CCM02 CK-COMPONENTS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

Features

  • Operating life 500,000 cycles
  • Insertion force 40N
  • EMV
  • PCI & PCI ready
  • Card detection sealed switch Typical Applications
  • Transaction
  • Identification
  • POS Contact Electrical Data Insulation resistance 1,000 MΩ min Resistance 100 mΩ max Current rating 10 µA min / 1 A max Dielectric strength 750 Vrms min Switch Electrical Data Card detection switch Normally open Contact resistance 100 mΩ max Dielectric strength 250 Vrms min Current rating 1 mA min / 10 mA max Maximum power 0.2 VA Environmental Data Operating temperature -40°C to +85°C Damp heat IEC 512 test number 11c (10 days) Salt mist IEC 512 test number 11f (96 hours) Card detection switch Sealed against dust RoHS compliant Designation TerminationContact TypeI/O ProtectSecurity CoverTotal Height (mm) Dimension PCB version CCM02-2503LFT THT landing 6,25 38,5 X 55,6 4 clips CCM02-2504LFT SMT landing 6,25 38,5 X 55,6 4 clips CCM02-F503LFT THT friction 6,25 38,5 X 55,6 4 clips CCM02-F504LFT SMT friction 6,25 38,5 X 55,6 4 clips CCM02-F796LFT SMT friction 6,25 38,5 X 55,6 4 metal pegs CCM02 F794LFT SMT friction Yes 6,25 38,5 X 55,6 4 metal pegs CCM02-F844LFT SMT friction Yes Yes 6,6 40,5 X 58 4 metal pegs PCI Features smartCard2011_6.0.qxd:2002 CCM Catalog.qxd 5/16/11 4:05 PM Page 12

Specifications and dimensions subject to change www.ck-components.com Full Size PCI: I/O Protect Definition Special accessory in order to avoid and detect frontal access to data contact. It is electrically connected to the PCB through spring finger contacts. Process It must be in open position during the reflow soldering of the connector and has to be locked in closed position after soldering. Definition It is a multilayer cover placed over the connector to avoid and detect data contact access, especially from the top. It is connected to the PCB through 6 SMT terminals that are soldered at the same time as the other smart card terminals. Process Please contact your Sales Representative for advice and recommendations about soldering this version. PCI: Security Cover I/O Protect locking tool C&K is proposing a manual tool to lock the I/O protect accessory after soldering. smartCard2011_6.0.qxd:2002 CCM Catalog.qxd 5/16/11 4:05 PM Page 13

Dimensions are shown in mm Specifications and dimensions subject to change www.ck-components.com Full Size CCM02 Series 0,95 3,15 19,12 1014 7,7±0,3 4,15±0,3 Card entry 5,75 15,7 A A ø 0,2 A B A B 0.65 4,3±0,2 1,6 PCB Thickness 5x 2,54 0,70,3 A B 2,9±0,2 (3,2) 55,6±0,2 12,712,7 3,2 1±0,25 38,5 6,25

4 Snap

Designation & Date-Code area "CCM02" marking is optional 10x SEE DETAIL A F503T XX XX A-A Card insertion direction Contact location accordingto ISO/IEC 7816-2 DETAIL A Scale 5 19,12 21,66 24,2 26,74 29,28 31,82 1,8 3,813,81 3,2 +0,1 ø 1 0 ø 0,1 12,712,7 +0,1 (4x) ø 3,2 0 ø 0,1 C1 C2 C3 C4 C5 C6 C7 C8 SW SW RECOMMENDED PC BOARD LAYOUT (Component side) Card end travel switch terminals 10x Plastic outline (50) (38,5) (55,6) F503T XXXX CCM02-2503 LFT / CCM02-F503 LFT smartCard2011_6.0.qxd:2002 CCM Catalog.qxd 5/16/11 4:05 PM Page 14

Dimensions are shown in mm Specifications and dimensions subject to change www.ck-components.com CCM02-2504 LFT / CCM02-F504 LFT Full Size CCM02 Series Contact location according to ISO 7816-2 smartCard2011_6.0.qxd:2002 CCM Catalog.qxd 5/16/11 4:05 PM Page 15

Dimensions are shown in mm Specifications and dimensions subject to change www.ck-components.com CCM02-F796 LFT Full Size CCM02 Series 38,5 0,95 7,7±0,3 4,15±0,3 Car d entry 5,75 15,7 A A 54,3 10,3 A 5x 2,54 0.65 4,3±0,2 0,2±0,15 (3,2) 0,8 0,8 6,25 B 55,6±0,2 +0,43,2 -0,2 1±0,25 ø 1,62±0,05ø 0,2 A B 1,5 26,35±0,3 51,5 2,05

