CD150_V01 SENSATA | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
www.sensata.com Copyright © 2018 Sensata Technologies, Inc. Measurement range 0 up to 6000 mm Output signal 0…10V (galvanic isolation) 4…20mA current loop 4…20mA current generator (galvanic isolation) 0…20mA current generator (galvanic isolation) Resolution Quasi infinite (depends on the operating system) Material Body and cover - aluminum (RohS) Measuring cable - Stainless steel Cable diameter 0,60 mm Detection element Precision potentiometer Connection Male connector M16 - DIN 8 pin Male connector M12 - 4 pin PVC cable - 4 wires Standard linearity +/- 0,15% f.s. +/- 0,10% f.s. (optional) Protection class IP54 (option IP67) Max. Velocity 10 m/s Max. Acceleration 5 m/s2 (before cable deformation) Weight ≈ 3000 g Operating temperature -20° to +80°C Storage temperature -30° to +80°C | CD150 ANALOG OUTPUT DRAW-WIRE – MEASUREMENT RANGE 0 UP TO 6000 MM SPECIFICATIONS CABLE FORCES Measurement range in mm 4000 6000 Min. pull-out force ≈ 11,00 N ≈ 10,00 N Max. pull-out force ≈ 13,50 N ≈ 13,50 N
www.sensata.com Copyright © 2018 Sensata Technologies, Inc. Page 2 DIMENSIONS All dimensions are in mm
www.sensata.com CONTACT US Americas +1 (800) 350 2727 sales.beisensors@sensata.com Europe, Middle East & Africa +33 (3) 88 20 8080 position-info.eu@sensata.com Asia Pacific sales.isasia@list.sensata.com China +86 (21) 2306 1500 Japan +81 (45) 277 7117 Korea +82 (31) 601 2004 India +91 (80) 67920890 Rest of Asia +886 (2) 27602006 ext 2808 Copyright © 2018 Sensata Technologies, Inc. Sensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, evaluation and judgment in designing Buyer’s systems and products. Sensata data sheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that specifically described in the published documentation for a particular data sheet. Sensata may make corrections, enhancements, improvements and other changes to its data sheets or components without notice. Buyers are authorized to use Sensata data sheets with the Sensata component(s) identified in each particular data sheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATA SHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATA SHEETS OR USE OF THE DATA SHEETS, EXPRESS, IMPLIED OR STATUTORY , INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY , FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATA SHEETS OR USE THEREOF. All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA. Revised 03/29/2018 Made In France Example: CD150-4000-U010-L15-K02-OP-AC-M4ORDERING OPTIONS Model CD150 Measurement range 4000 = 0 up to 4000 mm 6000 = 0 up to 6000 mm (Other ranges available on demand) Output signal U010 = 0...10V I420 = 4...20mA (current loop) I420G = 4...20mA (current generator) I020G = 0...20mA (current generator) Linearity L10 = +/- 0.10% f.s. (optional) Connection C = Male connector M16 - DIN 8 pin L4 = Male connector M12 - 4 pin K = PVC cable - 4 wires + ex: 02 for cable 2 meters long OP Options AC = Complete anodizing BR = Cleaning brush for the cable BT = Low temperature (down to -30°C) CP = Fixing of the measuring cable with a clevis IP67 = Protection class IP67 M4 = Fixing of the measuring cable with a M4 threaded rod TEV = Water evacuation holes CD150 - 4000 - U010 - L15 - K02 - OP - M4 AGENCY APPROVALS & CERTIFICATIONS