CC430F6125IRGC

CC430F613X TI | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 118

Technical content

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailable CC430F613x CC430F612x CC430F513x www.ti.com SLAS554D –MAY 2009–REVISED JULY 2010 MSP430SoCwithRFCore 1FEATURES

• True System-on-Chip (SoC) forLow-Power • High-PerformanceSub-1-GHz RF Transceiver WirelessCommunication Applications Core
• Wide Supply VoltageRange: 1.8V to3.6V – Same as inCC1101
• UltralowPower Consumption: – Wide Supply VoltageRange: 2.0V to3.6V – CPU ActiveMode (AM):160 µA/MHz – Frequency Bands: 300 MHz to348 MHz, 389 MHz to464 MHz, and 779 MHz to– Standby Mode (LPM3 RTC Mode):2.0µA 928 MHz– OffMode (LPM4 RAM Retention):1.0µA – Programmable Data Rate From 0.6kBaud– Radio inRX: 15 mA, 250 kbps,915 MHz to500 kBaud• MSP430 ™ System and Peripherals – High Sensitivity(–117 dBm at0.6kBaud,– 16-BitRISC Architecture,Extended -111dBm at1.2kBaud, 315 MHz, 1% PacketMemory, up to20-MHz System Clock ErrorRate) – Wake-Up From Standby Mode inLess – ExcellentReceiverSelectivityand BlockingThan 6 µs Performance – FlexiblePower Management System with – Programmable Output Power Up to+12SVS and Brownout dBm forAllSupported Frequencies – UnifiedClock System withFLL – 2-FSK,2-GFSK, and MSK Supported as well – 16-BitTimer TA0, Timer_A withFive as OOK and FlexibleASK Shaping Capture/Compare Registers – FlexibleSupport forPacket-Oriented – 16-BitTimer TA1, Timer_A withThree Systems: On-Chip Support forSync Word Capture/Compare Registers Detection,Address Check, FlexiblePacket – Hardware Real-TimeClock Length,and Automatic CRC Handling – Two UniversalSerialCommunication – Support forAutomatic ClearChannel Interfaces Assessment (CCA) BeforeTransmitting(for Listen-Before-TalkSystems)– USCI_A0 supportingUART, IrDA,SPI – DigitalRSSI Output– USCI_B0 supportingI2C, SPI – SuitedforSystems TargetingCompliance– 12-BitA/D ConverterWith Internal With EN 300 220 (Europe)andReference,Sample-and-Hold,and Autoscan FCC CFR Part15 (US)Features(OnlyCC430F613x and CC430F513x) – SuitedforSystems TargetingCompliance With WirelessM-Bus Standard EN– Comparator 13757-4:2005– IntegratedLCD DriverWith Contrast – Support forAsynchronous andControlforup to96 Segments (Only Synchronous SerialReceive/TransmitModeCC430F61xx) forBackward CompatibilityWith Existing– 128-bitAES SecurityEncryption/Decryption Radio Communication ProtocolsCoprocessor
• FamilyMembers areSummarized inTable1.– 32-BitHardware Multiplier
• For Complete Module Descriptions,See the– Three-ChannelInternalDMA CC430 FamilyUser'sGuide (SLAU259 ).– SerialOnboard Programming, No External Programming VoltageNeeded – Embedded EmulationModule (EEM) Pleasebe aware thatan importantnoticeconcerningavailability,standardwarranty,and use incriticalapplicationsofTexas Instrumentssemiconductorproductsand disclaimerstheretoappearsattheend ofthisdatasheet. PRODUCTION DATA informationiscurrentas ofpublicationdate. Copyright© 2009–2010,Texas InstrumentsIncorporatedProductsconform to specificationsper the terms of the Texas Instrumentsstandardwarranty.Productionprocessingdoes not necessarilyincludetestingofallparameters.

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailableCC430F613x CC430F612x CC430F513x SLAS554D –MAY 2009–REVISED JULY 2010 www.ti.com

DESCRIPTION

The Texas InstrumentsCC430 familyof ultralow-powermicrocontrollersystem-on-chipwith integratedRF transceivercoresconsistsofseveraldevicesfeaturingdifferentsetsofperipheralstargetedfora wide range of applications.The architecture,combined withfivelow-powermodes isoptimizedtoachieveextendedbatterylife in portablemeasurement applications.The devicefeaturesthe powerfulMSP430 ™ 16-bitRISC CPU, 16-bit registers,and constantgeneratorsthatcontributetomaximum code efficiency. The CC430 familyprovidesa tightintegrationbetween themicrocontrollercore,itsperipherals,software,and the RF transceiver,making thesetruesystem-on-chipsolutionseasy touse as wellas improvingperformance. The CC430F61xx seriesaremicrocontrollersystem-on-chipconfigurationscombiningtheexcellentperformance ofthestate-of-the-artCC1101 sub-1-GHz RF transceiverwiththeMSP430 CPUXV2, up to32 kB ofin-system programmableflashmemory, up to4 kB ofRAM, two 16-bittimers,a high-performance12-bitA/D converterwith eightexternalinputsplus internaltemperatureand batterysensors on CC430F613x devices,comparator, universalserialcommunicationinterfaces(USCI),128-bitAES securityaccelerator,hardware multiplier,DMA, real-timeclockmodule withalarmcapabilities,LCD driver,and up to44 I/Opins. The CC430F513x seriesaremicrocontrollersystem-on-chipconfigurationscombiningtheexcellentperformance ofthestate-of-the-artCC1101 sub-1-GHz RF transceiverwiththeMSP430 CPUXV2, up to32 kB ofin-system programmableflashmemory, up to4 kB ofRAM, two 16-bittimers,a highperformance12-bitA/D converterwith sixexternalinputsplusinternaltemperatureand batterysensors,comparator,universalserialcommunication interfaces(USCI),128-bitAES securityaccelerator,hardwaremultiplier,DMA, real-timeclockmodule withalarm capabilities,and up to30 I/Opins. Typicalapplicationsforthesedevicesincludewirelessanalogand digitalsensorsystems,heatcostallocators, thermostats,metering(AMR/AMI),smartgridwirelessnetworksetc. Familymembers availablearesummarized inTable1. Forcompletemodule descriptions,see theCC430 FamilyUser's Guide,literaturenumber SLAU259 . Table1.FamilyMembers USCI Channel ChannelProgram SRAM Timer_A ADC12_A PackageDevice LCD_B (2) Comp_B I/OA: B:(KB) (KB) (1) (2) Type UART/LIN SPI/I2C /IrDA/SPI 8 ext/CC430F6137 32 4 5,3 96 seg 1 1 8 ch. 44 64 RGC4 intch. 8 ext/CC430F6135 16 2 5,3 96 seg 1 1 8 ch. 44 64 RGC4 intch. CC430F6127 32 4 5,3 96 seg 1 1 n/a 8 ch. 44 64 RGC CC430F6126 32 2 5,3 96 seg 1 1 n/a 8 ch. 44 64 RGC CC430F6125 16 2 5,3 96 seg 1 1 n/a 8 ch. 44 64 RGC 6 ext/CC430F5137 32 4 5,3 n/a 1 1 6 ch. 30 48 RGZ4 intch. 6 ext/CC430F5135 16 2 5,3 n/a 1 1 6 ch. 30 48 RGZ4 intch. 6 ext/CC430F5133 8 2 5,3 n/a 1 1 6 ch. 30 48 RGZ4 intch. (1) Each number inthesequence representsan instantiationofTimer_A withitsassociatednumber ofcapturecompare registersand PWM outputgeneratorsavailable.Forexample,a number sequence of5,3 wouldrepresenttwo instantiationsofTimer_A,thefirst instantiationhaving5 and thesecond instantiationhaving3 capturecompare registersand PWM outputgenerators,respectively. (2) n/a:notavailable.

2 SubmitDocumentationFeedback Copyright© 2009–2010,Texas InstrumentsIncorporated

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailable CC430F613x CC430F612x CC430F513x www.ti.com SLAS554D –MAY 2009–REVISED JULY 2010 ORDERING INFORMATION (1) PACKAGED DEVICES (2) TA PLASTIC 64-PINQFN (RGC) PLASTIC 48-PINQFN (RGZ) CC430F6137IRGC CC430F5137IRGZ CC430F6135IRGC CC430F5135IRGZ –40°C to85°C CC430F6127IRGC CC430F5133IRGZ CC430F6126IRGC CC430F6125IRGC (1) Forthemost currentpackage and orderinginformation,see thePackage OptionAddendum attheend ofthisdocument,orsee theTIweb siteatwww.ti.com. (2) Package drawings,thermaldata,and symbolizationareavailableatwww.ti.com/packaging. Copyright© 2009–2010,Texas InstrumentsIncorporated SubmitDocumentationFeedback 3

(S: 3+1) RTC_A Comp_B Flash 32kB 16kB SMCLK ACLK MDB MAB XOUTXIN Spy-Bi- Wire CRC16 Bus Cntrl Logic MAB MDB MAB MDB MCLK USCI_A0 (UART, IrDA, SPI) USCI_B0 (SPI, I2C) LCD_B Segments 1,2,3,4 Mux I/O Ports P1/P2 2x8 I/Os PA 1x16 I/Os P1.x/P2.x 2x8 I/O Ports P3/P4 2x8 I/Os PB 1x16 I/Os P3.x/P4.x 2x8 I/O Ports 1x8 I/Os P5.x 1x8 AES128 Security En-/De- cryption RF_XOUTRF_XIN RF_NRF_P TA1 3 CC Registers MODEM RF/ANALOG TX & RX Frequency Synthesizer CPU Interface Packet Handler Digital RSSI Carrier Sense PQI / LQI CCA Sub-1GHz Radio (CC1101) MPY32 ADC12 (32kHz) (26MHz) Unified Clock System CPUXV2 incl. 16 Registers JTAG Interface DMA Controller

3 Channel

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailableCC430F613x CC430F612x CC430F513x SLAS554D –MAY 2009–REVISED JULY 2010 www.ti.com CC430F613x FunctionalBlock Diagram

4 SubmitDocumentationFeedback Copyright© 2009–2010,Texas InstrumentsIncorporated

(TOP VIEW) CC430F613x P3.7/PM_SMCLK/S17 P2.0/PM_CBOUT1/PM_TA1CLK/CB0/A0 P3.6/PM_RFGDO1/S16 P2.1/PM_TA1CCR0A/CB1/A1 P3.5/PM_TA0CCR4A/S15 P2.2/PM_TA1CCR1A/CB2/A2 P2.3/PM_TA1CCR2A/CB3/A3 P3.4/PM_TA0CCR3A/S14 P2.4/PM_RTCCLK/CB4/A4/VREF-/VeREF- P3.3/PM_TA0CCR2A/S13 P2.5/ /CB5/A5 PM_SVMOUT /VREF+/VeREF+ P3.2/PM_TA0CCR1A/S12 DVCC P4.4/S6 RST/NMI/SBWTDIO P4.3/S5 TEST/SBWTCK P4.2/S4 PJ.3/TCK P4.1/S3 P2.6/PM_ACLK/CB6/A6 P3.1/PM_TA0CCR0A/S11 P2.7/ /CB7/A7 PM_MODCLK/PM_DMAE0 P3.0/PM_CBOUT0/PM_TA0CLK/S10 AVCC DVCC P5.0/XIN P4.7/S9 P5.1/XOUT P4.6/S8 AVSS P4.5/S7 P4.0/S2P1.0/PM_RFGDO0/S18 3316 P5.3/S1P1.1/PM_RFGDO2/S19 3415 P5.2/S0P1.2/PM_UCB0SOMI/PM_UCB0SCL/S20 3514 RF_XINP1.3/PM_UCB0SIMO/PM_UCB0SDA/S21 3613 RF_XOUTP1.4/PM_UCB0CLK/PM_UCA0STE/S22 3712 AVCC_RFDVCC 3811 GUARDLCDCAP/R33 454 PJ.0/TDOP1.5/PM_UCA0RXD/PM_UCA0SOMI/R23 463 PJ.1/TDI/TCLKP1.6/PM_UCA0TXD/PM_UCA0SIMO/R13/LCDREF 472 PJ.2/TMSP1.7/PM_UCA0CLK/PM_UCB0STE/R03 481 AVCC_RFVCORE 3910 RF_PP5.4/S23 409 RF_NP5.5/COM3/S24 418 AVCC_RFP5.6/COM2/S25 427 AVCC_RFP5.7/COM1/S26 436 R_BIASCOM0 445 VSS Exposed die attached pad ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailable CC430F613x CC430F612x CC430F513x www.ti.com SLAS554D –MAY 2009–REVISED JULY 2010 The secondarydigitalfunctionson portsP1,P2,and P3 arefullymappable.Pinoutabove shows onlythedefault mapping.See Table7 fordetails. CAUTION: theLCDCAP/R33 must be connectedtoVSS ifnotused. Copyright© 2009–2010,Texas InstrumentsIncorporated SubmitDocumentationFeedback 5

(S: 3+1) RTC_A Comp_B Flash 32kB 32kB 16kB SMCLK ACLK MDB MAB XOUTXIN Spy-Bi- Wire CRC16 Bus Cntrl Logic MAB MDB MAB MDB MCLK USCI_A0 (UART, IrDA, SPI) USCI_B0 (SPI, I2C) LCD_B Segments 1,2,3,4 Mux I/O Ports P1/P2 2x8 I/Os PA 1x16 I/Os P1.x/P2.x 2x8 I/O Ports P3/P4 2x8 I/Os PB 1x16 I/Os P3.x/P4.x 2x8 I/O Ports 1x8 I/Os P5.x 1x8 AES128 Security En-/De- cryption RF_XOUTRF_XIN RF_NRF_P TA1 3 CC Registers MODEM RF/ANALOG TX & RX Frequency Synthesizer CPU Interface Packet Handler Digital RSSI Carrier Sense PQI / LQI CCA Sub-1GHz Radio (CC1101) MPY32 (32kHz) (26MHz) Unified Clock System JTAG Interface DMA Controller incl. 16 Registers ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailableCC430F613x CC430F612x CC430F513x SLAS554D –MAY 2009–REVISED JULY 2010 www.ti.com CC430F612x FunctionalBlock Diagram

6 SubmitDocumentationFeedback Copyright© 2009–2010,Texas InstrumentsIncorporated

(TOP VIEW) CC430F612x P3.7/PM_SMCLK/S17 P2.0/PM_CBOUT1/PM_TA1CLK/CB0 P3.6/PM_RFGDO1/S16 P2.1/PM_TA1CCR0A/CB1 P3.5/PM_TA0CCR4A/S15 P2.2/PM_TA1CCR1A/CB2 P2.3/PM_TA1CCR2A/CB3 P3.4/PM_TA0CCR3A/S14 P2.4/PM_RTCCLK/CB4 P3.3/PM_TA0CCR2A/S13 P2.5/ /CB5 PM_SVMOUT P3.2/PM_TA0CCR1A/S12 DVCC P4.4/S6 RST/NMI/SBWTDIO P4.3/S5 TEST/SBWTCK P4.2/S4 PJ.3/TCK P4.1/S3 P2.6/PM_ACLK/CB6 P3.1/PM_TA0CCR0A/S11 P2.7/ /CB PM_MODCLK/PM_DMAE0 P3.0/PM_CBOUT0/PM_TA0CLK/S10 AVCC DVCC P5.0/XIN P4.7/S9 P5.1/XOUT P4.6/S8 AVSS P4.5/S7 P4.0/S2P1.0/PM_RFGDO0/S18 3316 P5.3/S1P1.1/PM_RFGDO2/S19 3415 P5.2/S0P1.2/PM_UCB0SOMI/PM_UCB0SCL/S20 3514 RF_XINP1.3/PM_UCB0SIMO/PM_UCB0SDA/S21 3613 RF_XOUTP1.4/PM_UCB0CLK/PM_UCA0STE/S22 3712 AVCC_RFDVCC 3811 GUARDLCDCAP/R33 454 PJ.0/TDOP1.5/PM_UCA0RXD/PM_UCA0SOMI/R23 463 PJ.1/TDI/TCLKP1.6/PM_UCA0TXD/PM_UCA0SIMO/R13/LCDREF 472 PJ.2/TMSP1.7/PM_UCA0CLK/PM_UCB0STE/R03 481 AVCC_RFVCORE 3910 RF_PP5.4/S23 409 RF_NP5.5/COM3/S24 418 AVCC_RFP5.6/COM2/S25 427 AVCC_RFP5.7/COM1/S26 436 R_BIASCOM0 445 VSS Exposed die attached pad ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailable CC430F613x CC430F612x CC430F513x www.ti.com SLAS554D –MAY 2009–REVISED JULY 2010 The secondarydigitalfunctionson portsP1,P2,and P3 arefullymappable.Pinoutabove shows onlythedefault mapping.RefertoTable7 fordetails. CAUTION: theLCDCAP/R33 must be connectedtoVSS ifnotused. Copyright© 2009–2010,Texas InstrumentsIncorporated SubmitDocumentationFeedback 7

(S: 3+1) RTC_A Comp_B Flash 32kB 16kB 8kB SMCLK ACLK MDB MAB XOUTXIN Spy-Bi- Wire CRC16 Bus Cntrl Logic MAB MDB MAB MDB MCLK USCI_A0 (UART, IrDA, SPI) USCI_B0 (SPI, I2C) I/O Ports P1/P2 2x8 I/Os PA 1x16 I/Os P1.x/P2.x 2x8 I/O Ports 1x8 I/Os P3.x 1x8 I/O Ports 1x2 I/Os P5.x 1x2 AES128 Security En-/De- cryption RF_XOUTRF_XIN RF_NRF_P MODEM RF/ANALOG TX & RX Frequency Synthesizer CPU Interface Packet Handler Digital RSSI Carrier Sense PQI / LQI CCA Sub-1GHz Radio (CC1101) MPY32 ADC12 (32kHz) (26MHz) Unified Clock System JTAG Interface DMA Controller incl. 16 Registers TA1 3 CC Registers ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailableCC430F613x CC430F612x CC430F513x SLAS554D –MAY 2009–REVISED JULY 2010 www.ti.com CC430F513x FunctionalBlock Diagram

8 SubmitDocumentationFeedback Copyright© 2009–2010,Texas InstrumentsIncorporated

(TOP VIEW) 13 14 15 16 17 18 19 20 21 22 23 24 48 47 46 45 44 43 42 41 40 39 38 37 P1.1/PM_RFGDO2 P1.2/PM_UCB0SOMI/PM_UCB0SCL P1.7/PM_UCA0CLK/PM_UCB0STE P2.0/PM_CBOUT1/PM_TA1CLK/CB0/A0 P2.1/PM_TA1CCR0A/CB1/A1 P2.2/PM_TA1CCR1A/CB2/A2 P1.3/PM_UCB0SIMO/PM_UCB0SDA P1.4/PM_UCB0CLK/PM_UCA0STE DVCC VCORE P1.5/PM_UCA0RXD/PM_UCA0SOMI P1.6/PM_UCA0TXD/PM_UCA0SIMO RF_XIN RF_XOUT AVCC_RF GUARD PJ.0/TDO PJ.1/TDI/TCLK AVCC_RF RF_P RF_N AVCC_RF AVCC_RF R_BIAS P1.0/PM_RFGDO0P3.7/PM_SMCLKP3.6/PM_RFGDO1 P3.0/PM_CBOUT0/PM_TA0CLK DVCC P2.7/PM_MODCLK/PM_DMAE0 P2.6/PM_ACLK VSS Exposed die attached pad CC430F513x ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailable CC430F613x CC430F612x CC430F513x www.ti.com SLAS554D –MAY 2009–REVISED JULY 2010 The secondarydigitalfunctionson portsP1,P2,and P3 arefullymappable.Pinoutabove shows onlythedefault mapping.RefertoTable7 fordetails. Copyright© 2009–2010,Texas InstrumentsIncorporated SubmitDocumentationFeedback 9

