CFA-10084

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

CFA-10084 ePaper Adapter Board Datasheet Release Date 2018-07-26 Crystalfontz America, Inc.

12412 East Saltese Avenue

Spokane Valley, WA 99216-0357 Phone: 888-206-9720 Fax: 509-892-1203 Email: support@crystalfontz.com URL: www.crystalfontz.com

Crystalfontz CFA-10084 ePaper Adapter Board www.crystalfontz.com Datasheet Release Date 2018-07-26 Page | 2 TABLE OF CONTENTS

Crystalfontz CFA-10084 ePaper Adapter Board www.crystalfontz.com Datasheet Release Date 2018-07-26 Page | 3 1. General Information Datasheet Revision History Datasheet Release: 2018-07-26 Datasheet for the CFA-10084 ePaper Adapter Board Product Change Notifications You can check for or subscribe to Part Change Notices for this part on our website. Variations Slight variations between lots are normal (e.g., contrast, color, or intensity). Volatility This display module has volatile memory. Disclaimer Certain applications using Crystalfontz America, Inc. products may involve potential risks of death, personal injury, or severe property or environmental damage (“Critical Applications”). CRYSTALFONTZ AMERICA, INC. PRODUCTS ARE NOT DESIGNED, INTENDED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT APPLICATIONS, DEVICES OR SYSTEMS OR OTHER CRITICAL APPLICATIONS. Inclusion of Crystalfontz America, Inc. products in such applications is understood to be fully at the risk of the customer. In order to minimize risks associated with customer applications, adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazard. Please contact us if you have any questions concerning potential risk applications. Crystalfontz America, Inc. assumes no liability for applications assistance, customer product design, software performance, or infringements of patents or services described herein. Nor does Crystalfontz America, Inc. warrant or represent that any license, either express or implied, is granted under any patent right, copyright, or other intellectual property right of Crystalfontz America, Inc. covering or relating to any combination, machine, or process in which our products or services might be or are used. All specifications in datasheets on our website are, to the best of our knowledge, accurate but not guaranteed. Corrections to specifications are made as any inaccuracies are discovered. Company and product names mentioned in this publication are trademarks or registered trademarks of their respective owners. Copyright © 2018 by Crystalfontz America, Inc.,12412 East Saltese Avenue, Spokane Valley, WA 99216 U.S.A.

Crystalfontz CFA-10084 ePaper Adapter Board www.crystalfontz.com Datasheet Release Date 2018-07-26 Page | 4 2. Introduction This ePaper adapter board enables quick and easy setup for the ePaper display modules. It's compatible with our entire line of ePaper display modules. All of the components are on one side of the board for easy attachment to the back of any ePaper display. This backpack style adapter board minimizes the amount of space needed for your design.

• Overall dimensions (mm): 30 (W) x 26 (H)
• Weight: 2.4 grams
• Pin Count: 8 3. Absolute Maximum Ratings Parameter Symbol Min Max Unit Supply Voltages for Logic VDD +3.3 5.5 V Operating Temperature TOP -20 70 °C Storage Temperature TSTG -30 80 °C Humidity Range (non-condensing) RH 10 90 % Notes: (1) Functional operation should be restricted to the limits in the ePaper datasheet used in conjunction with this adapter board. (2) These are stress ratings only. Extended exposure to the absolute maximum ratings listed above may affect device reliability or cause permanent damage. 4. Connection Information The ZIF-end of the ePaper display should be placed into the ZIF connector on the adapter board so that when the components of the adapter board are facing up, the display is also facing up, see example below.

