CDBKB455KCAY09-R0

Murata Manufacturing Co...

Ceramic Discriminators for Communications Equipment

Manufacturer: Murata Manufacturing Co...

Document: 78 Pages / 1Mb

Request Quote Download Datasheet Read online HTML view

More from Murata Manufacturing Co... Browse C parts

Online Datasheet

Read CDBKB455KCAY09-R0 online.

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
PDF pages: 78

Technical content

Cat.No.P05E-16 Ceramic Filters (CERAFILr)/ Ceramic Discriminators for Communications Equipment !Note P05E.pdf Nov.24,2011 Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

s All the products in this catalog comply with EU RoHS. s EU RoHS is "the European Directive 2011/65/EU on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment." s For more details, please refer to our website 'Murata's Approach for EU RoHS' (http://www.murata.com/info/rohs.html). !Note P05E.pdf Nov.24,2011 Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

!Note P05E.pdf Nov.24,2011 Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering. CERAFILr and "CERAFIL" in this catalog are the trademarks of Murata Manufacturing Co., Ltd.CONTENTS Part Numbering 2 Products Guide 4 CERAFILr kHz SMD Type SFPKA Series 5 CERAFILr kHz SMD Type CFUKG Series 7 CERAFILr kHz SMD Type CFUKG_X Series 9 CERAFILr kHz SMD Type CFUKF Series 11 CERAFILr kHz SMD Type CFWKA Series 13 CERAFILr kHz SMD Type CFWKA_Y Series 15 kHz SMD Type CERAFILr Notice 17 CERAFILr MHz SMD Type SFECF10M7 Series 21 CERAFILr MHz SMD Type SFSCE10M7 Series 23 MHz SMD Type CERAFILr Notice 25 SMD Type CERAFILr Standard Land Pattern Dimensions 31 kHz SMD Type CERAFILr Packaging 32 MHz SMD Type CERAFILr Packaging 34 CERAFILr Plastic Case General Use CFULA Series 35 CERAFILr Plastic Case General Use CFWLA Series 37 CERAFILr Plastic Case Miniaturized Type CFULB Series 39 CERAFILr Plastic Case Miniaturized Type CFWLB Series 41 CERAFILr Plastic Case Group Delay Flat Type CFULA_Y Series 43 CERAFILr Plastic Case Group Delay Flat Type CFWLA_Y Series 45 CERAFILr Plastic Case Group Delay Flat Type Miniaturized Type CFULB_Y Series 47 CERAFILr Plastic Case Group Delay Flat Type CFWLB_Y Series 49 Plastic Case Type CERAFILr Minimum Quantity/Notice 51 kHz Type Ceramic Discriminators 52 MHz Type Ceramic Discriminators 65 Ceramic Discriminators Notice 70 Ceramic Discriminators Standard Land Pattern Dimensions/Packaging 74

4 Elements Area Expansion mode

6 Elements Area Expansion mode

2 Elements Thickness Expansion mode

2 Elements Thickness Shear mode

Embossed taping is applied to chip type. SFE/S/J series are expressed by four-digit alphanumerics. SFE/S/J series are expressed by two-digit alphanumerics. With standard type, y is omitted.

!Note P05E.pdf Nov.24,2011 Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering. e CB w S r 10M7 t GF u -R0 y 001 q CD(Part Number) qProduct ID wOscillation Ceramic Discriminators for IF (MHz) CD Discriminators Product ID tProduct Specification GF Code Product Specification With non-standard products, an alphanumerics indicating "Individual Specification" is added between "yIC" and "uPackaging." eStructure/Size Embossed Taping ø=180mm yIC 001 Code IC Applicable IC Control Code uPackaging -R0 Code Packaging Thickness Shear modeS Code Oscillation Chip TypeCp Code Structure/Size p is expressed "A" or subsequent code, which indicates the size. Two-digit alphanumerics express type, center frequency, rank, others rNominal Center Frequency Expressed by four-digit alphanumerics. The unit is in hertz (MHz). Decimal point is expressed by capital letter "M." y A e LB w B r 450K t C u X i o -B0 q CD(Part Number) qProduct ID Ceramic Discriminators for IF (kHz) CD Ceramic Discriminators Quadrature Detection Product ID tDetection C Code Detection Embossed taping is applied to chip type. With non-standard products, one letter indicating "Individual Specification" is added between "iApplicable IC" and "oPackage Specification code." p is "A" or subsequent code, which indicates the size. It varies depending on vibration mode and number of elements. Standard Application with coil yApplication A L Code Application Low-capacitance High-capacitance uElement Type X Y Code Element Type Applicable IC Control code iIC Code IC Bulk Embossed Taping ø=180mm Embossed Taping ø=330mm oPackaging -B0 -R0 -R1 Code Packaging Area Expansion mode wOscillating B Code Oscillating Chip Type Lead Type eStructure/Size Cp/Kp Lp Code Structure/Size rNominal Center Frequency Expressed by four-digit alphanumerics. The unit is in hertz (Hz). Capital letter "K" following three figures expresses the unit of "kHz."

Applications

6dB Bandwidth (kHz) min. General Use Attenuation (dB) min. oSMD Type (kHz) High Selectivity Series (Plastic Case Type) Narrow Bandwidth GDT Flat Type Miniature Series (Plastic Case Type) GDT Flat Type Miniature Series (Plastic Case Type) GDT Flat Type High Selectivity SMD Series (Plastic Case Type) High Selectivity SMD Series (Plastic Case Type) SFPKA455KM (4 Elements) CFUKG455KM (4 Elements) CFUKG455KMX (4 Elements) CFUKF455KM (4 Elements) CFWKA450KBFY (6 Elements) CFWKA450KM (6 Elements) oLead Type (kHz) 27 (G to H; 25) 27 (G; 25) 27 (G to H; 25) 25 (D to E; 23) A ±17.5 o B ±15 o o C ±12.5 o D ±10 o o o o E ±7.5 o o o o o F o o o o G ±4.5 o o o o H o o J K ±1.5 L Type Series 6dB Bandwidth (kHz) min. General Use Attenuation (dB) min. Within 455±80 or ±100kHz Within 455±80 or ±100kHz High Selectivity Low Profile Series High Selectivity Miniature Series GDT Flat Type Series GDT Flat Type Miniature Series CFULA455KM (4 Elements) CFWLA455KM (6 Elements) CFULB455KM (4 Elements) CFWLB455KM (6 Elements) CFULA455KMY (4 Elements) CFWLA455KMY (6 Elements) CFULB455KMY (4 Elements) CFWLB455KMY (6 Elements) 35 (H, J; 60) 35 (H, J; 55) 25 (D to G; 23) 25 (D to G; 23) 40 (F; 35) A ±17.5 o o B ±15 o o o o o o o o C ±12.5 o o o o o o o o D ±10 o o o o o o o o E ±7.5 o o o o o o o o F o o o o o o o o G ±4.5 o o o o o o o o H o o o o J o o o K ±1.5 L (G; 25) (H; 35) (G; 25) (H, J; 35) Products Guide

Ceramic Filters (CERAFILr) for Communications Equipment CERAFILr kHz SMD Type SFPKA Series The SFPKA series is comprised of small, high-performance, economical, thin (5.0mm) ﬁ lters consisting of 4 ceramic elements. Their innovative construction is perfect for shrinking mobile communication products such as cordless phones, pagers and transceivers. c Features 1. The ﬁ lters are mountable by automatic placers. 2. The ﬁ lters can be reﬂ ow soldered and withstand washing. 3. They are slim, at only 5.0mm maximum thickness. 4. The bandwidth ranges from D to H. 5. Operating temperature range: -20 to +80 (°C) Storage temperature range: -40 to +85 (°C) 7.5±0.3 5.0 max. 3.0±0.3 8.4 max. 2.0±0.3 1.5±0.3 7.0±0.3 0.9±0.1 MARKING EIAJ CODE 2.0±0.3 (1) (2) (3) 1.5±0.3 1.6±0.3 Connection (1): Input (2): Ground (3): Output (in mm) Part Number Center Frequency (fo) (kHz) 6dB Bandwidth (kHz) Stop Bandwidth (kHz) Stop Band Attenuation (dB) Insertion Loss (dB) Ripple (dB) Input/Output Impedance (ohm) SFPKA455KD4A-R1 455 ±1.5kHz fn±10.0 min. fn±20.0 max. [within 40dB] 27 min. [within fn±100kHz] 4.0 max. [at minimum loss point] 2.0 max. [within fn±7kHz] 1500 SFPKA455KE4A-R1 455 ±1.5kHz fn±7.5 min. fn±15.0 max. [within 40dB] 27 min. [within fn±100kHz] 6.0 max. [at minimum loss point] 1.5 max. [within fn±5kHz] 1500 SFPKA455KF4A-R1 455 ±1.5kHz fn±6.0 min. fn±12.5 max. [within 40dB] 27 min. [within fn±100kHz] 6.0 max. [at minimum loss point] 1.5 max. [within fn±4kHz] 1500 SFPKA455KG1A-R1 455 ±1.0kHz fn±4.5 min. fn±10.0 max. [within 40dB] 25 min. [within fn±100kHz] 6.0 max. [at minimum loss point] 1.5 max. [within fn±3kHz] 1500 SFPKA455KH1A-R1 455 ±1.0kHz fn±3.0 min. fn±9.0 max. [within 40dB] 35 min. [within fn±100kHz] 6.0 max. [at minimum loss point] 1.5 max. [within fn±2kHz] 2000 Center frequency (fo) deﬁ ned by the center of 6dB bandwidth. (fn) means nominal center frequency 455kHz. For safety purposes, connect the output of ﬁ lters to the IF ampliﬁ er through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic ﬁ lters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. Rg+R1=R2=Input/Output Impedance E1: S.S.G. Output Voltage Rg S.S.G. 0dBm (1) (2) (3) R2 E2 RF Voltmeter (1): Input (2): Ground (3): Output c Test Circuit P05E.pdf Nov.24,2011 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

Attenuation (dB) G.D.T. (μsec.) 430 455 480 Frequency (kHz) 240 280 320 360 400 120 160 200 c Frequency Characteristics SFPKA455KE4A-R1 100 Attenuation (dB) 200 Frequency (kHz) 300 400 500 600 700 800 900 1000 SFPKA455KE4A-R1 P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

Ceramic Filters (CERAFILr) for Communications Equipment CERAFILr kHz SMD Type CFUKG Series The CFUKG series is comprised of small, high-performance, thin (4.0mm) ﬁ lters consisting of 4 ceramic elements. Their innovative construction is perfect for shrinking mobile communication products such as pocket pagers and cellular phones. c Features 1. The ﬁ lters are mountable by automatic placers. 2. The ﬁ lters can be reﬂ ow soldered and withstand washing. 3. They are slim, at only 4.0mm maximum thickness, and have a small mounting area (7.5x6.0mm) enabling ﬂ exible PCB design. 4. The bandwidth ranges from D to G. 5. Operating temperature range: -20 to +80 (°C) Storage temperature range: -40 to +85 (°C) 1.5±0.3 3.0±0.3 1.0±0.1 4.0±0.3 6.5±0.3 7.5 max. C0.5 1.2±0.1 4.0 max. 1.0±0.1 (in mm) Connection (1): Input (2): Output (3): Ground 1.0±0.3 1.0±0.3 1.5±0.36.0±0.3 (1) (2) (3) MARKING EIAJ CODE Part Number Center Frequency (fo) (kHz) 6dB Bandwidth (kHz) Stop Bandwidth (kHz) Stop Band Attenuation (dB) Insertion Loss (dB) Ripple (dB) Input/Output Impedance (ohm) CFUKG455KD4A-R0 455 ±1.5kHz fn±10.0 min. fn±20.0 max. [within 40dB] 27 min. [within fn±100kHz] 4.0 max. [at minimum loss point] 2.0 max. [within fn±7kHz] 1500 CFUKG455KE4A-R0 455 ±1.5kHz fn±7.5 min. fn±15.0 max. [within 40dB] 27 min. [within fn±100kHz] 6.0 max. [at minimum loss point] 1.5 max. [within fn±5kHz] 1500 CFUKG455KF4A-R0 455 ±1.5kHz fn±6.0 min. fn±12.5 max. [within 40dB] 27 min. [within fn±100kHz] 6.0 max. [at minimum loss point] 1.5 max. [within fn±4kHz] 1500 CFUKG455KG1A-R0 455 ±1.0kHz fn±4.5 min. fn±10.0 max. [within 40dB] 25 min. [within fn±100kHz] 6.0 max. [at minimum loss point] 1.5 max. [within fn±3kHz] 1500 Center frequency (fo) deﬁ ned by the center of 6dB bandwidth. (fn) means nominal center frequency 455kHz. For safety purposes, connect the output of ﬁ lters to the IF ampliﬁ er through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic ﬁ lters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. Rg S.S.G. 0dBm RF Voltmeter Connection (1): Input (2): Output (3): Ground (2) (3) (1) R2 E2 Rg+R1=R2=Input/Output Impedance c Test Circuit P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

Attenuation (dB) 100 200 300 400 G.D.T. (μsec.) 430 455 480 Frequency (kHz) c Frequency Characteristics CFUKG455KE4A-R0 100 Attenuation (dB) 200 Frequency (kHz) 300 400 500 600 700 800 900 1000 CFUKG455KE4A-R0 P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

Ceramic Filters (CERAFILr) for Communications Equipment CERAFILr kHz SMD Type CFUKG_X Series The CFUKG_X series is comprised of small, high- performance, thin (4.0mm) ﬁ lters consisting of 4 ceramic elements. The ﬁ lters exhibit an extremely ﬂ at GDT characteristic combined with a narrow bandwidth. The ﬁ lters are recommended for narrow band digital communication applications. c Features 1. The ﬁ lters are mountable by automatic placers. 2. The ﬁ lters can be reﬂ ow soldered and withstand washing. 3. They are slim, at only 4.0mm maximum thickness, and have a small mounting area (7.5x6.0mm) enabling ﬂ exible PCB design. 4. The bandwidth ranges from E to H. 5. Operating temperature range: -20 to +80 (°C) Storage temperature range: -40 to +85 (°C) 1.5±0.3 3.0±0.3 1.0±0.1 4.0±0.3 6.5±0.3 7.5 max. C0.5 1.2±0.1 4.0 max. 1.0±0.1 (in mm) Connection (1): Input (2): Output (3): Ground 1.0±0.3 1.0±0.3 1.5±0.36.0±0.3 (1) (2) (3) MARKING EIAJ CODE Part Number Center Frequency (fo) (kHz) 6dB Bandwidth (kHz) Stop Bandwidth (kHz) Stop Band Attenuation (dB) Insertion Loss (dB) Ripple (dB) GDT Deviation (µs) Input/Output Impedance (ohm) CFUKG455KE4X-R0 455 ±1.5kHz fn±7.5 min. fn±17.5 max. [within 40dB] 27 min. [within fn±100kHz] 6.0 max. [at minimum loss point] 1.0 max. [within fn±5kHz] 25.0 max. [within fn±5kHz] 1500 CFUKG455KF4X-R0 455 ±1.5kHz fn±6.0 min. fn±15.0 max. [within 40dB] 27 min. [within fn±100kHz] 6.0 max. [at minimum loss point] 1.0 max. [within fn±4kHz] 25.0 max. [within fn±4kHz] 1500 CFUKG455KG1X-R0 455 ±1.0kHz fn±4.5 min. fn±12.5 max. [within 40dB] 25 min. [within fn±100kHz] 6.0 max. [at minimum loss point] 1.0 max. [within fn±3kHz] 25.0 max. [within fn±3kHz] 1500 CFUKG455KH1X-R0 455 ±1.0kHz fn±3.0 min. fn±10.0 max. [within 40dB] 25 min. [within fn±100kHz] 7.0 max. [at minimum loss point] 1.0 max. [within fn±2kHz] 25.0 max. [within fn±2kHz] 1500 Center frequency (fo) deﬁ ned by the center of 6dB bandwidth. (fn) means nominal center frequency 455kHz. For safety purposes, connect the output of ﬁ lters to the IF ampliﬁ er through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic ﬁ lters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. Rg S.S.G. 0dBm RF Voltmeter Connection (1): Input (2): Output (3): Ground (2) (3) (1) R2 E2 Rg+R1=R2=Input/Output Impedance c Test Circuit P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