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailableCC430F613x CC430F612x CC430F513x SLAS554D –MAY 2009–REVISED JULY 2010 www.ti.com CC430F613x and CC430F612x TerminalFunctions TERMINAL I/O(1) DESCRIPTION NAME NO. General-purposedigitalI/Owithportinterruptand map-ablesecondaryfunctionP1.7/PM_UCA0CLK/ 1 I/O Defaultmapping:USCI_A0 clockinput/output/USCI_B0 SPI slavetransmitenablePM_UCB0STE/ R03 Input/outputportoflowestanalogLCD voltage(V5) General-purposedigitalI/Owithportinterruptand map-ablesecondaryfunction P1.6/PM_UCA0TXD/ Defaultmapping:USCI_A0 UART transmitdata;USCI_A0 SPI slaveinmasterout2 I/OPM_UCB0SIMO/ R13/ LCDREF Input/outputportofthirdmost positiveanalogLCD voltage(V3 orV4) ExternalreferencevoltageinputforregulatedLCD voltage General-purposedigitalI/Owithportinterruptand map-ablesecondaryfunctionP1.5/PM_UCA0RXD/ 3 I/O Defaultmapping:USCI_A0 UART receivedata;USCI_A0 SPI slaveoutmasterinPM_UCB0SOMI/ R23 Input/outputportofsecond most positiveanalogLCD voltage(V2) LCD capacitorconnection LCDCAP/ R33 4 I/O Input/outputportofmost positiveanalogLCD voltage(V1) CAUTION: must be connectedtoVSS ifnotused. COM0 5 O LCD common outputCOM0 forLCD backplane General-purposedigitalI/O P5.7/COM1/ S26 6 I/O LCD common outputCOM1 forLCD backplane LCD segment outputS26 General-purposedigitalI/O P5.6/COM2/ S25 7 I/O LCD common outputCOM2 forLCD backplane LCD segment outputS25 General-purposedigitalI/O P5.5/COM3/ S24 8 I/O LCD common outputCOM3 forLCD backplane LCD segment outputS24 General-purposedigitalI/OP5.4/S23 9 I/O LCD segment outputS23 VCORE 10 Regulatedcorepower supply DVCC 11 Digitalpower supply General-purposedigitalI/Owithportinterruptand map-ablesecondaryfunctionP1.4/PM_UCB0CLK/ 12 I/O Defaultmapping:USCI_B0 clockinput/output/USCI_A0 SPI slavetransmitenablePM_UCA0STE/ S22 LCD segment outputS22 General-purposedigitalI/Owithportinterruptand map-ablesecondaryfunctionP1.3/PM_UCB0SIMO/ 13 I/O Defaultmapping:USCI_B0 SPI slaveinmasterout/USCI_B0I2C dataPM_UCB0SDA/ S21 LCD segment outputS21 General-purposedigitalI/Owithportinterruptand map-ablesecondaryfunctionP1.2/PM_UCB0SOMI/ 14 I/O Defaultmapping:USCI_B0 SPI slaveoutmasterin/UCSI_B0I2C clockPM_UCB0SCL/ S20 LCD segment outputS20 General-purposedigitalI/Owithportinterruptand map-ablesecondaryfunction P1.1/PM_RFGDO2/ S19 15 I/O Defaultmapping:RadioGDO2 output LCD segment outputS19 General-purposedigitalI/Owithportinterruptand map-ablesecondaryfunction P1.0/PM_RFGDO0/ S18 16 I/O Defaultmapping:RadioGDO0 output LCD segment outputS18 General-purposedigitalI/Owithmap-ablesecondaryfunction P3.7/PM_SMCLK/ S17 17 I/O Defaultmapping:SMCLK output LCD segment outputS17 General-purposedigitalI/Owithmap-ablesecondaryfunction P3.6/PM_RFGDO1/ S16 18 I/O Defaultmapping:RadioGDO1 output LCD segment outputS16 General-purposedigitalI/Owithmap-ablesecondaryfunction P3.5/PM_TA0CCR4A/ S15 19 I/O Defaultmapping:TA0 CCR4 compare output/captureinput LCD segment outputS15 General-purposedigitalI/Owithmap-ablesecondaryfunction P3.4/PM_TA0CCR3A/ S14 20 I/O Defaultmapping:TA0 CCR3 compare output/captureinput LCD segment outputS14 General-purposedigitalI/Owithmap-ablesecondaryfunction P3.3/PM_TA0CCR2A/ S13 21 I/O Defaultmapping:TA0 CCR2 compare output/captureinput LCD segment outputS13 (1) I= input,O = output

10 SubmitDocumentationFeedback Copyright© 2009–2010,Texas InstrumentsIncorporated

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailable CC430F613x CC430F612x CC430F513x www.ti.com SLAS554D –MAY 2009–REVISED JULY 2010 CC430F613x and CC430F612x TerminalFunctions(continued) TERMINAL I/O(1) DESCRIPTION NAME NO. General-purposedigitalI/Owithmap-ablesecondaryfunction P3.2/PM_TA0CCR1A/ S12 22 I/O Defaultmapping:TA0 CCR1 compare output/captureinput LCD segment outputS12 General-purposedigitalI/Owithmap-ablesecondaryfunction P3.1/PM_TA0CCR0A/ S11 23 I/O Defaultmapping:TA0 CCR0 compare output/captureinput LCD segment outputS11 General-purposedigitalI/Owithmap-ablesecondaryfunctionP3.0/PM_CBOUT0/ PM_TA0CLK/ 24 I/O Defaultmapping:Comparator_Boutput;TA0 clockinputS10 LCD segment outputS10 DVCC 25 Digitalpower supply General-purposedigitalI/OP4.7/S9 26 I/O LCD segment outputS9 General-purposedigitalI/OP4.6/S8 27 I/O LCD segment outputS8 General-purposedigitalI/OP4.5/S7 28 I/O LCD segment outputS7 General-purposedigitalI/OP4.4/S6 29 I/O LCD segment outputS6 General-purposedigitalI/OP4.3/S5 30 I/O LCD segment outputS5 General-purposedigitalI/OP4.2/S4 31 I/O LCD segment outputS4 General-purposedigitalI/OP4.1/S3 32 I/O LCD segment outputS3 General-purposedigitalI/OP4.0/S2 33 I/O LCD segment outputS2 General-purposedigitalI/OP5.3/S1 34 I/O LCD segment outputS1 General-purposedigitalI/OP5.2/S0 35 I/O LCD segment outputS0 RF_XIN 36 I InputterminalforRF crystaloscillator,orexternalclockinput RF_XOUT 37 O OutputterminalforRF crystaloscillator AVCC_RF 38 Radioanalogpower supply AVCC_RF 39 Radioanalogpower supply RF PositiveRF inputtoLNA inreceivemodeRF_P 40 I/O PositiveRF outputfromPA intransmitmode RF NegativeRF inputtoLNA inreceivemodeRF_N 41 I/O NegativeRF outputfromPA intransmitmode AVCC_RF 42 Radioanalogpower supply AVCC_RF 43 Radioanalogpower supply RBIAS 44 Externalbiasresistorforradioreferencecurrent GUARD 45 Power supplyconnectionfordigitalnoiseisolation General-purposedigitalI/OPJ.0/TDO 46 I/O Testdataoutputport General-purposedigitalI/OPJ.1/TDI/TCLK 47 I/O Testdatainputortestclockinput General-purposedigitalI/OPJ.2/TMS 48 I/O Testmode select General-purposedigitalI/OPJ.3/TCK 49 I/O Testclock Testmode pin– selectdigitalI/Oon JTAG pinsTEST/ SBWTCK 50 I Spy-bi-wireinputclock Copyright© 2009–2010,Texas InstrumentsIncorporated SubmitDocumentationFeedback 11

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailableCC430F613x CC430F612x CC430F513x SLAS554D –MAY 2009–REVISED JULY 2010 www.ti.com CC430F613x and CC430F612x TerminalFunctions(continued) TERMINAL I/O(1) DESCRIPTION NAME NO. Resetinputactivelow RST/NMI/ SBWTDIO 51 I/O Non-maskableinterruptinput Spy-bi-wiredatainput/output DVCC 52 Digitalpower supply AVSS 53 AnaloggroundsupplyforADC12 General-purposedigitalI/OP5.1/XOUT 54 I/O OutputterminalofcrystaloscillatorXT1 General-purposedigitalI/OP5.0/XIN 55 I/O InputterminalforcrystaloscillatorXT1 AVCC 56 Analogpower supply General-purposedigitalI/Owithportinterruptand map-ablesecondaryfunction P2.7/PM_ADC12CLK/ Defaultmapping:ADC12CLK output;DMA externaltriggerinput57 I/OPM_DMAE0/ CB7 (/A7) Comparator_BinputCB7 AnaloginputA7 – 12-bitADC (onlyCC430F613x) General-purposedigitalI/Owithportinterruptand map-ablesecondaryfunction Defaultmapping:ACLK outputP2.6/PM_ACLK/ CB6 (/A6) 58 I/O Comparator_BinputCB6 AnaloginputA6 – 12-bitADC (onlyCC430F613x) General-purposedigitalI/Owithportinterruptand map-ablesecondaryfunction Defaultmapping:SVM output P2.5/PM_SVMOUT/ CB5 Comparator_BinputCB559 I/O(/A5/VREF+/ VeREF+) AnaloginputA5 – 12-bitADC (onlyCC430F613x) OutputofreferencevoltagetotheADC (onlyCC430F613x) Inputforan externalreferencevoltagetotheADC (onlyCC430F613x) General-purposedigitalI/Owithportinterruptand map-ablesecondaryfunction Defaultmapping:RTCCLK output P2.4/PM_RTCCLK/ CB4 Comparator_BinputCB460 I/O(/A4/VREF-/ VeREF-) AnaloginputA4 – 12-bitADC (onlyCC430F613x) NegativeterminalfortheADC 's referencevoltageforbothsources,theinternal referencevoltage,oran externalappliedreferencevoltage(onlyCC430F613x) General-purposedigitalI/Owithportinterruptand map-ablesecondaryfunction Defaultmapping:TA1 CCR2 compare output/captureinputP2.3/PM_TA1CCR2A/ CB3 (/A3) 61 I/O Comparator_BinputCB3 AnaloginputA3 – 12-bitADC (onlyCC430F613x) General-purposedigitalI/Owithportinterruptand map-ablesecondaryfunction Defaultmapping:TA1 CCR1 compare output/captureinputP2.2/PM_TA1CCR1A/ CB2 (/A2) 62 I/O Comparator_BinputCB2 AnaloginputA2 – 12-bitADC (onlyCC430F613x) General-purposedigitalI/Owithportinterruptand map-ablesecondaryfunction Defaultmapping:TA1 CCR0 compare output/captureinputP2.1/PM_TA1CCR0A/CB1(/A1) 63 I/O Comparator_BinputCB1 AnaloginputA1 – 12-bitADC (onlyCC430F613x) General-purposedigitalI/Owithportinterruptand map-ablesecondaryfunction P2.0/PM_CBOUT1/ PM_TA1CLK/ Defaultmapping:Comparator_Boutput;TA1 clockinput64 I/OCB0 (/A0) Comparator_BinputCB0 AnaloginputA0 – 12-bitADC (onlyCC430F613x) Ground supply VSS -Exposed dieattachpad The exposed dieattachpad must be connected toa solidground planeas thisis theground connectionforthechip!

12 SubmitDocumentationFeedback Copyright© 2009–2010,Texas InstrumentsIncorporated

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailable CC430F613x CC430F612x CC430F513x www.ti.com SLAS554D –MAY 2009–REVISED JULY 2010 CC430F513x TerminalFunctions TERMINAL I/O(1) DESCRIPTION NAME NO. General-purposedigitalI/Owithportinterruptand map-ablesecondaryfunction Defaultmapping:TA1 CCR1 compare output/captureinputP2.2/PM_TA1CCR1A/ CB2/ A2 1 I/O Comparator_BinputCB2 AnaloginputA2 – 12-bitADC General-purposedigitalI/Owithportinterruptand map-ablesecondaryfunction Defaultmapping:TA1 CCR0 compare output/captureinputP2.1/PM_TA1CCR0A/ CB1/ A1 2 I/O Comparator_BinputCB1 AnaloginputA1 – 12-bitADC General-purposedigitalI/Owithportinterruptand map-ablesecondaryfunction P2.0/PM_CBOUT1/ PM_TA1CLK/ Defaultmapping:Comparator_Boutput;TA1 clockinput3 I/OCB0/ A0 Comparator_BinputCB0 AnaloginputA0 – 12-bitADC P1.7/PM_UCA0CLK/ General-purposedigitalI/Owithportinterruptand map-ablesecondaryfunction4 I/OPM_UCB0STE Defaultmapping:USCI_A0 clockinput/output/USCI_B0 SPI slavetransmitenable P1.6/PM_UCA0TXD/ General-purposedigitalI/Owithportinterruptand map-ablesecondaryfunction5 I/OPM_UCB0SIMO Defaultmapping:USCI_A0 UART transmitdata;USCI_A0 SPI slaveinmasterout P1.5/PM_UCA0RXD/ General-purposedigitalI/Owithportinterruptand map-ablesecondaryfunction6 I/OPM_UCB0SOMI Defaultmapping:USCI_A0 UART receivedata;USCI_A0 SPI slaveoutmasterin VCORE 7 Regulatedcorepower supply DVCC 8 Digitalpower supply P1.4/PM_UCB0CLK/ General-purposedigitalI/Owithportinterruptand map-ablesecondaryfunction9 I/OPM_UCA0STE Defaultmapping:USCI_B0 clockinput/output/USCI_A0 SPI slavetransmitenable P1.3/PM_UCB0SIMO/ General-purposedigitalI/Owithportinterruptand map-ablesecondaryfunction10 I/OPM_UCB0SDA Defaultmapping:USCI_B0 SPI slaveinmasterout/USCI_B0I2C data P1.2/PM_UCB0SOMI/ General-purposedigitalI/Owithportinterruptand map-ablesecondaryfunction11 I/OPM_UCB0SCL Defaultmapping:USCI_B0 SPI slaveoutmasterin/UCSI_B0I2C clock General-purposedigitalI/Owithportinterruptand map-ablesecondaryfunctionP1.1/PM_RFGDO2 12 I/O Defaultmapping:RadioGDO2 output General-purposedigitalI/Owithportinterruptand map-ablesecondaryfunctionP1.0/PM_RFGDO0 13 I/O Defaultmapping:RadioGDO0 output General-purposedigitalI/Owithmap-ablesecondaryfunctionP3.7/PM_SMCLK 14 I/O Defaultmapping:SMCLK output General-purposedigitalI/Owithmap-ablesecondaryfunctionP3.6/PM_RFGDO1 15 I/O Defaultmapping:RadioGDO1 output General-purposedigitalI/Owithmap-ablesecondaryfunctionP3.5/PM_TA0CCR4A 16 I/O Defaultmapping:TA0 CCR4 compare output/captureinput General-purposedigitalI/Owithmap-ablesecondaryfunctionP3.4/PM_TA0CCR3A 17 I/O Defaultmapping:TA0 CCR3 compare output/captureinput General-purposedigitalI/Owithmap-ablesecondaryfunctionP3.3/PM_TA0CCR2A 18 I/O Defaultmapping:TA0 CCR2 compare output/captureinput General-purposedigitalI/Owithmap-ablesecondaryfunctionP3.2/PM_TA0CCR1A 19 I/O Defaultmapping:TA0 CCR1 compare output/captureinput General-purposedigitalI/Owithmap-ablesecondaryfunctionP3.1/PM_TA0CCR0A 20 I/O Defaultmapping:TA0 CCR0 compare output/captureinput General-purposedigitalI/Owithmap-ablesecondaryfunctionP3.0/PM_CBOUT0/ PM_TA0CLK 21 I/O Defaultmapping:Comparator_Boutput;TA0 clockinput DVCC 22 Digitalpower supply P2.7/PM_ADC12CLK/ General-purposedigitalI/Owithportinterruptand map-ablesecondaryfunction23 I/OPM_DMAE0 Defaultmapping:ADC12CLK output;DMA externaltriggerinput General-purposedigitalI/Owithportinterruptand map-ablesecondaryfunctionP2.6/PM_ACLK 24 I/O Defaultmapping:ACLK output RF_XIN 25 I InputterminalforRF crystaloscillator,orexternalclockinput RF_XOUT 26 O OutputterminalforRF crystaloscillator AVCC_RF 27 Radioanalogpower supply (1) I= input,O = output Copyright© 2009–2010,Texas InstrumentsIncorporated SubmitDocumentationFeedback 13

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailableCC430F613x CC430F612x CC430F513x SLAS554D –MAY 2009–REVISED JULY 2010 www.ti.com CC430F513x TerminalFunctions(continued) TERMINAL I/O(1) DESCRIPTION NAME NO. AVCC_RF 28 Radioanalogpower supply RF PositiveRF inputtoLNA inreceivemodeRF_P 29 I/O PositiveRF outputfromPA intransmitmode RF NegativeRF inputtoLNA inreceivemodeRF_N 30 I/O NegativeRF outputfromPA intransmitmode AVCC_RF 31 Radioanalogpower supply AVCC_RF 32 Radioanalogpower supply RBIAS 33 Externalbiasresistorforradioreferencecurrent GUARD 34 Power supplyconnectionfordigitalnoiseisolation General-purposedigitalI/OPJ.0/TDO 35 I/O Testdataoutputport General-purposedigitalI/OPJ.1/TDI/TCLK 36 I/O Testdatainputortestclockinput General-purposedigitalI/OPJ.2/TMS 37 I/O Testmode select General-purposedigitalI/OPJ.3/TCK 38 I/O Testclock Testmode pin– selectdigitalI/Oon JTAG pinsTEST/ SBWTCK 39 I Spy-bi-wireinputclock Resetinputactivelow RST/NMI/ SBWTDIO 40 I/O Non-maskableinterruptinput Spy-bi-wiredatainput/output DVCC 41 Digitalpower supply AVSS 42 AnaloggroundsupplyforADC12 General-purposedigitalI/OP5.1/XOUT 43 I/O OutputterminalofcrystaloscillatorXT1 General-purposedigitalI/OP5.0/XIN 44 I/O InputterminalforcrystaloscillatorXT1 AVCC 45 Analogpower supply General-purposedigitalI/Owithportinterruptand map-ablesecondaryfunction Defaultmapping:SVM output P2.5/PM_SVMOUT/ CB5/ Comparator_BinputCB546 I/OA5/VREF+/ VeREF+ AnaloginputA5 – 12-bitADC OutputofreferencevoltagetotheADC Inputforan externalreferencevoltagetotheADC General-purposedigitalI/Owithportinterruptand map-ablesecondaryfunction Defaultmapping:RTCCLK output P2.4/PM_RTCCLK/ CB4/ Comparator_BinputCB447 I/OA4/VREF-/ VeREF- AnaloginputA4 – 12-bitADC NegativeterminalfortheADC 's referencevoltageforbothsources,theinternal referencevoltage,oran externalappliedreferencevoltage General-purposedigitalI/Owithportinterruptand map-ablesecondaryfunction Defaultmapping:TA1 CCR2 compare output/captureinputP2.3/PM_TA1CCR2A/ CB3/ A3 48 I/O Comparator_BinputCB3 AnaloginputA3 – 12-bitADC Ground supply VSS -Exposed dieattachpad The exposed dieattachpad must be connected toa solidground planeas thisis theground connectionforthechip!

14 SubmitDocumentationFeedback Copyright© 2009–2010,Texas InstrumentsIncorporated

RBIAS RF_XIN RF_XOUT XOSC LNA FREQ SYNTH ADC DEMODULATOR PACKET HANDLER RXFIFOTXFIFO INTERFACE TO MCU RADIO□CONTROL RF_P RF_N RC□OSC ADC MODULATOR ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailable CC430F613x CC430F612x CC430F513x www.ti.com SLAS554D –MAY 2009–REVISED JULY 2010 SHORT-FORM DESCRIPTION Sub-1 GHz Radio The implementedsub-1-GHz radiomodule isbased on theindustry-leadingCC1101, requiringveryfew external components.Figure1 shows a high-levelblockdiagramoftheimplementedradio. Figure1. Sub-1 GHz Radio Block Diagram The radiofeaturesa low-IFreceiver.The receivedRF signalisamplifiedby a low-noiseamplifier(LNA) and down-convertedinquadraturetotheintermediatefrequency(IF).At IF,theI/Qsignalsare digitized.Automatic gaincontrol(AGC),finechannelfiltering,demodulationbit/packetsynchronizationareperformeddigitally. The transmitterpartisbased on directsynthesisof the RF frequency.The frequencysynthesizerincludesa completelyon-chipLC VCO and a 90 degrees phase shifterforgeneratingthe I and Q LO signalsto the down-conversionmixersinreceivemode. The 26-MHz crystaloscillatorgeneratesthe referencefrequencyforthe synthesizer,as wellas clocksforthe ADC and thedigitalpart. A memory mapped registerinterfaceisused fordataaccess,configurationand statusrequestby theCPU. The digitalbaseband includessupportforchannelconfiguration,packethandlingand databuffering. Forcompletemodule descriptions,see theCC430 FamilyUser's Guide,literaturenumber SLAU259 . Copyright© 2009–2010,Texas InstrumentsIncorporated SubmitDocumentationFeedback 15

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailableCC430F613x CC430F612x CC430F513x SLAS554D –MAY 2009–REVISED JULY 2010 www.ti.com CPU The MSP430 CPU has a 16-bitRISC architecturethatishighlytransparentto the application.Alloperations, otherthanprogram-flowinstructions,areperformedas registeroperationsinconjunctionwithseven addressing modes forsourceoperandand fouraddressingmodes fordestinationoperand. The CPU isintegratedwith16 registersthatprovidereducedinstructionexecutiontime.The register-to-register operationexecutiontimeisone cycleoftheCPU clock. Four oftheregisters,R0 toR3, are dedicatedas program counter,stackpointer,statusregister,and constant generator,respectively.The remainingregistersaregeneral-purposeregisters. Peripheralsare connectedto the CPU usingdata,address,and controlbuses,and can be handledwithall instructions. The instructionsetconsistsof the original51 instructionswiththreeformatsand seven addressmodes and additionalinstructionsfortheexpanded addressrange.Each instructioncan operateon word and bytedata. OperatingModes The CC430 has one activemode and fivesoftwareselectablelow-powermodes ofoperation.An interruptevent can wake up the devicefrom any of the low-powermodes, servicethe request,and restoreback to the low-powermode on returnfromtheinterruptprogram. The followingsixoperatingmodes can be configuredby software:

• Activemode (AM) – Allclocksareactive
• Low-power mode 0 (LPM0) – CPU isdisabled – ACLK and SMCLK remainactive,MCLK isdisabled – FLL loopcontrolremainsactive
• Low-power mode 1 (LPM1) – CPU isdisabled – FLL loopcontrolisdisabled – ACLK and SMCLK remainactive,MCLK isdisabled
• Low-power mode 2 (LPM2) – CPU isdisabled – MCLK and FLL loopcontroland DCOCLK aredisabled – DCO 's dc-generatorremainsenabled – ACLK remainsactive
• Low-power mode 3 (LPM3) – CPU isdisabled – MCLK, FLL loopcontrol,and DCOCLK aredisabled – DCO 's dc-generatorisdisabled – ACLK remainsactive
• Low-power mode 4 (LPM4) – CPU isdisabled – ACLK isdisabled – MCLK, FLL loopcontrol,and DCOCLK aredisabled – DCO 's dc-generatorisdisabled – Crystaloscillatorisstopped – Completedataretention

