DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

FENG-JUI TECHNOLOGY CO., LTD FERRITE CHIP INDUCTOR-RoHS Your Perfect Inductor Rev.1501 CFL252018CF TYPE

  • FEATURE 1. Wire wound SMD inductors, power line used 2. Highly accurate dimensions and reliable
  • Applications 1. Hard Disk drives, and other electronic equipment
  • Shape and Dimension ●Schematics and Land Patterns(mm)
  • Specification D i m e n s i o n i n m / m TYPE A B C D E F G K H I Note1. Measurement frequency of Inductance value : at electrical characteristics Note2. Measurement ambient temperature of L, DCR and IDC : at 25℃ Note3. IDC : This indicates the value of current when the inductances is 10% lower than its initial Note4. Inductance tolerance: J: ±5% ;K: ±10% ; M: ±20% Note5. Ordering Code (P/N) 1.TYPE NAME : CFL252018CF 2.INDUCTANCE VALUE : 100(10uH) 3.INDUCTANCE TOLERANCE : □(see Note4) G I H TERMINAL K

FENG-JUI TECHNOLOGY CO., LTD FERRITE CHIP INDUCTOR-RoHS Your Perfect Inductor Rev.1501 P/N L(μH) /MHz Inductance Tolerance Q Typ. /MHz SRF (MHz) Min RDC (Ω)Max IDC (mA)Max CFL252018CF-R47□ 0.47 / 25 J，K 35 / 25 460 0.20 1800 CFL252018CF-R82□ 0.82 / 25 J，K 35 / 25 360 0.35 1200 CFL252018CF-1R2□ 1.2 / 7.9 J，K 32 / 7.9 290 0.25 1100 CFL252018CF-1R5□ 1.5 / 7.9 J，K 32 / 7.9 230 0.42 1000 CFL252018CF-1R8□ 1.8 / 7.9 J，K 27 / 7.9 180 0.45 800 CFL252018CF-2R2□ 2.2 / 7.9 J，K 27 / 7.9 140 0.50 900 CFL252018CF-3R3□ 3.3 / 7.9 J，K 27 / 7.9 125 0.60 900 CFL252018CF-3R9□ 3.9 / 7.9 J，K 27 / 7.9 100 0.80 800 CFL252018CF-4R7□ 4.7 / 7.9 J，K 27 / 7.9 90 0.90 720 CFL252018CF-6R8□ 6.8 / 7.9 J，K 27 / 7.9 60 1.05 670 CFL252018CF-8R2□ 8.2 / 7.9 J，K 25 / 7.9 55 1.20 640 CFL252018CF-100□ 10 / 2.5 J，K 23 / 2.5 55 1.55 540 CFL252018CF-150□ 15 / 2.5 J，K 23 / 2.5 36 2.38 460 CFL252018CF-220□ 22 / 2.5 J，K 23 / 2.5 29 2.92 400 CFL252018CF-330□ 33 / 2.5 J，K 23 / 2.5 21 4.10 300 CFL252018CF-470□ 47 / 2.5 J，K 23 / 2.5 17 7.80 220

FENG-JUI TECHNOLOGY CO., LTD FERRITE CHIP INDUCTOR-RoHS Your Perfect Inductor Rev.1501 GENERAL CHARACTERISTICS 1. Operating temperature range: -40 TO + 105 (I ncludes temperature when the coil is heated)℃ 2. External appearance: On visual inspection, the coil has no external defects. 3. Terminal strength: After soldering. Between copper plat e and terminals of coil. Push in two directions of X.Y withstanding at below conditions. Terminal should not peel off. (refer to figure at right) 0.5kg 4. Insulating resistance: Over 100M Ω at 100V D.C. between coil and core. 5. Dielectric strength: No dielectric breakdow n at 100V D.C. for 1 minute between coil and core. 6. Temperature characteristics: I nductance coefficient (0~2,000)x10-6/ (℃ -25~+80 ).℃ 7. Humidity characteristics(Moisture Resistance): Indu ctance deviation within ±5%, after 96 hours in 90~95% relative humidity at 40 ±2 and 1 hour drying under normal condition.℃ 8. Vibration resistance: Inductance deviation within ±5%, af ter vibration for 1 hour. In each of three orientations at sweep vibration (10~55~10 Hz) with 1.5mm P-P amplitudes. 9. Shock resistance: Inductance deviation within ±5 %, after being dropped once with 981m/s2 (100G) shock attitude upon a rubber block method shock testing machine, in three different orientations. 10. Resistance to Soldering Heat: 260 , 10 seconds(See attached recommend reflow)℃ 11. Storage environment: Storage condition: Temperature Range: 10 ~ 35 (Genera℃℃ lly: 21 ~ 31 ) , ℃℃ Humidity Range: 50% ~ 80% RH (Generally: 65% ~ 75%) ; Transportation condition: Temperature Range: -35 ~ 85 , Humidity Range: 50% ~ 95% RH℃℃ 12. Use components within 12 months. If 12 months or more have elapsed, check solderability before use. 13. Reflow profile recommend: 260 ℃ 230 ℃ 300 250 200 150 100 T( ℃ ) T(s 300240180120600 Lead-free heat endurance test 245℃ Peak 230℃ 170±10℃,60-120 S 300 250 200 150 100 T(℃) T(s) 300240180120600 Lead-free the recommended reflow condition