Attenuation (dB) 100 150 200 G.D.T. (μsec.) 430 455 480 Frequency (kHz) c Frequency Characteristics CFUKG455KE4X-R0 100 Attenuation (dB) 200 Frequency (kHz) 300 400 500 600 700 800 900 1000 CFUKG455KE4X-R0 P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

Ceramic Filters (CERAFILr) for Communications Equipment CERAFILr kHz SMD Type CFUKF Series The CFUKF series is comprised of small, high-performance, thin (4.0mm) ﬁ lters consisting of 4 ceramic elements. The ﬁ lters exhibit an extremely ﬂ at GDT characteristic. The ﬁ lters are recommended for digital communication applications and are perfect in hand-held cellular phones, etc. c Features 1. The ﬁ lters are mountable by automatic placers. 2. The ﬁ lters can be reﬂ ow soldered and withstand washing. 3. They are slim, at only 4.0mm maximum thickness, and have a small mounting area (7.5x6.0mm) enabling ﬂ exible PCB design. 4. The bandwidth ranges from A to E. 5. Operating temperature range: -20 to +80 (°C) Storage temperature range: -40 to +85 (°C) 1.5±0.3 3.0±0.3 1.0±0.1 4.0±0.3 6.5±0.3 7.5 max. C0.5 1.2±0.1 4.0 max. 1.0±0.1 (in mm) Connection (1): Input (2): Output (3): Ground 1.0±0.3 1.0±0.3 1.5±0.36.0±0.3 (1) (2) (3) MARKING EIAJ CODE Part Number Center Frequency (fo) (kHz) 6dB Bandwidth (kHz) Stop Bandwidth (kHz) Stop Band Attenuation (dB) Insertion Loss (dB) Ripple (dB) GDT Deviation (µs) Input/Output Impedance (ohm) CFUKF455KA2X-R0 455 ±2.0kHz fn±17.5 min. fn±40.0 max. [within 40dB] 25 min. [within fn±100kHz] 4.0 max. [at minimum loss point] 1.0 max. [within fn±12kHz] 15.0 max. [within fn±12kHz] 1000 CFUKF455KB4X-R0 455 ±1.5kHz fn±15.0 min. fn±35.0 max. [within 40dB] 25 min. [within fn±100kHz] 5.0 max. [at minimum loss point] 1.0 max. [within fn±10kHz] 15.0 max. [within fn±10kHz] 1000 CFUKF455KC4X-R0 455 ±1.5kHz fn±12.5 min. fn±30.0 max. [within 40dB] 25 min. [within fn±100kHz] 6.0 max. [at minimum loss point] 1.0 max. [within fn±8kHz] 15.0 max. [within fn±8kHz] 1000 CFUKF455KD1X-R0 455 ±1.0kHz fn±10.0 min. fn±25.0 max. [within 40dB] 23 min. [within fn±100kHz] 7.0 max. [at minimum loss point] 1.0 max. [within fn±7kHz] 20.0 max. [within fn±7kHz] 1500 CFUKF455KE1X-R0 455 ±1.0kHz fn±7.5 min. fn±20.0 max. [within 40dB] 23 min. [within fn±100kHz] 8.0 max. [at minimum loss point] 1.0 max. [within fn±5kHz] 20.0 max. [within fn±5kHz] 1500 Center frequency (fo) deﬁ ned by the center of 6dB bandwidth. (fn) means nominal center frequency 455kHz. For safety purposes, connect the output of ﬁ lters to the IF ampliﬁ er through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic ﬁ lters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. Rg S.S.G. 0dBm RF Voltmeter Connection (1): Input (2): Output (3): Ground (2) (3) (1) R2 E2 Rg+R1=R2=Input/Output Impedance c Test Circuit P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

Attenuation (dB) 100 150 200 G.D.T. μ(sec.) 430 455 480 Frequency (kHz) c Frequency Characteristics CFUKF455KE1X-R0 100 Attenuation (dB) 200 Frequency (kHz) 300 400 500 600 700 800 900 1000 CFUKF455KE1X-R0 P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

Ceramic Filters (CERAFILr) for Communications Equipment CERAFILr kHz SMD Type CFWKA Series The CFWKA series is comprised of small, high-performance, thin (3.0mm) ﬁ lters consisting of 6 ceramic elements. The ﬁ lters are recommend for pager or hand-held cellular phones. c Features 1. The ﬁ lters are mountable by automatic placers. 2. The ﬁ lters can be reﬂ ow soldered. 3. They are slim, at only 3.0mm maximum thickness. 4. The ﬁ lters are wide bandwidth, ﬂ at GDT within pass band. 5. Operating temperature range: -20 to +80 (°C) Storage temperature range: -40 to +85 (°C) MARKING 6.5 7.5 max. 3.0max. 11.5 5.5 3.0 1.2±0.1 1.5±0.3 1.2±0.1 1.2±0.1 1.5±0.3 1.2±0.1 C0.3 3.03.0 5.5 Dot marking Sealing Sealing : Input : Output : Ground(1) (1) (2) (3)(4)(2) (4) (3) EIAJ CODE Tolerance ±0.3mm in mm() Part Number Nominal Center Frequency (fn) (kHz) 3dB Bandwidth (kHz) 6dB Bandwidth (kHz) Stop Bandwidth (kHz) Stop Band Attenuation (dB) Stop Band Att.(2) (dB) Insertion Loss (dB) Ripple (dB) Input/Output Impedance (ohm) CFWKA450KDFA-R0 450.0 - fn±10.0 min. fn±20.0 max. [within 50dB] 50 min. [within fn±100kHz] - 4.0 max. [at minimum loss point] 3.0 max. [within fn±7kHz] 1500 CFWKA450KEFA-R0 450.0 - fn±7.5 min. fn±15.0 max. [within 50dB] 50 min. [within fn±100kHz] - 6.0 max. [at minimum loss point] 3.0 max. [within fn±5kHz] 1500 CFWKA450KEFA001-R0 450.0 fn±6.5 min. - fn±15.0 max. [within 50dB] 55 min. [fn±18 to ±33kHz] 50 min. [within fn±100kHz] 4.0 max. [at fn] 3.0 max. [within fn±6.5kHz] 1500 CFWKA450KFFA-R0 450.0 - fn±6.0 min. fn±12.5 min. [within 50dB] 50 min. [within fn±100kHz] - 6.0 max. [at minimum loss point] 3.0 max. [within fn±4kHz] 1500 CFWKA450KGFA-R0 450.0 - fn±4.5 min. fn±11.0 max. [within 50dB] 50 min. [within fn±100kHz] - 6.0 max. [at minimum loss point] 2.0 max. [within fn±3kHz] 1500 For safety purposes, connect the output of ﬁ lters to the IF ampliﬁ er through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic ﬁ lters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. E1Rg S.S.G. 0dBm RF Voltmeter Connection (1): Input (2): Output (3)(4): Ground (2) (4) (1) R2 E2 (3) Rg+R1=R2=Input/Output Impedance c Test Circuit P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

Frequency (kHz) Attenuation (dB) G.D.T. (μ sec.) 400 300 200 100 440.0 450.0 460.0 c Frequency Characteristics CFWKA450KEFA001-R0 100 430 455 480 Frequency (kHz) Attenuation (dB) CFWKA450KEFA001-R0 Frequency (kHz) Attenuation (dB) 200 300 400 500 600 700 800 900 1000 100 CFWKA450KEFA001-R0 P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

Ceramic Filters (CERAFILr) for Communications Equipment CERAFILr kHz SMD Type CFWKA_Y Series The CFWKA_Y series is comprised of small, high- performance, thin (3.0mm) ﬁ lters consisting of 6 ceramic elements. The ﬁ lters are recommend for digital communication applications and are perfect in hand-held cellular phones. c Features 1. The ﬁ lters are mountable by automatic placers, and can be reﬂ ow soldered. 2. They are slim, at only 3.0mm maximum thickness. 3. The ﬁ lters are wide bandwidth, ﬂ at GDT within pass band. 4. Operating temperature range: -20 to +80 (°C) Storage temperature range: -40 to +85 (°C) Y50B 1 6.5 7.5 max. 3.0 max. 11.5 5.5 3.0 1.2±0.1 1.5±0.3 1.2±0.1 1.2±0.1 1.5±0.3 1.2±0.1 C0.3 3.03.0 5.5 Dot marking Sealing Sealing Tolerance ±0.3mm in mm : Input : Output : Ground (1) (2) (4) (3) EIAJ CODE (1) (2) (3)(4) Part Number Nominal Center Frequency (fn) (kHz) 3dB Bandwidth (kHz) 6dB Bandwidth (kHz) Stop Bandwidth (kHz) Stop Band Attenuation (dB) Insertion Loss (dB) Spurious Response (dB) GDT Deviation (µs) Input/Output Impedance (ohm) CFWKA450KBFY001-R0 450.0 fn±11.5 min. fn±13.0 min. fn±30.0 max. [within 50dB] 45 min. [within fn±100kHz] 4.0 max. [at minimum loss point] 20 min. [within 0.1 to 1.0MHz] 30.0 max. [within fn±10kHz] 1000 For safety purposes, connect the output of ﬁ lters to the IF ampliﬁ er through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic ﬁ lters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. E1Rg S.S.G. 0dBm RF Voltmeter Connection (1): Input (2): Output (3)(4): Ground (2) (4) (1) R2 E2 (3) Rg+R1=R2=Input/Output Impedance c Test Circuit P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

Attenuation (dB) G.D.T. (μ sec.) 200 150 100 420 430 440 450 460 470 480 Frequency (kHz) c Frequency Characteristics Frequency (kHz) Attenuation (dB) 200 300 400 500 600 700 800 900 1000 100 P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

kHz SMD Type CERAFILr Notice Continued on the following page. Filter is soldered twice within the following temperature conditions. 1. Standard Reflow Soldering Conditions 2. Wash (1) Reflow Electrode is directly soldered with the tip of soldering iron at +350±5°C for 3.0±0.5 seconds. (2) Soldering Iron Do not use strong acidity flux, more than 0.2wt% chlorine content, in reflow soldering. (3) Other s)MMERSION7ASH 2 minutes max. in above solvent at +60°C max. s3HOWEROR2INSE7ASH 2 minutes max. in above solvent at +60°C max. CFC alternatives (HCFC Series), Isopropyl Alcohol (IPA), 7ATER$EMINERALIZED7ATER #LEANING7ATER3OLUTION (Cleanthrough-750H, Pine Alpha 100S), Silicon 4ECHNOCARE&27 3. Coating In case of overcoating the component, conditions such as material of resin, cure temperature, and so on should be evaluated well. (1) Cleaning Solvent (2) Cleaning Conditions s7HENCOMPONENTSAREIMMERSEDINSOLVENT BESURETO maintain the temperature of components below the temperature of solvent. s0LEASEDONOTUSEULTRASONICCLEANING s4OTALWASHINGTIMESHOULDBEMINUTESMAXIMUM s0LEASEENSURETHECOMPONENTISTHOROUGHLYEVALUATEDIN your application circuit. s0LEASEDONOTUSECHLORINE PETROLEUMORALKALICLEANING solvent. s)FYOUPLANTOUSEANYOTHERTYPESOFSOLVENTS PLEASE consult with Murata or Murata representative prior to using. (3) Notice o Soldering and Mounting 0EAK (260°C max.) Heating (230°C) Gradual Cooling Pre-heating (150-180°C) 100 230 260 Temperature (°C) 60-120 sec. SEC max. 30 sec. min. 120 sec. min. c SFPKA/CFUKG/CFUKF Series Notice P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

kHz SMD Type CERAFILr Notice o Storage and Operating Conditions o Rating The component may be damaged if excessive mechanical stress is applied. o Handling 1. If the component is cleaned, please confirm that the reliability has not been degraded. 2. The components, packed in a moisture-proof bag (dry pack), are sensitive to moisture. The following treatment is required before applying reflow soldering, to avoid package cracks or reliability degradation caused by thermal stress. When unpacked, store the component in an atmosphere of below 25°C and below 65%R.H., and solder within 48 hours. 3. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. 1. Product Storage Condition Please store the products in a room where the temperature/humidity is stable, and avoid such places where there are large temperature changes. Please store the products under the following conditions: Temperature: -10 to +40°C Humidity: 15 to 85% R.H. 2. Expiration Date on Storage Expiration date (shelf life) of the products is six months after delivery under the conditions of a sealed and unopened package. Please use the products within six months after delivery. If you store the products for a long time (more than six months), use carefully because solderability may be degraded due to storage under poor conditions. Please confirm solderability and characteristics for the products regularly. 3. Notice on Product Storage (1) Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides and so on), because the characteristics may be reduced in quality and may be degraded in solderability due to storage in a chemical atmosphere. (2) Please do not put the products directly on the floor without anything under them to avoid damp places and/or dusty places. (3) Please do not store the products in places such as a damp heated place or any place exposed to direct sunlight or excessive vibration. (4) Please use the products immediately after the package is opened, because the characteristics may be reduced in quality and/or be degraded in solderability due to storage under poor condition. (5) Please do not drop the products to avoid cracking of ceramic element. 4. Other Please be sure to consult with our sales representative or engineer whenever the products are to be used in conditions not listed above. Continued from the preceding page. P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

kHz SMD Type CERAFILr Notice Continued on the following page. Filter is soldered twice within the following temperature conditions. 1. Standard Reflow Soldering Conditions (1) Reflow Electrode is directly soldered with the tip of soldering iron at +350±5°C for 3.0±0.5 seconds. (2) Soldering Iron Do not use strong acidity flux, more than 0.2wt% chlorine content, in reflow soldering. (3) Other o Soldering and Mounting Peak (260°C max.) Heating (230°C) Gradual Cooling Pre-heating (150-180°C) 100 230 260 Temperature (°C) 60-120 sec. 40 sec. max. 30 sec. min. 120 sec. min. Do not clean or wash the component as it is not hermetically sealed. 2. Wash Do not apply conformal coating onto the component as it's not hermetically sealed. 3. Coating o Storage and Operating Conditions 1. Product Storage Condition Please store the products in a room where the temperature/humidity is stable, and avoid places where there are large temperature changes. Please store the products under the following conditions: Temperature: -10 to + 40°C Humidity: 15 to 85% R.H. 2. Expiration Date on Storage Expiration date (shelf life) of the products is six months after delivery under the conditions of a sealed and unopened package. Please use the products within six months after delivery. If you store the products for a long time (more than six months), use carefully because the solderability may be degraded due to storage under poor conditions. Please confirm solderability and characteristics for the products regularly. 3. Notice on Product Storage (1) Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides and so on), because the characteristics may be reduced in quality and may be degraded in solderability due to storage in a chemical atmosphere. (2) Please do not put the products directly on the floor without anything under them to avoid damp places and/or dusty places. (3) Please do not store the products in places such as a damp heated place or any place exposed to direct sunlight or excessive vibration. (4) Please use the products immediately after the package is opened, because the characteristics may be reduced in quality and/or be degraded in solderability due to storage under poor condition. (5) Please do not drop the products to avoid cracking of ceramic element. 4. Other Please be sure to consult with our sales representative or engineer whenever the products are to be used in conditions not listed above. c CFWKA Series Notice P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

kHz SMD Type CERAFILr Notice o Rating The component may be damaged if excessive mechanical stress is applied. o Handling For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. Continued from the preceding page. P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