16 SubmitDocumentationFeedback Copyright© 2009–2010,Texas InstrumentsIncorporated

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailable CC430F613x CC430F612x CC430F513x www.ti.com SLAS554D –MAY 2009–REVISED JULY 2010 InterruptVectorAddresses The interruptvectorsand thepower-upstartaddressarelocatedintheaddressrange0FFFFh to0FF80h. The vectorcontainsthe16-bitaddressoftheappropriateinterrupt-handlerinstructionsequence. Table2.InterruptSources,Flags,and Vectors SYSTEM WORDINTERRUPT SOURCE INTERRUPT FLAG PRIORITYINTERRUPT ADDRESS System Reset Power-Up ExternalReset WDTIFG, KEYV (SYSRSTIV) (1)(2) Reset 0FFFEh 63,highestWatchdog Timeout,Password Violation FlashMemory Password Violation System NMI SVMLIFG, SVMHIFG, DLYLIFG, DLYHIFG,PMM VLRLIFG, VLRHIFG, VMAIFG, JMBNIFG, (Non)maskable 0FFFCh 62VacantMemory Access JMBOUTIFG (SYSSNIV)(1)(3) JTAG Mailbox User NMI NMI NMIIFG, OFIFG, ACCVIFG (SYSUNIV)(1)(3) (Non)maskable 0FFFAh 61OscillatorFault FlashMemory Access Violation Comparator_B Comparator_BInterruptFlags(CBIV)(1) Maskable 0FFF8h 60 Watchdog IntervalTimerMode WDTIFG Maskable 0FFF6h 59 USCI_A0 Receive/Transmit UCA0RXIFG, UCA0TXIFG (UCA0IV)(1) Maskable 0FFF4h 58 UCB0RXIFG, UCB0TXIFG, I2C StatusInterruptUSCI_B0 Receive/Transmit Maskable 0FFF2h 57Flags(UCB0IV)(1) ADC12_A ADC12IFG0 ...ADC12IFG15 (ADC12IV)(1) Maskable 0FFF0h 56(Reservedon CC430F612x) TA0 TA0CCR0 CCIFG0 Maskable 0FFEEh 55 TA0CCR1 CCIFG1 ...TA0CCR4 CCIFG4,TA0 Maskable 0FFECh 54TA0IFG (TA0IV)(1) RadioInterfaceInterruptFlags(RF1AIFIV)RF1A CC1101-based Radio Maskable 0FFEAh 53RadioCore InterruptFlags(RF1AIV) DMA DMA0IFG, DMA1IFG, DMA2IFG (DMAIV)(1) Maskable 0FFE8h 52 TA1 TA1CCR0 CCIFG0 Maskable 0FFE6h 51 TA1CCR1 CCIFG1 ...TA1CCR2 CCIFG2,TA1 Maskable 0FFE4h 50TA1IFG (TA1IV)(1) I/OPortP1 P1IFG.0toP1IFG.7(P1IV)(1) Maskable 0FFE2h 49 I/OPortP2 P2IFG.0toP2IFG.7(P2IV)(1) Maskable 0FFE0h 48 LCD_B LCD_B InterruptFlags(LCDBIV)(1) Maskable 0FFDEh 47(Reservedon CC430F513x) RTCRDYIFG, RTCTEVIFG, RTCAIFG,RTC_A Maskable 0FFDCh 46RT0PSIFG, RT1PSIFG (RTCIV)(1) AES AESRDYIFG Maskable 0FFDAh 45 0FFD8h 44 Reserved Reserved(4) ⋮ ⋮ 0FF80h 0,lowest (1) Multiplesourceflags (2) A resetisgeneratediftheCPU triestofetchinstructionsfromwithinperipheralspace. (3) (Non)maskable:theindividualinterrupt-enablebitcan disablean interruptevent,butthegeneral-interruptenablecannotdisableit. (4) Reservedinterruptvectorsataddressesarenotused inthisdeviceand can be used forregularprogramcode ifnecessary.To maintain compatibilitywithotherdevices,itisrecommended toreservetheselocations. Copyright© 2009–2010,Texas InstrumentsIncorporated SubmitDocumentationFeedback 17

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailableCC430F613x CC430F612x CC430F513x SLAS554D –MAY 2009–REVISED JULY 2010 www.ti.com Memory Organization Table3.Memory Organization CC430F6137/F6127 CC430F6135/F6125CC430F6126 (1) CC430F5133 (1) CC430F5137 (1) CC430F5135 (1) Main Memory Total 32kB 32kB 16kB 8kB (flash) Size Main:Interrupt 00FFFFh –00FF80h 00FFFFh –00FF80h 00FFFFh –00FF80h 00FFFFh –00FF80h vector Main:code Bank 0 32kB 32kB 16kB 8kB memory 00FFFFh –008000h 00FFFFh –008000h 00FFFFh –00C000h 00FFFFh –00E000h Total 4kB 2kB 2kB 2kBRAM Size Sect1 2kB notavailable notavailable notavailable 002BFFh –002400h Sect0 2kB 2kB 2kB 2kB 0023FFh–001C00h 0023FFh–001C00h 0023FFh–001C00h 0023FFh–001C00h

128 B 128 B 128 B 128 B

001AFFh to001A80h 001AFFh to001A80h 001AFFh to001A80h 001AFFh to001A80hDevice Descriptor 128 B 128 B 128 B 128 B 001A7Fh to001A00h 001A7Fh to001A00h 001A7Fh to001A00h 001A7Fh to001A00h InfoA 128 B 128 B 128 B 128 B 0019FFh to001980h 0019FFh to001980h 0019FFh to001980h 0019FFh to001980h InfoB 128 B 128 B 128 B 128 B 00197Fh to001900h 00197Fh to001900h 00197Fh to001900h 00197Fh to001900hInformation memory (flash) InfoC 128 B 128 B 128 B 128 B 0018FFh to001880h 0018FFh to001880h 0018FFh to001880h 0018FFh to001880h InfoD 128 B 128 B 128 B 128 B 00187Fh to001800h 00187Fh to001800h 00187Fh to001800h 00187Fh to001800h BSL 3 512 B 512 B 512 B 512 B 0017FFh to001600h 0017FFh to001600h 0017FFh to001600h 0017FFh to001600h BSL 2 512 B 512 B 512 B 512 B Bootstraploader 0015FFh to001400h 0015FFh to001400h 0015FFh to001400h 0015FFh to001400h (BSL)memory BSL 1 512 B 512 B 512 B 512 B(flash) 0013FFh to001200h 0013FFh to001200h 0013FFh to001200h 0013FFh to001200h BSL 0 512 B 512 B 512 B 512 B 0011FFh to001000h 0011FFh to001000h 0011FFh to001000h 0011FFh to001000h

4 KB 4 KB 4 KB 4 KBPeripherals 000FFFh to0h 000FFFh to0h 000FFFh to0h 000FFFh to0h

(1) Allnotmentionedmemory regionsarevacantmemory and any accesstothem willcause a VacantMemory Interrupt. BootstrapLoader (BSL) The BSL enablesusersto program the flashmemory or RAM usingvariousserialinterfaces.Access to the devicememory viathe BSL isprotectedby an user-definedpassword.BSL entryrequiresa specificentry sequence on theRST/NMI/SBWTDIO and TEST/SBWTCK pins.For completedescriptionofthefeaturesofthe BSL and itsimplementation,see theMSP430 Memory Programming User's Guide,literaturenumber SLAU265 . Table4.UART BSL Pin Requirements and Functions DEVICE SIGNAL BSL FUNCTION RST/NMI/SBWTDIO Entrysequence signal TEST/SBWTCK Entrysequence signal P1.6 Data transmit P1.5 Data receive VCC Power supply VSS Ground supply

18 SubmitDocumentationFeedback Copyright© 2009–2010,Texas InstrumentsIncorporated

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailable CC430F613x CC430F612x CC430F513x www.ti.com SLAS554D –MAY 2009–REVISED JULY 2010 JTAG Operation JTAG Standard Interface The CC430 familysupportsthestandardJTAG interfacewhich requiresfoursignalsforsendingand receiving data.The JTAG signalsare shared withgeneral-purposeI/O.The TEST/SBWTCK pinisused to enablethe JTAG signals.In additionto these signals,the RST/NMI/SBWTDIO is requiredto interfacewith MSP430 developmenttoolsand deviceprogrammers.The JTAG pin requirementsare shown in Table 5. For further detailson interfacingto developmenttoolsand deviceprogrammers,see theMSP430 Hardware ToolsUser's Guide,literaturenumber SLAU278 . Table5.JTAG Pin Requirements and Functions DEVICE SIGNAL Direction FUNCTION PJ.3/TCK IN JTAG clockinput PJ.2/TMS IN JTAG statecontrol PJ.1/TDI/TCLK IN JTAG datainput/TCLKinput PJ.0/TDO OUT JTAG dataoutput TEST/SBWTCK IN EnableJTAG pins RST/NMI/SBWTDIO IN Externalreset VCC Power supply VSS Ground supply Spy-Bi-WireInterface In additionto the standardJTAG interface,the CC430 familysupportsthe two wire Spy-Bi-Wireinterface. Spy-Bi-Wirecan be used tointerfacewithMSP430 developmenttoolsand deviceprogrammers.The Spy-Bi-Wire interfacepinrequirementsare shown inTable 6. For furtherdetailson interfacingto developmenttoolsand deviceprogrammers,see theMSP430 Hardware ToolsUser's Guide,literaturenumber SLAU278 . Table6.Spy-Bi-WirePin Requirements and Functions DEVICE SIGNAL Direction FUNCTION TEST/SBWTCK IN Spy-Bi-Wireclockinput RST/NMI/SBWTDIO IN,OUT Spy-Bi-Wiredatainput/output VCC Power supply VSS Ground supply FlashMemory The flashmemory can be programmed viatheJTAG port,Spy-Bi-Wire(SBW), or in-systemby theCPU. The CPU can performsingle-byte,single-word,and long-wordwritesto the flashmemory. Featuresof the flash memory include:

• Flashmemory has n segments ofmain memory and foursegments ofinformationmemory (InfoA toInfoD) of128 byteseach.Each segment inmain memory is512 bytesinsize.
• Segments 0 ton may be erasedinone step,oreach segment may be individuallyerased.
• Segments InfoA to InfoD can be erased individually,or as a group withthe main memory segments. Segments InfoA toInfoD arealsocalledinformationmemory .
• Segment A can be lockedseparately. RAM Memory The RAM memory ismade up of n sectors.Each sectorcan be completelypowered down to save leakage, however alldataislost.FeaturesoftheRAM memory include:
• RAM memory has n sectorsof2k byteseach.
• Each sector0 ton can be completedisabled,however dataretentionislost.
• Each sector0 ton automaticallyenterslowpower retentionmode when possible. Copyright© 2009–2010,Texas InstrumentsIncorporated SubmitDocumentationFeedback 19

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailableCC430F613x CC430F612x CC430F513x SLAS554D –MAY 2009–REVISED JULY 2010 www.ti.com Peripherals Peripheralsare connectedtotheCPU throughdata,address,and controlbusses and can be handledusingall instructions.Forcompletemodule descriptions,see theCC430 FamilyUser's Guide,literaturenumber SLAU259 . Oscillatorand System Clock The UnifiedClock System (UCS) module includessupportfora 32768-Hz watch crystaloscillator,an internal very-low-powerlow-frequencyoscillator(VLO), an internaltrimmed low-frequencyoscillator(REFO), an integratedinternaldigitally-controlledoscillator(DCO), and a high-frequencycrystaloscillator.The UCS module isdesignedto meet the requirementsof both low system costand low-powerconsumption.The UCS module featuresdigitalfrequencylockedloop(FLL)hardwarethat,inconjunctionwitha digitalmodulator,stabilizesthe DCO frequencyto a programmable multipleof the watch crystalfrequency.The internalDCO providesa fast turn-onclocksourceand stabilizesinlessthan5 µs.The UCS module providesthefollowingclocksignals:

• Auxiliaryclock(ACLK), sourced from a 32768-Hz watch crystal,a high-frequencycrystal,the internal low-frequencyoscillator(VLO),orthetrimmedlow-frequencyoscillator(REFO).
• Main clock(MCLK), the system clockused by the CPU. MCLK can be sourced by same sourcesmade availabletoACLK.
• Sub-Main clock(SMCLK), thesubsystem clockused by theperipheralmodules.SMCLK can be sourcedby same sourcesmade availabletoACLK.
• ACLK/n,thebufferedoutputofACLK, ACLK/2,ACLK/4,ACLK/8,ACLK/16,ACLK/32. Power Management Module (PMM) The PMM includesan integratedvoltageregulatorthatsuppliesthe core voltageto the deviceand contains programmableoutputlevelstoprovideforpower optimization.The PMM alsoincludessupplyvoltagesupervisor (SVS) and supplyvoltagemonitoring(SVM) circuitry,as wellas brownoutprotection.The brownoutcircuitis implemented to providethe properinternalresetsignalto the deviceduringpower-on and power-off.The SVS/SVM circuitrydetectsifthe supplyvoltagedrops below a user-selectableleveland supportsboth supply voltagesupervision(thedeviceisautomaticallyreset)and supplyvoltagemonitoring(SVM, the deviceisnot automaticallyreset).SVS and SVM circuitryisavailableon theprimarysupplyand coresupply. DigitalI/O Thereareup tofive8-bitI/Oportsimplemented:portsP1 throughP5.
• AllindividualI/Obitsareindependentlyprogrammable.
• Any combinationofinput,output,and interruptconditionsispossible.
• Programmable pulluporpulldownon allports.
• Programmable drivestrengthon allports.
• Edge-selectableinterruptinputcapabilityforalltheeightbitsofportsP1 and P2.
• Read/writeaccesstoport-controlregistersissupportedby allinstructions.
• Portscan be accessedbyte-wise(P1 throughP5) orword-wiseinpairs(PA and PB).

20 SubmitDocumentationFeedback Copyright© 2009–2010,Texas InstrumentsIncorporated

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailable CC430F613x CC430F612x CC430F513x www.ti.com SLAS554D –MAY 2009–REVISED JULY 2010 PortMapping Controller The portmapping controllerallowsthe flexibleand re-configurablemapping of digitalfunctionsto portpinsof portsP1 throughP3. Table7.PortMapping, Mnemonics, and Functions Value PxMAPy Mnemonic InputPin Function(PxDIR.y=0) Output Pin Function(PxDIR.y=1)

0 PM_NONE None DVSS

Comparator_Boutput(onTA0 clockPM_CBOUT0 input)1(1) PM_TA0CLK TA0 clockinput - Comparator_Boutput(onTA1 clockPM_CBOUT1 - input)2(1) PM_TA1CLK TA1 clockinput -

3 PM_ACLK None ACLK output

4 PM_MCLK None MCLK output

5 PM_SMCLK None SMCLK output

6 PM_RTCCLK None RTCCLK output

PM_ADC12CLK - ADC12CLK output 7(1) PM_DMAE0 DMA externaltriggerinput -

8 PM_SVMOUT None SVM output

9 PM_TA0CCR0A TA0 CCR0 captureinputCCI0A TA0 CCR0 compare outputOut0

10 PM_TA0CCR1A TA0 CCR1 captureinputCCI1A TA0 CCR1 compare outputOut1

11 PM_TA0CCR2A TA0 CCR2 captureinputCCI2A TA0 CCR2 compare outputOut2

12 PM_TA0CCR3A TA0 CCR3 captureinputCCI3A TA0 CCR3 compare outputOut3

13 PM_TA0CCR4A TA0 CCR4 captureinputCCI4A TA0 CCR4 compare outputOut4

14 PM_TA1CCR0A TA1 CCR0 captureinputCCI0A TA1 CCR0 compare outputOut0

15 PM_TA1CCR1A TA1 CCR1 captureinputCCI1A TA1 CCR1 compare outputOut1

16 PM_TA1CCR2A TA1 CCR2 captureinputCCI2A TA1 CCR2 compare outputOut2

PM_UCA0RXD USCI_A0 UART RXD (Directioncontrolledby USCI -input) 17(2) PM_UCA0SOMI USCI_A0 SPI slaveoutmasterin(directioncontrolledby USCI) PM_UCA0TXD USCI_A0 UART TXD (Directioncontrolledby USCI -output) 18(2) PM_UCA0SIMO USCI_A0 SPI slaveinmasterout(directioncontrolledby USCI) PM_UCA0CLK USCI_A0 clockinput/output(directioncontrolledby USCI) 19(3) PM_UCB0STE USCI_B0 SPI slavetransmitenable(directioncontrolledby USCI -input) PM_UCB0SOMI USCI_B0 SPI slaveoutmasterin(directioncontrolledby USCI) 20(4) PM_UCB0SCL USCI_B0 I2C clock(opendrainand directioncontrolledby USCI) PM_UCB0SIMO USCI_B0 SPI slaveinmasterout(directioncontrolledby USCI) 21(4) PM_UCB0SDA USCI_B0 I2C data(opendrainand directioncontrolledby USCI) PM_UCB0CLK USCI_B0 clockinput/output(directioncontrolledby USCI) 22(5) PM_UCA0STE USCI_A0 SPI slavetransmitenable(directioncontrolledby USCI -input)

23 PM_RFGDO0 RadioGDO0 (directioncontrolledby Radio)

24 PM_RFGDO1 RadioGDO1 (directioncontrolledby Radio)

25 PM_RFGDO2 RadioGDO2 (directioncontrolledby Radio)

26 Reserved None DVSS

(1) Inputoroutputfunctionisselectedby thecorrespondingsettingintheportdirectionregisterPxDIR. (2) UART orSPI functionalityisdeterminedby theselectedUSCI mode. (3) UCA0CLK functiontakesprecedenceoverUCB0STE function.Ifthemapped pinisrequiredas UCA0CLK inputoroutputUSCI_B0 will be forcedto3-wireSPI mode even if4-wiremode isselected. (4) SPI orI2C functionalityisdeterminedby theselectedUSCI mode. Incase theI2C functionalityisselectedtheoutputofthemapped pin drivesonlythelogical0 toVSS level. (5) UCB0CLK functiontakesprecedenceoverUCA0STE function.Ifthemapped pinisrequiredas UCB0CLK inputoroutputUSCI_A0 will be forcedto3-wireSPI mode even if4-wiremode isselected. Copyright© 2009–2010,Texas InstrumentsIncorporated SubmitDocumentationFeedback 21

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailableCC430F613x CC430F612x CC430F513x SLAS554D –MAY 2009–REVISED JULY 2010 www.ti.com Table7.PortMapping, Mnemonics, and Functions(continued) Value PxMAPy Mnemonic InputPin Function(PxDIR.y=0) Output Pin Function(PxDIR.y=1)

27 Reserved None DVSS

28 Reserved None DVSS

29 Reserved None DVSS

30 Reserved None DVSS

Disablestheoutputdriveras wellas theinputSchmitt-triggertoprevent31 (0FFh)(6) PM_ANALOG parasiticcrosscurrentswhen applyinganalogsignals. (6) The valueofthePMPAP_ANALOG mnemonic issetto0FFh.The portmapping registersareonly5 bitswideand theupperbitsare ignoredresultingina readoutvalueof31. Table8.DefaultMapping Pin PxMAPy Mnemonic InputPin Function(PxDIR.y=0) Output Pin Function(PxDIR.y=1) P1.0/P1MAP0 PM_RFGDO0 None RadioGDO0 P1.1/P1MAP1 PM_RFGDO2 None RadioGDO2 USCI_B0 SPI slaveoutmasterin(directioncontrolledby USCI)/USCI_B0P1.2/P1MAP2 PM_UCB0SOMI/PM_UCB0SCL I2C clock(opendrainand directioncontrolledby USCI) USCI_B0 SPI slaveinmasterout(directioncontrolledby USCI)/USCI_B0P1.3/P1MAP3 PM_UCB0SIMO/PM_UCB0SDA I2C data(opendrainand directioncontrolledby USCI) USCI_B0 clockinput/output(directioncontrolledby USCI)/USCI_A0 SPIP1.4/P1MAP4 PM_UCB0CLK/PM_UCA0STE slavetransmitenable(directioncontrolledby USCI -input) USCI_A0 UART RXD (Directioncontrolledby USCI -input)/USCI_A0SPIP1.5/P1MAP5 PM_UCA0RXD/PM_UCA0SOMI slaveoutmasterin(directioncontrolledby USCI) USCI_A0 UART TXD (Directioncontrolledby USCI -output)/USCI_A0P1.6/P1MAP6 PM_UCA0TXD/PM_UCA0SIMO SPI slaveinmasterout(directioncontrolledby USCI) USCI_A0 clockinput/output(directioncontrolledby USCI)/USCI_B0 SPIP1.7/P1MAP7 PM_UCA0CLK/PM_UCB0STE slavetransmitenable(directioncontrolledby USCI -input) P2.0/P2MAP0 PM_CBOUT1/PM_TA1CLK TA1 clockinput Comparator_Boutput P2.1/P2MAP1 PM_TA1CCR0A TA1 CCR0 captureinputCCI0A TA1 CCR0 compare outputOut0 P2.2/P2MAP2 PM_TA1CCR1A TA1 CCR1 captureinputCCI1A TA1 CCR1 compare outputOut1 P2.3/P2MAP3 PM_TA1CCR2A TA1 CCR2 captureinputCCI2A TA1 CCR2 compare outputOut2 P2.4/P2MAP4 PM_RTCCLK None RTCCLK output P2.5/P2MAP5 PM_SVMOUT None SVM output P2.6/P2MAP6 PM_ACLK None ACLK output P2.7/P2MAP7 PM_ADC12CLK/PM_DMAE0 DMA externaltriggerinput ADC12CLK output P3.0/P3MAP0 PM_CBOUT0/PM_TA0CLK TA0 clockinput Comparator_Boutput P3.1/P3MAP1 PM_TA0CCR0A TA0 CCR0 captureinputCCI0A TA0 CCR0 compare outputOut0 P3.2/P3MAP2 PM_TA0CCR1A TA0 CCR1 captureinputCCI1A TA0 CCR1 compare outputOut1 P3.3/P3MAP3 PM_TA0CCR2A TA0 CCR2 captureinputCCI2A TA0 CCR2 compare outputOut2 P3.4/P3MAP4 PM_TA0CCR3A TA0 CCR3 captureinputCCI3A TA0 CCR3 compare outputOut3 P3.5/P3MAP5 PM_TA0CCR4A TA0 CCR4 captureinputCCI4A TA0 CCR4 compare outputOut4 P3.6/P3MAP6 PM_RFGDO1 None RadioGDO1 P3.7/P3MAP7 PM_SMCLK None SMCLK output

