CENT1120 SLPOWER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Specifications AC Input 90-264Vac, 47-63 Hz single phase MTBF > 100K hours (calculated, 25 °C at full load) Input Current 90VAC: 2A, 180VAC: 1.0A Hold -up Time 16.7 ms min. @ 110VAC Inrush Current Inrush Current Protection Provided Overvoltage Protection Latching Input Fuse Internal Primary Current Fuse Provided Overload Protection >120% of full rated load, Hiccup Mode Earth Leakage Current Input-GND: <3.5mA, Normal State Output-GND: <0.25mA, Normal State Short Circuit Protection Hiccup Mode, auto-recovery Efficiency 88% typical Overtemperature Protection Latching No Load Powe r <0.5W Output Voltage See chart Input Harmonics Meets IEC61000-3-2, class D Safety Standards IEC/EN/UL60950 Transient Response 5ms return to within 1%, 50% load step. 0.2A/sec slew rate. Maximum deviation is 5% Topology Two-Stage Conversion and Quasi-Resonant Flyback Line / Load Voltage Regulation Line: +/-2.0% max., Load: +/-5% max Isolation Input-Output: 3000VAC, Input-GND: 1500VAC, Output-GND: 500VDC Minimum Load Not required Operating Temperature 0° to 40°C with no derating Ripple and Noise 1% pk-pk max., 20MHz BW, differential mode Temperature Coefficient 0.3% per °C, maximum Turn -on Time 3 sec. maximum @ 115VAC Storage Temperature -20°C to +85 °C Case Material Black 94V-0 rated Polycarbonate Relative Humidity 5% to 95%, non-condensing Case Dimensions /Output Connections See chart and outline drawing Altitude 0 to 10,000 ft, operating; -500 to 40,000 ft, non-operating Model "A" = Original Configuration Product Family : "C" = Commercial/ITE/Industrial, "E" = External, "NT" = New Technology Output Power: "120" = 120 Watts # of Outputs "1" = Single Output "01" = Standard. "02" and higher indicates a modif ied model. Model Output Voltage: "09" = 9Vdc, "12" = 12Vdc, "24" = 24Vdc, etc. Input Connector: "F" = IEC320 C14 grounded, Other options available, see below Output Connector: "51" = 6 pin Molex. Other options available. Model Number Key VV 51 CENT 01 1 120 A F CENT1120 Universal 120 Watt Series ITE Switch-Mode Power Supply 3 Year Warranty

  • Universal Input 100Vac – 240Vac
  • Single Output Models up to 120W
  • Desktop Style/Non-vented case
  • Efficiency Level IV
  • Power Factor Correction
  • Certified to UL/ EN60950
  • IPX1 Rated Enclosure
  • Complies with EMI/RFI Regulations
  • Modified and Custom Designs Available

Model Number Output Volts Output Current (max) Max Watts Ripple (Vp-p max) CENT1120A0951F01 9V 9.00A 81W 90mV CENT1120A1251F01 12V 9.17 A 120W 120mV CENT1120A1551F01 15V 7.33 A 120W 150mV CENT1120A1851F01 18V 6.67 A 120W 180mV CENT1120A2451F01 24V 5.00 A 120W 240mV CENT1120A4851F01 48V 2.50 A 120W 480mV Note: Ripple and Noise is measured with 0.1 µF ceramic and 10 µF electrolytic capacitor in parallel, connected at the measurement point. Input Receptacle Output Connector (12V model) Output Connector (All other models) IEC320, C14 – Class I “#3” Connector is 2.5 mm barrel type, center (+) “#51” Connector is Molex 39-01-2060 or equivalent . Data Sheet © 2010 SL Power Electronics Corp. The i nformation and specifications contained herein are believed to be correct at the time of publication. Rev. 12-3-2010 However, SL Power accepts no responsibility for con sequences arising from reproduction errors or inacc uracies. Specifications are subject to change with out notice. Conducted Emissions EN55022 Class B Radiated Emissions EN55022 Class B, FCC Part 15, Class B. Static Discharge Immunity EN61000-4-2, 6kV Contact Discharge, 8kV air discharge Radiated RF Immunity EN61000-4-3, 3V/m. EFT/Burst Immunity EN61000-4-4, 2kV/5kHz.. Line Surge Immunity EN61000-4-5, 1kV differential, 2kV common-mode Conducted RF Immunity EN61000-4-6, 3Vrms Power Frequency Magnetic Field Immunity EN61000-4-8, 3A/m, performance criteria A Voltage Dip Immunity EN61000-4-11, 70% UT for 10mS, 40% UT for 100mS, <5% UT for 5000mS, performance criteria A, B Line Flicker EN61000-3-3 Line Frequency Harmonics EN61000-3-2, Class D CENT1120 Universal 120W Series ITE Switch-Mode Power Supply 3Year Warranty EMI/EMC Compliance 1800+/- 50mm (1000mm on 12V models) Outline Drawing (#51 connector shown) 167 (6.6”) (1.6”) (3.2”)