CFB600W-110S48

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 2

Technical content

600 WATT

FEATURES

• 600W Isolated Output * Efficiency to 88% * Regulated Outputs * Isolated Remote On/Off * Over Temperature Protection * Over Voltage/Current Protection * Continuous Short Circuit Protection * Full-Brick Size Meet Industry Standard * Meet EN50155 with External Circuits * Shock & Vibration Meet EN50155 (EN61373) * Meet UL60950-1 2 nd (Basic Insulation) * Fire & Smoke Meet EN45545-2 OUTPUT CURRENT INPUT CURRENT MODEL NUMBER INPUT VOLTAGE OUTPUT VOLTAGE MIN. MAX. NO LOAD FULL LOAD % EFF. (3) CAPACITOR LOAD MAX. CFB600W-110S12 43-160 VDC 12 VDC 0 mA 50 A 25 mA 6.3 A 87 10000µF CFB600W-110S24 43-160 VDC 24 VDC 0 mA 25 A 25 mA 6.2 A 88 10000µF CFB600W-110S28 43-160 VDC 28 VDC 0 mA 21.4 A 25 mA 6.2 A 88 10000µF CFB600W-110S48 43-160 VDC 48 VDC 0 mA 12.5 A 25 mA 6.2 A 88 10000µF NOTE: 1. Nominal Input Voltage 110 VDC. 2. The Output Terminal Required a Minimum Capacitor 470uF to Maintain Specified Regulation. 3. Measure at Nominal Input Voltage.

All Specifications Typical At Nominal Line, Full Load, and 25 ℃ Unless Otherwise Noted INPUT SPECIFICATIONS: GENRAL SPECIFICATIONS: ohm min. OUTPUT SPECIFICATIONS: Operating Case Temperature ………………………………… -40 ℃ to 100℃ nd (Basic insulation) 28V ………………. 100 mV RMS, 280mV pk-pk max. EMC (note5) ……………… Meet EN50155(EN50121-3-2) with External Filter Over Voltage Protection trip Range , % Vo nom. ……………… 115-140% NOTE: Current Limit ………………………….……… 105-140% Nominal Output 1. Measured from high line to low line. Auxiliary Output Voltage/Current …….…………… 10±3Vdc/20mA max. 2. Measured from full load to zero load. Load Share Accuracy ………………… ±10% at 50% to 100% Full Load 3. Output ripple and noise measured with 10uF tantalum capacitor and Start up time ……………………………………………………… 160 ms typ. 1uF ceramic capacitor across output.(48Vo: 10uF aluminum capacitor and 1.0uF ceramic capacitors) 4. An external input capacitor 220uF for all models are recommended to reduce input ripple voltage. 5. For information about EN50155 and RIA12, refer to application note. 6. Trim-up: connect a resistor between trim pin and +sense. Trim-down: connect a resistor between trim pin and –sense. 7. Suffix “-C0” to the model number with threaded mounting holes (M3x0 .5). 8. Standard model is negative logic, suffix “P” to the model number with positive logic. (refer application note) CASE FB All Dimensions in Inches[mm] Pin PIN CONNECTION 0.400[10.16] 0.900[22.86] 1.400[35.56] 0.199[5.05] 4.20[106.7] Mounting Inserts 2.40[61.0] 0.50[12.7] 0.22[5.5] 4.60[116.8] CONNECTION PIN NUMBER 5~7 8~10 -V Input +V Input -On/Off +On/Off +V Output -V Output -Sense +Sense TRIM PC IOC AUX 0.100[2.54] 0.400[10.16] 0.300[7.62] 0.150[3.81] 0.201[5.10] 0.150[3.81] 0.150[3.81] 0.150[3.81] 0.150[3.81] 0.150[3.81] 0.301[7.64] 2.00[50.8] 0.050[1.27] -Vin +Vin ON/OFF