CCM02-2503 CK-COMPONENTS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

  • 500,000 card insertion cycles.
  • The contacts do not touch the card until it is almost fully inserted – A minimal wiping action removes any non-conductive material.
  • The connector has been designed to give a positive indication once the card has been fully inserted.
  • The reduced size of the contact base saves PCB space, making the connector more stable during surface mounting, and creates an air gap between the contacts and card entry slot, which reduces the risk of an electrostatic transfer to the PCB.
  • For added reliability, the integrated card end-travel switch, which is normally open, is sealed against dust and grit.
  • By using an inlay finish in the contact area, the life of the precious metal is extended by more than 10 times that of standard gold plating.
  • The contact area is spooned to reduce the risk of accidental (or deliberate) damage and to optimize the electrical connection with the card.
  • Snap-locks underneath the molding position and hold the connector on the PCB, and give additional support to the contact terminals.
  • The plastic moldings are made from a high temperature thermoplastic suited for infrared and convection soldering processes. EMVTM is a trademark owned by EMVCoLLC. Part Number Number of Termination PCB Packaging Contacts Tails Design Locating Multiple CCM02-2503 8 Through Hole 4 Board Lock (PCB 1.6 mm thick) 300 CCM02-2504 8 SMT 4 Board Lock (PCB 1.6 mm thick) 300 CCM02-2508 8 SMT 2 Pegs 300 CCM02-2511 8 Through Hole 4 Pegs 300 CCM02-2512 8 SMT 4 Pegs 300 CCM02-2758 8 SMT 2 Pegs (without cover) 300 CCM02-2763 8 SMT 4 Board Lock + 2 Pegs 300 CCM02-2765 8 Through Hole 4 Board Lock (PCB 1mm thick) 300 CCM02-2766 8 SMT 4 Board Lock (PCB 1mm thick) 300 Construction Mechanical Data Contact Electrical Data Switch Electrical Data Environmental Data Ordering Code Packaging EMVTM compatible

Dimensions are shown in mm Dimensions subject to change www.ittcannon.com Dimensional Drawings A A (REF .)50 38,5 ø0,2 A B A 0,95 3,15 19,12 B 7,7±0,3 Card entry4,15±0,3 5,75 15,7 1±0,25 (REF .)38,5 (REF .)55,6 10,3 A 54,3 5x 2,54 0,65 1,8 4,3±0,2 0,2±0,15 13,8 (REF .) (REF .)3,2 0,8 0,8 1,6 PCB Thickness 6,25 55,6 ±0,2

4 Snap

ø13 Designation & Date-Code area "CCM02" marking is optional COUPE A-A Card insertion direction Card stop DETAIL A PCB Layout 27,6 0-0,6 3,2 1,8 19,12 21,66 24,2 26,74 29,28 31,82 25,3 1,7 3,813,81 ø3,2 +0,1 0ø0,1 1,5 1,5 3,1 8,84 1,3 0,2 Card end travel switch terminals 0,8 x 1 Contact foot area 0,8 x 1 C1 C2 C3 C4 C5 C6 C7 C8 SW SW (Component side) Contact location according to ISO 7816-2 10x 4x Pad Plastic outline CCM02-2504 (8 contacts SMT - 4 board lock) CCM02-2504 (8 contacts SMT - 4 board lock) CCM02 MK II Unless otherwise stated, tolerances are ± 0,10 mm Drawings shown for reference only. For other part numbers please consult your local Cannon Customer Service Center.