22 SubmitDocumentationFeedback Copyright© 2009–2010,Texas InstrumentsIncorporated

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailable CC430F613x CC430F612x CC430F513x www.ti.com SLAS554D –MAY 2009–REVISED JULY 2010 System Module (SYS) The SYS module handlesmany of the system functionswithinthe device.These includepower on resetand power up clearhandling,NMI sourceselectionand management, resetinterruptvectorgenerators,boot strap loaderentrymechanisms, as wellas,configurationmanagement (devicedescriptors).Italsoincludesa data exchange mechanism viaJTAG calleda JTAG mailboxthatcan be used intheapplication. Table9.System Module InterruptVectorRegisters INTERRUPT VECTOR REGISTER ADDRESS INTERRUPT EVENT VALUE PRIORITY SYSRSTIV ,System Reset 019Eh No interruptpending 00h Brownout(BOR) 02h Highest RST/NMI (POR) 04h DoBOR (BOR) 06h Reserved 08h Securityviolation(BOR) 0Ah SVSL (POR) 0Ch SVSH (POR) 0Eh SVML_OVP (POR) 10h SVMH_OVP (POR) 12h DoPOR (POR) 14h WDT timeout(PUC) 16h WDT passwordviolation(PUC) 18h KEYV flashpasswordviolation(PUC) 1Ah FLL unlock(PUC) 1Ch Peripheralareafetch(PUC) 1Eh PMM passwordviolation(PUC) 20h Reserved 22h to3Eh Lowest SYSSNIV ,System NMI 019Ch No interruptpending 00h SVMLIFG 02h Highest SVMHIFG 04h DLYLIFG 06h DLYHIFG 08h VMAIFG 0Ah JMBINIFG 0Ch JMBOUTIFG 0Eh VLRLIFG 10h VLRHIFG 12h Reserved 14h to1Eh Lowest SYSUNIV, User NMI 019Ah No interruptpending 00h NMIFG 02h Highest OFIFG 04h ACCVIFG 06h Reserved 08h to1Eh Lowest Copyright© 2009–2010,Texas InstrumentsIncorporated SubmitDocumentationFeedback 23

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailableCC430F613x CC430F612x CC430F513x SLAS554D –MAY 2009–REVISED JULY 2010 www.ti.com DMA Controller The DMA controllerallowsmovement of data from one memory addressto anotherwithoutCPU intervention. Using the DMA controllercan increasethe throughputof peripheralmodules. The DMA controllerreduces system power consumptionby allowingthe CPU to remain insleepmode, withouthavingto awaken to move datatoorfroma peripheral. Table10.DMA TriggerAssignments (1) Channel Trigger 0 1 2

0 DMAREQ DMAREQ DMAREQ

1 TA0CCR0 CCIFG TA0CCR0 CCIFG TA0CCR0 CCIFG

2 TA0CCR2 CCIFG TA0CCR2 CCIFG TA0CCR2 CCIFG

3 TA1CCR0 CCIFG TA1CCR0 CCIFG TA1CCR0 CCIFG

4 TA1CCR2 CCIFG TA1CCR2 CCIFG TA1CCR2 CCIFG

5 Reserved Reserved Reserved

6 Reserved Reserved Reserved

7 Reserved Reserved Reserved

8 Reserved Reserved Reserved

9 Reserved Reserved Reserved

10 Reserved Reserved Reserved

11 Reserved Reserved Reserved

12 Reserved Reserved Reserved

13 Reserved Reserved Reserved

14 RFRXIFG RFRXIFG RFRXIFG

15 RFTXIFG RFTXIFG RFTXIFG

16 UCA0RXIFG UCA0RXIFG UCA0RXIFG

17 UCA0TXIFG UCA0TXIFG UCA0TXIFG

18 UCB0RXIFG UCB0RXIFG UCB0RXIFG

19 UCB0TXIFG UCB0TXIFG UCB0TXIFG

20 Reserved Reserved Reserved

21 Reserved Reserved Reserved

22 Reserved Reserved Reserved

23 Reserved Reserved Reserved

24 ADC12IFGx (2) ADC12IFGx (2) ADC12IFGx (2)

25 Reserved Reserved Reserved

26 Reserved Reserved Reserved

27 Reserved Reserved Reserved

28 Reserved Reserved Reserved

29 MPY ready MPY ready MPY ready

30 DMA2IFG DMA0IFG DMA1IFG

31 DMAE0 DMAE0 DMAE0

(1) ReservedDMA triggersmay be used by otherdevicesinthefamily.ReservedDMA triggerswillnot cause any DMA triggereventwhen selected. (2) Onlyon CC430F613x and CC430F513x. Reservedon CC430F612x. Watchdog Timer (WDT_A) The primaryfunctionof the watchdog timeristo performa controlledsystem restartaftera softwareproblem occurs.Iftheselectedtimeintervalexpires,a system resetisgenerated.Ifthewatchdog functionisnotneeded inan application,thetimercan be configuredas an intervaltimerand can generateinterruptsatselectedtime intervals.

24 SubmitDocumentationFeedback Copyright© 2009–2010,Texas InstrumentsIncorporated

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailable CC430F613x CC430F612x CC430F513x www.ti.com SLAS554D –MAY 2009–REVISED JULY 2010 CRC16 The CRC16 module producesa signaturebased on a sequence ofentereddatavaluesand can be used fordata checkingpurposes.The CRC16 module signatureisbased on theCRC-CCITT standard. Hardware Multiplier The multiplicationoperationissupportedby a dedicatedperipheralmodule.The module performsoperationswith 32-bit,24-bit,16-bit,and 8-bitoperands.The module iscapableofsupportingsignedand unsignedmultiplication as wellas signedand unsignedmultiplyand accumulateoperations. AES128 Accelerator The AES acceleratormodule performsencryptionand decryptionof128-bitdatawith128-bitkeys accordingto theAdvanced EncryptionStandard(AES) (FIPSPUB 197)inhardware. UniversalSerialCommunication Interface(USCI) The USCI module is used for serialdata communication.The USCI module supports synchronous communicationprotocolssuch as SPI (3or4 pin)and I2C, and asynchronouscommunicationprotocolssuch as UART, enhanced UART withautomaticbaudratedetection,and IrDA. The USCI_An module providessupportforSPI (3or4 pin),UART, enhanced UART, and IrDA. The USCI_Bn module providessupportforSPI (3or4 pin)and I2C. A USCI_A0 and USCI_B0 module areimplemented. Copyright© 2009–2010,Texas InstrumentsIncorporated SubmitDocumentationFeedback 25

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailableCC430F613x CC430F612x CC430F513x SLAS554D –MAY 2009–REVISED JULY 2010 www.ti.com TA0 TA0 is a 16-bittimer/counter(Timer_A type)withfivecapture/compareregisters.TA0 can supportmultiple capture/compares,PWM outputs,and intervaltiming.TA0 alsohas extensiveinterruptcapabilities.Interrupts may be generatedfromthecounteron overflowconditionsand fromeach ofthecapture/compareregisters. Table11.TA0 SignalConnections MODULE OUTPUT DEVICE OUTPUTDEVICE INPUT SIGNAL MODULE INPUT NAME MODULE BLOCK SIGNAL SIGNAL PM_TA0CLK TACLK ACLK (internal) ACLK Timer NA SMCLK (internal) SMCLK RFCLK/192 (1) INCLK PM_TA0CCR0A CCI0A PM_TA0CCR0A DV SS CCI0B CCR0 TA0 DV SS GND DV CC VCC PM_TA0CCR1A CCI1A PM_TA0CCR1A ADC12 (internal)(2) CBOUT (internal) CCI1B ADC12SHSx = {1}CCR1 TA1 DV SS GND DV CC VCC PM_TA0CCR2A CCI2A PM_TA0CCR2A ACLK (internal) CCI2B CCR2 TA2 DV SS GND DV CC VCC PM_TA0CCR3A CCI3A PM_TA0CCR3A GDO1 fromRadio CCI3B(internal) CCR3 TA3 DV SS GND DV CC VCC PM_TA0CCR4A CCI4A PM_TA0CCR4A GDO2 fromRadio CCI4B(internal) CCR4 TA4 DV SS GND DV CC VCC (1) Ifa differentRFCLK dividersettingisselectedfora radioGDO output,thisdividersettingisalsoused fortheTimer_A INCLK. (2) Onlyon CC430F613x and CC430F513x

26 SubmitDocumentationFeedback Copyright© 2009–2010,Texas InstrumentsIncorporated

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailable CC430F613x CC430F612x CC430F513x www.ti.com SLAS554D –MAY 2009–REVISED JULY 2010 TA1 TA1 isa 16-bittimer/counter(Timer_A type)withthreecapture/compareregisters.TA1 can supportmultiple capture/compares,PWM outputs,and intervaltiming.TA1 alsohas extensiveinterruptcapabilities.Interrupts may be generatedfromthecounteron overflowconditionsand fromeach ofthecapture/compareregisters. Table12.TA1 SignalConnections DEVICE OUTPUT MODULE OUTPUT SIGNALDEVICE INPUT SIGNAL MODULE INPUT NAME MODULE BLOCK SIGNAL PZ PM_TA1CLK TACLK ACLK (internal) ACLK Timer NA SMCLK (internal) SMCLK RFCLK/192 (1) INCLK PM_TA1CCR0A CCI0A PM_TA1CCR0A RF Async.Output CCI0B RF Async.Input(internal)(internal) CCR0 TA0 DV SS GND DV CC VCC PM_TA1CCR1A CCI1A PM_TA1CCR1A CBOUT (internal) CCI1B CCR1 TA1 DV SS GND DV CC VCC PM_TA1CCR2A CCI2A PM_TA1CCR2A ACLK (internal) CCI2B CCR2 TA2 DV SS GND DV CC VCC (1) Ifa differentRFCLK dividersettingisselectedfora radioGDO output,thisdividersettingisalsoused fortheTimer_A INCLK. Real-TimeClock (RTC_A) The RTC_A module can be used as a general-purpose32-bitcounter(countermode) or as an integrated real-timeclock(RTC) (calendarmode).Incountermode, theRTC_A alsoincludestwo independent8-bittimers thatcan be cascaded toforma 16-bittimer/counter.Both timerscan be readand writtenby software.Calendar mode integratesan internalcalendarwhich compensates formonths withlessthan31 days and includesleap yearcorrection.The RTC_A alsosupportsflexiblealarmfunctionsand offset-calibrationhardware. REF VoltageReference The referencemodule (REF) isresponsibleforgenerationofallcriticalreferencevoltagesthatcan be used by thevariousanalogperipheralsinthedevice.These includetheADC12_A, LCD_B, and COMP_B modules. LCD_B (OnlyCC430F613x and CC430F612x) The LCD_B drivergeneratesthesegment and common signalsrequiredtodrivea LiquidCrystalDisplay(LCD). The LCD_B controllerhas dedicateddatamemories toholdsegment driveinformation.Common and segment signalsare generatedas definedby the mode. Static,2-mux, 3-mux, and 4-mux LCDs are supported.The module can providea LCD voltageindependentof the supplyvoltagewithitsintegratedcharge pump. Itis possibleto controlthe levelof the LCD voltageand thuscontrastby software.The module alsoprovidesan automaticblinkingcapabilityforindividualsegments. Comparator_B The primaryfunctionof the Comparator_B module isto supportprecisionslopeanalog-to-digitalconversions, batteryvoltagesupervision,and monitoringofexternalanalogsignals. Copyright© 2009–2010,Texas InstrumentsIncorporated SubmitDocumentationFeedback 27

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailableCC430F613x CC430F612x CC430F513x SLAS554D –MAY 2009–REVISED JULY 2010 www.ti.com ADC12_A (OnlyCC430F613x and CC430F513x) The ADC12_A module supportsfast,12-bitanalog-to-digitalconversions.The module implementsa 12-bitSAR core, sample selectcontrol,referencegeneratorand a 16 word conversion-and-controlbuffer.The conversion-and-controlbufferallowsup to16 independentADC samples tobe convertedand storedwithoutany CPU intervention. Embedded EmulationModule (EEM, S Version) The Embedded EmulationModule (EEM) supportsreal-timein-systemdebugging.The S versionof the EEM implementedon alldeviceshas thefollowingfeatures:

• Threehardwaretriggers/breakpointson memory access
• One hardwaretrigger/breakpointon CPU registerwriteaccess
• Up tofourhardwaretriggerscan be combined toformcomplextriggers/breakpoints
• One cyclecounter
• Clockcontrolon module level

28 SubmitDocumentationFeedback Copyright© 2009–2010,Texas InstrumentsIncorporated

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailable CC430F613x CC430F612x CC430F513x www.ti.com SLAS554D –MAY 2009–REVISED JULY 2010 PeripheralFileMap Table13.Peripherals OFFSET ADDRESSMODULE NAME BASE ADDRESS RANGE SpecialFunctions(refertoTable14) 0100h 000h -01Fh PMM (refertoTable15) 0120h 000h -00Fh FlashControl(refertoTable16) 0140h 000h -00Fh CRC16 (refertoTable17) 0150h 000h -007h RAM Control(refertoTable18) 0158h 000h -001h Watchdog (refertoTable19) 015Ch 000h -001h UCS (refertoTable20) 0160h 000h -01Fh SYS (refertoTable21) 0180h 000h -01Fh Shared Reference(refertoTable22) 01B0h 000h -001h PortMapping Control(refertoTable23) 01C0h 000h -007h PortMapping PortP1 (refertoTable24) 01C8h 000h -007h PortMapping PortP2 (refertoTable25) 01D0h 000h -007h PortMapping PortP3 (refertoTable26) 01D8h 000h -007h PortP1/P2 (refertoTable27) 0200h 000h -01Fh PortP3/P4 (P4 notavailableon CC430F513x) 0220h 000h -01Fh(refertoTable28) PortP5 (refertoTable29) 0240h 000h -01Fh PortPJ (refertoTable30) 0320h 000h -01Fh TA0 (refertoTable31) 0340h 000h -03Fh TA1 (refertoTable32) 0380h 000h -03Fh RTC_A (refertoTable33) 04A0h 000h -01Fh 32-bitHardware Multiplier(refertoTable34) 04C0h 000h -02Fh DMA Module Control(refertoTable35) 0500h 000h -00Fh DMA Channel0 (refertoTable36) 0510h 000h -00Fh DMA Channel1 (refertoTable37) 0520h 000h -00Fh DMA Channel2 (refertoTable38) 0530h 000h -00Fh USCI_A0 (refertoTable39) 05C0h 000h -01Fh USCI_B0 (refertoTable40) 05E0h 000h -01Fh ADC12 (refertoTable41,onlyCC430F613x and 0700h 000h -03FhCC430F513x) Comparator_B(refertoTable42) 08C0h 000h -00Fh AES Accelerator(refertoTable43) 09C0h 000h -00Fh LCD_B (refertoTable44,onlyCC430F613x and 0A00h 000h -05FhCC430F612x) RadioInterface(refertoTable45) 0F00h 000h -03Fh Copyright© 2009–2010,Texas InstrumentsIncorporated SubmitDocumentationFeedback 29

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailableCC430F613x CC430F612x CC430F513x SLAS554D –MAY 2009–REVISED JULY 2010 www.ti.com Table14.SpecialFunctionRegisters(Base Address: 0100h) REGISTER DESCRIPTION REGISTER OFFSET SFR interruptenable SFRIE1 00h SFR interruptflag SFRIFG1 02h SFR resetpincontrol SFRRPCR 04h Table15.PMM Registers(Base Address: 0120h) REGISTER DESCRIPTION REGISTER OFFSET PMM Control0 PMMCTL0 00h PMM control1 PMMCTL1 02h SVS highsidecontrol SVSMHCTL 04h SVS lowsidecontrol SVSMLCTL 06h PMM interruptflags PMMIFG 0Ch PMM interruptenable PMMIE 0Eh PMM power mode 5 control PM5CTL0 10h Table16.FlashControlRegisters(Base Address: 0140h) REGISTER DESCRIPTION REGISTER OFFSET Flashcontrol1 FCTL1 00h Flashcontrol3 FCTL3 04h Flashcontrol4 FCTL4 06h Table17.CRC16 Registers(Base Address: 0150h) REGISTER DESCRIPTION REGISTER OFFSET CRC datainput CRC16DI 00h CRC datainputreversebyte CRCDIRB 02h CRC initializationand result CRCINIRES 04h CRC resultreversebyte CRCRESR 06h Table18.RAM ControlRegisters(Base Address: 0158h) REGISTER DESCRIPTION REGISTER OFFSET RAM control0 RCCTL0 00h Table19.Watchdog Registers(Base Address: 015Ch) REGISTER DESCRIPTION REGISTER OFFSET Watchdog timercontrol WDTCTL 00h Table20.UCS Registers(Base Address: 0160h) REGISTER DESCRIPTION REGISTER OFFSET UCS control0 UCSCTL0 00h UCS control1 UCSCTL1 02h UCS control2 UCSCTL2 04h UCS control3 UCSCTL3 06h UCS control4 UCSCTL4 08h UCS control5 UCSCTL5 0Ah UCS control6 UCSCTL6 0Ch UCS control7 UCSCTL7 0Eh UCS control8 UCSCTL8 10h

30 SubmitDocumentationFeedback Copyright© 2009–2010,Texas InstrumentsIncorporated

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailable CC430F613x CC430F612x CC430F513x www.ti.com SLAS554D –MAY 2009–REVISED JULY 2010 Table21.SYS Registers(Base Address: 0180h) REGISTER DESCRIPTION REGISTER OFFSET System control SYSCTL 00h Bootstraploaderconfigurationarea SYSBSLC 02h JTAG mailboxcontrol SYSJMBC 06h JTAG mailboxinput0 SYSJMBI0 08h JTAG mailboxinput1 SYSJMBI1 0Ah JTAG mailboxoutput0 SYSJMBO0 0Ch JTAG mailboxoutput1 SYSJMBO1 0Eh Bus Errorvectorgenerator SYSBERRIV 18h User NMI vectorgenerator SYSUNIV 1Ah System NMI vectorgenerator SYSSNIV 1Ch Resetvectorgenerator SYSRSTIV 1Eh Table22.Shared ReferenceRegisters(Base Address: 01B0h) REGISTER DESCRIPTION REGISTER OFFSET Shared referencecontrol REFCTL 00h Table23.PortMapping ControlRegisters(Base Address: 01C0h) REGISTER DESCRIPTION REGISTER OFFSET Portmapping key register PMAPKEYID 00h Portmapping controlregister PMAPCTL 02h Table24.PortMapping PortP1 Registers(Base Address: 01C8h) REGISTER DESCRIPTION REGISTER OFFSET PortP1.0mapping register P1MAP0 00h PortP1.1mapping register P1MAP1 01h PortP1.2mapping register P1MAP2 02h PortP1.3mapping register P1MAP3 03h PortP1.4mapping register P1MAP4 04h PortP1.5mapping register P1MAP5 05h PortP1.6mapping register P1MAP6 06h PortP1.7mapping register P1MAP7 07h Table25.PortMapping PortP2 Registers(Base Address: 01D0h) REGISTER DESCRIPTION REGISTER OFFSET PortP2.0mapping register P2MAP0 00h PortP2.1mapping register P2MAP2 01h PortP2.2mapping register P2MAP2 02h PortP2.3mapping register P2MAP3 03h PortP2.4mapping register P2MAP4 04h PortP2.5mapping register P2MAP5 05h PortP2.6mapping register P2MAP6 06h PortP2.7mapping register P2MAP7 07h Table26.PortMapping PortP3 Registers(Base Address: 01D8h) REGISTER DESCRIPTION REGISTER OFFSET PortP3.0mapping register P3MAP0 00h PortP3.1mapping register P3MAP3 01h Copyright© 2009–2010,Texas InstrumentsIncorporated SubmitDocumentationFeedback 31

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailableCC430F613x CC430F612x CC430F513x SLAS554D –MAY 2009–REVISED JULY 2010 www.ti.com Table26.PortMapping PortP3 Registers(Base Address: 01D8h) (continued) REGISTER DESCRIPTION REGISTER OFFSET PortP3.2mapping register P3MAP2 02h PortP3.3mapping register P3MAP3 03h PortP3.4mapping register P3MAP4 04h PortP3.5mapping register P3MAP5 05h PortP3.6mapping register P3MAP6 06h PortP3.7mapping register P3MAP7 07h Table27.PortP1/P2 Registers(Base Address: 0200h) REGISTER DESCRIPTION REGISTER OFFSET PortP1 input P1IN 00h PortP1 output P1OUT 02h PortP1 direction P1DIR 04h PortP1 pullup/pulldownenable P1REN 06h PortP1 drivestrength P1DS 08h PortP1 selection P1SEL 0Ah PortP1 interruptvectorword P1IV 0Eh PortP1 interruptedge select P1IES 18h PortP1 interruptenable P1IE 1Ah PortP1 interruptflag P1IFG 1Ch PortP2 input P2IN 01h PortP2 output P2OUT 03h PortP2 direction P2DIR 05h PortP2 pullup/pulldownenable P2REN 07h PortP2 drivestrength P2DS 09h PortP2 selection P2SEL 0Bh PortP2 interruptvectorword P2IV 1Eh PortP2 interruptedge select P2IES 19h PortP2 interruptenable P2IE 1Bh PortP2 interruptflag P2IFG 1Dh Table28.PortP3/P4 Registers(Base Address: 0220h) REGISTER DESCRIPTION REGISTER OFFSET PortP3 input P3IN 00h PortP3 output P3OUT 02h PortP3 direction P3DIR 04h PortP3 pullup/pulldownenable P3REN 06h PortP3 drivestrength P3DS 08h PortP3 selection P3SEL 0Ah PortP4 input P4IN 01h PortP4 output P4OUT 03h PortP4 direction P4DIR 05h PortP4 pullup/pulldownenable P4REN 07h PortP4 drivestrength P4DS 09h PortP4 selection P4SEL 0Bh

