DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Specifications All Specifications are typical at nominal input, full load at 25°C unless otherwise stated. AC Input 100-240VAC, -/-10%, 47-63 Hz, 1 ∅ MTBF >100,000 hours calculated Input Current 100VAC: 0.9A Hold-up Time 18 ms min. @ 115VAC, 60 msec @ 230VAC Inrush Current 60A peak, 264Vac, cold start Turn-on Time 2 seconds, max. Input Fuse 3.15A Internal Primary Current Fuse is provided Topology Switching – Fixed Frequency Flyback Efficiency Meets EISA2007, CEC Efficiency Level V, and EU(EC) No. 278/2009 Phase II requirements Overload Protection Hiccup Mode Output Voltage See chart Short Circuit Protection Hiccup Mode Output Power See chart EMC See chart below Ripple and Noise 1% pk-pk max., 20MHz BW Safety Standards EN/IEC/CSA/UL60950-1, 2nd Edition, LPS Line & Load Voltage Regulation Line: +/- 1%, Load: +/-5% Dielectric Withstand Input-Output: 4,242VDC, Input-GND: 1,500 Vac, Output-GND: 500Vdc Transient Response 500μs max., 50% load step, typical Operating Temperature 0° to 40°C, no derating Minimum Load Not required Storage Temperature -40° to +85°C Case Material: Black 94V0 Polycarbonate Relative Humidity 5% to 95%, non-condensing Case Dimensions: 95 x 54 x 31mm. See outline drawing Weight = 200g Altitude 0 to 10,000 ft Output Connector: 2.5mm barrel type (Ault #3) connector, center contact (+). Other options available Output Cable: 5V – 9V models:#18AWG (SPT-1), 1,500mm, 2 conductor 12V – 48V models: #18AWG (UL1185), 1,500mm, 2 conductor EMC Specifications Conducted Emissions EN55022 Class B, FCC Part 15, Class B. Radiated Emissions EN55022 Class B, FCC Part 15, Class B. Line Frequency Harmonics EN61000-3-2, Class A Voltage Fluctuations/Flicker EN61000-3-3 Static Discharge Immunity EN61000-4-2, 6kV Contact Discharge, 8kV air discharge Radiated RF Immunity EN61000-4-3, 3V/m. EFT/Burst Immunity EN61000-4-4, 2kV/5kHz. Line Surge Immunity EN61000-4-5, 1kV differential, 2kV common-mode Conducted RF Immunity EN61000-4-6, 3Vrms Power Frequency Magnetic Field Immunity EN61000-4-8, 3A/m Voltage Dip Immunity EN61000-4-11, Criteria B CENB1030 Universal 30 Watt Series ITE Switch-Mode Power Supply 3 Year Warranty

  • 100-240VAC Universal Input
  • Meets EISA2007, CEC Efficiency Level V, EU (EC) No 278/2009 Phase II
  • Certified to UL/EN60950-1, 2nd Edition
  • 5Vto 48V outputs, up to 32W
  • Modified and Custom Designs Available
  • Regulated Output with Low Ripple
  • Impact-Resistant Polycarbonate Enclosure
  • No load Power Consumption <0.3W
  • Limited Power Source
  • Desktop & Wall Plug Styles

Model Number Volts (V) Output Current (max) Max Watts Ripple (Vp-p max) CENB1030A0503F01 5 V 4.00 A 20.0 W 50 mV CENB1030A0703F01 7.5 V 3.00 A 22.5 W 75 mV CENB1030A0903F01 9 V 3.00 A 27.0 W 90 mV CENB1030A1203F01 12 V 2.50 A 30.0 W 120 mV CENB1030A1403F01 14 V 2.10 A 29.4 W 140 mV CENB1030A1503F01 15 V 2.00 A 30.0 W 150 mV CENB1030A1803F01 18 V 1.67 A 30.0 W 180 mV CENB1030A2403F01 24 V 1.33 A 31.9 W 240 mV CENB1030A4803F01 48 V 0.67 A 32.1 W 480 mV Notes: Part numbers above include #3 output connector and IEC320 C14 grounded input receptacle. See below for other options. Model "A" = Original Configuration Product Family : "C" = Commercial/ITE/Industrial, "E" = External, "NB" = Model Series Designator Output Pow er: "030" = 30 Watts # of Outputs "1" = Single Output "01" = Standard. "02" and higher indicates a modified model.Model Output Voltage: "05" = 5Vdc, "12" = 12Vdc, "24" = 24Vdc, etc. Input Connector: "F" = IEC320 C14 grounded, Other options available, see below Output Connector: "03" = 2.5mm Barrel Type Connector. Other options available, contact factory. Model Number Key VV 03CENB 011 030 A F IEC320 - C14 IEC320 - C18 IEC320 - C8 N. America N. America Europe United Australia Class I Class II Class II Japan Japan Kingdom Grounded Ungro unded "Shaver" Interchangable Fixed Fixed Fixed Fixed (F) (Q) (N) (C) (B) (M) (G) (H) Notes: Notes: 1. Ault #3 Connector, center contact (+). 2. Connector is Switchcraft 760 plug or equivalent. Mating connector is Switchcraft 712A or equivalent. 3. Other connector options are available. Contact your local SL Pow er Representative for details. Output Connector the receptacle chosen. The N. A. blade version (C) will be an interchangeable blade. 3. Blade Kit is available w hich will include one each of a EU, UK, and Australian blade. Kit part # 2. For Wall-Plug options, choose the applicable letter above and the unit w ill be fitted w ith is KT1027K. These can be used w ith the (C) version, to allow blades to be changed. The other options (B), (M), (G), and (H) w ill be fixed blades molded in the case. AC Input Receptacle Options Desktop 1. For desktop options, choose applicable letter above. Wall-Plug Desktop Style Wall-plug Style “C” Option Shown (with KT1027K interchangeable blade kit) Data Sheet © 2014 SL Power Electronics Corp. The information and specifications contained herein are believed to be correct at the time of publication. Rev. 9-22-14 However, SL Power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. Specifications are subject to change without notice. Outline Drawings ITE Switch Mode Power Supply 3 Year Warranty DATE CODE