Crystalfontz CFA-10084 ePaper Adapter Board www.crystalfontz.com Datasheet Release Date 2018-07-26 Page | 5 5. Jumper Locations and Functions Each ePaper display module has its own datasheet on the product’s webpage. Please refer to the datasheet for which value to use between RESE and GND: 0.47Ω or 3Ω. Note: When you order one of our ePaper bundle kits, the jumper will be configured correctly based on the ePaper display in the bundle. 5.1. RESE Jumper o Shorted: the value from RESE to GND is 0.47Ω o Open: the value from RESE to GND it 3Ω (default) 5.2. BS1 Jumpers (SPI) o When both conditions are true: shorted HI and open LO = 3-wire SPI mode o When both conditions are true: shorted LO and open HI = 4-wire SPI mode (default)

CFA-10084: ePaper Adapter Board 24-pin PCB-10084CFA-10084 Schematic Copyright © 2018 Crystalfontz America, Inc. PRODUCT REVISION: PCB NUMBER: Page : / PRODUCT NAME: PCB REVISION: 1 1 Crystalfontz America, Inc. REMARKSDATEENGINEERREV Initial Creation2018-04-040v0 BAC Ind val, C12 val, JP_0P47 open, CN FPC 2018-05-170v1 BAC --- - --- - --- - Scope GroundESD border discharge VOLTAGE GENERATION 10v ~ 17v -17v ~ -10v -4v ~ 0v ~1.8v ~3.3v ~7.5v ~ -20v ~ 22v ~ 42v ~ -20v ~ 22v ~ -20v ~ 22v Close for 0.47 ohm Open for 3 ohm (default) Low for 4-wire, 8-bit SPI High for 3-wire, 9-bit SPI Gate drive from controller. Current sense to controller. Swings 0 to ~ +22v Charges to ~ +22v Charges to ~ -20v Charges to ~ +42v The threshold appears to be ~200mv (200mv/3ohms = 67mA) for 3-Ohm units. (default, loaded) (DNP, optional) Holes for 0.1" through-hole header 0.1" low-profile SMT header Plating of ePaper FPC is gold (AU), therefore the contact plating of this connector should also be gold. Molex 0524352-471 for example. WEEE_TRASH_CAN_THING CFA_LOGO_FROM_DWGRFG 0603 ±1% 00191 GND DNP 01600 MBR0530 01600 MBR0530 01600 MBR0530 C31µF 25V 0603 X5R 00289 C41µF 25V 0603 X5R 00289 C51µF 25V 0603 X5R 00289 C61µF 25V 0603 X5R 00289 C81µF 25V 0603 X5R 00289 C101µF 25V 0603 X5R 00289 C11µF 50V 0603 X5R 16043 C21µF 50V 0603 X5R 16043 C71µF 50V 0603 X5R 16043 C91µF 50V 0603 X5R 16043 100K 0603 ±1% 00580 C1110uF 0805 16V X5R 01531 0.47 0603 ±1% 16055 2.55 0603 ±1% 16056 TP_TSCLTSCL TP_TSDATSDA JP_BS2L CLOSED LO JP_BS2HOPEN HI TP_P1P1 1PWR 2GND 3SCK 4MOSI 5CS 6D/C 7RST 8BUSY

16036 DNP

D G S 30v 0.063 ohms Micro3™/SOT-23 3.4A IRLML6346TRPBF 16060 C121µF 50V 0603 X5R 16043 JP_0P47OPEN 0.47 100uH Coilcraft LPS3015-104MRC 240mA 16067 3.4Ohms 1 NC

2 GDR

3 RESE

4 VGL

5 VGH

6 TSCL

7 TSDA

8 BS1

9 BUSY

10 RST

11 D/C

13 D0(SCK)

14 D1(MOSI)

15 VDDIO

16 VCI

17 VSS

18 VDD

19 VPP

20 VSH

21 PREVGH

22 VSL

23 PREVGL

24 VCOM

Mates to Crystafontz 24-pin CFAP Series ePaper DianWei 8.01A0.024200 16070 GND GND GND FG +3.3v+3.3v GND GND GND GND GND GNDGND GND GND GNDGND GND GND GND +3.3v GND GND +3.3v GND GND +3.3v +3.3v FG FG PREVGH PREVGL GDR PREVGH VCOM VSL VSH VGH VGL VPP VCC GDR BS1 D0(SCK) D1(MOSI) RESE RESE RST D/C CS BUSY PREVGL RESE_MID D0(SCK) D1(MOSI) CS RST D/C BUSY BS1 D0(SCK) D1(MOSI) CS RST D/C BUSY SW SWGL TSCL TSDA Example design for reference only.