32 SubmitDocumentationFeedback Copyright© 2009–2010,Texas InstrumentsIncorporated

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailable CC430F613x CC430F612x CC430F513x www.ti.com SLAS554D –MAY 2009–REVISED JULY 2010 Table29.PortP5 Registers(Base Address: 0240h) REGISTER DESCRIPTION REGISTER OFFSET PortP5 input P5IN 00h PortP5 output P5OUT 02h PortP5 direction P5DIR 04h PortP5 pullup/pulldownenable P5REN 06h PortP5 drivestrength P5DS 08h PortP5 selection P5SEL 0Ah Table30.PortJ Registers(Base Address: 0320h) REGISTER DESCRIPTION REGISTER OFFSET PortPJ input PJIN 00h PortPJ output PJOUT 02h PortPJ direction PJDIR 04h PortPJ pullup/pulldownenable PJREN 06h PortPJ drivestrength PJDS 08h Table31.TA0 Registers(Base Address: 0340h) REGISTER DESCRIPTION REGISTER OFFSET TA0 control TA0CTL 00h Capture/comparecontrol0 TA0CCTL0 02h Capture/comparecontrol1 TA0CCTL1 04h Capture/comparecontrol2 TA0CCTL2 06h Capture/comparecontrol3 TA0CCTL3 08h Capture/comparecontrol4 TA0CCTL4 0Ah TA0 counterregister TA0R 10h Capture/compareregister0 TA0CCR0 12h Capture/compareregister1 TA0CCR1 14h Capture/compareregister2 TA0CCR2 16h Capture/compareregister3 TA0CCR3 18h Capture/compareregister4 TA0CCR4 1Ah TA0 expansionregister0 TA0EX0 20h TA0 interruptvector TA0IV 2Eh Table32.TA1 Registers(Base Address: 0380h) REGISTER DESCRIPTION REGISTER OFFSET TA1 control TA1CTL 00h Capture/comparecontrol0 TA1CCTL0 02h Capture/comparecontrol1 TA1CCTL1 04h Capture/comparecontrol2 TA1CCTL2 06h TA1 counterregister TA1R 10h Capture/compareregister0 TA1CCR0 12h Capture/compareregister1 TA1CCR1 14h Capture/compareregister2 TA1CCR2 16h TA1 expansionregister0 TA1EX0 20h TA1 interruptvector TA1IV 2Eh Copyright© 2009–2010,Texas InstrumentsIncorporated SubmitDocumentationFeedback 33

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailableCC430F613x CC430F612x CC430F513x SLAS554D –MAY 2009–REVISED JULY 2010 www.ti.com Table33.Real Time Clock Registers(Base Address: 04A0h) REGISTER DESCRIPTION REGISTER OFFSET RTC control0 RTCCTL0 00h RTC control1 RTCCTL1 01h RTC control2 RTCCTL2 02h RTC control3 RTCCTL3 03h RTC prescaler0 control RTCPS0CTL 08h RTC prescaler1 control RTCPS1CTL 0Ah RTC prescaler0 RTCPS0 0Ch RTC prescaler1 RTCPS1 0Dh RTC interruptvectorword RTCIV 0Eh RTC seconds/counterregister1 RTCSEC/RTCNT1 10h RTC minutes/counterregister2 RTCMIN/RTCNT2 11h RTC hours/counterregister3 RTCHOUR/RTCNT3 12h RTC day ofweek/counterregister4 RTCDOW/RTCNT4 13h RTC days RTCDAY 14h RTC month RTCMON 15h RTC yearlow RTCYEARL 16h RTC yearhigh RTCYEARH 17h RTC alarmminutes RTCAMIN 18h RTC alarmhours RTCAHOUR 19h RTC alarmday ofweek RTCADOW 1Ah RTC alarmdays RTCADAY 1Bh Table34.32-bitHardware MultiplierRegisters(Base Address: 04C0h) REGISTER DESCRIPTION REGISTER OFFSET 16-bitoperand1 – multiply MPY 00h 16-bitoperand1 – signedmultiply MPYS 02h 16-bitoperand1 – multiplyaccumulate MAC 04h 16-bitoperand1 – signedmultiplyaccumulate MACS 06h 16-bitoperand2 OP2 08h 16 × 16 resultlowword RESLO 0Ah 16 × 16 resulthighword RESHI 0Ch 16 × 16 sum extensionregister SUMEXT 0Eh 32-bitoperand1 – multiplylowword MPY32L 10h 32-bitoperand1 – multiplyhighword MPY32H 12h 32-bitoperand1 – signedmultiplylowword MPYS32L 14h 32-bitoperand1 – signedmultiplyhighword MPYS32H 16h 32-bitoperand1 – multiplyaccumulatelowword MAC32L 18h 32-bitoperand1 – multiplyaccumulatehighword MAC32H 1Ah 32-bitoperand1 – signedmultiplyaccumulatelowword MACS32L 1Ch 32-bitoperand1 – signedmultiplyaccumulatehighword MACS32H 1Eh 32-bitoperand2 – lowword OP2L 20h 32-bitoperand2 – highword OP2H 22h 32 × 32 result0 – leastsignificantword RES0 24h 32 × 32 result1 RES1 26h 32 × 32 result2 RES2 28h 32 × 32 result3 – most significantword RES3 2Ah MPY32 controlregister0 MPY32CTL0 2Ch

34 SubmitDocumentationFeedback Copyright© 2009–2010,Texas InstrumentsIncorporated

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailable CC430F613x CC430F612x CC430F513x www.ti.com SLAS554D –MAY 2009–REVISED JULY 2010 Table35.DMA Module ControlRegisters(Base Address: 0500h) REGISTER DESCRIPTION REGISTER OFFSET DMA module control0 DMACTL0 00h DMA module control1 DMACTL1 02h DMA module control2 DMACTL2 04h DMA module control3 DMACTL3 06h DMA module control4 DMACTL4 08h DMA interruptvector DMAIV 0Ah Table36.DMA Channel 0 Registers(Base Address: 0510h) REGISTER DESCRIPTION REGISTER OFFSET DMA channel0 control DMA0CTL 00h DMA channel0 sourceaddresslow DMA0SAL 02h DMA channel0 sourceaddresshigh DMA0SAH 04h DMA channel0 destinationaddresslow DMA0DAL 06h DMA channel0 destinationaddresshigh DMA0DAH 08h DMA channel0 transfersize DMA0SZ 0Ah Table37.DMA Channel 1 Registers(Base Address: 0520h) REGISTER DESCRIPTION REGISTER OFFSET DMA channel1 control DMA1CTL 00h DMA channel1 sourceaddresslow DMA1SAL 02h DMA channel1 sourceaddresshigh DMA1SAH 04h DMA channel1 destinationaddresslow DMA1DAL 06h DMA channel1 destinationaddresshigh DMA1DAH 08h DMA channel1 transfersize DMA1SZ 0Ah Table38.DMA Channel 2 Registers(Base Address: 0530h) REGISTER DESCRIPTION REGISTER OFFSET DMA channel2 control DMA2CTL 00h DMA channel2 sourceaddresslow DMA2SAL 02h DMA channel2 sourceaddresshigh DMA2SAH 04h DMA channel2 destinationaddresslow DMA2DAL 06h DMA channel2 destinationaddresshigh DMA2DAH 08h DMA channel2 transfersize DMA2SZ 0Ah Copyright© 2009–2010,Texas InstrumentsIncorporated SubmitDocumentationFeedback 35

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailableCC430F613x CC430F612x CC430F513x SLAS554D –MAY 2009–REVISED JULY 2010 www.ti.com Table39.USCI_A0 Registers(Base Address: 05C0h) REGISTER DESCRIPTION REGISTER OFFSET USCI control0 UCA0CTL0 00h USCI control1 UCA0CTL1 01h USCI baud rate0 UCA0BR0 06h USCI baud rate1 UCA0BR1 07h USCI modulationcontrol UCA0MCTL 08h USCI status UCA0STAT 0Ah USCI receivebuffer UCA0RXBUF 0Ch USCI transmitbuffer UCA0TXBUF 0Eh USCI LIN control UCA0ABCTL 10h USCI IrDAtransmitcontrol UCA0IRTCTL 12h USCI IrDAreceivecontrol UCA0IRRCTL 13h USCI interruptenable UCA0IE 1Ch USCI interruptflags UCA0IFG 1Dh USCI interruptvectorword UCA0IV 1Eh Table40.USCI_B0 Registers(Base Address: 05E0h) REGISTER DESCRIPTION REGISTER OFFSET USCI synchronouscontrol0 UCB0CTL0 00h USCI synchronouscontrol1 UCB0CTL1 01h USCI synchronousbitrate0 UCB0BR0 06h USCI synchronousbitrate1 UCB0BR1 07h USCI synchronousstatus UCB0STAT 0Ah USCI synchronousreceivebuffer UCB0RXBUF 0Ch USCI synchronoustransmitbuffer UCB0TXBUF 0Eh USCI I2C own address UCB0I2COA 10h USCI I2C slaveaddress UCB0I2CSA 12h USCI interruptenable UCB0IE 1Ch USCI interruptflags UCB0IFG 1Dh USCI interruptvectorword UCB0IV 1Eh

36 SubmitDocumentationFeedback Copyright© 2009–2010,Texas InstrumentsIncorporated

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailable CC430F613x CC430F612x CC430F513x www.ti.com SLAS554D –MAY 2009–REVISED JULY 2010 Table41.ADC12_A Registers(Base Address: 0700h) REGISTER DESCRIPTION REGISTER OFFSET Controlregister0 ADC12CTL0 00h Controlregister1 ADC12CTL1 02h Controlregister2 ADC12CTL2 04h Interrupt-flagregister ADC12IFG 0Ah Interrupt-enableregister ADC12IE 0Ch Interrupt-vector-wordregister ADC12IV 0Eh ADC memory-controlregister0 ADC12MCTL0 10h ADC memory-controlregister1 ADC12MCTL1 11h ADC memory-controlregister2 ADC12MCTL2 12h ADC memory-controlregister3 ADC12MCTL3 13h ADC memory-controlregister4 ADC12MCTL4 14h ADC memory-controlregister5 ADC12MCTL5 15h ADC memory-controlregister6 ADC12MCTL6 16h ADC memory-controlregister7 ADC12MCTL7 17h ADC memory-controlregister8 ADC12MCTL8 18h ADC memory-controlregister9 ADC12MCTL9 19h ADC memory-controlregister10 ADC12MCTL10 1Ah ADC memory-controlregister11 ADC12MCTL11 1Bh ADC memory-controlregister12 ADC12MCTL12 1Ch ADC memory-controlregister13 ADC12MCTL13 1Dh ADC memory-controlregister14 ADC12MCTL14 1Eh ADC memory-controlregister15 ADC12MCTL15 1Fh Conversionmemory 0 ADC12MEM0 20h Conversionmemory 1 ADC12MEM1 22h Conversionmemory 2 ADC12MEM2 24h Conversionmemory 3 ADC12MEM3 26h Conversionmemory 4 ADC12MEM4 28h Conversionmemory 5 ADC12MEM5 2Ah Conversionmemory 6 ADC12MEM6 2Ch Conversionmemory 7 ADC12MEM7 2Eh Conversionmemory 8 ADC12MEM8 30h Conversionmemory 9 ADC12MEM9 32h Conversionmemory 10 ADC12MEM10 34h Conversionmemory 11 ADC12MEM11 36h Conversionmemory 12 ADC12MEM12 38h Conversionmemory 13 ADC12MEM13 3Ah Conversionmemory 14 ADC12MEM14 3Ch Conversionmemory 15 ADC12MEM15 3Eh Copyright© 2009–2010,Texas InstrumentsIncorporated SubmitDocumentationFeedback 37

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailableCC430F613x CC430F612x CC430F513x SLAS554D –MAY 2009–REVISED JULY 2010 www.ti.com Table42.Comparator_B Registers(Base Address: 08C0h) REGISTER DESCRIPTION REGISTER OFFSET Comp_B controlregister0 CBCTL0 00h Comp_B controlregister1 CBCTL1 02h Comp_B controlregister2 CBCTL2 04h Comp_B controlregister3 CBCTL3 06h Comp_B interruptregister CBINT 0Ch Comp_B interruptvectorword CBIV 0Eh Table43.AES AcceleratorRegisters(Base Address: 09C0h) REGISTER DESCRIPTION REGISTER OFFSET AES acceleratorcontrolregister0 AESACTL0 00h Reserved 02h AES acceleratorstatusregister AESASTAT 04h AES acceleratorkey register AESAKEY 06h AES acceleratordatainregister AESADIN 008h AES acceleratordataoutregister AESADOUT 00Ah Table44.LCD_B Registers(Base Address: 0A00h) REGISTER DESCRIPTION REGISTER OFFSET LCD_B controlregister0 LCDBCTL0 000h LCD_B controlregister1 LCDBCTL1 002h LCD_B blinkingcontrolregister LCDBBLKCTL 004h LCD_B memory controlregister LCDBMEMCTL 006h LCD_B voltagecontrolregister LCDBVCTL 008h LCD_B portcontrolregister0 LCDBPCTL0 00Ah LCD_B portcontrolregister1 LCDBPCTL1 00Ch LCD_B chargepump controlregister LCDBCTL0 012h LCD_B interruptvectorword LCDBIV 01Eh LCD_B memory 1 LCDM1 020h LCD_B memory 2 LCDM2 021h ... LCD_B memory 14 LCDM14 02Dh LCD_B blinkingmemory 1 LCDBM1 040h LCD_B blinkingmemory 2 LCDBM2 041h ... LCD_B blinkingmemory 14 LCDBM14 04Dh

38 SubmitDocumentationFeedback Copyright© 2009–2010,Texas InstrumentsIncorporated

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailable CC430F613x CC430F612x CC430F513x www.ti.com SLAS554D –MAY 2009–REVISED JULY 2010 Table45.Radio InterfaceRegisters(Base Address: 0F00h) REGISTER DESCRIPTION REGISTER OFFSET Radiointerfacecontrolregister0 RF1AIFCTL0 00h Radiointerfacecontrolregister1 RF1AIFCTL1 02h Radiointerfaceerrorflagregister RF1AIFERR 06h Radiointerfaceerrorvectorword RF1AIFERRV 0Ch Radiointerfaceinterruptvectorword RF1AIFIV 0Eh Radioinstructionword register RF1AINSTRW 10h Radioinstructionword register,1-byteauto-read RF1AINSTR1W 12h Radioinstructionword register,2-byteauto-read RF1AINSTR2W 14h Radiodatainregister RF1ADINW 16h Radiostatusword register RF1ASTATW 20h Radiostatusword register,1-byteauto-read RF1ASTAT1W 22h Radiostatusword register,2-byteauto-read RF1AISTAT2W 24h Radiodataoutregister RF1ADOUTW 28h Radiodataoutregister,1-byteauto-read RF1ADOUT1W 2Ah Radiodataoutregister,2-byteauto-read RF1ADOUT2W 2Ch Radiocoresignalinputregister RF1AIN 30h Radiocoreinterruptflagregister RF1AIFG 32h Radiocoreinterruptedge selectregister RF1AIES 34h Radiocoreinterruptenableregister RF1AIE 36h Radiocoreinterruptvectorword RF1AIV 38h Copyright© 2009–2010,Texas InstrumentsIncorporated SubmitDocumentationFeedback 39

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailableCC430F613x CC430F612x CC430F513x SLAS554D –MAY 2009–REVISED JULY 2010 www.ti.com AbsoluteMaximum Ratings(1) overoperatingfree-airtemperaturerange(unlessotherwisenoted) VoltageappliedatDVCC and AVCC pinstoVSS –0.3V to4.1V –0.3V to(VCC + 0.3V),Voltageappliedtoany pin(excludingVCORE, RF_P, RF_N, and R_BIAS)(2) 4.1V Max VoltageappliedtoVCORE, RF_P, RF_N, and R_BIAS (2) –0.3V to2.0V InputRF levelatpinsRF_P and RF_N 10 dBm Diodecurrentatany deviceterminal ±2 mA Storagetemperaturerange(3),Tstg –55°C to105°C Maximum junctiontemperature,TJ 95°C (1) Stressesbeyond thoselistedunder"absolutemaximum ratings"may cause permanentdamage tothedevice.These arestressratings only,and functionaloperationofthedeviceattheseorany otherconditionsbeyond thoseindicatedunder"recommended operating conditions"isnotimplied.Exposuretoabsolute-maximum-ratedconditionsforextendedperiodsmay affectdevicereliability. (2) AllvoltagesreferencedtoVSS . (3) Highertemperaturemay be appliedduringboardsolderingaccordingtothecurrentJEDEC J-STD-020specificationwithpeak reflow temperaturesnothigherthanclassifiedon thedevicelabelon theshippingboxes orreels. Thermal Packaging CharacteristicsCC430F51xx Low-K board 48 QFN (RGZ) 98°C/W qJA Junctiontoambientthermalresistance,stillair High-Kboard 48 QFN (RGZ) 28°C/W Thermal Packaging CharacteristicsCC430F61xx Low-K board 64 QFN (RGC) 83°C/W qJA Junctiontoambientthermalresistance,stillair High-Kboard 64 QFN (RGC) 26°C/W Recommended OperatingConditions MIN NOM MAX UNIT SupplyvoltagerangeappliedatallDVCC and AVCC PMMCOREVx = 0 (default 1.8 3.6 Vpins(1)duringprogramexecutionand flashprogramming afterPOR)VCC withPMM defaultsettings.Radioisnotoperationalwith PMMCOREVx = 1 2.0 3.6 VPMMCOREVx = 0,1.(2) SupplyvoltagerangeappliedatallDVCC and AVCC PMMCOREVx = 2 2.2 3.6 V VCC pins(1)duringprogramexecution,flashprogrammingand PMMCOREVx = 3 2.4 3.6 VradiooperationwithPMM defaultsettings.(2) SupplyvoltagerangeappliedatallDVCC and AVCC pins(1)duringprogramexecution,flashprogrammingand PMMCOREVx = 2, VCC radiooperationwithPMMCOREVx = 2,high-sideSVS SVSHRVLx=SVSHRRRLx=1 2.0 3.6 V levellowered(SVSHRVLx=SVSHRRRLx=1) orhigh-side orSVSHE=0 SVS disabled(SVSHE=0).(3)(2) Supplyvoltageappliedattheexposed dieattachVSS andVSS 0 VAVSS pin TA Operatingfree-airtemperature –40 85 °C TJ Operatingjunctiontemperature –40 85 °C C VCORE Recommended capacitoratVCORE 470 nF C DVCC / CapacitorratioofcapacitoratDVCC tocapacitorat 10C VCORE VCORE PMMCOREVx = 0 0 8 MHz(defaultcondition) PMMCOREVx = 1 0 12 MHzfSYSTEM Processor(MCLK) frequency(4)(seeFigure2) PMMCOREVx = 2 0 16 MHz PMMCOREVx = 3 0 20 MHz (1) Itisrecommended topower AV CC and DV CC fromthesame source.A maximum differenceof0.3V between AV CC and DV CC can be toleratedduringpower up and operation. (2) Modules may have a differentsupplyvoltagerangespecification.See thespecificationoftherespectivemodule inthisdatasheet. (3) Loweringthehigh-sideSVS levelordisablingthehigh-sideSVS mightcause theLDO tooperateoutofregulationbutthecorevoltage willstillstaywithinit's limitsand isstillsupervisedby thelow-sideSVS ensuringreliableoperation. (4) Modules may have a differentmaximum inputclockspecification.See thespecificationoftherespectivemodule inthisdatasheet.

