CDP-2-122-75 MINI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits Product Overview The CDP-2-122-75+ is a 2-way power splitter featuring a flat, laser-marked, “Top-Hat” cover for faster pick and place manufacturing throughput. Installed as a single component with a small footprint (0.250” x 0.310”) and low height (0.133”), it utilizes square-core, all-welded construction to handle up to 1W RF power. The open-style case is aqueous washable and RoHS compliant. Feature Advantages Wide bandwidth at a low cost 5-1200 MHz bandwidth accomodates forward & return CATV transmission bands Low insertion loss, Excellent return loss Excellent VSWR (1.01-1.23 in/1.10-1.25 out) for low-loss performance in both directions Very good isolation 20-25 dB for consistent performance under changing loads Very good amplitude and phase unbalance 0.2 dB typ. amplitude unbalance and 3.0° typ. phase unbalance help reduce unwanted noise and harmonics CDP-2-122-75+ The Big Deal

  • High performance at a very low cost
  • Very small form size (0.250” x 0.310” x 0.133” high) CASE STYLE: TT1491-2

2 Way-0° 75Ω 5 to 1200 MHz

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits CDP-2-122-75+ Operating Temperature -40°C to 85°C Storage Temperature -55°C to 100°C Power Input (as a splitter) 1W max. Internal Dissipation 0.125W max. Outline Drawing Outline Dimensions ( )inch mm Electrical Schematic Suggested Layout, Tolerance to be within □.002 REV. C M151107 ED14964/1 CDP-2-122-75+ JC/CP/AM 160210 CASE STYLE: TT1491-2

Features

  • wideband, 5 to 1200 MHz
  • low insertion loss, 0.8 dB typ.
  • excellent matching return loss, 20 dB typ.
  • aqueous washable

Applications

  • DOCSIS® 3.1 Systems
  • cellular
  • VHF/UHF
  • communication systems
  • CATV Pin Connections SUM PORT 6 PORT 1 3 PORT 2 4 GROUND 1 NOT USED 2,5 EXT. RESISTOR 165Ω 3,4 Demo Board MCL P/N: TB-698+ Suggested PCB Layout (PL-385) Permanent damage may occur if any of these limits are exceeded. ABCDE FGH J K wt. Parameter Frequency (MHz) Min. Typ. Max. Unit Frequency Range 5 1200 MHz Insertion Loss Above 3.0 dB 5-50 — 0.4 0.8 dB50-600 — 0.6 1.0 600-1200 — 1.0 1.8 Isolation 5-50 20 24 — dB50-600 20 25 — 600-1000 1000-1200 Phase Unbalance 5-50 — 1.0 3.0 Degree50-600 — 1.0 3.0 600-1200 — 2.0 5.0 Amplitude Unbalance 5-50 — 0.2 0.5 dB50-600 — 0.2 0.4 600-1200 — 0.2 0.6 VSWR (Port S) 5-50 — 1.05 1.2 600-1200 — 1.25 1.3 VSWR (Port 1-2) 5-50 — 1.20 1.5 600-1200 — 1.10 1.45 Electrical Specifications at 25°C +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications top hat Available Tape and Reel at no extra cost Reel Size Devices/Reel 7” 20, 50, 100, 200 13” 500, 1000

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits Typical Performance Data Frequency (MHz) Total Loss1 (dB) Amplitude Unbalance (dB) Isolation (dB) Phase Unbalance (deg.) VSWR S VSWR VSWR S-1 S-2 CDP-2-122-75+ TOTAL LOSS 3.0 4.0 5.0 6.0 0 200 400 600 800 1000 1200 FREQUENCY (MHz) TOTAL LOSS (dB) S-1(dB) S-2(dB) CDP-2-122-75+ ISOLATION 0 200 400 600 800 1000 1200 FREQUENCY(MHz) ISOLATION (dB) CDP-2-122-75+ VSWR 1.0 1.1 1.2 1.3 0 200 400 600 800 1000 1200 FREQUENCY (MHz) VSWR #S-VSWR #1-VSWR #2-VSWR CDP-2-122-75+ 1. Total Loss = Insertion Loss + 3dB splitter loss.