CFITCRIMPV4 ALPHAWIRE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Part Number: FIT-CRIMP Issue: 4 Page 1 of 2 Pages Issue Date: 10/28/2008 Effective Date: 11/28/2008 This technical specification outlines the requirements for the products described herein. Deviations from this specification are not permitted without the written authorization of the Alpha Wire Engineering Department. All finished products will be inspected to this specification and noncompliance or unauthorized deviations will be cause for rejection and return of product. All information contained herein is confidential. It’s use is restricted to authorized Alpha Wire Company personnel or authorized vendors of the Alpha Wire Company. Under no circumstances shall this document be duplicated in any form or shown to/discussed with unauthorized personnel without the expressed written consent of the Alpha Wire Engineering Department. A. Construction 1) Barrel Splice Material: Seamless Crimp Barrel 2) Insulation a) Material: Heat Shrinkable Nylon b) Sealant: Polyamide Based Hot Melt Adhesive c) Crimp Splice Base Metal: Tin plated copper Plating Tin plated Mil-T-10727, Type 1 B. Industry Approvals 1 ) U L Y e s 2 ) c ( U L ) Y e s 3) Other Mil-T-10727 Type 1 C. Physical Properties 1) Operating Temperature -55c to +125C 2) Insulation Shrink Ratio 2:1, Approx. 3) Color Code FIT-CRIMP-1: Red FIT-CRIMP-2: Blue F I T - C R I M P - 3 : Y e l l o w D. Finished Product Requirements 1) Dimensions See Table 1, Figure 1 2) Shelf Life 25 years 3) EU Directive 2002/95/EC(RoHS): All materials used in the manufacture and packaging of this part must meet the requirement of EU Directive 2002/95/EU regarding the restriction of use of certain hazardous substances in electrical and electronic equipment. 4) California Proposition 65: T he outer surface materials of this product must be in accordance with CA Proposition 65 and contain no greater than 300 ppm of lead and meet all other chemical constraints as outlined in CA Proposition 65. E. Other 1) Packaging 25 pc., 100 pc., 500 pc. Packages
Part Number: FIT-CRIMP Issue: 4 Page 2 of 2 Pages Issue Date: 10/28/2008 Effective Date: 11/28/2008 This technical specification outlines the requirements for the products described herein. Deviations from this specification are not permitted without the written authorization of the Alpha Wire Engineering Department. All finished products will be inspected to this specification and noncompliance or unauthorized deviations will be cause for rejection and return of product. All information contained herein is confidential. It’s use is restricted to authorized Alpha Wire Company personnel or authorized vendors of the Alpha Wire Company. Under no circumstances shall this document be duplicated in any form or shown to/discussed with unauthorized personnel without the expressed written consent of the Alpha Wire Engineering Department. Table 1 Alpha P/N Conductor Range AWG L1 +/-0.060 L2 Min øA Min As Received øA Max After Recovery øB Min Wire Strip Length Nom Figure 2