40 SubmitDocumentationFeedback Copyright© 2009–2010,Texas InstrumentsIncorporated

2.01.8 System Frequency - MHz Supply Voltage - V The numbers within the fields denote the supported PMMCOREVx settings. 2.2 2.4 3.6 1, 2, 31, 21 2, 3 ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailable CC430F613x CC430F612x CC430F513x www.ti.com SLAS554D –MAY 2009–REVISED JULY 2010 Recommended OperatingConditions(continued) MIN NOM MAX UNIT PINT Internalpower dissipation VCC x I(DVCC) W (VCC -VIOH)x IIOH +PIO I/Opower dissipationofI/Opinspowered by DVCC WVIOL x IIOL PMAX Maximum allowedpower dissipation,PMAX > PIO + PINT (TJ -TA)/qJA W Figure2. Maximum System Frequency Copyright© 2009–2010,Texas InstrumentsIncorporated SubmitDocumentationFeedback 41

IAM - Active Mode Supply Current - mA VCC = 3.0 V PM M VCOR E x=2 PM M VCOR E x=0 PM M VCOR E x=1 PM M VCOR E x=3 ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailableCC430F613x CC430F612x CC430F513x SLAS554D –MAY 2009–REVISED JULY 2010 www.ti.com ElectricalCharacteristics ActiveMode Supply CurrentIntoVCC ExcludingExternalCurrent overrecommended operatingfree-airtemperature(unlessotherwisenoted)(1)(2)(3) FREQUENCY (fDCO = fMCLK = fSMCLK ) EXECUTIONPARAMETER VCC PMMCOREVx 1 MHz 8 MHz 12 MHz 16 MHz 20 MHz UNITMEMORY TYP MAX TYP MAX TYP MAX TYP MAX TYP MAX 0 0.23 0.26 1.35 1.60 IAM, Flash(4) Flash 3.0V mA 0 0.18 0.20 0.95 1.10 IAM, RAM (5) RAM 3.0V mA (1) Allinputsaretiedto0 V ortoVCC .Outputsdo notsourceorsinkany current. (2) The currentsarecharacterizedwitha MicroCrystalMS1V-T1K crystalwitha loadcapacitanceof12.5pF.The internaland externalload capacitancearechosen tocloselymatch therequired12.5pF. (3) Characterizedwithprogramexecutingtypicaldataprocessing. fACLK = 32786 Hz,fDCO = fMCLK = fSMCLK atspecifiedfrequency. XTS = CPUOFF = SCG0 = SCG1 = OSCOFF= SMCLKOFF = 0. (4) Activemode supplycurrentwhen programexecutesinflashata nominalsupplyvoltageof3.0V. (5) Activemode supplycurrentwhen programexecutesinRAM ata nominalsupplyvoltageof3.0V. TypicalCharacteristics-ActiveMode Supply Currents ActiveMode Supply Current vs MCLK Frequency Figure3.

42 SubmitDocumentationFeedback Copyright© 2009–2010,Texas InstrumentsIncorporated

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailable CC430F613x CC430F612x CC430F513x www.ti.com SLAS554D –MAY 2009–REVISED JULY 2010 Low-Power Mode Supply Currents(IntoVCC )ExcludingExternalCurrent overrecommended rangesofsupplyvoltageand operatingfree-airtemperature(unlessotherwisenoted)(1)(2) Temperature (TA ) PARAMETER VCC PMMCOREVx -40°C 25°C 60°C 85°C UNIT TYP MAX TYP MAX TYP MAX TYP MAX 2.2V 0 80 100 80 100 80 100 80 100 ILPM0,1MHz Low-power mode 0(3)(4) µA 3.0V 3 90 110 90 110 90 110 90 110 ILPM2 Low-power mode 2(5)(4) µA 2 2.0 2.2 3.4 5.1 2 1.1 1.3 2.5 4.2 1 0.9 1.1 2.2 3.8 ILPM4 Low-power mode 4(8)(4) 3.0V µA 2 1.0 1.2 2.4 4.1 (1) Allinputsaretiedto0 V ortoVCC .Outputsdo notsourceorsinkany current. (2) The currentsarecharacterizedwitha MicroCrystalMS1V-T1K crystalwitha loadcapacitanceof12.5pF.The internaland externalload capacitancearechosen tocloselymatch therequired12.5pF. (3) Currentforwatchdogtimerclockedby SMCLK included.ACLK = lowfrequencycrystaloperation(XTS = 0,XT1DRIVEx = 0). CPUOFF = 1,SCG0 = 0,SCG1 = 0,OSCOFF = 0 (LPM0);fACLK = 32768 Hz,fMCLK = 0 MHz, fSMCLK = fDCO = 1 MHz (4) Currentforbrownout,highsidesupervisor(SVSH )normalmode included.Low sidesupervisorand monitorsdisabled(SVSL,SVM L). Highsidemonitordisabled(SVM H ).RAM retentionenabled. (5) Currentforwatchdogtimerand RTC clockedby ACLK included.ACLK = lowfrequencycrystaloperation(XTS = 0,XT1DRIVEx = 0). CPUOFF = 1,SCG0 = 0,SCG1 = 1,OSCOFF = 0 (LPM2);fACLK = 32768 Hz,fMCLK = 0 MHz, fSMCLK = fDCO = 0 MHz; DCO setting= 1 MHz operation,DCO biasgeneratorenabled. (6) Currentforwatchdogtimerand RTC clockedby ACLK included.ACLK = lowfrequencycrystaloperation(XTS = 0,XT1DRIVEx = 0). CPUOFF = 1,SCG0 = 1,SCG1 = 1,OSCOFF = 0 (LPM3);fACLK = 32768 Hz,fMCLK = fSMCLK = fDCO = 0 MHz (7) Currentforwatchdogtimerand RTC clockedby ACLK included.ACLK = VLO. CPUOFF = 1,SCG0 = 1,SCG1 = 1,OSCOFF = 0 (LPM3);fACLK = fVLO ,fMCLK = fSMCLK = fDCO = 0 MHz (8) CPUOFF = 1,SCG0 = 1,SCG1 = 1,OSCOFF = 1 (LPM4);fDCO = fACLK = fMCLK = fSMCLK = 0 MHz Copyright© 2009–2010,Texas InstrumentsIncorporated SubmitDocumentationFeedback 43

-40 -20 0 20 40 60 80 TA - Fre e -Air Te m pe rature - °C ILPM3,XT1LF - LPM3 Supply Current - uA VCC = 3.0 V PM M COR E Vx = 3 PM M COR E Vx = 0 -40 -20 0 20 40 60 80 TA - Fre e -Air Te m pe rature - °C ILPM4 - LPM4 Supply Current - uA VDD = 3.0 V PM M COR E Vx = 3 PM M COR E Vx = 0 ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailableCC430F613x CC430F612x CC430F513x SLAS554D –MAY 2009–REVISED JULY 2010 www.ti.com TypicalCharacteristics-Low-Power Mode Supply Currents LPM3 Supply Current LPM4 Supply Current vs vs Temperature Temperature Figure4. Figure5.

44 SubmitDocumentationFeedback Copyright© 2009–2010,Texas InstrumentsIncorporated

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailable CC430F613x CC430F612x CC430F513x www.ti.com SLAS554D –MAY 2009–REVISED JULY 2010 Low-Power Mode withLCD Supply Currents(IntoVCC )ExcludingExternalCurrent overrecommended rangesofsupplyvoltageand operatingfree-airtemperature(unlessotherwisenoted)(1)(2) Temperature (TA ) PARAMETER VCC PMMCOREVx -40°C 25°C 60°C 85°C UNIT TYP MAX TYP MAX TYP MAX TYP MAX 3 2.4 2.6 4.0 5.8 ILPM3 (LPM3) current,LCD 1 3.2 3.4 4.5 6.2 LCD, 4-mux mode, internal 3.0V µA disabled(3)(5) 0 4.0 2.2V 1 4.1 Low-power mode 3 2 4.2(LPM3) current,LCDILPM3 4-mux mode, internal 0 4.2 µALCD,CP biasing,chargepump 1 4.3enabled(3)(6) 3.0V 2 4.5 3 4.5 (1) Allinputsaretiedto0 V ortoVCC .Outputsdo notsourceorsinkany current. (2) The currentsarecharacterizedwitha MicroCrystalMS1V-T1K crystalwitha loadcapacitanceof12.5pF.The internaland externalload capacitancearechosen tocloselymatch therequired12.5pF. (3) Currentforwatchdogtimerand RTC clockedby ACLK included.ACLK = lowfrequencycrystaloperation(XTS = 0,XT1DRIVEx = 0). CPUOFF = 1,SCG0 = 1,SCG1 = 1,OSCOFF = 0 (LPM3);fACLK = 32768 Hz,fMCLK = fSMCLK = fDCO = 0 MHz Currentforbrownout,highsidesupervisor(SVSH )normalmode included.Low sidesupervisorand monitorsdisabled(SVSL,SVM L). Highsidemonitordisabled(SVM H ).RAM retentionenabled. (4) LCDMx = 11 (4-muxmode),LCDREXT=1, LCDEXTBIAS=1 (externalbiasing),LCD2B=0 (1/3bias),LCDCPEN=0 (chargepump disabled),LCDSSEL=0, LCDPREx=101, LCDDIVx=00011 (fLCD = 32768 Hz/32/4= 256 Hz) Currentthroughexternalresistorsnotincluded(voltagelevelsaresuppliedby testequipment). (5) LCDMx = 11 (4-muxmode),LCDREXT=0, LCDEXTBIAS=0 (internalbiasing),LCD2B=0 (1/3bias),LCDCPEN=0 (chargepump disabled),LCDSSEL=0, LCDPREx=101, LCDDIVx=00011 (fLCD = 32768 Hz/32/4= 256 Hz) (6) LCDMx = 11 (4-muxmode),LCDREXT=0, LCDEXTBIAS=0 (internalbiasing),LCD2B=0 (1/3bias),LCDCPEN=1 (chargepump enabled),VLCDx=1000 (VLCD = 3 V typ.),LCDSSEL=0, LCDPREx=101, LCDDIVx=00011 (fLCD = 32768 Hz/32/4= 256 Hz) Copyright© 2009–2010,Texas InstrumentsIncorporated SubmitDocumentationFeedback 45

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailableCC430F613x CC430F612x CC430F513x SLAS554D –MAY 2009–REVISED JULY 2010 www.ti.com DigitalInputs overrecommended rangesofsupplyvoltageand operatingfree-airtemperature(unlessotherwisenoted) PARAMETER TEST CONDITIONS VCC MIN TYP MAX UNIT 1.8V 0.80 1.40 VIT+ Positive-goinginputthresholdvoltage V 3 V 1.50 2.10 1.8V 0.45 1.00 VIT– Negative-goinginputthresholdvoltage V 3 V 0.75 1.65 1.8V 0.3 0.8 Vhys Inputvoltagehysteresis(VIT+ – VIT–) V 3 V 0.4 1.0 Forpullup:VIN = VSSR Pull Pullup/pulldownresistor 20 35 50 kΩForpulldown:VIN = VCC C I Inputcapacitance VIN = VSS orVCC 5 pF Ilkg(Px.x) High-impedanceleakagecurrent (1)(2) 1.8V/3V ±50 nA Portswithinterruptcapability Externalinterrupttiming(Externaltriggerpulse (seeblockdiagramandt(int) 1.8V/3V 20 nswidthtosetinterruptflag)(3) terminalfunction descriptions). (1) The leakagecurrentismeasured withVSS orVCC appliedtothecorrespondingpin(s),unlessotherwisenoted. (2) The leakageofthedigitalportpinsismeasured individually.The portpinisselectedforinputand thepullup/pulldownresistoris disabled. (3) An externalsignalsetstheinterruptflageverytimetheminimum interruptpulsewidtht(int)ismet.Itmay be setby triggersignalsshorter thant(int).

46 SubmitDocumentationFeedback Copyright© 2009–2010,Texas InstrumentsIncorporated

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailable CC430F613x CC430F612x CC430F513x www.ti.com SLAS554D –MAY 2009–REVISED JULY 2010 DigitalOutputs overrecommended rangesofsupplyvoltageand operatingfree-airtemperature(unlessotherwisenoted) PARAMETER TEST CONDITIONS VCC MIN MAX UNIT I(OHmax) = –1 mA, PxDS.y = 0(2) VCC – 0.25 VCC 1.8V I(OHmax) = –3 mA, PxDS.y = 0(3) VCC – 0.60 VCCHigh-leveloutputvoltage,VOH VReduced DriveStrength(1) I(OHmax) = –2 mA, PxDS.y = 0(2) VCC – 0.25 VCC 3.0V I(OHmax) = –6 mA, PxDS.y = 0(3) VCC – 0.60 VCC I(OLmax) = 1 mA, PxDS.y = 0(2) VSS VSS + 0.25 1.8V I(OLmax) = 3 mA, PxDS.y = 0(3) VSS VSS + 0.60Low-leveloutputvoltage,VOL VReduced DriveStrength(1) I(OLmax) = 2 mA, PxDS.y = 0(2) VSS VSS + 0.25 3.0V I(OLmax) = 6 mA, PxDS.y = 0(3) VSS VSS + 0.60 I(OHmax) = –3 mA, PxDS.y = 1(2) VCC – 0.25 VCC 1.8V I(OHmax) = –10 mA, PxDS.y = 1(3) VCC – 0.60 VCCHigh-leveloutputvoltage,VOH VFullDriveStrength I(OHmax) = –5 mA, PxDS.y = 1(2) VCC – 0.25 VCC 3 V I(OHmax) = –15 mA, PxDS.y = 1(3) VCC – 0.60 VCC I(OLmax) = 3 mA, PxDS.y = 1(2) VSS VSS + 0.25 1.8V I(OLmax) = 10 mA, PxDS.y = 1(3) VSS VSS + 0.60Low-leveloutputvoltage,VOL VFullDriveStrength I(OLmax) = 5 mA, PxDS.y = 1(2) VSS VSS + 0.25 3 V I(OLmax) = 15 mA, PxDS.y = 1(3) VSS VSS + 0.60 VCC = 1.8V 16PMMCOREVx = 0PortoutputfrequencyfPx.y C L = 20 pF,R L (4)(5) MHz(withload) VCC = 3 V 25PMMCOREVx = 2 VCC = 1.8V 16PMMCOREVx = 0 fPort_CLK Clockoutputfrequency C L = 20 pF (5) MHz VCC = 3 V 25PMMCOREVx = 2 (1) Selectingreduceddrivestrengthmay reduceEMI. (2) The maximum totalcurrent,I(OHmax) and I(OLmax),foralloutputscombined shouldnotexceed ±48 mA toholdthemaximum voltagedrop specified. (3) The maximum totalcurrent,I(OHmax) and I(OLmax),foralloutputscombined shouldnotexceed ±100 mA toholdthemaximum voltage dropspecified. (4) A resistivedividerwith2 × R1 between VCC and VSS isused as load.The outputisconnectedtothecentertapofthedivider.Forfull drivestrength,R1 = 550 Ω.Forreduceddrivestrength,R1 = 1.6kΩ.C L = 20 pF isconnectedtotheoutputtoVSS . (5) The outputvoltagereachesatleast10% and 90% VCC atthespecifiedtogglefrequency. Copyright© 2009–2010,Texas InstrumentsIncorporated SubmitDocumentationFeedback 47

0 0.5 1 1.5 2 2.5 3 3.5 VOL - Low -Le ve l Output Voltage - V IOL - Typical Low-Level Output Current - mA VCC = 3.0 V P4.3 TA = 25/c176C TA = 85°C 0 0.5 1 1.5 2 VOL - Low -Le ve l Output Voltage - V IOL - Typical Low-Level Output Current - mA VDD = 5.5 V VCC = 1.8 V P4.3 TA = 25°C TA = 85°C -25 -20 -15 -10 0 0.5 1 1.5 2 2.5 3 3.5 VOH - H igh-Le ve l Output Voltage - V IOH - Typical High-Level Output Current - mA VCC = 3.0 V VCC = 3.0 V P4.3 TA = 25°C TA = 85°C 0 0.5 1 1.5 2 VOH - H igh-Le ve l Output Voltage - V IOH - Typical High-Level Output Current - mA VDD = 5.5 VVDD = 5.5 V VCC = 1.8 V P4.3 TA = 25°C TA = 85°C ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailableCC430F613x CC430F612x CC430F513x SLAS554D –MAY 2009–REVISED JULY 2010 www.ti.com TypicalCharacteristics-Outputs,Reduced DriveStrength(PxDS.y = 0) TYPICAL LOW-LEVEL OUTPUT CURRENT TYPICAL LOW-LEVEL OUTPUT CURRENT vs vs LOW-LEVEL OUTPUT VOLTAGE LOW-LEVEL OUTPUT VOLTAGE Figure6. Figure7. TYPICAL HIGH-LEVEL OUTPUT CURRENT TYPICAL HIGH-LEVEL OUTPUT CURRENT vs vs HIGH-LEVEL OUTPUT VOLTAGE HIGH-LEVEL OUTPUT VOLTAGE Figure8. Figure9.

48 SubmitDocumentationFeedback Copyright© 2009–2010,Texas InstrumentsIncorporated

0 0.5 1 1.5 2 2.5 3 3.5 VOL - Low -Le ve l Output Voltage - V IOL - Typical Low-Level Output Current - mA VCC = 3.0 V P4.3 TA = 25°C TA = 85°C 0 0.5 1 1.5 2 VOL - Low -Le ve l Output Voltage - V IOL - Typical Low-Level Output Current - mA VDD = 5.5 V VCC = 1.8 V P4.3 TA = 25°C TA = 85°C -60 -50 -40 -30 -20 -10 0 0.5 1 1.5 2 2.5 3 3.5 VOH - H igh-Le ve l Output Voltage - V IOH - Typical High-Level Output Current - mA VCC = 3.0 V VCC = 3.0 V P4.3 TA = 25°C TA = 85°C -25 -20 -15 -10 0 0.5 1 1.5 2 VOH - H igh-Le ve l Output Voltage - V IOH - Typical High-Level Output Current - mA VDD = 5.5 VVDD = 5.5 V VCC = 1.8 V P4.3 TA = 25°C TA = 85°C ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailable CC430F613x CC430F612x CC430F513x www.ti.com SLAS554D –MAY 2009–REVISED JULY 2010 TypicalCharacteristics-Outputs,FullDriveStrength(PxDS.y = 1) TYPICAL LOW-LEVEL OUTPUT CURRENT TYPICAL LOW-LEVEL OUTPUT CURRENT vs vs LOW-LEVEL OUTPUT VOLTAGE LOW-LEVEL OUTPUT VOLTAGE Figure10. Figure11. TYPICAL HIGH-LEVEL OUTPUT CURRENT TYPICAL HIGH-LEVEL OUTPUT CURRENT vs vs HIGH-LEVEL OUTPUT VOLTAGE HIGH-LEVEL OUTPUT VOLTAGE Figure12. Figure13. Copyright© 2009–2010,Texas InstrumentsIncorporated SubmitDocumentationFeedback 49

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailableCC430F613x CC430F612x CC430F513x SLAS554D –MAY 2009–REVISED JULY 2010 www.ti.com CrystalOscillator,XT1, Low-Frequency Mode (1) overrecommended rangesofsupplyvoltageand operatingfree-airtemperature(unlessotherwisenoted) PARAMETER TEST CONDITIONS VCC MIN TYP MAX UNIT fOSC = 32768 Hz,XTS = 0, XT1BYPASS = 0,XT1DRIVEx = 1, 0.075 TA = 25°C DifferentialXT1 oscillatorcrystal fOSC = 32768 Hz,XTS = 0, ΔIDVCC.LF currentconsumptionfromlowest XT1BYPASS = 0,XT1DRIVEx = 2, 3.0V 0.170 µA drivesetting,LF mode TA = 25°C fOSC = 32768 Hz,XTS = 0, XT1BYPASS = 0,XT1DRIVEx = 3, 0.290 TA = 25°C XT1 oscillatorcrystalfrequency,fXT1,LF0 XTS = 0,XT1BYPASS = 0 32768 HzLF mode XT1 oscillatorlogic-level fXT1,LF,SW square-waveinputfrequency, XTS = 0,XT1BYPASS = 1(2)(3) 10 32.768 50 kHz LF mode XTS = 0, XT1BYPASS = 0,XT1DRIVEx = 0, 210 fXT1,LF = 32768 Hz,C L,eff= 6 pFOscillationallowanceforOA LF kΩLF crystals(4) XTS = 0, XT1BYPASS = 0,XT1DRIVEx = 1, 300 fXT1,LF = 32768 Hz,C L,eff= 12 pF XTS = 0,XCAPx = 0(6) 2 XTS = 0,XCAPx = 1 5.5IntegratedeffectiveloadC L,eff pFcapacitance,LF mode (5) XTS = 0,XCAPx = 2 8.5 XTS = 0,XCAPx = 3 12.0 XTS = 0,Measured atACLK,Dutycycle LF mode 30 70 %fXT1,LF = 32768 Hz Oscillatorfaultfrequency,fFault,LF XTS = 0(8) 10 10000 HzLF mode (7) fOSC = 32768 Hz,XTS = 0, XT1BYPASS = 0,XT1DRIVEx = 0, 1000TA = 25°C, C L,eff= 6 pF tSTART,LF Startuptime,LF mode 3.0V ms fOSC = 32768 Hz,XTS = 0, XT1BYPASS = 0,XT1DRIVEx = 3, 500TA = 25°C, C L,eff= 12 pF (1) To improveEMI on theXT1 oscillator,thefollowingguidelinesshouldbe observed. (a) Keep thetracebetween thedeviceand thecrystalas shortas possible. (b) Designa good groundplanearoundtheoscillatorpins. (c)PreventcrosstalkfromotherclockordatalinesintooscillatorpinsXIN and XOUT. (d) AvoidrunningPCB tracesunderneathoradjacenttotheXIN and XOUT pins. (e) Use assemblymaterialsand praxistoavoidany parasiticloadon theoscillatorXIN and XOUT pins. (f)Ifconformalcoatingisused,ensurethatitdoes notinducecapacitive/resistiveleakagebetween theoscillatorpins. (2) When XT1BYPASS isset,XT1 circuitsareautomaticallypowered down. Inputsignalisa digitalsquarewave withparametricsdefinedin theSchmitt-triggerInputssectionofthisdatasheet. (3) Maximum frequencyofoperationoftheentiredevicecannotbe exceeded. (4) Oscillationallowanceisbased on a safetyfactorof5 forrecommended crystals.The oscillationallowanceisa functionofthe XT1DRIVEx settingsand theeffectiveload.Ingeneral,comparableoscillatorallowancecan be achievedbased on thefollowing guidelines,butshouldbe evaluatedbased on theactualcrystalselectedfortheapplication: (a) ForXT1DRIVEx = 0,C L,eff≤ 6 pF (b) ForXT1DRIVEx = 1,6 pF ≤ C L,eff≤ 9 pF (c)ForXT1DRIVEx = 2,6 pF ≤ C L,eff≤ 10 pF (d) ForXT1DRIVEx = 3,C L,eff≥ 6 pF (5) Includesparasiticbond and package capacitance(approximately2 pF perpin). SincethePCB adds additionalcapacitance,itisrecommended toverifythecorrectloadby measuringtheACLK frequency.Fora correctsetup,theeffectiveloadcapacitanceshouldalwaysmatch thespecificationoftheused crystal. (6) Requiresexternalcapacitorsatbothterminals.Valuesarespecifiedby crystalmanufacturers. (7) FrequenciesbelowtheMIN specificationsetthefaultflag.Frequenciesabove theMAX specificationdo notsetthefaultflag. Frequenciesinbetween mightsettheflag. (8) Measured withlogic-levelinputfrequencybutalsoappliestooperationwithcrystals.