Ceramic Filters (CERAFILr) for Communications Equipment CERAFILr MHz SMD Type SFECF10M7 Series SFECF10M7 series for FM receivers are small, high-performance and super thin (1.4mm max.) ﬁ lters. The piezoelectric element is sandwiched by the ceramics substrate. They have 1.4mm max. thickness and a small mounting area (3.45x3.1mm). SFECF series and CDSCB series (MHz Discriminator) enable customers to make VICS/RKE/TPMS set very thin and small. c Features 1. The ﬁ lters are mountable by automatic placers. 2. They are slim, at only 1.4mm max. thickness, and have a small mounting area (3.45x3.1mm) enabling ﬂ exible PCB design. 3. Various bandwidths are available. Select a suitable type in accordance with the desired selectivity. 4. Operating Temperature Range: -20 to +80 (°C)(Standard Type) -40 to +85 (°C)(High-reliability Type) Storage Temperature Range: -40 to +85 (°C)(Standard Type) -55 to +85 (°C)(High-reliability Type) 0.75±0.3 (in mm) 1.3±0.1 3.1±0.2 3.45±0.2 (0.6)(0.6) (0.6) (1.28)(1.28) 0 to 0.4 (6) (1.28)(1.28) 0.65±0.3 0.85±0.30.85±0.3 0 to 0.35 0 to 0.35 0 to 0.4 (5) (4) (1) (2) (3) 0.65±0.3 0.3 min.0.3 min. : EIAJ Monthly Code : Reference( ) (1): Input (2)(5): Ground (3)(4): No connect (6): Output 0.7±0.3 Input electrode marker Standard Type Part Number Center Frequency (fo) (MHz) Nominal Center Frequency (fn) (MHz) 3dB Bandwidth (kHz) Attenuation (kHz) Insertion Loss (dB) Ripple (dB) Spurious Attenuation (1) (dB) Spurious Attenuation (2) (dB) Input/Output Impedance (ohm) SFECF10M7HA00-R0 10.700 [within 9MHz to fo] 30 min. [within fo to 12MHz] 330 [at fn] 1.0 max. 30 min. [within 9MHz to fn] 25 min. [within fn to 12MHz] 330 SFECF10M7GA00-R0 10.700 [within 9MHz to fo] 30 min. [within fo to 12MHz] 330 [at fn] 1.0 max. 30 min. [within 9MHz to fn] 25 min. [within fn to 12MHz] 330 SFECF10M7FA00-R0 10.700 [within 9MHz to fo] 30 min. [within fo to 12MHz] 330 [at fn] 1.0 max. 30 min. [within 9MHz to fn] 25 min. [within fn to 12MHz] 330 SFECF10M7EA00-R0 10.700 [within 9MHz to fo] 30 min. [within fo to 12MHz] 330 SFECF10M7DA0001-R0 10.700 [within 9MHz to fo] 25 min. [within fo to 12MHz] 330 [at fn] 3.0 max. 20 min. [within 9MHz to fn] 20 min. [within fn to 12MHz] 330 Area of Attenuation: [within 20dB] Area of Insertion Loss: at minimum loss point Area of Ripple: within 3dB B.W. Center frequency (fo) deﬁ ned by center of 3dB bandwidth. For safety purposes, connect the output of ﬁ lters to the IF ampliﬁ er through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic ﬁ lters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. P05E.pdf Nov.24,2011 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

(fo) (MHz) Nominal Center Frequency (fn) (MHz) 3dB Bandwidth (kHz) Attenuation (kHz) Insertion Loss (dB) Ripple (dB) Spurious Attenuation (1) (dB) Spurious Attenuation (2) (dB) Input/Output Impedance (ohm) SFECF10M7HA00S0-R0 10.700 [within 9MHz to fo] 30 min. [within fo to 12MHz] 330 [at fn] 1.0 max. 30 min. [within 9MHz to fn] 25 min. [within fn to 12MHz] 330 SFECF10M7GA00S0-R0 10.700 [within 9MHz to fo] 30 min. [within fo to 12MHz] 330 [at fn] 1.0 max. 30 min. [within 9MHz to fn] 25 min. [within fn to 12MHz] 330 SFECF10M7FA00S0-R0 10.700 [within 9MHz to fo] 30 min. [within fo to 12MHz] 330 [at fn] 1.0 max. 30 min. [within 9MHz to fn] 25 min. [within fn to 12MHz] 330 SFECF10M7EA00S0-R0 10.700 [within 9MHz to fo] 30 min. [within fo to 12MHz] 330 [at fn] 3.0 max. 20 min. [within 9MHz to fn] 20 min. [within fn to 12MHz] 330 Area of Attenuation: [within 20dB] Area of Insertion Loss: at minimum loss point Area of Ripple: within 3dB B.W. Center frequency (fo) deﬁ ned by center of 3dB bandwidth. For safety purposes, connect the output of ﬁ lters to the IF ampliﬁ er through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic ﬁ lters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. (1) (2) (3) (6) (5) (4) R

2 C2 E2

S.S.G. Rg Rg = 50Ω R1 = 280Ω ±5% R2 = 330Ω ±5% C2 = 10 ± 2 pF (Including stray capacitance and Input capacitance of RF Volt Meter) E 1: S.S.G. Output Voltage : Input : Ground : No connect : Output (1) (2)(5) (3)(4) (6) c Test Circuit 7.0 6.0 5.0 4.0 3.0 2.0 1.0 0.0 Frequency (MHz) Attenuation (dB) G.D.T. (μsec.) c Frequency Characteristics SFECF10M7FA00-R0 Frequency (MHz) Attenuation (dB) SFECF10M7FA00-R0 P05E.pdf Nov.24,2011 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

Ceramic Filters (CERAFILr) for Communications Equipment CERAFILr MHz SMD Type SFSCE10M7 Series SFSCE series are chip surface mount ﬁ lters available for 3dB bandwidth at 700kHz to 1.3MHz. (more than twice width compared with current types) They have 1.0mm max. thickness and small mounting area (4.5x3.8mm). c Features 1. The ﬁ lters are mountable by automatic placers. 2. They are slim, at only 1.0mm max. thickness, and have a small mounting area (4.5x3.8mm) enabling ﬂ exible PCB design. 3. Available lead (Pb) free solder reﬂ ow. 4. Operating temperature range: -20 to +80 (°C) Storage temperature range: -40 to +85 (°C) c Applications 1. SS digital communication system 2. Digital wireless audio 3. PHS Evolution system 4. RFID Reader Writer 5. RKE (3.5) (in mm) 0.4 3.8(1.8) 4.5(1) (2) (4) (3) (4.0) (1) (2) (3) (4) Tolerance unless otherwise specified: ±0.1 ( ) : Input : Output : No Connect : Ground : EIAJ Monthly Code : Reference (2.25) 1.10.6 0.15 (4-R0.3) (0.3) (1) (4) (2) (3) Part Number Nominal Center Frequency (fn) (MHz) 3dB Bandwidth (kHz) Stop Bandwidth (MHz) Insertion Loss (dB) Ripple (dB) Spurious Response (dB) GDT Deviation (µs) Input/Output Impedance (ohm) SFSCE10M7WF03-R0 10.700 fn±500.0 min. 2.2 max. (Total) [within 20dB] 6.0 max. [at minimum loss point] 2.0 max. [within 3dB Bandwidth] 30/25 min. [within 5.7MHz to fn / fn to 15.7MHz] 0.6 max. [within fn±400kHz] 470 SFSCE10M7WF04-R0 10.700 fn±400.0 min. 1.8 max. (Total) [within 20dB] 6.0 max. [at minimum loss point] 1.5 max. [within 3dB Bandwidth] 35/25 min. [within 5.7MHz to fn / fn to 15.7MHz] 0.6 max. [within fn±325kHz] 470 SFSCE10M7WF05-R0 10.700 fn±325.0 min. 1.7 max. (Total) [within 20dB] 6.0 max. [at minimum loss point] 1.5 max. [within 3dB Bandwidth] 40/30 min. [within 5.7MHz to fn / fn to 15.7MHz] 0.6 max. [within fn±250kHz] 470 For safety purposes, connect the output of ﬁ lters to the IF ampliﬁ er through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic ﬁ lters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. R1+Rg=R2=Input/Output Impedance, Rg=50Ω C2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter) E1: S.S.G. Output Voltage (1): Input (2): Output (3): No Connect (4): Ground RF Voltmeter C2R2 Rg S.S.G. (4) (1) (3) (2) c Test Circuit P05E.pdf Nov.24,2011 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

2.0 1.6 1.2 0.8 0.4 0.0 Frequency (MHz) Attenuation (dB) G.D.T. (μsec.) c Frequency Characteristics SFSCE10M7WF03-R0 Frequency (MHz) Attenuation (dB) SFSCE10M7WF03-R0 P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

MHz SMD Type CERAFILr Notice Continued on the following page. Filter is soldered twice within the following temperature conditions. 1. Standard Reflow Soldering Conditions (1) Reflow Filter is soldered at +350±5°C for 3.0±0.5 seconds. The soldering iron should not touch the filter while soldering. (2) Soldering Iron The component is recommended with placement machines that employ optical placement capabilities. The component might be damaged by excessive mechanical force. Please make sure that you have evaluated by using placement machines before going into mass production. Do not use placement machines that utilize mechanical positioning. Please contact Murata for details beforehand. (3) Condition for Placement Machines (a) The component may be damaged if excess mechanical stress is applied to it mounted on the printed circuit board. (b) Design layout of components on the PC board to minimize the stress imposed on the warp or flexure of the board. (c) After installing components, if solder is excessively applied to the circuit board, mechanical stress will cause destruction resistance characteristics to degrade. To prevent this, be extremely careful in determining shape and dimension before designing the circuit board diagram. (d) When the positioning claws and pick-up nozzle are worn, the load is applied to the components while positioning is concentrated on positioning accuracy, etc. Careful checking and maintenance are necessary to prevent unexpected trouble. (e) When correcting components with a soldering iron, the tip of the soldering iron should not directly touch the component. Depending on the soldering conditions, the effective area of terminations may be reduced. Solder containing Ag should be used to prevent the electrode erosion. (f) Do not use strong acidity flux, more than 0.2wt% chlorine content, in reflow soldering. (4) Other o Soldering and Mounting Temperature (°C)100 230 260 30 sec. min. 40 sec. max. Peak (260°C max.) Pre-heating (150-180°C) Heating (230°C) Gradual Cooling 120 sec. min.60-120 sec. [Component Direction] [Component Layout Close to Board] Place the component lateral to the direction in which stress acts. Susceptibility to stress is in the order of : A>C>B B A C Slit Perforation c SFECF10M7 Series Notice P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

MHz SMD Type CERAFILr Notice o Storage and Operating Conditions o Rating The component may be damaged if excessive mechanical stress is applied. o Handling 1. Accurate test circuit values are required to measure electrical characteristics. Miscorrelation may be caused if there is any deviation, especially stray capacitance, from the test circuit in the specification. 2. The components, packed in a moisture proof bag (dry pack), are sensitive to moisture. The following treatment is required before applying reflow soldering, to avoid reliability degradation caused by thermal stress. When unpacked, store the component in an atmosphere of reflow 30°C and below 60%R.H., and solder within 1 week. 3. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. 1. Product Storage Condition Please store the products in a room where the temperature/humidity is stable, and avoid places where there are large temperature changes. Please store the products under the following conditions: Temperature: -10 to +40°C Humidity: 15 to 85% R.H. 2. Expiration Date on Storage Expiration date (shelf life) of the products is six months after delivery under the conditions of a sealed and unopened package. Please use the products within six months after delivery. If you store the products for a long time (more than six months), use carefully because solderability may be degraded due to storage under poor conditions. Please confirm solderability and characteristics for the products regularly. 3. Notice on Product Storage (1) Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides and so on), because the characteristics may be reduced in quality and may be degraded in solderability due to storage in a chemical atmosphere. (2) Please do not put the products directly on the floor without anything under them to avoid damp places and/or dusty places. (3) Please do not store the products in places such as a damp heated place or any place exposed to direct sunlight or excessive vibration. (4) Please use the products immediately after the package is opened, because the characteristics may be reduced in quality and/or be degraded in solderability due to storage under poor condition. (5) Please do not drop the products to avoid cracking of ceramic element. 4. Other Please be sure to consult with our sales representative or engineer whenever the products are to be used in conditions not listed above. Continued from the preceding page. Do not clean or wash the component as it is not hermetically sealed. 2. Wash In case of overcoating the component, conditions such as material of resin, cure temperature, and so on should be evaluated well. 3. Coating P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

MHz SMD Type CERAFILr Notice Continued on the following page. Filter is soldered twice within the following temperature conditions. 1. Standard Reflow Soldering Conditions (1) Reflow Filter is soldered at +280±5°C for 3.0±0.5 seconds. The soldering iron should not touch the filter while soldering. (2) Soldering Iron The component is recommended with placement machines that employ optical placement capabilities. The component might be damaged by excessive mechanical force. Please make sure that you have evaluated by using placement machines before going into mass production. Do not use placement machines that utilize mechanical positioning. Please contact Murata for details beforehand. (3) Condition for Placement Machines (a) The component may be damaged if excess mechanical stress is applied to it mounted on the printed circuit board. (b) Design layout of components on the PC board to minimize the stress imposed on the warp or flexure of the board. (c) After installing components, if solder is excessively applied to the circuit board, mechanical stress will cause destruction resistance characteristics to degrade. To prevent this, be extremely careful in determining shape and dimension before designing the circuit board diagram. (d) When the positioning claws and pick-up nozzle are worn, the load is applied to the components while positioning is concentrated on positioning accuracy, etc. Careful checking and maintenance are necessary to prevent unexpected trouble. (e) When correcting components with a soldering iron, the tip of the soldering iron should not directly touch the component. (f) Do not use strong acidity flux, more than 0.2wt% chlorine content, in reflow soldering. (4) Other o Soldering and Mounting Peak (240°C max.) Heating (230°C) Gradual Cooling Pre-heating (150-180°C) 100 230 240 Temperature (°C) 60-120 sec. 30 sec. max. 30 sec. min. 120 sec. min. [Component Direction] Place the compon- ent laterally to the direction in which stress acts. [Component Layout Close to Board] Susceptibility to stress is in the order of : A>C>B B A C Slit Perforation c SFSCE10M7WF03-R0 Notice P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

MHz SMD Type CERAFILr Notice o Handling 1. Accurate test circuit values are required to measure electrical characteristics. Miscorrelation may be caused if there is any deviation, especially stray capacitance, from the test circuit in the specification. 2. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. Continued from the preceding page. Do not clean or wash the component as it is not hermetically sealed. 2. Wash In case of overcoating the component, conditions such as material of resin, cure temperature, and so on should be evaluated well. 3. Coating o Storage and Operating Conditions 1. Product Storage Condition Please store the products in a room where the temperature/humidity is stable, and avoid places where there are large temperature changes. Please store the products under the following conditions: Temperature: -10 to + 40°C Humidity: 15 to 85% R.H. 2. Expiration Date on Storage Expiration date (shelf life) of the products is six months after delivery under the conditions of a sealed and unopened package. Please use the products within six months after delivery. If you store the products for a long time (more than six months), use carefully because solderability may be degraded due to storage under poor conditions. Please confirm solderability and characteristics for the products regularly. 3. Notice on Product Storage (1) Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides and so on), because the characteristics may be reduced in quality and may be degraded in solderability due to storage in a chemical atmosphere. (2) Please do not put the products directly on the floor without anything under them to avoid damp places and/or dusty places. (3) Please do not store the products in places such as a damp heated place or any place exposed to direct sunlight or excessive vibration. (4) Please use the products immediately after the package is opened, because the characteristics may be reduced in quality and/or be degraded in solderability due to storage under poor condition. (5) Please do not drop the products to avoid cracking of ceramic element. 4. Other Please be sure to consult with our sales representative or engineer whenever the products are to be used in conditions not listed above. o Rating The component may be damaged if excessive mechanical stress is applied. P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

