DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 9
Technical content
Type: CC45 [SL characteristics, Edc: 1kV to 6kV] Disc Type Capacitors with Lead High Voltage Ceramic Capacitors CC45 series Commercial Grade, Low dissipation at high frequency
(2/9) 20160219 / leaddisc_commercial_cc45_en.fm CAPACITORS REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using these products. Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and product temperature does not exceed 150°C. Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set therm al design. Do not use for a purpose outside of the contents regulated in the delivery specifications. The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in the each catalog, please contact us. (1) Aerospace/Aviation equipment (2) Transportation equipment (cars, electric trains, ships, etc.) (3) Medical equipment (4) Power-generation control equipment (5) Atomic energy-related equipment (6) Seabed equipment (7) Transportation control equipment (8) Public information-processing equipment (9) Military equipment (10) Electric heating apparatus, burning equipment (11) Disaster prevention/crime prevention equipment (12) Safety equipment (13) Other applications that are not considered general-purpose
applications
Please refer to the guideline of notabilia for fixed ceramic capacitors issued by JEITA(Japan Electronics and Information Technology Association, EIAJ RCR-2335). When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection circuit/device or providing backup circuits in your equipment. REMINDERS
(3/9) 20160219 / leaddisc_commercial_cc45_en.fm Please be sure to request delivery specifications that provide further details on the features and specifications of the produc ts for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. CAPACITORS Disc Type Capacitors with Lead High Voltage Ceramic Capacitors, Commercial Grade, Low dissipation at high frequency
FEATURES
Low dissipation factor, and decreased self-heating temperature in the high frequency, and high voltage application. The rated voltage of 6kV series have been added the rated voltage of 3kV series. These products shall conform to RoHS Directive due to lead(Pb) free of lead wire and internal solder material. Compatible with halogen-free external resin coating. APPLICATION For use in snubber circuit protection for power supplies PART NUMBER CONSTRUCTION /g13 Please refer to P-5~8 about the product dimensions. OPERATING TEMPERATURE RANGE /g13/g3The maximum operating temperature of 125°C includes capacitor self-generated heat of up to 20°C. /g13/g13/g3The storage temperature range applies to after MLCC is mounted on board. PACKAGE QUANTITY Overview of CC45 Series CC45 SL 3AD 101 J Y ˘ NA Series name/g13 Temperature characteristics Rated voltage Nominal capacitance Capacitance tolerance Class Lead type Application classification Internal code SL +350 to –1000ppm/°C 3AD 1kV 030 3pF C ±0.25pF G Long lead N General use A Halogen-free 3DD 2kV 220 22pF D ±0.5pF N Short lead 3FD 3kV 471 470pF J ±5% V Taping 3JD 6kV Temperature characteristics Temperature range/g13 Operating temperature ʢ°Cʣ Storage temperature/g13/g13 ʢ°Cʣ SL –25 to +125 –25 to +125 Type Package quantity Taping (pieces / box) Bulk (pieces / bag) CC45 1000 1000 Product compatible with RoHS directive Halogen-free RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://product.tdk.com/en/environment/rohs/ Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br conte nt is less than 1500ppm.
(4/9) 20160219 / leaddisc_commercial_cc45_en.fm Please be sure to request delivery specifications that provide further details on the features and specifications of the produc ts for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. CAPACITORS Overview of CC45 Series RECOMMENDED FLOW PROFILE Preheating Peak Natural cooling Temp. Time Temp. Time Time T1 t1 T2 t2 t3 110°C min. 30 to 60s. 260°C Within 10s. Over 60s. Natural cooling Preheating Soldering t: Time t1 t2 t3 T: Temperature
(5/9) 20160219 / leaddisc_commercial_cc45_en.fm Please be sure to request delivery specifications that provide further details on the features and specifications of the produc ts for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. CAPACITORS CC45 Type CAPACITANCE AND DIMENSIONS Temperature Characteristics: SL (+350 to –1000ppm/°C) Rated Voltage Edc: 1kV * The part numbers are TDK’s standard specification products. /g13/g13 The " ˘ " of the Part Number contains the lead type, G, N or V. Please refer to the details of each shape is shown below. /g13/g13/g13/g3Please refer to P-9 about the taping dimemsions. LIST OF STANDARD LEAD SHAPES Dimemsions in mm
- TDK’s standard product is vertical kink.
- TDK’s recommendation is short lead type with the symbol N for bulk products. Capacitance (pF) Capacitance tolerance Dimensions (mm) Taping dimensions/g13/g13/g13Part No./g13 D max. T max. F (Applied to bulk) F (Applied to taping) d Symbol G Bulk/Long lead Symbol N Bulk/Short lead Symbol V Taping Vertical kink 25min. 4max. D F d T 5±1 4max. D T F d +1.5 –0.5 4max. D T F d
(6/9) 20160219 / leaddisc_commercial_cc45_en.fm Please be sure to request delivery specifications that provide further details on the features and specifications of the produc ts for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. CAPACITORS CC45 Type CAPACITANCE AND DIMENSIONS Temperature Characteristics: SL (+350 to –1000ppm/°C) Rated Voltage Edc: 2kV * The part numbers are TDK’s standard specification products. /g13/g13 The " ˘ " of the Part Number contains the lead type, G, N or V. Please refer to the details of each shape is shown below. /g13/g13/g13/g3Please refer to P-9 about the taping dimemsions. LIST OF STANDARD LEAD SHAPES Dimemsions in mm
- TDK’s standard product is vertical kink.