50 SubmitDocumentationFeedback Copyright© 2009–2010,Texas InstrumentsIncorporated

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailable CC430F613x CC430F612x CC430F513x www.ti.com SLAS554D –MAY 2009–REVISED JULY 2010 InternalVery-Low-Power Low-Frequency Oscillator(VLO) overrecommended rangesofsupplyvoltageand operatingfree-airtemperature(unlessotherwisenoted) PARAMETER TEST CONDITIONS VCC MIN TYP MAX UNIT fVLO VLO frequency Measured atACLK 1.8V to3.6V 6 9.4 14 kHz dfVLO /dT VLO frequencytemperaturedrift Measured atACLK (1) 1.8V to3.6V 0.5 %/°C dfVLO /dVCC VLO frequencysupplyvoltagedrift Measured atACLK (2) 1.8V to3.6V 4 %/V Dutycycle Measured atACLK 1.8V to3.6V 40 50 60 % (1) Calculatedusingthebox method:(MAX(-40to85°C) – MIN(-40to85°C))/MIN(-40to85°C) /(85°C – (–40°C)) InternalReference,Low-Frequency Oscillator(REFO) overrecommended rangesofsupplyvoltageand operatingfree-airtemperature(unlessotherwisenoted) PARAMETER TEST CONDITIONS VCC MIN TYP MAX UNIT IREFO REFO oscillatorcurrentconsumption TA = 25°C 1.8V to3.6V 3 µA fREFO REFO frequencycalibrated Measured atACLK 1.8V to3.6V 32768 Hz Fulltemperaturerange 1.8V to3.6V ±3.5 % REFO absolutetolerancecalibrated TA = 25°C 3 V ±1.5 % dfREFO /dT REFO frequencytemperaturedrift Measured atACLK (1) 1.8V to3.6V 0.01 %/°C dfREFO /dVCC REFO frequencysupplyvoltagedriftMeasured atACLK (2) 1.8V to3.6V 1.0 %/V Dutycycle Measured atACLK 1.8V to3.6V 40 50 60 % tSTART REFO startuptime 40%/60% dutycycle 1.8V to3.6V 25 µs (1) Calculatedusingthebox method:(MAX(-40to85°C) – MIN(-40to85°C))/MIN(-40to85°C) /(85°C – (–40°C)) Copyright© 2009–2010,Texas InstrumentsIncorporated SubmitDocumentationFeedback 51

Typical DCO Frequency, V = 3.0 V, T = 25°CCC A DCORSEL 100 0.1 f – MHzDCO DCOx = 31 DCOx = 0 ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailableCC430F613x CC430F612x CC430F513x SLAS554D –MAY 2009–REVISED JULY 2010 www.ti.com DCO Frequency overrecommended rangesofsupplyvoltageand operatingfree-airtemperature(unlessotherwisenoted) PARAMETER TEST CONDITIONS MIN TYP MAX UNIT fDCO(0,0) DCO frequency(0,0) DCORSELx = 0,DCOx = 0,MODx = 0 0.07 0.20 MHz fDCO(0,31) DCO frequency(0,31) DCORSELx = 0,DCOx = 31,MODx = 0 0.70 1.70 MHz fDCO(1,0) DCO frequency(1,0) DCORSELx = 1,DCOx = 0,MODx = 0 0.15 0.36 MHz fDCO(1,31) DCO frequency(1,31) DCORSELx = 1,DCOx = 31,MODx = 0 1.47 3.45 MHz fDCO(2,0) DCO frequency(2,0) DCORSELx = 2,DCOx = 0,MODx = 0 0.32 0.75 MHz fDCO(2,31) DCO frequency(2,31) DCORSELx = 2,DCOx = 31,MODx = 0 3.17 7.38 MHz fDCO(3,0) DCO frequency(3,0) DCORSELx = 3,DCOx = 0,MODx = 0 0.64 1.51 MHz fDCO(3,31) DCO frequency(3,31) DCORSELx = 3,DCOx = 31,MODx = 0 6.07 14.0 MHz fDCO(4,0) DCO frequency(4,0) DCORSELx = 4,DCOx = 0,MODx = 0 1.3 3.2 MHz fDCO(4,31) DCO frequency(4,31) DCORSELx = 4,DCOx = 31,MODx = 0 12.3 28.2 MHz fDCO(5,0) DCO frequency(5,0) DCORSELx = 5,DCOx = 0,MODx = 0 2.5 6.0 MHz fDCO(5,31) DCO frequency(5,31) DCORSELx = 5,DCOx = 31,MODx = 0 23.7 54.1 MHz fDCO(6,0) DCO frequency(6,0) DCORSELx = 6,DCOx = 0,MODx = 0 4.6 10.7 MHz fDCO(6,31) DCO frequency(6,31) DCORSELx = 6,DCOx = 31,MODx = 0 39.0 88.0 MHz fDCO(7,0) DCO frequency(7,0) DCORSELx = 7,DCOx = 0,MODx = 0 8.5 19.6 MHz fDCO(7,31) DCO frequency(7,31) DCORSELx = 7,DCOx = 31,MODx = 0 60 135 MHz Frequencystepbetween rangeSDCORSEL SRSEL = fDCO(DCORSEL+1,DCO) /fDCO(DCORSEL,DCO) 1.2 2.3 ratioDCORSEL and DCORSEL + 1 Frequencystepbetween tapSDCO SDCO = fDCO(DCORSEL,DCO+1) /fDCO(DCORSEL,DCO) 1.02 1.12 ratioDCO and DCO + 1 Dutycycle Measured atSMCLK 40 50 60 % dfDCO /dT DCO frequencytemperaturedriftfDCO = 1 MHz 0.1 %/°C dfDCO /dVCC DCO frequencyvoltagedrift fDCO = 1 MHz 1.9 %/V Figure14. TypicalDCO frequency

52 SubmitDocumentationFeedback Copyright© 2009–2010,Texas InstrumentsIncorporated

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailable CC430F613x CC430F612x CC430F513x www.ti.com SLAS554D –MAY 2009–REVISED JULY 2010 PMM, Brown-Out Reset (BOR) overrecommended rangesofsupplyvoltageand operatingfree-airtemperature(unlessotherwisenoted) PARAMETER TEST CONDITIONS MIN TYP MAX UNIT BOR H on voltage,V(DV CC _BOR_IT –) |dDV CC /dt|< 3 V/s 1.45 VDV CC fallinglevel BOR H offvoltage,V(DV CC _BOR_IT+) |dDV CC /dt|< 3 V/s 0.80 1.30 1.50 VDV CC risinglevel V(DV CC _BOR_hys) BOR H hysteresis 60 250 mV Pulselengthrequiredat tRESET RST/NMI pintoaccepta 2 µs reset PMM, Core Voltage overrecommended rangesofsupplyvoltageand operatingfree-airtemperature(unlessotherwisenoted) PARAMETER TEST CONDITIONS MIN TYP MAX UNIT Core voltage,activeVCORE3 (AM) 2.4V ≤ DV CC ≤ 3.6V 1.90 Vmode, PMMCOREV = 3 Core voltage,activeVCORE2 (AM) 2.2V ≤ DV CC ≤ 3.6V 1.80 Vmode, PMMCOREV = 2 Core voltage,activeVCORE1 (AM) 2.0V ≤ DV CC ≤ 3.6V 1.60 Vmode, PMMCOREV = 1 Core voltage,activeVCORE0 (AM) 1.8V ≤ DV CC ≤ 3.6V 1.40 Vmode, PMMCOREV = 0 Core voltage,low-currentVCORE3 (LPM) 2.4V ≤ DV CC ≤ 3.6V 1.94 Vmode, PMMCOREV = 3 Core voltage,low-currentVCORE2 (LPM) 2.2V ≤ DV CC ≤ 3.6V 1.84 Vmode, PMMCOREV = 2 Core voltage,low-currentVCORE1 (LPM) 2.0V ≤ DV CC ≤ 3.6V 1.64 Vmode, PMMCOREV = 1 Core voltage,low-currentVCORE0 (LPM) 1.8V ≤ DV CC ≤ 3.6V 1.44 Vmode, PMMCOREV = 0 Copyright© 2009–2010,Texas InstrumentsIncorporated SubmitDocumentationFeedback 53

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailableCC430F613x CC430F612x CC430F513x SLAS554D –MAY 2009–REVISED JULY 2010 www.ti.com PMM, SVS High Side overrecommended rangesofsupplyvoltageand operatingfree-airtemperature(unlessotherwisenoted) PARAMETER TEST CONDITIONS MIN TYP MAX UNIT SVSHE = 0,DV CC = 3.6V 0 nA I(SVSH) SVS currentconsumption SVSHE = 1,DV CC = 3.6V,SVSHFP = 0 200 nA SVSHE = 1,DV CC = 3.6V,SVSHFP = 1 1.5 µA SVSHE = 1,SVSHRVL = 0 1.53 1.60 1.67 SVSHE = 1,SVSHRVL = 1 1.73 1.80 1.87 V(SVSH_IT–) SVS H on voltagelevel(1) V SVSHE = 1,SVSHRVL = 2 1.93 2.00 2.07 SVSHE = 1,SVSHRVL = 3 2.03 2.10 2.17 SVSHE = 1,SVSMHRRL = 0 1.60 1.70 1.80 SVSHE = 1,SVSMHRRL = 1 1.80 1.90 2.00 SVSHE = 1,SVSMHRRL = 2 2.00 2.10 2.20 SVSHE = 1,SVSMHRRL = 3 2.10 2.20 2.30 V(SVSH_IT+) SVS H offvoltagelevel(1) V SVSHE = 1,SVSMHRRL = 4 2.25 2.35 2.50 SVSHE = 1,SVSMHRRL = 5 2.52 2.65 2.78 SVSHE = 1,SVSMHRRL = 6 2.85 3.00 3.15 SVSHE = 1,SVSMHRRL = 7 2.85 3.00 3.15 SVSHE = 1,dVDVCC /dt= 10 mV/µs, 2.5SVSHFP = 1 tpd(SVSH) SVS H propagationdelay µs SVSHE = 1,dVDVCC /dt= 1 mV/µs, 20SVSHFP = 0 SVSHE = 0 → 1,dVDVCC /dt= 10 mV/µs, 12.5SVSHFP = 1 t(SVSH) SVS H on/offdelaytime µs SVSHE = 0 → 1,dVDVCC /dt= 1 mV/µs, 100SVSHFP = 0 dVDVCC /dt DV CC risetime 0 1000 V/s (1) The SVS H settingsavailabledepend on theVCORE (PMMCOREVx) setting.See thePower Management Module and SupplyVoltage SupervisorchapterintheCC430 FamilyUser's Guide (SLAU259 )on recommended settingsand usage.

54 SubmitDocumentationFeedback Copyright© 2009–2010,Texas InstrumentsIncorporated

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailable CC430F613x CC430F612x CC430F513x www.ti.com SLAS554D –MAY 2009–REVISED JULY 2010 PMM, SVM High Side overrecommended rangesofsupplyvoltageand operatingfree-airtemperature(unlessotherwisenoted) PARAMETER TEST CONDITIONS MIN TYP MAX UNIT SVMHE = 0,DV CC = 3.6V 0 nA I(SVMH) SVM H currentconsumption SVMHE= 1,DV CC = 3.6V,SVMHFP = 0 200 nA SVMHE = 1,DV CC = 3.6V,SVMHFP = 1 1.5 µA SVMHE = 1,SVSMHRRL = 0 1.60 1.70 1.80 SVMHE = 1,SVSMHRRL = 1 1.80 1.90 2.00 SVMHE = 1,SVSMHRRL = 2 2.00 2.10 2.20 SVMHE = 1,SVSMHRRL = 3 2.10 2.20 2.30 V(SVMH) SVM H on/offvoltagelevel(1) SVMHE = 1,SVSMHRRL = 4 2.25 2.35 2.50 V SVMHE = 1,SVSMHRRL = 5 2.52 2.65 2.78 SVMHE = 1,SVSMHRRL = 6 2.85 3.00 3.15 SVMHE = 1,SVSMHRRL = 7 2.85 3.00 3.15 SVMHE = 1,SVMHOVPE = 1 3.75 SVMHE = 1,dVDVCC /dt= 10 mV/µs, 2.5SVMHFP = 1 tpd(SVMH) SVM H propagationdelay µs SVMHE = 1,dVDVCC /dt= 1 mV/µs, 20SVMHFP = 0 SVMHE = 0 → 1,dVDVCC /dt= 10 mV/µs, 12.5SVMHFP = 1 t(SVMH) SVM H on/offdelaytime µs SVMHE = 0 → 1,dVDVCC /dt= 1 mV/µs, 100SVMHFP = 0 (1) The SVM H settingsavailabledepend on theVCORE (PMMCOREVx) setting.See thePower Management Module and SupplyVoltage SupervisorchapterintheCC430 FamilyUser's Guide (SLAU259 )on recommended settingsand usage. Copyright© 2009–2010,Texas InstrumentsIncorporated SubmitDocumentationFeedback 55

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailableCC430F613x CC430F612x CC430F513x SLAS554D –MAY 2009–REVISED JULY 2010 www.ti.com PMM, SVS Low Side overrecommended rangesofsupplyvoltageand operatingfree-airtemperature(unlessotherwisenoted) PARAMETER TEST CONDITIONS MIN TYP MAX UNIT SVSLE = 0,PMMCOREV = 2 0 nA I(SVSL) SVS L currentconsumption SVSLE = 1,PMMCOREV = 2,SVSLFP = 0 200 nA SVSLE = 1,PMMCOREV = 2,SVSLFP = 1 1.5 µA SVSLE = 1,dVCORE /dt= 10 mV/µs, 2.5SVSLFP = 1 tpd(SVSL) SVS L propagationdelay µs SVSLE = 1,dVCORE /dt= 1 mV/µs, 20SVSLFP = 0 SVSLE = 0 → 1,dVCORE /dt= 10 mV/µs, 12.5SVSLFP = 1 t(SVSL) SVS L on/offdelaytime µs SVSLE = 0 → 1,dVCORE /dt= 1 mV/µs, 100SVSLFP = 0 PMM, SVM Low Side overrecommended rangesofsupplyvoltageand operatingfree-airtemperature(unlessotherwisenoted) PARAMETER TEST CONDITIONS MIN TYP MAX UNIT SVMLE = 0,PMMCOREV = 2 0 nA I(SVML) SVM L currentconsumption SVMLE= 1,PMMCOREV = 2,SVMLFP = 0 200 nA SVMLE= 1,PMMCOREV = 2,SVMLFP = 1 1.5 µA SVMLE = 1,dVCORE /dt= 10 mV/µs, 2.5SVMLFP = 1 tpd(SVML) SVM L propagationdelay µs SVMLE = 1,dVCORE /dt= 1 mV/µs, 20SVMLFP = 0 SVMLE = 0 → 1,dVCORE /dt= 10 mV/µs, 12.5SVMLFP = 1 t(SVML) SVM L on/offdelaytime µs SVMLE = 0 → 1,dVCORE /dt= 1 mV/µs, 100SVMLFP = 0 Wake-up from Low Power Modes and Reset overrecommended rangesofsupplyvoltageand operatingfree-airtemperature(unlessotherwisenoted) PARAMETER TEST CONDITIONS MIN TYP MAX UNIT Wake-up timefrom PMMCOREV = SVSMLRRL = n,where n = 0, fMCLK ≥ 4.0MHz 5tWAKE-UP- LPM2, LPM3, orLPM4 1,2,or3 µs FAST fMCLK < 4.0MHz 6toactivemode (1) SVSLFP = 1 Wake-up timefromtWAKE-UP- PMMCOREV = SVSMLRRL = n,where n = 0,1,2,or3LPM2, LPM3 orLPM4 to 150 165 µs SLOW SVSLFP = 0activemode (2) Wake-up timefromRSTtWAKE-UP- orBOR eventtoactive 2 3 ms RESET mode (3) (1) Thisvaluerepresentsthetimefromthewakeup eventtothefirstactiveedge ofMCLK. The wakeup timedepends on theperformance mode ofthelowsidesupervisor(SVSL)and lowsidemonitor(SVM L).Fastestwakeup timesarepossiblewithSVS Land SVM L infull performancemode ordisabledwhen operatinginAM, LPM0, and LPM1. VariousoptionsareavailableforSVS Land SVM L while operatinginLPM2, LPM3, and LPM4. See thePower Management Module and SupplyVoltageSupervisorchapterintheCC430 Family User's Guide (SLAU259 ). (2) Thisvaluerepresentsthetimefromthewakeup eventtothefirstactiveedge ofMCLK. The wakeup timedepends on theperformance mode ofthelowsidesupervisor(SVSL)and lowsidemonitor(SVM L).Inthiscase,theSVS Land SVM L areinnormalmode (lowcurrent) mode when operatinginAM, LPM0, and LPM1. VariousoptionsareavailableforSVS Land SVM L whileoperatinginLPM2, LPM3, and LPM4. See thePower Management Module and SupplyVoltageSupervisorchapterintheCC430 FamilyUser's Guide (SLAU259 ). (3) Thisvaluerepresentsthetimefromthewakeup eventtotheresetvectorexecution.

56 SubmitDocumentationFeedback Copyright© 2009–2010,Texas InstrumentsIncorporated

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailable CC430F613x CC430F612x CC430F513x www.ti.com SLAS554D –MAY 2009–REVISED JULY 2010 Timer_A overrecommended rangesofsupplyvoltageand operatingfree-airtemperature(unlessotherwisenoted) PARAMETER TEST CONDITIONS VCC MIN TYP MAX UNIT Internal:SMCLK, ACLK 1.8V/fTA Timer_A inputclockfrequency External:TACLK 25 MHz3.0VDutycycle= 50% ± 10% Allcaptureinputs. 1.8V/tTA,cap Timer_A capturetiming Minimum pulsewidthrequiredfor 20 ns3.0Vcapture. Copyright© 2009–2010,Texas InstrumentsIncorporated SubmitDocumentationFeedback 57

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailableCC430F613x CC430F612x CC430F513x SLAS554D –MAY 2009–REVISED JULY 2010 www.ti.com USCI (UART Mode) Recommended OperatingConditions PARAMETER CONDITIONS VCC MIN TYP MAX UNIT Internal:SMCLK, ACLK fUSCI USCI inputclockfrequency External:UCLK fSYSTEM MHz Dutycycle= 50% ± 10% BITCLK clockfrequencyfBITCLK 1 MHz(equalsbaud rateinMBaud) USCI (UART Mode) overrecommended rangesofsupplyvoltageand operatingfree-airtemperature(unlessotherwisenoted) PARAMETER TEST CONDITIONS VCC MIN TYP MAX UNIT 2.2V 50 600 tt UART receivedeglitchtime(1) ns

3 V 50 600

(1) Pulseson theUART receiveinput(UCxRX) shorterthantheUART receivedeglitchtimearesuppressed.To ensurethatpulsesare correctlyrecognizedtheirwidthshouldexceed themaximum specificationofthedeglitchtime. USCI (SPIMaster Mode) Recommended OperatingConditions PARAMETER CONDITIONS VCC MIN TYP MAX UNIT Internal:SMCLK, ACLKfUSCI USCI inputclockfrequency fSYSTEM MHzDutycycle= 50% ± 10% USCI (SPIMaster Mode) overrecommended rangesofsupplyvoltageand operatingfree-airtemperature(unlessotherwisenoted) (seeNote (1),Figure15 and Figure16) PMMCORPARAMETER TEST CONDITIONS VCC MIN TYP MAX UNITEVx 1.8V 55 0 ns 3.0V 38 tSU,MI SOMI inputdatasetuptime 2.4V 30 3 ns 3.0V 25 1.8V 0 0 ns 3.0V 0 tHD,MI SOMI inputdataholdtime 2.4V 0 3 ns 3.0V 0 1.8V 20 0 ns 3.0V 18UCLK edge toSIMO valid,tVALID,MO SIMO outputdatavalidtime(2) C L = 20 pF 2.4V 16 3 ns 3.0V 15 1.8V -10 0 ns 3.0V -8 tHD,MO SIMO outputdataholdtime(3) C L = 20 pF 2.4V -10 3 ns 3.0V -8 (1) fUCxCLK = 1/2tLO/HI withtLO/HI ≥ max(tVALID,MO(USCI) + tSU,SI(Slave),tSU,MI(USCI)+ tVALID,SO(Slave)). Fortheslave's parameterstSU,SI(Slave)and tVALID,SO(Slave)see theSPI parametersoftheattachedslave. (2) SpecifiesthetimetodrivethenextvaliddatatotheSIMO outputaftertheoutputchangingUCLK clockedge.See thetimingdiagrams inFigure15 and Figure16. (3) Specifieshow longdataon theSIMO outputisvalidaftertheoutputchangingUCLK clockedge.Negativevaluesindicatethatthedata on theSIMO outputcan become invalidbeforetheoutputchangingclockedge observedon UCLK. See thetimingdiagramsin Figure15 and Figure16.