MHz SMD Type CERAFILr Notice Continued on the following page. Filter is soldered twice within the following temperature conditions. 1. Standard Reflow Soldering Conditions (1) Reflow Filter is soldered at +280±5°C for 3.0±0.5 seconds. The soldering iron should not touch the filter while soldering. (2) Soldering Iron The component is recommended with placement machines that employ optical placement capabilities. The component might be damaged by excessive mechanical force. Please make sure that you have evaluated by using placement machines before going into mass production. Do not use placement machines that utilize mechanical positioning. Please contact Murata for details beforehand. (3) Condition for Placement Machines (a) The component may be damaged if excess mechanical stress is applied to it mounted on the printed circuit board. (b) Design layout of components on the PC board to minimize the stress imposed on the warp or flexure of the board. (c) After installing components, if solder is excessively applied to the circuit board, mechanical stress will cause destruction resistance characteristics to degrade. To prevent this, be extremely careful in determining shape and dimension before designing the circuit board diagram. (d) When the positioning claws and pick-up nozzle are worn, the load is applied to the components while positioning is concentrated on positioning accuracy, etc. Careful checking and maintenance are necessary to prevent unexpected trouble. (e) When correcting components with a soldering iron, the tip of the soldering iron should not directly touch the component. (f) Do not use strong acidity flux, more than 0.2wt% chlorine content, in reflow soldering. (4) Other o Soldering and Mounting [Component Direction] Place the compon- ent laterally to the direction in which stress acts. [Component Layout Close to Board] Susceptibility to stress is in the order of : A>C>B B A C Slit Perforation Peak (260°C max.) Heating (230°C) Gradual Cooling Pre-heating (150-180°C) 100 230 260 Temperature (°C) 60-120 sec. 40 sec. max. 30 sec. min. 120 sec. min. c SFSCE10M7WF04/05-R0 Notice P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

SMD Type CERAFILr Standard Land Pattern Dimensions (in mm) 2.02.475 6.95 1.61.55 7.45 1.1 c SFPKA Series (in mm) 1.2 0.7 0.7 1.4 1.2 2.03.52.0 c CFUKG/CFUKF Series (in mm) 1.2 3.03.0 5.5 4-R3.0 11.5 7.5 6.5 1.6 2.1 1.8 0.5 c CFWKA Series Input Ground No connect Output (1): (2)(5): (3)(4): (6): (in mm)It shows solder resist land pattern. 1.051.401.05 0.10.10.10.1 0.1 0.1 0.3 0.3 0.3 (6) (5) (4) (1) (2) (3) c SFECF10M7 Series (in mm)It shows solder resist land pattern. (1): Input (2): Output (3): No Connect (4): Ground 0.5 0.5 1.4 0.1 0.1 0.1 1.05 (3) (4) (2) (1) 0.8 1.151.3 c SFSCE10M Series P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

kHz SMD Type CERAFILr Packaging Part Number ø180mm 450 450 350 ø330mm 1,000SFPKA CFUKG CFUKF CFWKA c Minimum Quantity Dimensions of Carrier Tape User direction of feed 12.0±0.1 16.0±0.2 8.8±0.1 7.5±0.1 1.75±0.1 4.0±0.1 2.0±0.1 5.3±0.1 ø1.5 7.4±0.1 +0.1-0 Cover film (in mm) Dimensions of Reel Label ø13.0±0.2 2.2±0.5 21.5±1.0 330±2 80±1 240 to 280 400 to 560 160 to 190 17.5±0.5 EmptyComponents Cover film Empty Trailer Leader s0ARTNUMBERMARKEDSIDEISALWAYSFACINGUP c SFPKA Series +1.0-0 -3.0 Dimensions of Carrier Tape Dimensions of Reel (in mm) Leader Cover film Empty EmptyComponents Trailer 160 to 190 160 to 200 400 to 560 (ø60 ) (ø180 ) 17.0±1.0 19.4±0.3 ø13.0±0.5 2.0±0.2 s0ARTNUMBERMARKEDSIDEISALWAYSFACINGUP 5SERDIRECTIONOFFEED Cover film +0.1-0.0 4.0±0.1 16.0±0.2 8.1±0.1 4.2±0.1 7.7±0.1 8.0±0.1 6.7±0.1 6.3±0.1 2.0±0.1 ø1.5 c CFUKG/CFUKF Series Continued on the following page. P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

kHz SMD Type CERAFILr Packaging Continued from the preceding page. Dimensions of Carrier Tape Dimensions of Reel (in mm) User direction of feed +0.1-0.0 4.0±0.1 11.5±0.1 1.75±0.1 24.0±0.3 12.4±0.1 3.2±0.1 0.4±0.1 12.0±0.1 12.0±0.1 2.0±0.1 ø1.5 Cover film8.1±0.1 7.7±0.1 (ø62.0±1.0) (ø178±2.0) 25.5±1.0 29.9±1.0 Leader Cover film Empty EmptyComponents Trailer 160 to 190 240 to 280 400 to 560ø13.0±0.5 2.0±0.2 s0ARTNUMBERMARKEDSIDEISALWAYSFACINGUP c CFWKA Series P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

MHz SMD Type CERAFILr Packaging Part Number ø180mm 2,000 1,500 SFECF SFSCE c Minimum Quantity ( ): Reference (in mm) Dimensions of Carrier Tape Dimensions of Reel ø13.0±0.5 2.0±0.5 240 to 280 400 to 560 160 to 190 EmptyComponents Cover film Empty Trailer Leader 17.0±1.0 +1.0 -013.0 -1.5180 +1.0 -060 Chip filter ø1.55±0.05 User direction of feed Cover film Peeling strength (0.1 to 0.7N) 0.3±0.05 1.84±0.1 (0.05)(3°)10° max. 5.5±0.05 4.1±0.1 1.75±0.1 3° max. 4.1±0.1 4.0±0.1 2.0±0.05 4.0±0.1 3.35 12.0±0.2 +0.1 -0.05 s0ARTNUMBERMARKEDSIDEISALWAYSFACINGUP c SFECF10M7 Series (in mm) Dimensions of Carrier Tape Dimensions of Reel s0ART.UMBERMARKEDSIDEISALWAYSFACINGUP (3°) ± MAX 5SERDIRECTIONOFFEED MAX Cover film 0EELINGSTRENGTH TO. TO TO TO %MPTY#OMPONENTS Cover film %MPTY Trailer ,EADER c SFSCE10M7 Series P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

Ceramic Filters (CERAFILr) for Communications Equipment CERAFILr Plastic Case General Use CFULA Series CFULA series are high selectivity ceramic ﬁ lters, which consist of 4 ceramic elements connected in a ladder form. They are most suitable for digital communications and cellular phones because of their improved GDT characteristics. c Features 1. High selectivity 2. A variety of bandwidths available 3. Excellent GDT characteristics are available within pass bandwidth. 4. Easily mounted on a printed circuit board 5. Operating temperature range: -20 to +80 (°C) Storage temperature range: -40 to +85 (°C) 0.6±0.11.2±0.5 8.0±0.3 MARKING EIAJ CODE 3.3±0.5 2.7±0.3 (1) (2) (3) 0.3±0.1 1.5 max. 0.15±0.05 Connection (1): Input (2): Ground (3): Output (in mm) Part Number Center Frequency (fo) (kHz) 6dB Bandwidth (kHz) Stop Bandwidth (kHz) Stop Band Attenuation (dB) Insertion Loss (dB) Input/Output Impedance (ohm) CFULA455KB2A-B0 455 ±2.0kHz fn±15.0 min. fn±30.0 max. [within 40dB] 27 min. [within fn±100kHz] 4.0 max. [at minimum loss point] 1500 CFULA455KC2A-B0 455 ±2.0kHz fn±12.5 min. fn±24.0 max. [within 40dB] 27 min. [within fn±100kHz] 4.0 max. [at minimum loss point] 1500 CFULA455KD4A-B0 455 ±1.5kHz fn±10.0 min. fn±20.0 max. [within 40dB] 27 min. [within fn±100kHz] 4.0 max. [at minimum loss point] 1500 CFULA455KE4A-B0 455 ±1.5kHz fn±7.5 min. fn±15.0 max. [within 40dB] 27 min. [within fn±100kHz] 6.0 max. [at minimum loss point] 1500 CFULA455KF4A-B0 455 ±1.5kHz fn±6.0 min. fn±12.5 max. [within 40dB] 27 min. [within fn±100kHz] 6.0 max. [at minimum loss point] 2000 CFULA455KG1A-B0 455 ±1.0kHz fn±4.5 min. fn±10.0 max. [within 40dB] 25 min. [within fn±100kHz] 6.0 max. [at minimum loss point] 2000 CFULA455KH1A-B0 455 ±1.0kHz fn±3.0 min. fn±9.0 max. [within 40dB] 35 min. [within fn±100kHz] 6.0 max. [at minimum loss point] 2000 Center frequency (fo) deﬁ ned by the center of 6dB bandwidth. (fn) means nominal center frequency 455kHz. For safety purposes, connect the output of ﬁ lters to the IF ampliﬁ er through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic ﬁ lters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. Rg S.S.G. 0dBm R2 E2 RF Voltmeter Connection (1): Input (2): Ground (3): Output (1) (2) (3) Rg+R1=R2=Input/Output Impedance c Test Circuit P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

Attenuation (dB) 100 150 200 G.D.T. (μsec.) 430 455 480 Frequency (kHz) c Frequency Characteristics CFULA455KE4A-B0 100 Attenuation (dB) 200 Frequency (kHz) 300 400 500 600 700 800 900 1000 CFULA455KE4A-B0 P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

Ceramic Filters (CERAFILr) for Communications Equipment CERAFILr Plastic Case General Use CFWLA Series Ceramic ﬁ lter CFWLA series are low proﬁ le high selectivity ceramic ﬁ lters, which use 6 elements in ladder form. They are best suitable to high-class transceivers, cordless telephones and amateur radios. c Features 1. Low proﬁ le, high selectivity 2. Available bandwidths are B to J as standard 3. Easily mountable on any PC board 4. Operating temperature range: -20 to +80 (°C) Storage temperature range: -40 to +85 (°C) 4.3±0.3 0.15 1.5 max. 2.3±0.5 2.0±0.3 2.9±0.3 11.0±0.5 MARKING EIAJ CODE 1.2±0.5 (1) (2)(4) (3) (5) 1.35±0.5 7.0±0.53.5±0.5 0.6±0.1 0.8±0.1 7.5±0.5 2.6±0.3 Connection (1): Input (2)(3)(4): Ground (5): Output (in mm) 2.9—0.3 2.9±0.3 Part Number Nominal Center Frequency (fn) (kHz) 6dB Bandwidth (kHz) Stop Bandwidth (kHz) Stop Band Attenuation (dB) Insertion Loss (dB) Ripple (dB) Input/Output Impedance (ohm) CFWLA455KBFA-B0 455.0 fn±15.0 min. fn±30.0 max. [within 50dB] 35 min. [within fn±100kHz] 4.0 max. [at minimum loss point] 3.0 max. [within fn±10kHz] 1500 CFWLA455KCFA-B0 455.0 fn±12.5 min. fn±24.0 max. [within 50dB] 35 min. [within fn±100kHz] 4.0 max. [at minimum loss point] 3.0 max. [within fn±8kHz] 1500 CFWLA455KDFA-B0 455.0 fn±10.0 min. fn±20.0 max. [within 50dB] 35 min. [within fn±100kHz] 4.0 max. [at minimum loss point] 3.0 max. [within fn±7kHz] 1500 CFWLA455KEFA-B0 455.0 fn±7.5 min. fn±15.0 max. [within 50dB] 35 min. [within fn±100kHz] 6.0 max. [at minimum loss point] 3.0 max. [within fn±5kHz] 1500 CFWLA455KFFA-B0 455.0 fn±6.0 min. fn±12.5 max. [within 50dB] 35 min. [within fn±100kHz] 6.0 max. [at minimum loss point] 3.0 max. [within fn±4kHz] 2000 CFWLA455KGFA-B0 455.0 fn±4.5 min. fn±10.0 max. [within 50dB] 35 min. [within fn±100kHz] 6.0 max. [at minimum loss point] 2.0 max. [within fn±3kHz] 2000 CFWLA455KHFA-B0 455.0 fn±3.0 min. fn±9.0 max. [within 50dB] 60 min. [within fn±100kHz] 6.0 max. [at minimum loss point] 2.0 max. [within fn±2kHz] 2000 CFWLA455KJFA-B0 455.0 fn±2.0 min. fn±7.5 max. [within 50dB] 60 min. [within fn±100kHz] 7.0 max. [at minimum loss point] 2.0 max. [within fn±1.5kHz] 2000 For safety purposes, connect the output of ﬁ lters to the IF ampliﬁ er through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic ﬁ lters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. R2 E2 RF Voltmeter Connection (1): Input (5): Output (2)(3)(4): Ground Rg S.S.G. 0dBm (1) (2) (3) (4) (5) Rg+R1=R2=Input/Output Impedance c Test Circuit P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

Attenuation (dB) 100 200 300 400 G.D.T. (μsec.) 430 455 480 Frequency (kHz) c Frequency Characteristics CFWLA455KEFA-B0 100 Attenuation (dB) 200 Frequency (kHz) 300 400 500 600 700 800 900 1000 CFWLA455KEFA-B0 P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

Ceramic Filters (CERAFILr) for Communications Equipment CERAFILr Plastic Case Miniaturized Type CFULB Series CFULB series ceramic ﬁ lters are miniature, high- performance ceramic ﬁ lters composed of piezoelectric elements connected in a ladder form. These ﬁ lters, only 6.3mm high, are 65% the volume of conventional types. They are well suited for miniaturizing various kinds of communications equipment, pocket pagers, car radios, cordless telephones and mobile telephones. c Features 1. Miniature and high selectivity 2. A variety of bandwidths are available 3. Operating temperature range: -20 to +80 (°C) Storage temperature range: -40 to +85 (°C) 4.3±0.3 1.0 max. 1.8±0.32.4±0.3 6.5±0.3 0.8±0.3 0.5±0.1 0.7±0.1 3.5±0.3 0.7±0.3 (1) (2) (3) (4) 0.15±0.05 Connection (1): Input (2): Output (3) : Ground(4) (in mm) MARKING EIAJ CODE Part Number Center Frequency (fo) (kHz) 6dB Bandwidth (kHz) Stop Bandwidth (kHz) Stop Band Attenuation (dB) Insertion Loss (dB) Input/Output Impedance (ohm) CFULB455KB2A-B0 455 ±2.0kHz fn±15.0 min. fn±30.0 max. [within 40dB] 27 min. [within fn±100kHz] 4.0 max. [at minimum loss point] 1500 CFULB455KC2A-B0 455 ±2.0kHz fn±12.5 min. fn±24.0 max. [within 40dB] 27 min. [within fn±100kHz] 4.0 max. [at minimum loss point] 1500 CFULB455KD4A-B0 455 ±1.5kHz fn±10.0 min. fn±20.0 max. [within 40dB] 27 min. [within fn±100kHz] 4.0 max. [at minimum loss point] 1500 CFULB455KE4A-B0 455 ±1.5kHz fn±7.5 min. fn±15.0 max. [within 40dB] 27 min. [within fn±100kHz] 6.0 max. [at minimum loss point] 1500 CFULB455KF4A-B0 455 ±1.5kHz fn±6.0 min. fn±12.5 max. [within 40dB] 27 min. [within fn±100kHz] 6.0 max. [at minimum loss point] 2000 CFULB455KG1A-B0 455 ±1.0kHz fn±4.5 min. fn±10.0 max. [within 40dB] 25 min. [within fn±100kHz] 6.0 max. [at minimum loss point] 2000 CFULB455KH1A-B0 455 ±1.0kHz fn±3.0 min. fn±9.0 max. [within 40dB] 35 min. [within fn±100kHz] 6.0 max. [at minimum loss point] 2000 CFULB455KJ1A-B0 455 ±1.0kHz fn±2.0 min. fn±7.5 max. [within 40dB] 35 min. [within fn±100kHz] 6.0 max. [at minimum loss point] 2000 Center frequency (fo) deﬁ ned by the center of 6dB bandwidth. (fn) means nominal center frequency 455kHz. CFULB455K_series ﬁ lters are 4-element ceramic ﬁ lters and miniature versions of CFULA455K_series. For safety purposes, connect the output of ﬁ lters to the IF ampliﬁ er through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic ﬁ lters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. Rg S.S.G. 0dBm R2 E2 RF Voltmeter Connection (1) (2) (3)(4) : Input : Output : Ground (1) (2) (3) (4) Rg+R1=R2=Input/Output Impedance c Test Circuit P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

