DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 11

Technical content

Subject to change without notice. www.cree.com/ledlamps Data Sheet: CLD-CT1163.002

FEATURES

  • Size (mm): 5.5 x 5.5
  • Dominant Wavelength (nm): Red (619-624 ) Green (520-540) Blue (460-480)
  • Luminous Intensity (mcd) Red (560 - 1120) Green (1120 - 2240) Blue (280 - 560)
  • Water-Resistant (IPX5*)
  • Moisture Sensitivity Level: 3
  • Lead-Free
  • RoHS Compliant

APPLICATIONS

  • Outdoor Full-Color Video Screen
  • Decorative lighting
  • Amusement Cree® PLCC6 3 in 1 SMD LED CLV6A-FKB Data Sheet These SMD LEDs are packaged in an industry standard PLCC6 package. These high performance tricolor SMT LEDs are designed to work in a wide range of applications. A wide viewing angle and high brightness make these LEDs suitable for outdoor signage applications. The encapsulation resin contains UV inhibitors to minimize the effects of long-term exposure to direct sunlight, resulting in stable light output over the life of the LED. * This part is tested under the condition of assembling it on a PCB with isolating the electrical path by silicone.

2 CLD-CT1163.002 Cree, Inc.

4600 Silicon Drive

Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Absolute Maximum Ratings (TA = 25°C) Items Symbol Absolute Maximum Rating Unit R G B Forward Current Note 1 IF 50 35 35 mA Peak Forward Current Note 2 IFP 200 100 100 mA Reverse Voltage VR 5 5 5 V Power Dissipation PD 130 140 140 mW Operation Temperature Topr -40 ~ +100 °C Storage Temperature Tstg -40 ~ +100 °C Junction Temperature TJ 110 110 110 °C Junction/ambient 1 chip on RTHJA 450 400 450 °C/W Junction/ambient 3 chips on RTHJA 650 580 680 °C/W Junction/solder point 1 chip on RTHJS 230 230 200 °C/W Junction/solder point 3 chips on RTHJS 230 230 200 °C/W Electrostatic Discharge Classification(MIL-STD-883E) ESD 1000 V Note: 1. Single-color light. 2. Pulse width ≤0.1 msec, duty ≤1/10. Typical Electrical & Optical Characteristics (TA = 25°C) Characteristics Condition Symbol Values Unit R G B Wavelength at peak emission IF = 20 mA λPEAK 630 527 470 nm Dominant Wavelength IF = 20 mA λDOM 619~624 520~540 460~480 nm Spectral bandwidth at 50% IREL max IF = 20 mA Δ λ 24 38 28 nm Viewing Angle at 50% IV IF = 20 mA 2θ½ 120 120 120 deg Forward Voltage IF = 20 mA VF(avg) 2.0 3.2 3.2 V VF(max) 2.6 4.0 4.0 V Luminous Intensity IF = 20 mA IV(min) 560 1120 280 mcd IV(avg) 700 1600 400 mcd Reverse Current (max) VR = 5 V IR 10 10 10 μA

3 CLD-CT1163.002 Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Intensity Bin Limit (IF = 20 mA) Color Bin Limit (IF = 20 mA)

  • Tolerance of measurement of luminous intensity is ±10%
  • Tolerance of measurement of dominant wavelength is ±1 nm Red Bin Code Min.(nm) Max.(nm) RB 619 624 Green Bin Code Min.(nm) Max.(nm) G7 520 525 G8 525 530 G9 530 535 Ga 535 540 Red Bin Code Min. (mcd) Max. (mcd) K 560 710 M 710 900 N 900 1120 Green Bin Code Min. (mcd) Max. (mcd) P 1120 1400 Q 1400 1800 R 1800 2240 Blue Bin Code Min. (mcd) Max. (mcd) G 280 355 H 355 450 J 450 560 Blue Bin Code Min.(nm) Max.(nm) B3 460 465 B4 465 470 B5 470 475 B6 475 480

4 CLD-CT1163.002 Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Order Code Table* Kit Number Color Luminous Intensity (mcd) Dominant Wavelength (nm) Package Min. Max. Color Bin Min. (nm) Color Bin Max. (nm) CLV6A-FKB-CKNPRGJBB7a363 Red 560 1120 RB 619 RB 624 Reel Green 1120 2240 G7 520 Ga 540 Reel Blue 280 560 B3 460 B6 480 Reel CLV6A-FKB-CK1P1G1BB7R3R3 Red Any 1 Intensity bin from K(560) - N(1120) RB 619 RB 624 Reel Green Any 1 Intensity bin from P(1120) - R(2240) Any 1 hue bin from G7(520) - Ga(540) Reel Blue Any 1 Intensity bin from G(280) - J(560) Any 1 hue bin from B3(460) - B6(480) Reel CLV6A-FKB-CM1Q1H1BB7R3R3 Red Any 1 Intensity bin from M(710) - N(1120) RB 619 RB 624 Reel Green Any 1 Intensity bin from Q(1400) - R(2240) Any 1 hue bin from G7(520) - Ga(540) Reel Blue Any 1 Intensity bin from H(355) - J(560) Any 1 hue bin from B3(460) - B6(480) Reel Notes: 1. The above kit numbers represent the order codes which include multiple intensity-bin and color-bin codes. Only one intensity-bin code and one color-bin code will be shipped on each reel. Single intensity-bin code and single color- bin code will be orderable in certain quantities. 2. For example, any 1 intensity-bin from K - N means only 1 intensity-bin (K or M or N) will be shipped by Cree. 3. For example, any 1 color-bin from G7 - Ga means only 1 color-bin (G7 or G8 or G9 or Ga) will be shipped by Cree. 4. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions. 5. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely.

