CDA SENSATA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

Features

  • 30VDC or 120VAC, 2 to 40 Amps
  • Open and closed construction
  • Automatic and manual reset options
  • Ignition protected SAE J1171
  • Weatherproof SAE J553
  • UL Recognized E36869 Calibration : 200% rated current, 77°F (25°C) 2 to 10 amps : 20 to 150 seconds 12.5 to 40 amps : 5 to 55 seconds Ultimate Trip At 77°F (25°C) Must hold 100%, Must trip 135% Endurance Per SAE J553 Interrupt Current Capacity Per SAE J553 and ABYC E-11 Vibration 10G MIL-STD-202 Method 204, Condition A Mechanical Shock MIL-STD-202 Method 101D (sealed only) Dielectric Strength MIL-STD-202 Method 301, 1500VAC min Insulation Resistance MIL-STD-202 Method 302, Condition B, 100MΩ min Weight CDM: 48 grams max CDA: 41 grams max CM : 37 grams max CA : 32 grams max

www.sensata.comCopyright © 2018 Sensata Technologies, Inc. TRIP CURVE DIMENSIONS All dimensions are in inches [mm] Approximate Time, Current Characteristics At 77°F (25°C)

www.sensata.comCopyright © 2018 Sensata Technologies, Inc. ORDERING OPTIONS DERATING CURVE Example : CA-15- Amp Rating Mounting Nuts Configuration CA: Auto, open unit CM: Manual, open unit CDA: Auto, sealed unit CDM: Manual, sealed unit CA 15 12.5 17.5 : Leave blank for none I: Optional mounting nuts Performance characteristics are based on room temperature (77°F, 25°C). Consult derating curve for ambient temperatures significantly higher or lower than standard room temperature. Example: At 77°F (25°C) the device is calibrated to hold at 100% of rated current (1) and trip at 135% of rated current (2). At 140°F (60°C), the same device will hold at approximately 78% of rated current (3), and trip at approximately 115% of rated current (4).

Rev:10/02/18 www.sensata.com Copyright © 2018 Sensata Technologies, Inc. Sensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, evaluation and judgment in designing Buyer’s systems and products. Sensata data sheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that specifically described in the published documentation for a particular data sheet. Sensata may make corrections, enhancements, improvements and other changes to its data sheets or components without notice. Buyers are authorized to use Sensata data sheets with the Sensata component(s) identified in each particular data sheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATA SHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATA SHEETS OR USE OF THE DATA SHEETS, EXPRESS, IMPLIED OR STATUTORY , INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY , FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATA SHEETS OR USE THEREOF. All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA. Americas Flame Enterprises Contact Name: Bob Correa, Director of Product Management Direct Phone: +1 (240) 236-9802 E-mail: bcorrea@flamecorp.com info@flamecorp.com | Web Tel: 1-800-854-2255 or 1-818-700-2905 Fax: 1-818-407-5080 Peerless Electronics Contact Name: Steve Gunther, National Sales Manager Direct Phone: +1 (516) 594-3509 E-mail: sgunther@peerlesselectronics.com nysales@peerlesselectronics.com | Web Tel: 1-800-285-2121 Fax: 1-800-222-8096 Europe, Middle East & Africa Flame Enterprises Contact Name: Bob Correa, Director of Product Management Direct Phone: +1 (240) 236-9802 E-mail: bcorrea@flamecorp.com info@flamecorp.com | Web Tel: 1-800-854-2255 or 1-818-700-2905 Fax: 1-818-407-5080 CONTACT US AUTHORIZED DISTRIBUTORS AUTHORIZED SALES REPRESENTATIVES Country Representative Contact E-mail Phone Brazil Sonnensys Technologies Maury Sampaio maury.sampaio@sonnensys.com +55 12 99768 1100 Austria Telemeter Robert Jall rjall@telemeter.de 49 906 70693-26 Belgium JB Controls Jean Jacques Boher jboher@jbcontrols.com 33 (0)1 46 91 93 30 Czech Republic Telemeter Robert Jall rjall@telemeter.de 49 906 70693-26 Denmark Sensor Control Nordic Peter BJÖRKDAHL peter.bjorkdahl@scn.se 46 (0)8 122 006 92 Estonia Sensor Control Nordic Peter BJÖRKDAHL peter.bjorkdahl@scn.se 46 (0)8 122 006 92 Finland Sensor Control Nordic Peter BJÖRKDAHL peter.bjorkdahl@scn.se 46 (0)8 122 006 92 France JB Controls Jean Jacques Boher jboher@jbcontrols.com 33 (0)1 46 91 93 30 Germany Telemeter Robert Jall rjall@telemeter.de 49 906 70693-26 Greece PanSystem Stefano Vitone stefano.vitone@pansystem.com 39 335 7169958 Israel Admati Dori Shifman dori@admati.com 972 (0)50 331 4700 Italy PanSystem Stefano Vitone stefano.vitone@pansystem.com 39 335 7169958 Latvia Sensor Control Nordic Peter BJÖRKDAHL peter.bjorkdahl@scn.se 46 (0)8 122 006 92 Lithuania Sensor Control Nordic Peter BJÖRKDAHL peter.bjorkdahl@scn.se 46 (0)8 122 006 92 Luxembourg JB Controls Jean Jacques Boher jboher@jbcontrols.com 33 (0)1 46 91 93 30 Netherlands TBD Norway Sensor Control Nordic Peter BJÖRKDAHL peter.bjorkdahl@scn.se 46 (0)8 122 006 92 Poland Radiotechnika Tomasz Półtoraczyk tpoltoraczyk@radiotechnika.com.pl 48 7132 70 765 Portugal PanSystem Stefano Vitone stefano.vitone@pansystem.com 39 335 7169958 Slovakia Telemeter Robert Jall rjall@telemeter.de 49 906 70693-26 Spain PanSystem Stefano Vitone stefano.vitone@pansystem.com 39 335 7169958 Sweden Sensor Control Nordic Peter BJÖRKDAHL peter.bjorkdahl@scn.se 46 (0)8 122 006 92 Switzerland JB Controls Jean Jacques Boher jboher@jbcontrols.com 33 (0)1 46 91 93 30 Turkey Eltronik Ergn Kosem ergun@eltronik.com 90 312 440 7815 UK Charcroft Julie Protheroe julie.protheroe@charcroft.com 01591 612240 Australia AeroDefense Trent Ralph trent@aerodefence.com.au +61 7 5503 0552 China Pomic Ltd. James Cai James.cai@pomicltd.com +1 (360) 915-7806 China (ACCBs only) Shanghai Jin Feng Electronics & Inst Co Wang Min-Gang yonghuqian@vip.sina.com +86-21-62712648 India Hical Technologies VB Venkatesh venkatesh.vb@hical.com +91 98450-12341 Indonesia Precision Technologies Aaron Lim aaronlim@pretech.com.sg +65 (62) 73 45 73 x125 Japan Intertek Industries Masa Ikeda masai@intertekindustries.com +1 (310) 309-9661 Korea Aero Sensors Corp. Jonathan Jo jangcho@aerosensors.co.kr +82 2 557 5355 Malaysia Precision Technologies Aaron Lim aaronlim@pretech.com.sg +65 (62) 73 45 73 x125 New Zealand AeroDefense Trent Ralph trent@aerodefence.com.au +61 7 5503 0552 Singapore Precision Technologies Aaron Lim aaronlim@pretech.com.sg +65 (62) 73 45 73 x125 Taiwan Sensata Technologies Bob Jacques bjacques@sensata.com +1 (805) 716-0586