Attenuation (dB) 100 150 200 G.D.T. (μsec.) 430 455 480 Frequency (kHz) c Frequency Characteristics CFULB455KE4A-B0 100 Attenuation (dB) 200 Frequency (kHz) 300 400 500 600 700 800 900 1000 CFULB455KE4A-B0 P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

Ceramic Filters (CERAFILr) for Communications Equipment CERAFILr Plastic Case Miniaturized Type CFWLB Series CFWLB series ceramic ﬁ lters are miniature, high- performance ceramic ﬁ lters composed of piezoelectric elements connected in a ladder form. These ﬁ lters, only 6.3mm high, are 67% the volume of conventional types. They are well suited for miniaturizing various kinds of communications equipment, pocket pagers, pagers, car radios, cordless telephones and mobile telephones. c Features 1. Miniature and high selectivity 2. A variety of bandwidths are available. 3. Operating temperature range: -20 to +80 (°C) Storage temperature range: -40 to +85 (°C) 4.3±0.3 1.0 max. 2.7±0.32.5±0.3 9.5±0.3 0.7±0.3 0.5±0.1 0.7±0.1 3.5±0.3 0.9±0.3 0.15±0.05 (1) (3) (4) (2) (5) 2.8±0.3 Connection (1): Input (2): Output (3) (4) : Ground (5) (in mm) MARKING EIAJ CODE Part Number Nominal Center Frequency (fn) (kHz) 6dB Bandwidth (kHz) Stop Bandwidth (kHz) Stop Band Attenuation (dB) Insertion Loss (dB) Input/Output Impedance (ohm) CFWLB455KBFA-B0 455.0 fn±15.0 min. fn±30.0 max. [within 50dB] 35 min. [within fn±100kHz] 4.0 max. [at minimum loss point] 1500 CFWLB455KCFA-B0 455.0 fn±12.5 min. fn±24.0 max. [within 50dB] 35 min. [within fn±100kHz] 4.0 max. [at minimum loss point] 1500 CFWLB455KDFA-B0 455.0 fn±10.0 min. fn±20.0 max. [within 50dB] 35 min. [within fn±100kHz] 4.0 max. [at minimum loss point] 1500 CFWLB455KEFA-B0 455.0 fn±7.5 min. fn±15.0 max. [within 50dB] 35 min. [within fn±100kHz] 6.0 max. [at minimum loss point] 1500 CFWLB455KEFA004-B0 455.0 fn±7.5 min. fn±15.0 max. [within 60dB] 60 min. [within fn±15kHz to 30kHz] 5.0 max. [at fn] 1500 CFWLB455KFFA-B0 455.0 fn±6.0 min. fn±12.5 max. [within 50dB] 35 min. [within fn±100kHz] 6.0 max. [at minimum loss point] 2000 CFWLB455KGFA-B0 455.0 fn±4.5 min. fn±10.0 max. [within 50dB] 35 min. [within fn±100kHz] 6.0 max. [at minimum loss point] 2000 CFWLB455KHFA-B0 455.0 fn±3.0 min. fn±9.0 max. [within 50dB] 55 min. [within fn±100kHz] 6.0 max. [at minimum loss point] 2000 CFWLB455KJFA-B0 455.0 fn±2.0 min. fn±7.0 max. [within 50dB] 55 min. [within fn±100kHz] 7.0 max. [at minimum loss point] 2000 CFWLB455K_series ﬁ lters are 4-element ceramic ﬁ lters and miniature versions of CFWLA455K_series. For safety purposes, connect the output of ﬁ lters to the IF ampliﬁ er through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic ﬁ lters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

(1) (2) (3) (4) (5) R2 E2E1 Rg S.S.G. 0dBm RF Voltmeter Connection (1) (2) (3)(4)(5) : Input : Output : Ground Rg+R1=R2=Input/Output Impedance c Test Circuit 100 Attenuation (dB) 100 200 G.D.T. (μsec.) 430 455 480 Frequency (kHz) 150 c Frequency Characteristics CFWLB455KEFA-B0 100 Attenuation (dB) 200 Frequency (kHz) 300 400 500 600 700 800 900 1000 CFWLB455KEFA-B0 P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

Ceramic Filters (CERAFILr) for Communications Equipment CERAFILr Plastic Case Group Delay Flat Type CFULA_Y Series CFULA_Y series are high selectivity ceramic ﬁ lters, which consist of 4 ceramic elements connected in a ladder form. They are most suitable for digital communications and cellular phones because of their improved GDT characteristics. c Features 1. High selectivity 2. A variety of bandwidths are available. 3. Excellent GDT characteristics are available within pass bandwidth. 4. Easily mounted on a printed circuit board 5. Operating temperature range: -20 to +80 (°C) Storage temperature range: -40 to +85 (°C) 0.6±0.11.2±0.5 8.0±0.3 MARKING EIAJ CODE 3.3±0.5 2.7±0.3 (1) (2) (3) 0.3±0.1 1.5 max. 0.15±0.05 Connection (1): Input (2): Ground (3): Output (in mm) Part Number Center Frequency (fo) (kHz) 6dB Bandwidth (kHz) Stop Bandwidth (kHz) Stop Band Attenuation (dB) Insertion Loss (dB) GDT Deviation (µs) Input/Output Impedance (ohm) CFULA455KB4Y-B0 455 ±1.5kHz fn±15.0 min. fn±35.0 max. [within 40dB] 25 min. [within fn±100kHz] 5.0 max. [at minimum loss point] 15.0 max. [within fn±10kHz] 1500 CFULA455KC4Y-B0 455 ±1.5kHz fn±12.5 min. fn±30.0 max. [within 40dB] 25 min. [within fn±100kHz] 6.0 max. [at minimum loss point] 15.0 max. [within fn±8kHz] 1500 CFULA455KD1Y-B0 455 ±1.0kHz fn±10.0 min. fn±25.0 max. [within 40dB] 23 min. [within fn±100kHz] 7.0 max. [at minimum loss point] 20.0 max. [within fn±7kHz] 1500 CFULA455KE1Y-B0 455 ±1.0kHz fn±7.5 min. fn±20.0 max. [within 40dB] 23 min. [within fn±100kHz] 8.0 max. [at minimum loss point] 20.0 max. [within fn±5kHz] 1500 CFULA455KF1Y-B0 455 ±1.0kHz fn±6.0 min. fn±17.5 max. [within 40dB] 23 min. [within fn±100kHz] 9.0 max. [at minimum loss point] 20.0 max. [within fn±4kHz] 2000 CFULA455KG1Y-B0 455 ±1.0kHz fn±4.5 min. fn±15.0 max. [within 40dB] 23 min. [within fn±100kHz] 10.0 max. [at minimum loss point] 20.0 max. [within fn±3kHz] 2000 Center frequency (fo) deﬁ ned by the center of 6dB bandwidth. (fn) means nominal center frequency 455kHz. For safety purposes, connect the output of ﬁ lters to the IF ampliﬁ er through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic ﬁ lters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. Rg S.S.G. 0dBm R2 E2 RF Voltmeter Connection (1): Input (2): Ground (3): Output (1) (2) (3) Rg+R1=R2=Input/Output Impedance c Test Circuit P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

Attenuation (dB) Frequency (kHz) Group Delay Time (μsec) 430 455 480 100 200 150 100 c Frequency Characteristics CFULA455KE1Y-B0 200 300 400 500 600 700 800 900 1000 Attenuation (dB) Frequency (kHz) 100 CFULA455KE1Y-B0 P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

Ceramic Filters (CERAFILr) for Communications Equipment CERAFILr Plastic Case Group Delay Flat Type CFWLA_Y Series CFWLA_Y series are high selectivity ceramic ﬁ lters, which consist of 6 ceramic elements connected in a ladder form. They are most suitable for digital communications and mobile telephones because of their improved GDT characteristics. c Features 1. High selectivity 2. A variety of bandwidths are available 3. Excellent GDT characteristics are available within pass bandwidth. 4. Easily mounted on a printed circuit board 5. Operating temperature range: -20 to +80 (°C) Storage temperature range: -40 to +85 (°C) 4.3±0.3 0.15 1.5 max. 2.3±0.5 2.0±0.3 2.9±0.3 11.0±0.5 MARKING EIAJ CODE 1.2±0.5 (1) (2)(4) (3) (5) 1.35±0.5 7.0±0.53.5±0.5 0.6±0.1 0.8±0.1 7.5±0.5 2.6±0.3 Connection (1): Input (2)(3)(4): Ground (5): Output (in mm) 2.9—0.3 2.9±0.3 Part Number Center Frequency (fo) (kHz) 6dB Bandwidth (kHz) Stop Bandwidth (kHz) Stop Band Attenuation (dB) Insertion Loss (dB) GDT Deviation (µs) Input/Output Impedance (ohm) CFWLA455KB4Y-B0 455 ±1.5kHz fn±15.0 min. fn±30.0 max. [within 50dB] 40 min. [within fn±100kHz] 6.0 max. [at minimum loss point] 30.0 max. [within fn±10kHz] 1500 CFWLA455KC4Y-B0 455 ±1.5kHz fn±12.5 min. fn±27.5 max. [within 50dB] 40 min. [within fn±100kHz] 7.0 max. [at minimum loss point] 30.0 max. [within fn±8kHz] 1500 CFWLA455KD1Y-B0 455 ±1.0kHz fn±10.0 min. fn±25.0 max. [within 50dB] 40 min. [within fn±100kHz] 8.0 max. [at minimum loss point] 30.0 max. [within fn±7kHz] 1500 CFWLA455KE1Y-B0 455 ±1.0kHz fn±7.5 min. fn±20.0 max. [within 50dB] 40 min. [within fn±100kHz] 9.0 max. [at minimum loss point] 30.0 max. [within fn±5kHz] 1500 CFWLA455KF1Y-B0 455 ±1.0kHz fn±6.0 min. fn±17.5 max. [within 50dB] 40 min. [within fn±100kHz] 10.0 max. [at minimum loss point] 40.0 max. [within fn±4kHz] 2000 CFWLA455KG1Y-B0 455 ±1.0kHz fn±4.5 min. fn±15.0 max. [within 50dB] 40 min. [within fn±100kHz] 11.0 max. [at minimum loss point] 40.0 max. [within fn±3kHz] 2000 Center frequency (fo) deﬁ ned by the center of 6dB bandwidth. (fn) means nominal center frequency 455kHz. For safety purposes, connect the output of ﬁ lters to the IF ampliﬁ er through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic ﬁ lters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. R2 E2 RF Voltmeter Connection (1): Input (5): Output (2)(3)(4): Ground Rg S.S.G. 0dBm (1) (2) (3) (4) (5) Rg+R1=R2=Input/Output Impedance c Test Circuit P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

Attenuation (dB) 430 455 480 Frequency (kHz) 100 400 300 200 100 Group Delay Time (μsec) c Frequency Characteristics CFWLA455KE1Y-B0 200 300 400 500 600 700 800 900 1000 Attenuation (dB) Frequency (kHz) 100 CFWLA455KE1Y-B0 P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

Ceramic Filters (CERAFILr) for Communications Equipment CERAFILr Plastic Case Group Delay Flat Type Miniaturized Type CFULB_Y Series Ceramic ﬁ lter CFULB_Y series are miniature and high- performance ﬁ lters. These ﬁ lters, only 6.3mm high, are 65% the volume of conventional types. Well suited for miniaturizing communications equipment, especially for a cellular phone. c Features 1. Miniature, ﬂ at GDT characteristics 2. Suitable for a cellular phone 3. A variety of bandwidths are available. 4. Operating temperature range: -20 to +80 (°C) Storage temperature range: -40 to +85 (°C) 4.3±0.3 1.0 max. 1.8±0.32.4±0.3 6.5±0.3 0.8±0.3 0.5±0.1 0.7±0.1 3.5±0.3 0.7±0.3 (1) (2) (3) (4) 0.15±0.05 Connection (1): Input (2): Output (3) : Ground(4) (in mm) MARKING EIAJ CODE Part Number Center Frequency (fo) (kHz) 6dB Bandwidth (kHz) Stop Bandwidth (kHz) Stop Band Attenuation (dB) Insertion Loss (dB) GDT Deviation (µs) Input/Output Impedance (ohm) CFULB455KB4Y-B0 455 ±1.5kHz fn±15.0 min. fn±35.0 max. [within 40dB] 25 min. [within fn±100kHz] 5.0 max. [at minimum loss point] 15.0 max. [within fn±10kHz] 1500 CFULB455KC4Y-B0 455 ±1.5kHz fn±12.5 min. fn±30.0 max. [within 40dB] 25 min. [within fn±100kHz] 6.0 max. [at minimum loss point] 15.0 max. [within fn±8kHz] 1500 CFULB455KD1Y-B0 455 ±1.0kHz fn±10.0 min. fn±25.0 max. [within 40dB] 23 min. [within fn±100kHz] 7.0 max. [at minimum loss point] 20.0 max. [within fn±7kHz] 1500 CFULB455KE1Y-B0 455 ±1.0kHz fn±7.5 min. fn±20.0 max. [within 40dB] 23 min. [within fn±100kHz] 8.0 max. [at minimum loss point] 20.0 max. [within fn±5kHz] 1500 CFULB455KF1Y-B0 455 ±1.0kHz fn±6.0 min. fn±17.5 max. [within 40dB] 23 min. [within fn±100kHz] 9.0 max. [at minimum loss point] 20.0 max. [within fn±4kHz] 2000 CFULB455KG1Y-B0 455 ±1.0kHz fn±4.5 min. fn±15.0 max. [within 40dB] 23 min. [within fn±100kHz] 10.0 max. [at minimum loss point] 20.0 max. [within fn±3kHz] 2000 Center frequency (fo) deﬁ ned by the center of 6dB bandwidth. (fn) means nominal center frequency 455kHz. CFULB455K_Y series ﬁ lters are 4-element ceramic ﬁ lters and miniature versions of CFULA455K_Y series. For safety purposes, connect the output of ﬁ lters to the IF ampliﬁ er through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic ﬁ lters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. Rg S.S.G. 0dBm R2 E2 RF Voltmeter Connection (1) (2) (3)(4) : Input : Output : Ground (1) (2) (3) (4) Rg+R1=R2=Input/Output Impedance c Test Circuit P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

Attenuation (dB) Frequency (kHz) Group Delay Time (μsec) 430 455 480 100 200 150 100 c Frequency Characteristics CFULB455KE1Y-B0 200 300 400 500 600 700 800 900 1000 Attenuation (dB) Frequency (kHz) 100 CFULB455KE1Y-B0 P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