5 CLD-CT1163.002 Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Graphs The above data are collected from statistical figures that do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice.

6 CLD-CT1163.002 Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Graphs The above data are collected from statistical figures that do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice.

7 CLD-CT1163.002 Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Notes RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Direc- tive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. Mechanical Dimensions All dimensions are in mm.

8 CLD-CT1163.002 Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Kit Number System Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner:

9 CLD-CT1163.002 Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Reliability Tests and Results Test Applicable Standards Test Condition Note Number of Damaged Temperature Cycle JEITA ED-4701 100 105 30 mins, 5 mins, 30 mins, 5 mins 100 cycles 0/45 Thermal Shock MIL-STD-202G -40°C~100°C 30 mins, 30 mins 100 cycles 0/45 Moisture Resistance JEITA ED-4701 200 203 25°C~65°C~ 90%RH 24hrs/1cycle 10 cycles 0/45 High Temperature Storage JEITA ED-4701 200 201 TA=100°C 500 hrs 0/45 Temperature Humidity Storage JEITA ED-4701 100 103 TA=60°C RH=90% 500 hrs 0/45 Low Temperature Storage JEITA ED-4701 200 202 TA=-40°C 500 hrs 0/45 Water Proof Test* IEC 60529:2001 IP X5 Water flow rate 12.5 l/min 15min 0/45 High Temperature Life Test - TA=85°C IF=15 mA 1000 hrs 0/45 Life Test - TA=25°C IF: R=30mA G=35mA B=20mA 1000 hrs 0/45 High Humidity Heat Life Test - 60°C RH=90% IF=15 mA 500 hrs 0/45 Low Temperature Life Test - Ta=-40°C IF: R=30mA G=35mA B=20mA 500 hrs 0/45 Resistance to Soldering Heat(Reflow Soldering) JEITA ED-4701 300 301 Tsol=260°C,10sec (Pre treatment 30°C,70%,168hrs) 2 times 0/45 Vibration-variable Frequency MIL-STE-883 Method 2007 20G min, 20 to 2000Hz, 4cycles, 4mins, Each x,y,z / 0/45 Electrostatic Discharge Test AEC(Q101-001) Human body model 1000 V (Forward and reverse current conduct electricity each 1time) / 0/45 Water proof test*: The test is conducted on component level. It is strongly recommended the customers test the products for their application Failure Criteria Item Symbol Test Condition Criteria for Judgment Min. Max. Forward Voltage VF IF = 20 mA – Initial Data x 1.1 Reverse Current IR VR = 5 V - 100 μA Luminous Flux/Intensity ФV IF = 20 mA Initial Data x 0.7 - Resistance to Soldering Heat - IF = 20 mA No dead lamps and visual damage Vibration-variable Frequency - IF = 20 mA No dead lamps and visual damage

10 CLD-CT1163.002 Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Reflow Soldering

  • The CLV6A-FKB is rated as a MSL 3 product.
  • The recommended floor life out of bag is 24hrs.
  • The best practices suggestion is to use the product as soon as possible when removed from the bag.
  • The temperature (Top surface of SMD LED) profile is as below: Use only with CLV6A-FKB Soldering pad: Solder = Low Lead-Free Average ramp-up rate = 4ºC/s max Preheat temperature = 150ºC ~200ºC Preheat time = 120s max Ramp-down rate = 6ºC/s max Peak temperature = 235ºC max Time within 5ºC of actual Peak Temperature = 10s max Duration above 217ºC is 45s max Document No.: COTCO-05-0057 Rev. NO. : 13 Melting-point Pre-heat Soak Reflow Cooling Time Temperature Use all SMD besides LP6-NPP1-01-N1 Solder = Sn63-Pb37 Solder = Lead-free Average ramp-up rate = 4ºC/s max. Average ramp-up rate = 4ºC/s max Preheat temperature = 100ºC ~150ºC Preheat temperature = 150ºC ~200ºC Preheat time = 100s max. Preheat time = 100s max. Ramp-down rate = 6ºC/s max. Ramp-down rate = 6ºC/s max. Peak temperature = 230ºC max. Peak temperature = 250ºC max. Time within 5ºC of actual Peak Temperature = 10s max. Time within 5ºC of actual Peak Temperature = 10s max. Duration above 183ºC is 80s max. Duration above 217ºC is 80s max. Only use LP6-NPP1-01-N1 [13] Solder = Low Lead-free Average ramp-up rate = 3ºC/s max. Preheat temperature = 130ºC ~170ºC Preheat time = 120s max. Ramp-down rate = 6ºC/s max. Peak temperature = 213ºC max. Time within 3ºC of actual Peak Temperature = 25s max. Duration above 200ºC is 40s max. Recommended solder pad design for heat dissipation (2-pin SMD LED): 0.5 7.5 7.0 4.5 2.6 1.5  Recommended solder pad design for heat dissipation (4-pin SMD LED) 8.2 1.71.31.7 0.475 5.65 2.7

11 CLD-CT1163.002 Cree, Inc. Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. Package

  • The boxes are not water resistant and they must be kept away from water and moisture.
  • The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags.
  • Cardboard boxes will be used to protect the LEDs from mechanical shocks during transportation.
  • The reel pack is applied in SMD LED.
  • Max 900 pcs per reel. 防潮珠。不可食