4 Metal Pegs

Designation & Date-Code area "CCM02" marking is optional 10x SEE DETAIL A F796T XX XX Pick and place area ø 13 Card insertion direction A-A DETAIL A Scale 5 2 2 1,7 2,05 8,843,813,81 1,5 1,5 3,1 18,87 21,41 23,95 26,49 29,03 31,57 51,5 1,3 0,2 +0,1 ø 1,9 0 ø 0,1 3,226,35±0,3 11,45 12,65 Contact foot area 0,8 x 1 Metallized holes C1 C2 C3 C4 C5 C6 C7 C8 SW SW RECOMMENDED PC BOARD LAYOUT (Component side) Card end travel switch terminals 0,8 x 1 Contact location according to ISO/IEC 7816-2 10x 4x Pad Plastic outline (50) (38,5) (55,6) F796T XX XX smartCard2011_6.0.qxd:2002 CCM Catalog.qxd 5/16/11 4:05 PM Page 16

Dimensions are shown in mm Specifications and dimensions subject to change www.ck-components.com CCM02-F794 LFT Full Size CCM02 Series (51,25) (38,5) (55,6) 5x 2,54 0.65 4,3 0,2 0,2 0,15 (3,2) 0,8 0,8 6.25 55,6 0,2 3,2 +0,4 -0,2 1 0,25 18,87 2,05 51,5 1,62 0,05 Metal pegs 26,35 0,3 1.5 2x 16,9 (closed position) A A 0,3 A A 0,2 A B B Embossed Channel Designation & Date-Code area "CCM02" marking is optional 0,8 x 1 14x SEE DETAIL A 2794T XX XX T4972 XX X X Contacts security (open position) C5 C6 C7 C8 Piracy switch Pick and place area Card insertion direction Card stop A-A RECOMMENDED PC BOARD LAYOUT (Component side) ISO/IEC 7816-2 DETAIL A Scale 5 38,5 0,95 0,3 Card entry4,15 5,75 15,7 3,2 26,35 0.3 3,813,81 1,5 1,5 3,1 1,3 3,24 12,65 11,45 1,9 +0,1 00,2 0,1 Card end travel switch terminals 0,8 x 1 Contact foot area Contacts security Metallized holes (4x) C1C2C3C4 C5C6C7C8 SWSW Contact location according to (14x) Pad Plastic outline 7 8 , 81 14,1 2 5 9 , 3 2 9 4 , 62 3 0 , 9 2 7 5 , 1 3 1,7 5,1 5 smartCard2011_6.0.qxd:2002 CCM Catalog.qxd 5/16/11 4:05 PM Page 17

Dimensions are shown in mm Specifications and dimensions subject to change www.ck-components.com CCM02-F844a LFT / CCM02-F844b LFT CCM02 Series Full Size 0,95 A A (5x) 2,54 0,7 4,3±0,2 0,2±0,15 +0,43,2 -0,2 0,8 0,8 01,6 -0,1 51,5 A 18,87 2,05 (14x) 10,3 A 16,9 (closed position) 45º metal peg Ø 1,62 ± 0,05 (4x) Ø 0.2 A B 58±0,3 0,2±0,110 14B 3,6±0,3 Card entry 15,7 1±0,25 26,35±0,3 Embossed Channel Labelling : Designation & Date-Code area SEE DETAIL B Contacts security (closed position) (4x) DETAIL B Scale 5 Card entry Card stop A-A F844T xx xx 1,7 1,27 1,27 3,813,81 1,5 1,5 3,1 1,3 0,2 3,24 12,6511,45 (6x) 1,3 0,05 Ø 1,9 metallized holes (4x) Ø 0,1 A 9,7 37,2 51,5 10,5 18,87 21,41 23,95 26,49 29,03 31,57 (6x) 1,5 0,05 38,8 3,81 11,3 Contact foot area P2 P4 Protection cover terminals Please don't apply any solder paste on these 4 pads C1 C2 C3 C4 C5 C6 C7 C8 SWSW RECOMMENDED PC BOARD LAYOUT (Component side) Plastic outline metallized holes (4x) Contact location according to ISO/IEC 7816-2 Card end travel switch terminals (50) (58) (40,5) Card insertion direction Scale 1 Card insertion direction F844Txx xx P4P2 C5 C6 C7 C8 \\Piracyswitch \\ smartCard2011_6.0.qxd:2002 CCM Catalog.qxd 5/16/11 4:05 PM Page 18