Ceramic Filters (CERAFILr) for Communications Equipment CERAFILr Plastic Case Group Delay Flat Type CFWLB_Y Series Ceramic ﬁ lter CFWLB_Y series are miniature and high-performance ﬁ lters. These ﬁ lters, only 6.3mm high, are 67% the volume of conventional types. Well suited for miniaturizing communications equipment, especially for a cellular phone. c Features 1. Miniature, ﬂ at GDT characteristics 2. Suitable for a cellular phone 3. A variety of bandwidths are available. 4. Operating temperature range: -20 to +80 (°C) Storage temperature range: -40 to +85 (°C) 4.3±0.3 1.0 max. 2.7±0.32.5±0.3 9.5±0.3 0.7±0.3 0.5±0.1 0.7±0.1 3.5±0.3 0.9±0.3 0.15±0.05 (1) (3) (4) (2) (5) 2.8±0.3 Connection (1): Input (2): Output (3) (4) : Ground (5) (in mm) MARKING EIAJ CODE Part Number Center Frequency (fo) (kHz) 6dB Bandwidth (kHz) Stop Bandwidth (kHz) Stop Band Attenuation (dB) Insertion Loss (dB) GDT Deviation (µs) Input/Output Impedance (ohm) CFWLB455KB4Y-B0 455 ±1.5kHz fn±15.0 min. fn±30.0 max. [within 50dB] 40 min. [within fn±100kHz] 6.0 max. [at minimum loss point] 30.0 max. [within fn±10kHz] 1500 CFWLB455KC4Y-B0 455 ±1.5kHz fn±12.5 min. fn±27.5 max. [within 50dB] 40 min. [within fn±100kHz] 7.0 max. [at minimum loss point] 30.0 max. [within fn±8kHz] 1500 CFWLB455KD1Y-B0 455 ±1.0kHz fn±10.0 min. fn±25.0 max. [within 50dB] 40 min. [within fn±100kHz] 8.0 max. [at minimum loss point] 30.0 max. [within fn±7kHz] 1500 CFWLB455KE1Y-B0 455 ±1.0kHz fn±7.5 min. fn±20.0 max. [within 50dB] 40 min. [within fn±100kHz] 9.0 max. [at minimum loss point] 30.0 max. [within fn±5kHz] 1500 CFWLB455KF1Y-B0 455 ±1.0kHz fn±6.0 min. fn±17.5 max. [within 50dB] 35 min. [within fn±100kHz] 10.0 max. [at minimum loss point] 40.0 max. [within fn±4kHz] 2000 CFWLB455KG1Y-B0 455 ±1.0kHz fn±4.5 min. fn±15.0 max. [within 50dB] 40 min. [within fn±100kHz] 11.0 max. [at minimum loss point] 40.0 max. [within fn±3kHz] 2000 Center frequency (fo) deﬁ ned by the center of 6dB bandwidth. (fn) means nominal center frequency 455kHz. CFWLB455K_Y series ﬁ lters are 4-element ceramic ﬁ lters and miniature versions of CFWLA455K_Y series. For safety purposes, connect the output of ﬁ lters to the IF ampliﬁ er through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic ﬁ lters. The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. (1) (2) (3) (4) (5) R2 E2E1 Rg S.S.G. 0dBm RF Voltmeter Connection (1) (2) (3)(4)(5) : Input : Output : Ground Rg+R1=R2=Input/Output Impedance c Test Circuit P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

Attenuation (dB) 430 455 480 Frequency (kHz) 100 200 150 100 Group Delay Time (μsec) c Frequency Characteristics CFWLB455KE1Y-B0 200 300 400 500 600 700 800 900 1000 Attenuation (dB) Frequency (kHz) 100 CFWLB455KE1Y-B0 P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

Plastic Case Type CERAFILr Minimum Quantity/Notice Part Number Bulk 200 250 150 150 CFULA Series CFULB Series CFWLA Series CFWLB Series (pcs.)The order quantity should be an integral multiple of the "Minimum Quantity" shown above. c Minimum Quantity o Storage and Operating Conditions o Rating The component may be damaged if excessive mechanical stress is applied. o Soldering and Mounting The component cannot withstand washing. o Handling 1. Do not use this product with bend. The component may be damaged if excessive mechanical stress is applied to it mounted on the printed circuit board. 2. All kinds of reflow soldering must not be applied on the component. 3. Do not clean or wash the component as it is not hermetically sealed. 4. Do not use strong acidity flux, more than 0.2wt% chlorine content, in flow soldering. 5. Conformal coating of the component is not acceptable due to non-sealed construction. 6. Accurate test circuit values are required to measure electrical characteristics. Miscorrelation may be caused if there is any deviation, especially stray capacitance, from the test circuit in the specification. 7. For safety purposes, connect the output of filters to the IF amplifier through a D.C. blocking capacitor. Avoid applying a direct current to the output of ceramic filters. 1. Product Storage Condition Please store the products in a room where the temperature/humidity is stable, and avoid places where there are large temperature changes. Please store the products under the following conditions: Temperature: -10 to +40°C Humidity: 15 to 85% R.H. 2. Expiration Date on Storage Expiration date (shelf life) of the products is six months after delivery under the conditions of a sealed and unopened package. Please use the products within six months after delivery. If you store the products for a long time (more than six months), use carefully because solderability may be degraded due to storage under poor conditions. Please confirm solderability and characteristics for the products regularly. 3. Notice on Product Storage (1) Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides and so on), because the characteristics may be reduced in quality and may be degraded in solderability due to storage in a chemical atmosphere. (2) Please do not put the products directly on the floor without anything under them to avoid damp places and/or dusty places. (3) Please do not store the products in places such as a damp heated place or any place exposed to direct sunlight or excessive vibration. (4) Please use the products immediately after the package is opened, because the characteristics may be reduced in quality and/or be degraded in solderability due to storage under poor condition. (5) Please do not drop the products to avoid cracking of ceramic element. 4. Other Please be sure to consult with our sales representative or engineer whenever the products are to be used in conditions not listed above. c Notice P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

Ceramic Discriminators for Communications Equipment kHz Type Ceramic Discriminators Ceramic discriminator consists of a wide band piezoelectric resonator. It is ideal for mobile communications equipment due to its small size and light weight. Standard line includes products for a wide range of applications, from cordless telecom to cellular telephone. Practically adjustment free at the detection circuit, small size is suitable for downsizing. c Features 1. Small in size and light weight 2. Adjustment free at detection circuit 3. High sensitivity and stability 4. Wide range of standard products are available for various ICs. 5. Operating temperature range: -20 to +80 (°C) Storage temperature range: -40 to +85 (°C) MARKING EIAJ CODE 6.6±0.3 1.5±0.3 6.0±0.2 1.15±0.2 1.0±0.1 3.7±0.2 3.1 max. 6.2±0.2 (in mm) CDBKB Series (in mm) MARKING EIAJ CODE 0.6±0.21.8±0.2 6.3 max. 4.2±0.2 6.0±0.2 0.5±0.1 0.15±0.05 0.9±0.2 3.0±0.3 6.0 max.4.2±0.5 CDBLB_CAX Series (in mm) MARKING EIAJ CODE 1.5±0.3 1.0±0.3 0.5±0.2 6.3 max. 4.2±0.2 6.0±0.2 0.5±0.1 0.15±0.05 0.9±0.2 3.0±0.3 6.0 max.4.2±0.5 CDBLB_CAY Series Speciﬁ ed by Impedance Characteristics (Type 1) Part Number Nominal Center Frequency (fn) (kHz) Inclination of Impedance Curve (1) Inclination of Impedance Curve (2) Capacitance (C) IC IC Maker Type CDBLB455KCAX02-B0 455 447.0±1.5kHz (at |Z|=2.05kohm) 463.0±1.5kHz (at |Z|=10.0kohm) 140pF±20% TA8104F TOSHIBA Lead CDBLB455KCAX31-B0 455 447.0±1.5kHz (at |Z|=2.05kohm) 463.0±1.5kHz (at |Z|=10.0kohm) 140pF±20% TA31141 TOSHIBA Lead For safety purposes, avoid applying a direct current between the terminals. The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

–90 100 –180 Impedance (Ω) Phase (deg) 400 420 440 460 480 Frequency (kHz) 500 100K c Impedance Curve CDBLB455KCAX02-B0 500K 180 50K 10K 5K 0 500 –90 100 –180 Impedance (Ω) Phase (deg) 400 420 440 460 480 Frequency (kHz) 500 100K CDBLB455KCAX31-B0 Speciﬁ ed by Impedance Characteristics (Type 2) Part Number Nominal Center Frequency (fn) Anti-resonant Frequency (Fa) Delta F (Fa-Fr) Resonant Resistance (R) Capacitance (C) IC IC Maker Type CDBKB455KCAX33-R0 - 462.0±1.5kHz 40±4.0kHz 200ohm max. 150pF±20% CXA1474 SONY SMD CDBLB455KCAY03-B0 - 455.0±1.5kHz 46±5.0kHz 70ohm max. 550pF±20% CXA1184M SONY Lead CDBLB455KCAX15-B0 - 463.5±1.0kHz 43±2.0kHz 300ohm max. 140pF±20% CXA1183M SONY Lead CDBLB455KCAX25-B0 - 465.0±1.5kHz 45±4.0kHz 300ohm max. 135pF±20% CXA1484 SONY Lead CDBLB455KCAX33-B0 - 465.0±1.5kHz 45±4.0kHz 300ohm max. 135pF±20% CXA1474 SONY Lead For safety purposes, avoid applying a direct current between the terminals. The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. Continued on the following page. 500K 100K 10K Impedance (Ω) Phase (deg) 400 420 440 460 480 500 Frequency (kHz) 500 180 50K 90 5K 0 –90 –180 100 c Impedance Curve CDBKB455KCAX33-R0 100K 180 500 100 –90 –180 Impedance (Ω) 380 400 420 440 460 Frequency (kHz) 480 10K 50K Phase (deg) CDBLB455KCAY03-B0 P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

Continued from the preceding page. 500K 180 50K 10K 5K 0 500 –90 100 –180 Impedance (Ω) Phase (deg) 390 410 430 450 470 Frequency (kHz) 490 100K c Impedance Curve CDBLB455KCAX15-B0 500K 180 50K 90 10K 5K 0 500 –90 100 –180 Impedance (Ω) Phase (deg) 400 420 440 460 480 Frequency (kHz) 500 100K CDBLB455KCAX25-B0 500K 100K 10K Impedance (Ω) Phase (deg) 400 420 440 460 480 500 Frequency (kHz) 500 180 50K 90 5K 0 –90 –180 100 CDBLB455KCAX33-B0 P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

Speciﬁ ed by Recovered Audio Characteristics Part Number Nominal Center Frequency (fn) (kHz) Recovered Audio 3dB BW (kHz) Recovered Audio Output (mV) Distortion (at fn) (%) Distortion (%) IC IC Maker Type CDBKB450KCAY79-R0 450 fn±3.0 min. 145 ±40 - - TB32302FG TOSHIBA SMD CDBKB455KCAY07-R0 455 fn±4.0 min. 350 ±60 3.0 max. - MC3357 MOTOROLA SMD CDBKB455KCAY09-R0 455 fn±4.0 min. 120 ±40 1.5 max. - NE604N PHILIPS SMD CDBKB455KCAY13-R0 455 fn±4.0 min. 330 ±50 4.0 max. - CXA1003BM SONY SMD CDBKB455KCAY16-R0 455 fn±4.0 min. 175 ±40 2.0 max. - MC3372 MOTOROLA SMD CDBKB455KCAY24-R0 455 fn±4.0 min. 100 ±40 2.0 max. - TA31136 TOSHIBA SMD CDBKB455KCAY27-R0 455 fn±4.0 min. 90 ±30 2.0 max. - TK10487 TOKO SMD CDBKB455KCAY28-R0 455 fn±4.0 min. 40 ±20 3.0 max. - TA31142F TOSHIBA SMD CDBKB455KCAY29-R0 455 fn±4.0 min. 100 ±30 2.5 max. - NE605 PHILIPS SMD CDBKB455KCAY35-R0 455 fn±4.0 min. 100 ±40 2.5 max. - TK10930 TOKO SMD CDBKB455KCAY40-R0 455 fn±4.0 min. 40 ±20 3.5 max. - TA31145 TOSHIBA SMD CDBKB455KCAY49-R0 455 fn±4.0 min. 45 ±10 3.0 max. - MC3361 MOTOROLA SMD CDBKB455KCAY66-R0 455 fn±4.2 min. 40 ±10 4.0 max. - NJM2590 JRC SMD [within fn ±6kHz] NE(SA)606/NE(SA)616 PHILIPS SMD [within fn ±8kHz] NE607/NE617 PHILIPS SMD [within fn ±8kHz] CXA1003BM SONY SMD CDBLB455KCAY07-B0 455 fn±4.0 min. 340 ±60 3.0 max. - MC3357 MOTOROLA Lead CDBLB455KCAY13A-B0 455 fn±4.0 min. 350 ±50 3.0 max. - CXA1003BM SONY Lead CDBLB455KCAY24-B0 455 fn±4.0 min. 100 ±40 2.0 max. - TA31136 TOSHIBA Lead CDBLB455KCAY28-B0 455 fn±4.0 min. 40 ±20 3.0 max. - TA31142FN TOSHIBA Lead CDBLB455KCAY34-B0 455 fn±4.0 min. 65 ±20 2.5 max. - MC13136 MOTOROLA Lead CDBLB455KCAY40-B0 455 fn±4.0 min. 40 ±20 3.0 max. - TA31145 TOSHIBA Lead CDBLB455KCAY42-B0 455 fn±4.0 min. 40 ±15 3.0 max. - TK14590/TK14591 TOKO Lead CDBLB455KCAY49-B0 455 fn±4.0 min. 45 ±10 3.0 max. - MC3361 MOTOROLA Lead [within fn ±8kHz] NE604N PHILIPS Lead Continued on the following page. P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

Continued from the preceding page. Part Number Nominal Center Frequency (fn) (kHz) Recovered Audio 3dB BW (kHz) Recovered Audio Output (mV) Distortion (at fn) (%) Distortion (%) IC IC Maker Type [within fn ±8kHz] CXA1003BM SONY Lead CDBLB455KCAX16-B0 455 fn±4.0 min. 185 ±40 2.0 max. - MC3372 MOTOROLA Lead CDBLB455KCAX18-B0 455 fn±3.0 min. 180 ±40 2.0 max. - MC3371 MOTOROLA Lead CDBLB455KCAX36-B0 455 fn±3.5 min. 100 ±25 3.5 max. - NE606/NE616 PHILIPS Lead For safety purposes, avoid applying a direct current between the terminals. The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog. AF output Vcc 0.1μ 0.01μ C RX 0.022μ FM S. S. G. (Rg = 50Ω) 16 915 14 13 12 11 10 1 82 3 4 5 6 7 8.2k 10k MC3357 0.1μ+10μ 47k CDBLB455KCAY07-B0 CDBKB455KCAY07-R0 Part Number (X) C R 150pF 150pF 1.5kΩ 1.3kΩ Unit C R : F : Ω c Test Circuit MC3357 AF output Vcc 0.1μ 47μ C R X 100p 0.1μ 100p IF input 915 14 13 12 11 10 1 82 3 4 5 6 7 0.01μ0.1μ 1000p L 0.01μ NE604 CDBKB455KCAY09-R0 Part Number (X) C R CDBLB455KCLY09-B0 120pF 560 Ω L 220μH 120pF 1.8k Ω – : F : Ω Unit C R NE604N AF outputVcc 0.01μC R X 0.01μ 100μ CXA1003BM 2700p 51k 0.01μ 0.01μ 0.01μ0.01μ0.01μ L 100μ 0.01μ 1314151617181920212223 1 12111098765432 0.01μ CDBLB455KCAY13A-B0 CDBKB455KCAY13-R0 Part Number (X) C R 82pF 82pF 1.2kΩ 1.0kΩ CDBLB455KCLY13-B0 CDBKB455KCLY13-R0 L 82pF 560Ω 220μH IF input : F : Ω Unit C R CXA1003BM AF output : F : Ω Unit C R Vcc 16 15 14 13 12 11 10 9 1 2 3 4 5 6 7 8 0.01μ 51 51k 0.1μ 510k 8.2k 0.01μ R 51k 1.8k 0.1μ C 0.01μ 0.1μ (Rg = 50Ω) FM S. S. G 220p68p MC3372 X CDBLB455KCAX16-B0 CDBKB455KCAY16-R0 Part Number (X) C R 27pF 100pF 4.3kΩ 1.0kΩ MC3372 AF output Unit C R : F : Ω RF input 16 915 14 13 12 11 10 1 82 3 4 5 6 7 0.01μ 51 51k 0.1μ 510k 8.2k 0.01μ 0.1μ 0.1μ 0.01μ IF input 68p 220p RX Test condition Vcc = +4.0V R = 6.2kΩ X: CDBLB455KCAX18-B0 MC3371 Vcc MC3371 AF output Vcc (+2.0V) 10μ + XR 1μ 0.01μ C 0.1μ 0.01μ 0.1μ 10μ TA31136F 16 915 14 13 12 11 10 1 82 3 4 5 6 7 IF input CDBLB455KCAY24-B0 CDBKB455KCAY24-R0 Part Number (X) C R 91pF 91pF 1.5kΩ 1.2kΩ : F : Ω Unit C R TA31136 Continued on the following page. P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

