DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Specifications All Specifications are typical at nominal input, full load at 25C unless otherwise stated. AC Input 100-240Vac, +/-10%, 47-63 Hz, 1 MTBF 100,000 hours calculated Input Current 100 Vac: 2.2 A Hold-up Time 18 ms min. @ 115Vac, 60 ms min. @ 230 Vac Inrush Current 60A peak @ 264Vac, cold start Overload Protection Hiccup Mode Input Fuse 3.15A, 250V Internal Primary Current Fuse provided Short Circuit Protection Hiccup Mode Efficiency Meets International Efficiency Level V Topology Switching – Fixed Frequency Flyback Output Voltage See chart Safety and EMC Approvals EN/IEC/CSA/UL60950-1, 2nd Edition EMC: See chart Output Power See chart Dielectric Withstand Input-Output: 4,242Vdc Input-GND: 1,500Vac, Output-GND: 500Vdc Ripple and Noise 1% pk-pk max., 20MHz BW Operating Temperature 0 to 40C, no derating Line/Load Regulation Excluding Cord: Line: +/- 1%, Load: +/-5% Storage Temperature -30 to +85C Transient Response 500μs max., 50% load step, typical Relative Humidity 5% to 95%, non-condensing Minimum Load Not required Altitude 0 to 10,000 ft Case Material Black 94V0 Polycarbonate Output Connections Cable: 18 AWG, 1,500mm, 4 conductor Connector: #51, 6-pin Molex Case Dimensions 212.4mm x 67.4mm x 45mm, see outline drawing Weight 700g EMI/EMC Compliance Conducted Emissions FCC Part 15, Class B, EN55022 Class B, EN55024 Radiated Emissions FCC Part 15, Class B, EN55022 Class B, EN55024 Voltage Fluctuations EN61000-3-3, Line Flicker Static Discharge Immunity EN61000-4-2, 6kV Contact Discharge, 8kV air discharge Radiated RF Immunity EN61000-4-3, 3V/m. EFT/Burst Immunity EN61000-4-4, 2kV/5kHz.. Line Surge Immunity EN61000-4-5, 1kV differential, 2kV common-mode Conducted RF Immunity EN61000-4-6, 3Vrms Power Frequency Magnetic Field Immunity EN61000-4-8, 3A/m Voltage Dip Immunity EN61000-4-11 crit. A, 100Vac 60Hz, 40%/5 cycles with 70% full load. Line Frequency Harmonics EN61000-3-2, Class A CENB1121 Universal Input 120 Watt Series
- 100-240VAC Universal Input
- Meets EISA2007, CEC Efficiency Level V, EU (EC) No 278/2009 Phase II
- Desktop Style
- 12V to 24V Single Output Models, up to 120W
- Modified and Custom Designs Available
- Regulated Output with Low Ripple
- Impact-Resistant Polycarbonate Enclosure
- No Load Power Consumption <0.5W
- Meets UL/EN/IEC60950-1, 2nd Edition ITE Switch-Mode Power Supply 3 Year Warranty
Model "A" = Original Configuration Product Family : "C" = Industrial/ITE, "E" = External, "NB" = Model Series Designator Output Pow er: "150" = 150 Watts # of Outputs "1" = Single Output "01" = Standard. "02" and higher indicates a modified model. Model Output Voltage: "12" = 12Vdc, "15" = 15Vdc, etc. Input Connector: "F" = IEC320 C14 grounded. Other options available, see below . Output Connector: "51" = Molex 39-01-2060. Other options available. Model Number Key 12 51CENB 011 120 A F Input Connector Options DC Output Connector Output Connector Options Pinout Mating Connector Class I (grounded) Inlet: “F” = IEC60320 C14 Class II (ungrounded) Inlets: “N” = IEC60320 C8 “Q” = IEC60320 C18 “51” = 6 pin, Molex 39-01-2060 or equiv. Pins 1,4: +Vout Pins 3,6: -Vout Pins 2,4: NC Molex 39-01-3063 or equiv. Dimension is in mm. Data Sheet © 2013 SL Power Electronics Corp. The information and specifications contained herein are believed to be correct at the time of publication. Rev. 12-23-2013 However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice. Model Number Volts (V) Output Current (max) Max Watts Ripple (Vp-p max) CENB1121A1251F01 12 V 10.0 A 120 W 120mV CENB1121A1551F01 15 V 8.0 A 120 W 150mV CENB1121A1851F01 18 V 6.6 A 120 W 180mV CENB1121A2451F01 24 V 5.0 A 120 W 240mV Outline Drawing CENB1121 Universal Input 120 Watt Series ITE Switch-Mode Power Supply 3 Year Warranty 1200 ± 50 67.4 ± 0.5 212.4 ± 0.5 44.25 ± 1.0