DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Corcom Facility EMI Filters Product Guide Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric USA Cust. Svc.: 1-800-468-2023 equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. Corcom Prods: 1-847-680-7400 Catalog: 1654986 Issue Date: 11.2009 www.tycoelectronics.com www.corcom.com CDEUL Series CDEUL Series - Extended Range Buffer Networks (Inductive Input) Filter Cabinet
- Modified NEMA I, constructed of not less than #14 gauge CRS with galvanized bulkhead
- Blue epoxy finish to all non-conductive surfaces
- R.F. Radiation of the shielded (load) compartment greater than 100 dB from 14 kHz to 10 GHz
- Front cover access, dual cover design
- Filter inserts pre-wired to standoffs and lugs
- Lifting hooks and mounting tabs
- Legs for floor mount available (see page 24) Individual Filters
- Sealed components with welded and/or soldered seams
- Constructed of not less than #16 gauge steel with corrosion resistant plating
- Bleeder resistor to eliminate shock hazard provided
- HEMP Surge arrestors provided upon request‡
Electrical Characteristics
Voltage Drop: Less than 1% @ unity power factor Overload: 140% of rated current for 15 minutes Harmonic Distortion: Less than 2% @ full rated current Dielectric Withstanding Voltage: Per MIL-PRF-15733 and UL1283 D.C. Insulation Resistance: Per MIL-STD-202, Method 302 Terminal Strength: Per MIL-STD-202, Method 211, Condition E Temperature Rise: Per MIL-PRF-15733 and UL1283 R.F. Radiation: 100 dB minimum shielding effectiveness Insertion Loss: 100 dB from 14 kHz - 10 GHz per MIL-STD-220A, under load condition, using extended range buffer networks over the frequency range of 14 kHZ - 20 MHz Applicable Publications: MIL-PRF-15733 — Filters, radio interference MIL-STD-202 — T est methods for Components MIL-STD-220A — T est method of Insertion Loss MIL-STD-188-125 — HEMP MIL-STD-285 — T est method for Shielding Effectiveness NFPA 70-1987 — National Electric Code 486A - 1983 — Wire Connectors and Lug UL1283 — Underwriter Laboratories 6P16 † How to Order: † 60 Hz Models Only Shown with optional legs CDEUL 4 01000 A6 -S -L Voltage/Frequency A6 - 120/208V, 60Hz B6 - 277/480V, 60Hz A4 - 120/208V, 400Hz Legs Surge Arrestors (optional) Current Rating # of Filters Series Examples: CDEUL401000A6-S-L = 4, 1000A CDEUL, 120/280V filters in cabinet with surge arrestors and legs CDEUL300030B6 = 3, 30A CDEUL, 277/480V filters in cabinet Note 1: Surge Arrestor for A6/A4* Models: V251BA60 Surge Arrestor for B6 Models: V481BA60 Note 2: Current configuration listed as 5 digits with leading zeros ‡ Intended for HEMP applications <150A. For filters rated >225A refer to the new TECUL Series on page 14.
Corcom Facility EMI Filters Product Guide Catalog: 1654986 Issue Date: 11.2009 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric USA Cust. Svc.: 1-800-468-2023 equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. Corcom Prods: 1-847-680-7400 www.tycoelectronics.com www.corcom.com CDEUL Series - ERBN (Inductive Input) (continued) A E C D B Removable Individual Phase Filters Mounting Brackets Area for Conduit Penetration Removable Cover Removable Cover RF Gasket Current Dimensions Weight (Amps) A B C D E (Pounds/KG) Current Dimensions Weight (Amps) A B C D E (Pounds/KG) Max. Operating Voltage A6: 120/208V, 60 Hz B6: 277 /480V, 60 Hz A4*: 120/208V, 400 Hz *400Hz filters available upon request. Will require external power factor correction coil. Please contact Tyco Electronics Application Engineering 847-573-6517. Corcom Facility EMI Filters — NEMA Cabinet Style For optional legs, refer to page 24 Recommended torque for fasteners on removable cover: 25 in. lb. ± 3 in. lb.