Continued from the preceding page. 20 19 18 17 16 15 14 13 12 R C Vcc TK10487 0.01μ 10μ 0.1μ 0.1μ 0.01μ 0.01μ 8.2k 2 3 4 5 6 7 8 9 X CDBKB455KCAY27-R0 Part Number (X) C R 33pF 1.0k Ω : F : Ω Unit C R c Test Circuit TK10487 AF output Vcc 111213141516171819 1 1098765432 430 + 2.2μ Vcc 560p 68k 68k 3300p 68k 0.01μ R 10μIF input 0.01μ 0.1μ 10μ 10μ 0.1μ 2SC1048 0.01μ TA31142F X C Vcc CDBLB455KCAY28-B0 CDBKB455KCAY28-R0 Part Number (X) C R 22pF 22pF 3.3kΩ 2.7kΩ : F : Ω Unit C R TA31142 AF output Vcc 0.1μ 0.01μ C 0.1μ R X 0.1μ 150p 0.1μ100k 100k 22k 0.1μ22μ NE605 111213141516171819 1 1098765432 IF input 100k CDBKB455KCAY29-R0 Part Number (X) C R 56pF 2.2k Ω Unit C R : F : Ω NE605 RX C Vcc MC13136 0.01μ0.01μ 0.15μ 0.1μ IF input AF input 0.1μ 0.1μ 0.1μ CDBLB455KCAY34-B0 Part Number (X) CR 100pF 1.2k Ω Unit C R : F : Ω MC13136 C XVcc AF output IF input TK10930 0.01μ 0.1μ0.1μ10μ 0.1μ 0.1μ 8.2k CDBKB455KCAY35-R0 Part Number (X) R1 R2 2.0kΩ 1.0kΩ C 33pF : F : Ω Unit C R TK10930 R X L IF input AF output C 20k 8.2k Vcc NE606 or NE616 0.1μ 0.1μ 0.1μ 0.01μ 0.1μ 0.1μ 2.2μ 2.2μ CDBLB455KCAX36-B0 CDBKB455KCLX36-R0 Part Number (X) C R 22pF 27pF 4.7kΩ 2.2kΩ L 1mH : F : Ω Unit C R NE(SA)606/616 AF output Vcc 0.1μ 0.01μ 0.01μ C R X L 0.1μ 0.01μ IF input 1119 18 17 16 15 14 13 12 1 102 3 4 5 6 7 8 9 22k 1.5k NE607/617 (PHILIPS) 8.2k+10μ 0.1μ 0.1μ CDBKB455KCLX39-R0 Part Number (X) C R 22pF 2.7k Ω L 1mH : F : Ω : H Unit C R L NE(SA)607/617 AF output 0.1μ R X 0.1μ 1000p 100k 10μ IF input 3300p Vcc 0.1μ + +10μ 5600p 100k 2.2μ 430 0.01μ 68k 68k 68k 560p TA31145 (TOSHIBA) 1119 18 17 16 15 14 13 12 1 102 3 4 5 6 7 8 9 CDBLB455KCAY40-B0 CDBKB455KCAY40-R0 Part Number (X) R 3.3kΩ 2.7kΩ : F : Ω Unit C R TA31145 Continued on the following page. P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

Continued from the preceding page. AF output Vcc (1.3V) 0.1μ 0.01μ C R 0.0033μ 100k X IF input 24 1314151617181920212223 1 12111098765432 100k 8.2k 0.01μ 560p100k 0.1μ 0.1μ 0.01μ TK14590V (TOKO) 0.01μ0.15μ 100k 100k CDBLB455KCAY42-B0 3.3kΩ Part Number (X) C R 22pF : F : Ω Unit C R c Test Circuit TK14590/14591 47μ 0.01μ 0.1μ Vcc 16 15 14 13 12 11 10 9 1 2 3 4 5 6 7 MC3361 100p 1000p 0.1μ 0.1μ 150k 100k AF output RX IF input 0.022μ 0.1μ 0.1μ Part Number (X) CDBLB455KCAY49-B0 CDBKB455KCAY49-R0 R 1.8kΩ 1.5kΩ Unit C R : F : Ω MC3361 24 22 20 19 16 15 14 13172123 1 3 5 6 9 10 11 128742 1200p 33μ 0.01μ 1200p 1200p RX AF out Vcc CXA3117(SONY) Part Number (X) CDBLB455KCAY50-B0 CDBKB455KCAY50-R0 R 8.2kΩ 6.2kΩ Unit C R : F : Ω CXA3117 Part Number (X) CDBKB455KCAY66-R0 R 3.0kΩ Unit C R : F : Ω RX 10μ S.G. Vcc 0.1μ 0.1μ AF output 10μ 10k 100k 100k 0.01μ 12 3 4 5 67 111213 14 89 10 NJM2590(JRC) NJM2590 500 AF Output Voltage (mV) T.H.D. (%) 440 450 460 470 Frequency (kHz) 50.0 100 10.0 50 5.0 10 1.0 50 .5 10 .1 c Recovered Audio Curve CDBKB455KCAY07-R0 500 AF Output Voltage (mV) T.H.D. (%) 440 450 460 470 Frequency (kHz) 50.0 100 10.0 50 5.0 10 1.0 50 . 5 10 . 1 CDBLB455KCAY07-B0 Continued on the following page. P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

Continued from the preceding page. 500 AF Output Voltage (mV) T.H.D. (%) 440 450 460 470 Frequency (kHz) 50.0 100 10.0 50 5.0 10 1.0 50 .5 10 .1 c Recovered Audio Curve CDBKB455KCAY09-R0 500 AF Output Voltage (mV) T.H.D. (%) 395 435 475 515 Frequency (kHz) 50.0 100 10.0 50 5.0 10 1.0 50 .5 10 .1 CDBLB455KCLY09-B0 500 AF Output Voltage (mV) T.H.D. (%) 440 450 460 470 Frequency (kHz) 50.0 100 10.0 50 5.0 10 1.0 50 .5 10 .1 CDBKB455KCAY13-R0 AF Output Voltage (mV) 425 445 465 485 Frequency (kHz) 500 100 T.H.D. (%) 50.0 10.0 5.0 1.0 0.5 0.1 CDBKB455KCLY13-R0 500 AF Output Voltage (mV) T.H.D. (%) 440 450 460 470 Frequency (kHz) 50.0 100 10.0 50 5.0 10 1.0 50 .5 10 .1 CDBLB455KCAY13A-B0 500 AF Output Voltage (mV) T.H.D. (%) 395 435 475 515 Frequency (kHz) 50.0 100 10.0 50 5.0 10 1.0 50 .5 10 .1 CDBLB455KCLY13-B0 Continued on the following page. P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

Continued from the preceding page. AF Output Voltage (mV) 440 450 460 470 Frequency (kHz) 500 100 T.H.D. (%) 50.0 10.0 5.0 1.0 0.5 0.1 c Recovered Audio Curve CDBKB455KCAY16-R0 AF Output Voltage (mV) 440 450 460 470 Frequency (kHz) 500 100 T.H.D. (%) 50.0 10.0 5.0 1.0 0.5 0.1 CDBLB455KCAX16-B0 AF Output Voltage (mV) 440 450 460 470 Frequency (kHz) 500 100 T.H.D. (%) 50.0 10.0 5.0 1.0 0.5 0.1 CDBLB455KCAX18-B0 AF Output Voltage (mV) 440 450 460 470 Frequency (kHz) 500 100 T.H.D. (%) 50.0 10.0 5.0 1.0 0.5 0.1 CDBKB455KCAY24-R0 AF Output Voltage (mV) 440 450 460 470 Frequency (kHz) 500 100 T.H.D. (%) 50.0 10.0 5.0 1.0 0.5 0.1 CDBLB455KCAY24-B0 AF Output Voltage (mV) 440 450 460 470 Frequency (kHz) 500 100 T.H.D. (%) 50.0 10.0 5.0 1.0 0.5 0.1 CDBKB455KCAY27-R0 Continued on the following page. P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

Continued from the preceding page. AF Output Voltage (mV) 440 450 460 470 Frequency (kHz) 500 100 T.H.D. (%) 50.0 10.0 5.0 1.0 0.5 0.1 c Recovered Audio Curve CDBKB455KCAY28-R0 AF Output Voltage (mV) 440 450 460 470 Frequency (kHz) 500 100 T.H.D. (%) 50.0 10.0 5.0 1.0 0.5 0.1 CDBLB455KCAY28-B0 AF Output Voltage (mV) 440 450 460 470 Frequency (kHz) 500 100 T.H.D. (%) 50.0 10.0 5.0 1.0 0.5 0.1 CDBKB455KCAY29-R0 AF Output Voltage (mV) 440 450 460 470 Frequency (kHz) 500 100 T.H.D. (%) 50.0 10.0 5.0 1.0 0.5 0.1 CDBLB455KCAY34-B0 AF Output Voltage (mV) 440 450 460 470 Frequency (kHz) 500 100 T.H.D. (%) 50.0 10.0 5.0 1.0 0.5 0.1 CDBKB455KCAY35-R0 AF Output Voltage (mV) T.H.D. (%) Frequency (kHz) 100 500 425 445 465 486 0.1 0.5 CDBKB455KCLX36-R0 Continued on the following page. P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

Continued from the preceding page. AF Output Voltage (mV) 440 450 460 470 Frequency (kHz) 500 100 T.H.D. (%) 50.0 10.0 5.0 1.0 0.5 0.1 c Recovered Audio Curve CDBLB455KCAX36-B0 Frequency (kHz) 425 445 465 485 500 100 50.0 10.0 5.0 1.0 0.5 0.1 AF Output Voltage (mV) T.H.D. (%) CDBKB455KCLX39-R0 500 AF Output Voltage (mV) T.H.D. (%) 440 450 460 470 Frequency (kHz) 50.0 100 10.0 50 5.0 10 1.0 50 .5 10 .1 CDBKB455KCAY40-R0 500 AF Output Voltage (mV) T.H.D. (%) 440 450 460 470 Frequency (kHz) 50.0 100 10.0 50 5.0 10 1.0 50 .5 10 .1 CDBLB455KCAY40-B0 500 AF Output Voltage (mV) T.H.D. (%) 440 450 460 470 Frequency (kHz) 50.0 100 10.0 50 5.0 10 1.0 50 .5 10 .1 CDBLB455KCAY42-B0 Frequency (kHz) AF Output Voltage (mV) T.H.D. (%) 440 450 460 470 500 100 50.0 10.0 5.0 1.0 0.5 0.1 CDBKB455KCAY49-R0 Continued on the following page. P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

Continued from the preceding page. Frequency (kHz) AF Output Voltage (mV) T.H.D. (%) 440 450 460 470 500 100 50.0 10.0 5.0 1.0 0.5 0.1 c Recovered Audio Curve CDBLB455KCAY49-B0 Frequency (kHz) AF Output Voltage (mV) T.H.D. (%) 440 450 460 470 500 100 50.0 10.0 5.0 1.0 0.5 0.1 CDBKB455KCAY50-R0 Frequency (kHz) AF Output Voltage (mV) T.H.D. (%) 440 450 460 470 500 100 50.0 10.0 5.0 1.0 0.5 0.1 CDBLB455KCAY50-B0 Frequency (kHz) AF Output Voltage (mV) T.H.D. (%) 440 450 460 470 500 100 50.0 10.0 5.0 1.0 0.5 0.1 CDBKB455KCAY66-R0 Speciﬁ ed by S Curve Characteristics Part Number Nominal Center Frequency (fn) (kHz) S Curve (1) Output Volt. at fn (mV) S Curve (2) at fn±4.8kHz (mV) IC IC Maker Type CDBKB455KCAY54-R0 455 165 ±20 170 ±20 TA31149 TOSHIBA SMD P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

10μ 0.1μ 10μ 1000p 100k 0.1μ RX AF output 1200p 1500p Vcc (+1.4V) TA31149(TOSHIBA) 12118 106 IF input 2.2μ 430 23 21 20 Vcc 100k Vcc 100k Vcc 19 18 14 13 Part Number (X) CDBKB455KCAY54-R0 R 2.7kΩ Unit C R : F : Ω c Test Circuit TA31149 440 450 460 470 0.0 0.1 0.2 0.3 0.4 Frequency (kHz) Volt (V) c S Curve CDBKB455KCAY54-R0 P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

Ceramic Discriminators for Communications Equipment MHz Type Ceramic Discriminators CDSCB10M7 series forms a resonator on a piezoelectric ceramic substrate. In combination with ICs, this type obtains stable demodulation characteristics in a wide bandwidth. They have 1.0mm max. thickness and small mounting area (4.5x2.0mm). c Features 1. Compact and high reliability and recommended for automotive applications. 2. Can be combined with various ICs. The IC is determined by the last number in the part number. 3. Stable demodulation characteristics can be obtained without adjustment. 4. Stable temperature characteristics 5. Available lead (Pb) free solder reﬂ ow. 4.1 max. 1.0 max. 4.5±0.1 0.2±0.2 2.0±0.1 0.3±0.2 0.4(ref.) 0.4(ref.) 1.4 max. 0.4±0.05 1.5±0.1 0.8±0.10.8±0.1 1.5±0.1 (in mm) CDSCB Series Part Number Center Frequency (fo) (MHz) Recovered Audio 3dB BW (kHz) Recovered Audio Output (mV) Distortion (%) S Curve (mV) IC CDSCB10M7GA135-R0 10.700 ±30kHz 155 min. 75 min. - - TH71101 CDSCB10M7GA136-R0 10.700 ±30kHz 140 min. 120 min. - - TH7122 CDSCB10M7GF123-R0 10.700 (fn) - - - 900 min. TA31275FN CDSCB10M7GF123S-R0 10.700 (fn) - - - 900 min. TA31275FN CDSCB10M7GF126-R0 10.700 (fn) - - - 400 min. NJM2295AV (fn) means nominal center frequency. The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page. For safety purposes, avoid applying a direct current between the terminals. P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

