installation Services NI Factory Installation Services (FIS) is the fastest and easiest way to use your PXI or PXI/SCXI combination systems right out of the box. Trained NI technicians install the software and hardware and configure the system to your specifications. NI extends the standard warranty by one year on hardware components (controllers, chassis, modules) purchased with FIS. To use FIS, simply configure your system online with ni.com/pxiadvisor. Calibration Services NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. We provide manual calibration procedures, services to recalibrate your products, and automated calibration software specifically designed for use by metrology laboratories. Visit ni.com/calibration. Repair and Extended Warranty NI provides complete repair services for our products. Express repair and advance replacement services are also available. We offer extended warranties to help you meet project life-cycle requirements. Visit ni.com/services. SERVICE NEEDS M AINTAIN PLAN DEVELOPDEPLOY ©2008 National Instruments Corporation. All rights reserved. FieldPoint, National Instruments, National Instruments Alliance Partner, NI, ni.com, NI Developer Suite, and SCXI are trademarks of National Instr uments. Other pr oduct and company names listed are trademarks or trade names of their respective companies. A National Instruments Alliance Partner is a business entity independent fr om NI and has no agency , partnership, or joint-ventur e relationship with NI. National Instruments • info@ni.com ni.com • 800 813 3693 *351564B-01* 351564B-01 2008-9484-161-101-D