- TDK’s recommendation is short lead type with the symbol N for bulk products. Capacitance (pF) Capacitance tolerance Dimensions (mm) Taping dimensions/g13/g13/g13Part No./g13 D max. T max. F (Applied to bulk) F (Applied to taping) d Symbol G Bulk/Long lead Symbol N Bulk/Short lead Symbol V Taping Vertical kink 25min. 4max. D F d T 5±1 4max. D T F d +1.5 –0.5 4max. D T F d
(7/9) 20160219 / leaddisc_commercial_cc45_en.fm Please be sure to request delivery specifications that provide further details on the features and specifications of the produc ts for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. CAPACITORS CC45 Type CAPACITANCE AND DIMENSIONS Temperature Characteristics: SL (+350 to –1000ppm/°C) Rated Voltage Edc: 3kV * The part numbers are TDK’s standard specification products. /g13/g13 The " ˘ " of the Part Number contains the lead type, G, N or V. Please refer to the details of each shape is shown below. /g13/g13/g13/g3Please refer to P-9 about the taping dimemsions. LIST OF STANDARD LEAD SHAPES Dimemsions in mm
- TDK’s standard product is vertical kink.
- TDK’s recommendation is short lead type with the symbol N for bulk products. Capacitance (pF) Capacitance tolerance Dimensions (mm) Taping dimensions/g13/g13/g13Part No./g13 D max. T max. F (Applied to bulk) F (Applied to taping) d Symbol G Bulk/Long lead Symbol N Bulk/Short lead Symbol V Taping Vertical kink 25min. 4max. D F d T 5±1 4max. D T F d +1.5 –0.5 4max. D T F d
(8/9) 20160219 / leaddisc_commercial_cc45_en.fm Please be sure to request delivery specifications that provide further details on the features and specifications of the produc ts for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. CAPACITORS CC45 Type CAPACITANCE AND DIMENSIONS Temperature Characteristics: SL (+350 to –1000ppm/°C) Rated Voltage Edc: 6kV * The part numbers are TDK’s standard specification products. /g13/g13 The " ˘ " of the Part Number contains the lead type, G, N or V. Please refer to the details of each shape is shown below. /g13/g13/g13/g3Please refer to P-9 about the taping dimemsions. LIST OF STANDARD LEAD SHAPES Dimemsions in mm
- TDK’s standard product is vertical kink.
- TDK’s recommendation is short lead type with the symbol N for bulk products. Capacitance (pF) Capacitance tolerance Dimensions (mm) Taping dimensions/g13/g13/g13Part No./g13 D max. T max. F (Applied to bulk) F (Applied to taping) d Symbol G Bulk/Long lead Symbol N Bulk/Short lead Symbol V Taping Vertical kink 25min. 4max. D F d T 5±1 4max. D T F d +1.5 –0.5 4max. D T F d
(9/9) 20160219 / leaddisc_commercial_cc45_en.fm Please be sure to request delivery specifications that provide further details on the features and specifications of the produc ts for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. CAPACITORS CC45 Type TAPING DIMEMSIONS AMMO PACK INNER BOX SIZE Item Symbol Dimensions(mm) RemarksV1 V2 Body diameter D Depends on the specification of each product. Body thickness T Depends on the specification of each product. Lead-wire diameter ød 0.6±0.05 0.6±0.05 Pitch of component P 12.7±1.0 15.0±1.0 Including the slant of body Feed hole pitch P 0 12.7±0.3 15.0±0.3 Excepting the tape splicing part Feed hole center to lead P1 3.85±0.7 3.75±0.7 Feed hole center to component center P 2 6.35±1.3 7.5±1.3 Lead-to lead distance F 5+0.8, –0.2 7.5±0.8 Measuring point is bottom kink Component alignment /g39h 0±2.0 0±2.0 Including the slanting body due to bending lead-wire Adhesive tape width W0 10.0min. 10.0min. Hole position W1 9.0±0.5 9.0±0.5 Adhesive tape position W2 4.0max. 4.0max. Adhesive tape do not stick out the tape Height of body from tape center H 1 46.0max. 46.0max. Lead-wire protrusion 1.0max. 1.0max. Feed hole diameter D0 4.0±0.2 4.0±0.2 Total tape thickness t 0.6±0.3 0.6±0.3 Including adhesive tape Length of snipped lead L 11.0max. 11.0max. Coating on lead C 4.0max. 4.0max. Height of kink A 4.0max. 4.0max. Measuring point is bottom kink Spring action S 2.0max. 2.0max. P D ød A W T Δh Δh S H0 C L t W0 W2 F P1 V1, V2 340max. 60max. 320max. Dimensions in mm
- For more information about products with other capacitance or other data, please contact us.