4.7μ X 150 S.S.G. Vcc (3.0V) 0.1μ 0.47μ TEA5757HL (PHILIPS) X: CDSCB10M7GA105A-R0 0.1μ 0.1μ 10μ 100μ 100k AFC (n) AFC (p)AF OUT DC OUT 330p 0.22μ 0.1μ Unit C R : F : Ω c Test Circuit CDSCB10M7GA105A-R0 30 23242526272829 1 8765432 2.2μ D.C. OUT S.S.G. Vcc (1.2V) AF OUT 0.01μ 0.01μ 0.01μ 0.01μ 680p TA2154FN (TOSHIBA) X: CDSCB10M7GA113-R0 0.01μ X Unit C R : F : Ω CDSCB10M7GA113-R0 0.01μ 0.01μ 0.01μ 0.01μ 0.01μ 0.47μ 2.2μ 0.1μ 0.1μ 0.22μ 4.7μ 120p 220k 68p 15p 82p 47p 1000p 100p 100p 10k 10k1k IF Input AF Output Vcc (3.0V) (TEXAS INSTRUMENTS) TRF6901 PIC16F84 X Unit C R L : F : Ω : H X: CDSCB10M7GA119-R0 13 14 15 16 17 18 19 20 21 22 23 24 48 47 46 45 44 43 42 41 40 39 38 37 18 17 16 15 14 13 12 11 10 123456789 CDSCB10M7GA119-R0 0.47μ 0.01μAF Output D.C. Output LV23100V (SANYO) PIC16F84 (Control IC) 10k 10k 10k Vcc (3.2V) 1μ0.047μ 0.047μ 2.2μ 0.1μ 0.047μ10k75 0.015μ 0.01μ 100μ 10p 100p 10p22μ 10μ 3.3k S.G. X Unit C R : F : ΩX: CDSCB10M7GA121-R0 36 35 34 33 32 31 30 28 29 27 26 25 24 23 22 21 20 19 1234567 9 8 1 01 11 21 31 41 51 61 71 8 CDSCB10M7GA121-R0 Unit C R : F : Ω X: CDSCB10M7GA135-R0 1 2 3 4 5 6 7 8 1718192021222324 220k 0.01μ 0.01μ 1000p 0.1μ 0.01μ1000p100p 330p 0.033μ 12p 0.01μ 0.01μ 0.01μ 1000p C.D. 330p10μ S.G. Vcc (5.0V) TH71101, TH71102, TH71111 or TH71112 (MELEXIS) FKS-OUTAF-OUT 330k CDSCB10M7GA135-R0 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 9 18 17 16 15 14 13 12 11 10 1718192021222324 Unit C R : F : Ω X: CDSCB10M7GA136-R0 0.1μ 2.2μ 100k 3.3k 0.1μ 100p 10k PIC16F84 (Control IC) TH7122 [Internal AFC Enabled] (MELEXIS) Vcc (5.0V) 0.01μ 0.01μ 0.1μ0.01μ 330p 330p 100k 330p S.G. C.D. FKS-OUT AF-OUT 330p 330p 0.01μ CDSCB10M7GA136-R0 Continued on the following page. P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

Continued from the preceding page. Vcc (3V) 9101112131415 1 8765432 IF IN AF OUT 0.01μ 33μ 0.01μ R 10p 4.7μ X0.01μ 0.01μ 0.01μ + TA31161 (TOSHIBA) X: CDSCB10M7GF072-R0 R: 820 Unit C R L : F : Ω : H c Test Circuit CDSCB10M7GF072-R0 Vcc (5.0V) 1 2 3 4 5 6 7 8 9 10 11 12 24 23 22 21 20 19 18 17 16 15 14 13 0.01μ TA31272FN (TOSHIBA) AF Output C.D. 0.01μ 0.01μ 1000p 100μ 0.01μ 0.01μ 0.01μ 1.2k C.D.: Ceramic Discriminator Unit R C L : Ω : F : H S.S.G. CDSCB10M7GF107S-R0 0.01μ 0.01μ Vcc (3V) 12k 51k 1000p S.S.G. R D.C. OUT AF OUT X 0.01μ 0.01μ 0.01μ 0.01μ 4.7μ 0.01μ 1.2μ TK14588V (TOKO) Unit C R L : F : Ω : H X: CDSCB10M7GF109-R0 R: 820 910111213141516 87654321 CDSCB10M7GF109-R0 Vcc (5.0V) 1 2 3 4 5 6 7 8 9 10 11 12 24 23 22 21 20 19 18 17 16 15 14 13 0.1μ 0.01μ TA31275FN (TOSHIBA)1000p 3300p 0.01μ AF OUT DC-OUT 0.01μ 0.01μ 0.1μ 0.1μ 0.1μ 1.8k 0.01μ X: CDSCB10M7GF123-R0 Unit C R : F : Ω S.S.G. CDSCB10M7GF123-R0 Vcc (5.0V) 1 2 3 4 5 6 7 8 9 10 20 19 18 17 16 15 14 13 12 11 NJM2295AV (JRC) 0.01μ DC-OUT 100p 0.01μ 10μ 0.01μ 10μ 180 C.D. 0.01μ X: CDSCB10M7GF126-R0 Unit C R : F : Ω S.G. 10μ 10μ CDSCB10M7GF126-R0 P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

AF Output Voltage (mV) T.H.D. (%) Frequency (MHz) Input fdev. fmod. Vcc = 100dBμ = ±75kHz = 1kHz = 3.0V 100 1000 0.1 100 AF Output Distortion c Recovered Audio Curve CDSCB10M7GA105A-R0 AF Output Voltage (mV) T.H.D. (%) Frequency (MHz) Input fdev. fmod. Vcc = 100dBμ = ±75kHz = 1kHz = 1.2V 100 1000 0.1 100 AF Output Distortion CDSCB10M7GA113-R0 AF Output Voltage (mV) T.H.D. (%) Frequency (MHz) Input fdev. fmod. Vcc = 100dBμ = ±60kHz = 1kHz = 3.0V 100 1000 0.1 100 AF Output Distortion CDSCB10M7GA119-R0 AF Output Voltage (mV) T.H.D. (%) Frequency (MHz) Input fdev. fmod. Vcc = 100dBμ = ±75kHz = 1kHz = 3.2V 100 1000 0.1 100 AF Output Distortion CDSCB10M7GA121-R0 AF Output Voltage (mV) Frequency (MHz) Input fdev. fmod. Vcc = 100dBμ = ±50kHz = 1kHz = 5.0V 100 1000 0.1 CDSCB10M7GA135-R0 AF Output Voltage (mV) Frequency (MHz) Input fdev. fmod. Vcc = 100dBμ = ±50kHz = 1kHz = 5.0V 100 1000 0.1 CDSCB10M7GA136-R0 Continued on the following page. P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

Continued from the preceding page. AF Output Voltage (mV) T.H.D. (%) Frequency (MHz) 100 10 1000 100 10 1 10 .1 Input fdev. fmod. Vcc = 100dBμ = ±80kHz = 1kHz = 3.0V c Recovered Audio Curve CDSCB10M7GF072-R0 Input fdev. fmod. Vcc = 100dBμ = ±64kHz = 1kHz = 3.0V AF Output Voltage (mV) T.H.D. (%) Frequency (MHz) 1000 100 100 0.1 10.4 10.6 10.8 11.0 CDSCB10M7GF109-R0 Volt (V) Frequency (MHz) 0.5 0.0 1.0 1.5 2.0 2.5 c S Curve CDSCB10M7GF123-R0 Volt (V) Frequency (MHz) 1.0 2.0 3.0 4.0 CDSCB10M7GF126-R0 P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

Ceramic Discriminators Notice 1. Standard Reflow Soldering Conditions (1) Reflow CFC alternatives (HCFC Series), Isopropyl Alcohol (IPA), Water (Demineralized Water), Cleaning Water Solution (Cleanthrough-750H, Pine Alpha 100S), Silicon (Technocare FRW) 2. Wash (1) Cleaning Solvent o Immersion Wash 2 minutes max. in above solvent at +60°C max. o Shower or Rinse Wash 2 minutes max. in above solvent at +60°C max. (2) Cleaning Conditions o When components are immersed in solvent, be sure to maintain the temperature of components below the temperature of solvent. o Please do not use ultrasonic cleaning. o Total washing time should be within 4 minutes. o Please ensure the component is thoroughly evaluated in your application circuit. o Please do not use chlorine, petroleum or alkaline cleaning solvents. o If you plan to use any other type of solvents, please consult with Murata or Murata representative prior to using. (3) Notice Electrode is directly soldered with the tip of soldering iron at +350±5°C for 3.0±0.5 seconds. (2) Soldering Iron Peak (260°C max.) Heating (230°C) Gradual Cooling Pre-heating (150-180°C) 100 230 260 Temperature (°C) 60-120 sec. 40 sec. max. 30 sec. min. 120 sec. min. Filter is soldered twice within the following temperature conditions. c CDBKB Series Notice (Soldering and Mounting) Continued on the following page. c CDBKB Series Notice (Handling) P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering. 1. The component will be damaged when an excessive stress is applied. 2. If the component is cleaned, please conﬁ rm that the reliability has not been degraded. 3. In case of covering ﬁ lter with over coating, conditions such as material of resin, cure temperature, and so on should be evaluated carefully. 4. Do not use strong acidity ﬂ ux, more than 0.2wt% chlorine content, in reﬂ ow soldering. 5. The product, packed in a moisture-proof bag (dry pack), is sensitive to moisture. The following treatment is required before applying reﬂ ow soldering, to avoid package cracks or reliability degradation caused by thermal stress. When unpacked, store the component in an atmosphere of below 25 degrees C. and below 65%R.H., and solder within 48 hours.

Ceramic Discriminators Notice c CDBLB Series Notice (Handling) Continued from the preceding page. P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering. 1. Do not use this product with bend. The component may be damaged if excess mechanical stress is applied to it mounted on the printed circuit board. 2. The component will be damaged when an excessive stress is applied. 3. No type of reﬂ ow soldering should be applied to this component. 4. Do not clean or wash the component as it is not hermetically sealed. 5. Do not use strong acidity ﬂ ux, more than 0.2wt% chlorine content, in ﬂ ow soldering. 6. In case of covering discriminator with over coating, conditions such as material of resin, cure temperature, and so on should be evaluated carefully.

Ceramic Discriminators Notice Continued on the following page. Filter is soldered twice within the following temperature conditions. 1. Standard Reflow Soldering Conditions (1) Reflow Filter is soldered at +300±5°C for 3.0±0.5 seconds. The soldering iron should not touch the filter while soldering. (2) Soldering Iron The component is recommended with placement machines that employ optical placement capabilities. The component might be damaged by excessive mechanical force. Please make sure that you have evaluated by using placement machines before going into mass production. Do not use placement machines that utilize mechanical positioning. Please contact Murata for details beforehand. (3) Condition for Placement Machines (a) The component may be damaged if excess mechanical stress is applied to it mounted on the printed circuit board. (b) Design layout of components on the PC board to minimize the stress imposed on the warp or flexure of the board. (c) After installing components, if solder is excessively applied to the circuit board, mechanical stress will cause destruction resistance characteristics to degrade. To prevent this, be extremely careful in determining shape and dimension before designing the circuit board diagram. (d) When the positioning claws and pick-up nozzle are worn, the load is applied to the components while positioning is concentrated on positioning accuracy, etc. Careful checking and maintenance are necessary to prevent unexpected trouble. (e) When correcting components with a soldering iron, the tip of the soldering iron should not directly touch the component. Depending on the soldering conditions, the effective area of terminations may be reduced. Solder containing Ag should be used to prevent the electrode erosion. (4) Other o Soldering and Mounting Temperature (°C)100 230 260 30 sec. min. 40 sec. max. Peak (260°C max.) Pre-heating (150-180°C) Heating (230°C) Gradual Cooling 120 sec. min.60-120 sec. [Component Direction] [Component Layout Close to Board] Place the component laterally to the direction in which stress acts. Susceptibility to stress is in the order of : A>C>B B A CSlit Perforation c CDSCB Series Notice P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

Ceramic Discriminators Notice o Storage and Operating Conditions o Rating The component may be damaged if excessive mechanical stress is applied. o Handling 1. Accurate test circuit values are required to measure electrical characteristics. Miscorrelation may be caused if there is any deviation, especially stray capacitance, from the test circuit in the specification. 2. For safety purposes, avoid applying a direct current between the terminals. 1. Product Storage Condition Please store the products in a room where the temperature/humidity is stable, and avoid places where there are large temperature changes. Please store the products under the following conditions: Temperature: -10 to +40°C Humidity: 15 to 85% R.H. 2. Expiration Date on Storage Expiration date (shelf life) of the products is six months after delivery under the conditions of a sealed and unopened package. Please use the products within six months after delivery. If you store the products for a long time (more than six months), use carefully because solderability may be degraded due to storage under poor conditions. Please confirm solderability and characteristics for the products regularly. 3. Notice on Product Storage (1) Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic gas, Sulfides and so on), because the characteristics may be reduced in quality and may be degraded in solderability due to storage in a chemical atmosphere. (2) Please do not put the products directly on the floor without anything under them to avoid damp places and/or dusty places. (3) Please do not store the products in places such as a damp heated place or any place exposed to direct sunlight or excessive vibration. (4) Please use the products immediately after the package is opened, because the characteristics may be reduced in quality and/or be degraded in solderability due to storage under poor condition. (5) Please do not drop the products to avoid cracking of ceramic element. 4. Other Please be sure to consult with our sales representative or engineer whenever the products are to be used in conditions not listed above. Continued from the preceding page. Do not clean or wash the component as it is not hermetically sealed. 2. Wash In case of overcoating the component, conditions such as material of resin, cure temperature, and so on should be evaluated well. 3. Coating P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

Ceramic Discriminators Standard Land Pattern Dimensions/Packaging (in mm) 1.2 1.2 2.04.9 2.6 c Standard Land Pattern Dimensions CDBKB Series 2.6 1.0 2.0 1.0 3.0 (in mm) CDSCB Series Part Number Taping ø180mm Bulk 500 2000 500 CDBKB Series CDBLB Series CDSCB Series (pcs.)The order quantity should be an integral multiple of the "Minimum Quantity" shown above. c Minimum Quantity User direction of feed Cover film3° max. +0.1-0.0 +1.0 -3.0 Dimensions of Carrier Tape Dimensions of Reel (in mm) Leader Cover film Empty EmptyComponents Trailer 160 to 190 160 to 200 400 to 560 (ø60 ) (ø180 ) 17.0±0.3 4.0±0.1 7.5±0.1 1.75±0.1 16.0±0.15 3.3±0.1 7.2±0.1 8.0±0.1 6.3±0.1 2.0±0.1 19.4±1.0 ø13.0±0.5 ø1.5 2.0±0.2 s0ARTNUMBERMARKEDSIDEISALWAYSFACINGUP c CDBKB Series Continued on the following page. P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

Ceramic Discriminators Standard Land Pattern Dimensions/Packaging Continued from the preceding page. 4.0±0.1 Cover film 4.0±0.1 2.0±0.05 12.0±0.2 (9.0) ø1.5+0.1 ø1.5+0.1 5.5±0.05 1.75±0.1 4.7±0.1 User direction of feed s0ARTNUMBERMARKEDSIDEISALWAYSFACINGUP 0.3±0.05 MAX 1.1±0.1(3°) 2.2±0.10EELINGSTRENGTH 0.1 to 0.7N 10° Dimension of reel ( ): Reference (in mm) ø13.0±0.2 2.0±0.5 17.0±1.0 180+0.1 -1.5 60+0.1 240 to 280 400 to 560 160 to 190 %MPTY#OMPONENTS Cover film %MPTY 4RAILER ,EADER 13.0+1.0 $IMENSIONSOF#ARRIER4APE c CDSCB Series P05E.pdf Nov.24,2011 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. This catalog has only typical speciﬁ cations because there is no space for detailed speciﬁ cations. Therefore, please review our product speciﬁ cations or consult the approval sheet for product speciﬁ cations before ordering.

Product Information

CDBKB455KCAY09-R0 specifications and overview.

Summary

Ceramic Discriminators for Communications Equipment

Description

Ceramic Discriminators for Communications Equipment

Source title CDBKB455KCAY09-R0 Datasheet(PDF) - Murata Manufacturing Co., Ltd.

Related Parts

More parts from the same family.

Browse manufacturer