CCM01-2064 CK-COMPONENTS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

  • Available with 8 contacts which are designed to give a consistently reliable normal force over the life of the connector.
  • For added reliability, the card detection switch (which is normally open) is sealed against dust and debris.
  • Available with through-hole or surface mount contact termination and its light- weight design means that the connector can be automatically pick-and-placed.
  • The moldings are made from high temperature thermoplastics suited for infrared and convection soldering processes.
  • Plastic springs in the cover give a positive feel as the card is fully inserted. In case of special version with low card insertions and withdrawal, then the CCM connector is supplied without this spring effect.
  • The reduced size of the contact base saves PCB space, making the connector more stable during soldering. This creates an air gap between the contacts and card entry slot which reduces the risk of an electrostatic transfer to the PCB.
  • By using an inlay finish in the contact area, the life of the precious metal is extended by more than 10 times that of standard gold plating.
  • A chamfered opening to the card entry slot improves the card guidance into the connector.
  • The contact area is spooned to reduce the risk of accidental (or deliberate) damage and to optimize the electrical connection with the card.
  • Robustly formed printed circuit tails allow a coplanarity of ± 0.05 mm to be maintained. EMVTM is a trademark owned by EMVCoLLC. Part Number Number Termination Retention Packaging of Contacts Tail Design Force Multiple CCM01-2064 8 THT w/board lock <10N 300 CCM01-2065 8 SMT w/board lock <10N 300 CCM01-2251 8 SMT <10N 300 CCM01-2253 8 SMT <4N 300 CCM01-2255 8 Through-hole <4N 300 Construction Mechanical Data Contact Electrical Data Switch Electrical Data Environmental Data Ordering Code Packaging EMVTM compatible

A A (REF .)50,2 10,3 A 3x 2,54 36,2 4,15±0,3 Card entry 8±0,3 (REF .)55,6 (REF .)36,2 54,3 55,6 ±0,2 0,65 4,4±0,2 7,67,6 9,6 ±0,1 15,520 0,9±0,25 5,8 6,3 0,70,3 A 0,8 0,85 (REF .)9,6 0,1 0-0,1 (REF .)7,6 ø0,2 A B 19,12 1,8 3,15 1,6 PCB Thickness 14 10

4 Snap

Designation & Date-Code area Card stop 8x Pick and place area ø13 SEE DETAIL A A-A DETAIL A A PCB Layout 1,8 3,813,81 2,64 15,2 9,6 19,12 21,66 24,2 26,74 29,74 33,74 12,9 1,51,5 9,2 2 (Component side) Card end travel switch terminals 0,85 x 0,7 Contact foot area 0,8 x 1 4x10x C1 C2 C3 C4 C5 C6 C7 C8 SW SW Contact location according to ISO 7816-2 Plastic outline Pad CCM01-2065 (8 contacts SMT with board lock) Drawings shown for reference only. For other part numbers please consult your local Cannon Customer Service Center. Unless otherwise stated, tolerances are ± 0,10 mm CCM01-2065 Dimensions are shown in mm Dimensions subject to change www.ittcannon.com