58 SubmitDocumentationFeedback Copyright© 2009–2010,Texas InstrumentsIncorporated

tSU,MI tHD,MI UCLK SOMI SIMO tV ALID,MO tHD,MO CKPL =□0 CKPL =□1 tLO/HI tLO/HI 1/fUCxCLK tSU,MI tHD,MI UCLK SOMI SIMO tV ALID,MO CKPL =□0 CKPL =□1 1/fUCxCLK tHD,MO tLO/HI tLO/HI ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailable CC430F613x CC430F612x CC430F513x www.ti.com SLAS554D –MAY 2009–REVISED JULY 2010 Figure15. SPI Master Mode, CKPH = 0 Figure16. SPI Master Mode, CKPH = 1 Copyright© 2009–2010,Texas InstrumentsIncorporated SubmitDocumentationFeedback 59

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailableCC430F613x CC430F612x CC430F513x SLAS554D –MAY 2009–REVISED JULY 2010 www.ti.com USCI (SPISlaveMode) overrecommended rangesofsupplyvoltageand operatingfree-airtemperature(unlessotherwisenoted) (seeNote (1),Figure17 and Figure18) PMMCORPARAMETER TEST CONDITIONS VCC MIN TYP MAX UNITEVx 1.8V 11 0 ns 3.0V 8 tSTE,LEAD STE leadtime,STE lowtoclock 2.4V 7 3.0V 6 1.8V 3 0 ns 3.0V 3STE lagtime,LastclocktoSTEtSTE,LAG high 2.4V 3 3.0V 3 1.8V 66 0 ns 3.0V 50STE accesstime,STE lowtotSTE,ACC SOMI dataout 2.4V 36 3.0V 30 1.8V 30 0 ns 3.0V 23STE disabletime,STE hightotSTE,DIS SOMI highimpedance 2.4V 16 3.0V 13 1.8V 5 0 ns 3.0V 5 tSU,SI SIMO inputdatasetuptime 2.4V 2 3 ns 3.0V 2 1.8V 5 0 ns 3.0V 5 tHD,SI SIMO inputdataholdtime 2.4V 5 3 ns 3.0V 5 1.8V 76 0 ns 3.0V 60UCLK edge toSOMI valid,tVALID,SO SOMI outputdatavalidtime(2) C L = 20 pF 2.4V 44 3 ns 3.0V 40 1.8V 18 0 ns 3.0V 12 tHD,SO SOMI outputdataholdtime(3) C L = 20 pF 2.4V 10 3 ns 3.0V 8 (1) fUCxCLK = 1/2tLO/HI withtLO/HI ≥ max(tVALID,MO(Master)+ tSU,SI(USCI),tSU,MI(Master)+ tVALID,SO(USCI)). Forthemaster's parameterstSU,MI(Master)and tVALID,MO(Master)see theSPI parametersoftheattachedmaster. (2) SpecifiesthetimetodrivethenextvaliddatatotheSOMI outputaftertheoutputchangingUCLK clockedge.See thetimingdiagrams inFigure15 and Figure16. (3) Specifieshow longdataon theSOMI outputisvalidaftertheoutputchangingUCLK clockedge.See thetimingdiagramsinFigure15 and Figure16.

60 SubmitDocumentationFeedback Copyright© 2009–2010,Texas InstrumentsIncorporated

CKPL =□0 CKPL =□1 SOMI SIMO tSU,SI tHD,SI tV ALID,SO tSTE,LEAD 1/fUCxCLK tLO/HI tLO/HI tSTE,LAG tSTE,DIStSTE,ACC tHD,SO STE UCLK CKPL =□0 CKPL =□1 SOMI SIMO tSU,SI tHD,SI tV ALID,SO tSTE,LEAD 1/fUCxCLK tSTE,LAG tSTE,DIStSTE,ACC tHD,MO tLO/HI tLO/HI ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailable CC430F613x CC430F612x CC430F513x www.ti.com SLAS554D –MAY 2009–REVISED JULY 2010 Figure17. SPI SlaveMode, CKPH = 0 Figure18. SPI SlaveMode, CKPH = 1 Copyright© 2009–2010,Texas InstrumentsIncorporated SubmitDocumentationFeedback 61

tHD,DA T tSU,DA T tHD,ST A tHIGHtLOW tBUFtHD,ST AtSU,ST A tSP tSU,STO ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailableCC430F613x CC430F612x CC430F513x SLAS554D –MAY 2009–REVISED JULY 2010 www.ti.com USCI (I2CMode) overrecommended rangesofsupplyvoltageand operatingfree-airtemperature(unlessotherwisenoted)(seeFigure19) PARAMETER TEST CONDITIONS VCC MIN TYP MAX UNIT Internal:SMCLK, ACLK fUSCI USCI inputclockfrequency External:UCLK fSYSTEM MHz Dutycycle= 50% ± 10% fSCL SCL clockfrequency 2.2V/3V 0 400 kHz fSCL ≤ 100 kHz 4.0 tHD,STA Holdtime(repeated)START 2.2V/3V µs fSCL > 100 kHz 0.6 fSCL ≤ 100 kHz 4.7 tSU,STA Setuptimefora repeatedSTART 2.2V/3V µs fSCL > 100 kHz 0.6 tHD,DAT Data holdtime 2.2V/3V 0 ns tSU,DAT Data setuptime 2.2V/3V 250 ns fSCL ≤ 100 kHz 4.0 tSU,STO SetuptimeforSTOP 2.2V/3V µs fSCL > 100 kHz 0.6 2.2V 50 600 tSP Pulsewidthofspikessuppressedby inputfilter ns Figure19. I2C Mode Timing

62 SubmitDocumentationFeedback Copyright© 2009–2010,Texas InstrumentsIncorporated

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailable CC430F613x CC430F612x CC430F513x www.ti.com SLAS554D –MAY 2009–REVISED JULY 2010 LCD_B Recommended OperatingConditions PARAMETER CONDITIONS MIN NOM MAX UNIT Supplyvoltagerange, VCC,LCD_B,int.bias internalbiasing, LCDCPEN=0, VLCDEXT=0 2.4 3.6 V chargepump disabled Supplyvoltagerange, VCC,LCD_B,ext.bias externalbiasing, LCDCPEN=0, VLCDEXT=0 2.4 3.6 V chargepump disabled Supplyvoltagerange, externalLCD voltage, VCC,LCD_B,VLCDEXT internalorexternal LCDCPEN=0, VLCDEXT=1 2.0 3.6 V biasing,chargepump disabled ExternalLCD voltage atLCDCAP/R33, VLCDCAP/R33 internalorexternal LCDCPEN=0, VLCDEXT=1 2.4 3.6 V biasing,chargepump disabled Capacitoron LCDCAP LCDCPEN=1, VLCDx > 0000 (chargepumpC LCDCAP when chargepump 4.7 4.7 10 µFenabled)enabled LCD framefrequency fLCD = 2 × mux × fFRAME withmux= 1 (static),fFrame 0 100 Hzrange 2,3,4. ACLK inputfrequencyfACLK,in 30 32 40 kHzrange C Panel Panelcapacitance 100Hz framefrequency 10000 pF AnaloginputvoltageVR33 LCDCPEN=0, VLCDEXT=1 2.4 VCC +0.2 VatR33 VR03 +AnaloginputvoltageVR23,1/3bias LCDREXT=1, LCDEXTBIAS=1, LCD2B=0 VR13 2/3*(VR33 VR33 VatR23 -VR03 ) Analoginputvoltage VR03 + VR13,1/3bias atR13 with1/3 LCDREXT=1, LCDEXTBIAS=1, LCD2B=0 VR03 1/3*(VR33 VR23 V biasing -VR03 ) Analoginputvoltage VR03 + VR13,1/2bias atR13 with1/2 LCDREXT=1, LCDEXTBIAS=1, LCD2B=1 VR03 1/2*(VR33 VR33 V biasing -VR03 ) AnaloginputvoltageVR03 R0EXT=1 VSS VatR03 Voltagedifference VLCD -VR03 between VLCD and LCDCPEN=0, R0EXT=1 2.4 VCC +0.2 V R03 ExternalLCD referencevoltageVLCDREF/R13 VLCDREFx = 01 0.8 1.2 1.5 Vappliedat LCDREF/R13 Copyright© 2009–2010,Texas InstrumentsIncorporated SubmitDocumentationFeedback 63

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailableCC430F613x CC430F612x CC430F513x SLAS554D –MAY 2009–REVISED JULY 2010 www.ti.com LCD_B ElectricalCharacteristics overoperatingfree-airtemperaturerange(unlessotherwisenoted) PARAMETER TEST CONDITIONS VCC MIN TYP MAX UNIT VLCD LCD voltage VLCDx=0000, VLCDEXT=0 2.4V to VCC V 3.6V LCDCPEN=1, VLCDx=0001 2.0V to 2.54 V 3.6V LCDCPEN=1, VLCDx=0010 2.0V to 2.60 V 3.6V LCDCPEN=1, VLCDx=0011 2.0V to 2.66 V 3.6V LCDCPEN=1, VLCDx=0100 2.0V to 2.72 V 3.6V LCDCPEN=1, VLCDx=0101 2.0V to 2.78 V 3.6V LCDCPEN=1, VLCDx=0110 2.0V to 2.84 V 3.6V LCDCPEN=1, VLCDx=0111 2.0V to 2.90 V 3.6V LCDCPEN=1, VLCDx=1000 2.0V to 2.96 V 3.6V LCDCPEN=1, VLCDx=1001 2.0V to 3.02 V 3.6V LCDCPEN=1, VLCDx=1010 2.0V to 3.08 V 3.6V LCDCPEN=1, VLCDx=1011 2.0V to 3.14 V 3.6V LCDCPEN=1, VLCDx=1100 2.0V to 3.20 V 3.6V LCDCPEN=1, VLCDx=1101 2.2V to 3.26 V 3.6V LCDCPEN=1, VLCDx=1110 2.2V to 3.32 V 3.6V LCDCPEN=1, VLCDx=1111 2.2V to 3.38 3.6 V 3.6V ICC,Peak,CP Peak supplycurrentsdue to LCDCPEN=1, VLCDx=1111 2.2V 200 µA chargepump activities tLCD,CP,on Time tochargeC LCD when C LCDCAP =4.7µF,LCDCPEN=0 →1, 2.2V 100 500 ms discharge VLCDx=1111 ICP,Load Max. chargepump loadcurrent LCDCPEN=1, VLCDx=1111 2.2V 50 µA R LCD,Seg LCD driveroutputimpedance, LCDCPEN=1, VLCDx=1000, 2.2V 10 kΩ segment lines ILOAD =±10µA R LCD,COM LCD driveroutputimpedance, LCDCPEN=1, VLCDx=1000, 2.2V 10 kΩ common lines ILOAD =±10µA

64 SubmitDocumentationFeedback Copyright© 2009–2010,Texas InstrumentsIncorporated

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailable CC430F613x CC430F612x CC430F513x www.ti.com SLAS554D –MAY 2009–REVISED JULY 2010 12-BitADC, Power Supply and InputRange Conditions overrecommended rangesofsupplyvoltageand operatingfree-airtemperature(unlessotherwisenoted)(1) PARAMETER TEST CONDITIONS VCC MIN TYP MAX UNIT AV CC and DV CC areconnectedtogether,AnalogsupplyvoltageAV CC AV SS and DV SS areconnectedtogether, 2.2 3.6 VFullperformance V(AVSS) = V(DVSS) = 0 V V(Ax) Analoginputvoltagerange(2) AllADC12 analoginputpinsAx 0 AV CC V fADC12CLK = 5.0MHz, ADC12ON = 1, 2.2V 125 155OperatingsupplycurrentintoIADC12_A REFON = 0,SHT0 = 0,SHT1 = 0, µAAV CC terminal(3)

3 V 150 220ADC12DIV = 0

Onlyone terminalAx can be selectedatoneC I Inputcapacitance 2.2V 20 25 pFtime R I InputMUX ON resistance 0 V ≤ VAx ≤ AV CC 10 200 1900 Ω (1) The leakagecurrentisspecifiedby thedigitalI/Oinputleakage. (2) The analoginputvoltagerangemust be withintheselectedreferencevoltagerangeVR+ toVR – forvalidconversionresults.Ifthe referencevoltageissuppliedby an externalsourceoriftheinternalreferencevoltageisused and REFOUT = 1,thendecoupling capacitorsarerequired.See REF, ExternalReferenceand REF, Built-InReference. (3) The internalreferencesupplycurrentisnotincludedincurrentconsumptionparameterIADC12_A . 12-BitADC, Timing Parameters overrecommended rangesofsupplyvoltageand operatingfree-airtemperature(unlessotherwisenoted) PARAMETER TEST CONDITIONS VCC MIN TYP MAX UNIT ForspecifiedperformanceofADC12 linearityfADC12CLK 2.2V/3V 0.45 4.8 5.4 MHzparameters InternalADC12fADC12OSC ADC12DIV = 0,fADC12CLK = fADC12OSC 2.2V/3V 4.2 4.8 5.4 MHzoscillator(1) tCONVERT Conversiontime µs ExternalfADC12CLK fromACLK, MCLK orSMCLK, (2) ADC12SSEL ≠ 0 R S = 400 Ω,R I= 1000 Ω,C I= 30 pF,tSample Samplingtime 2.2V/3V 1000 nst = [RS + R I]× C I (3) (1) The ADC12OSC issourceddirectlyfromMODOSC insidetheUCS. (2) 13 × ADC12DIV × 1/fADC12CLK (3) ApproximatelytenTau (t)areneeded togetan erroroflessthan±0.5LSB: tSample = ln(2n+1)x (RS + R I)× C I+ 800 ns,where n = ADC resolution= 12,R S = externalsourceresistance 12-BitADC, LinearityParameters overrecommended rangesofsupplyvoltageand operatingfree-airtemperature(unlessotherwisenoted) PARAMETER TEST CONDITIONS VCC MIN TYP MAX UNIT Differential (VeREF+ – VREF –/VeREF –)min≤ (VeREF+ – VREF –/VeREF –),ED 2.2V/3V ±1.0 LSBlinearityerror(DNL) C VREF+ = 20 pF (VeREF+ – VREF –/VeREF –)min≤ (VeREF+ – VREF –/VeREF –),EO Offseterror 2.2V/3V ±1.0 ±2.0 LSBInternalimpedance ofsourceR S < 100 Ω,C VREF+ = 20 pF (VeREF+ – VREF –/VeREF –)min≤ (VeREF+ – VREF –/VeREF –),EG Gain error 2.2V/3V ±1.0 ±2.0 LSBC VREF+ = 20 pF Totalunadjusted (VeREF+ – VREF –/VeREF –)min≤ (VeREF+ – VREF –/VeREF –),ET 2.2V/3V ±1.4 ±3.5 LSBerror C VREF+ = 20 pF Copyright© 2009–2010,Texas InstrumentsIncorporated SubmitDocumentationFeedback 65

-40 -30 -20 -10 0 10 20 30 40 50 60 70 80 Typical Temperature Sensor Voltage - mV Ambient□Temperature□- ˚C ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailableCC430F613x CC430F612x CC430F513x SLAS554D –MAY 2009–REVISED JULY 2010 www.ti.com 12-BitADC, Temperature Sensor and Built-InVMID (1) overrecommended rangesofsupplyvoltageand operatingfree-airtemperature(unlessotherwisenoted) PARAMETER TEST CONDITIONS VCC MIN TYP MAX UNIT 2.2V 680ADC12ON = 1,INCH = 0Ah,VSENSOR See (2)(3) mVTA = 0°C 3 V 680 2.2V 2.25 TC SENSOR See (3) ADC12ON = 1,INCH = 0Ah mV/°C 3 V 2.25 2.2V 30Sample timerequiredif ADC12ON = 1,INCH = 0Ah,tSENSOR(sample) µschannel10 isselected(4) Errorofconversionresult≤ 1 LSB 3 V 30 AV CC divideratchannel11, ADC12ON = 1,INCH = 0Bh 0.48 0.5 0.52 VAVCCVAVCC factor VMID 2.2V 1.06 1.1 1.14 AV CC divideratchannel11 ADC12ON = 1,INCH = 0Bh V 3 V 1.44 1.5 1.56 Sample timerequiredif ADC12ON = 1,INCH = 0Bh,tVMID(sample) 2.2V/3V 1000 nschannel11 isselected(5) Errorofconversionresult≤ 1 LSB (1) The temperaturesensorisprovidedby theREF module.See theREF module parametric,IREF+ ,regardingthecurrentconsumptionof thetemperaturesensor. (2) The temperaturesensoroffsetcan be as much as ±20°C. A single-pointcalibrationisrecommended inordertominimizetheoffseterror ofthebuilt-intemperaturesensor. (3) The devicedescriptorstructurecontainscalibrationvaluesfor30°C ± 3°C and 85°C ± 3°C foreach oftheavailablereferencevoltage levels.The sensorvoltagecan be computed as VSENSE = TC SENSOR *(Temperature,°C) + VSENSOR ,where TC SENSOR and VSENSOR can be computed fromthecalibrationvaluesforhigheraccuracy. (4) The typicalequivalentimpedance ofthesensoris51 kΩ.The sample timerequiredincludesthesensor-ontimetSENSOR(on) . (5) The on-timetVMID(on) isincludedinthesamplingtimetVMID(sample);no additionalon timeisneeded. Figure20. TypicalTemperature Sensor Voltage

66 SubmitDocumentationFeedback Copyright© 2009–2010,Texas InstrumentsIncorporated

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailable CC430F613x CC430F612x CC430F513x www.ti.com SLAS554D –MAY 2009–REVISED JULY 2010 REF, ExternalReference overrecommended rangesofsupplyvoltageand operatingfree-airtemperature(unlessotherwisenoted)(1) PARAMETER TEST CONDITIONS VCC MIN TYP MAX UNIT VeREF+ Positiveexternalreferencevoltageinput VeREF+ > VREF –/VeREF – (2) 1.4 AV CC V VREF –/VeREF – Negativeexternalreferencevoltageinput VeREF+ > VREF –/VeREF – (3) 0 1.2 V (VeREF+ – Differentialexternalreferencevoltage VeREF+ > VREF –/VeREF – (4) 1.4 AV CC VVREF –/VeREF –) input 1.4V ≤ VeREF+ ≤ VAVCC , VeREF – = 0 V fADC12CLK = 5 2.2V/3V ±8.5 ±26 µA MHz,ADC12SHTx = 1h, Conversionrate200kspsIVeREF+ StaticinputcurrentIVREF –/VeREF – 1.4V ≤ VeREF+ ≤ VAVCC , VeREF – = 0 V fADC12CLK = 5 2.2V/3V ±1 µA MHz,ADC12SHTx = 8h, Conversionrate20ksps C VREF+/- CapacitanceatVREF+/- terminal (5)10 µF (1) The externalreferenceisused duringADC conversiontochargeand dischargethecapacitancearray.The inputcapacitance,C i,isalso thedynamicloadforan externalreferenceduringconversion.The dynamicimpedance ofthereferencesupplyshouldfollowthe recommendationson analog-sourceimpedance toallowthechargetosettlefor12-bitaccuracy. (2) The accuracylimitstheminimum positiveexternalreferencevoltage.Lower referencevoltagelevelsmay be appliedwithreduced accuracyrequirements. (3) The accuracylimitsthemaximum negativeexternalreferencevoltage.Higherreferencevoltagelevelsmay be appliedwithreduced accuracyrequirements. (4) The accuracylimitsminimum externaldifferentialreferencevoltage.Lower differentialreferencevoltagelevelsmay be appliedwith reducedaccuracyrequirements. (5) Two decouplingcapacitors,10µF and 100nF,shouldbe connectedtoVREF todecouplethedynamiccurrentrequiredforan external referencesourceifitisused fortheADC12_A. See alsotheCC430 FamilyUser's Guide (SLAU259 ). Copyright© 2009–2010,Texas InstrumentsIncorporated SubmitDocumentationFeedback 67

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailableCC430F613x CC430F612x CC430F513x SLAS554D –MAY 2009–REVISED JULY 2010 www.ti.com REF, Built-InReference overrecommended rangesofsupplyvoltageand operatingfree-airtemperature(unlessotherwisenoted)(1) PARAMETER TEST CONDITIONS VCC MIN TYP MAX UNIT REFVSEL = 2 for2.5V REFON = REFOUT = 1 3 V 2.41 ±1.5% IVREF+ = 0 A REFVSEL = 1 for2.0VPositivebuilt-inreferenceVREF+ REFON = REFOUT = 1 3 V 1.93 ±1.5% Vvoltageoutput IVREF+ = 0 A REFVSEL = 0 for1.5V REFON = REFOUT = 1 2.2V/3 V 1.45 ±1.5% IVREF+ = 0 A REFVSEL = 0 for1.5V,reducedperformance 1.8 AV CC minimum voltage, REFVSEL = 0 for1.5V 2.2 AV CC(min) Positivebuilt-inreference V REFVSEL = 1 for2.0V 2.3active REFVSEL = 2 for2.5V 2.8 REFON = 1,REFOUT = 0,REFBURST = 0 3 V 100 140 µAOperatingsupplycurrentintoIREF+ AV CC terminal(2)(3) REFON = 1,REFOUT = 1,REFBURST = 0 3 V 0.9 1.5 mA REFVSEL = 0,1,2 Load-currentregulation, IVREF+ = +10 µA/–1000 µAIL(VREF+) 2500 µV/mAVREF+ terminal(4) AV CC = AV CC (min)foreach referencelevel. REFVSEL = 0,1,2;REFON = REFOUT = 1 CapacitanceatVREF+/-C VREF+/- REFON = REFOUT = 1(5) 20 100 pFterminals IVREF+ = 0 ATemperaturecoefficientof ppm/TC REF+ REFVSEL = 0,1,2; 30 50built-inreference(6) °CREFON = 1,REFOUT = 0 or1 AV CC = AV CC (min)-AV CC(max) Power supplyrejectionratio TA = 25 °CPSRR_DC 120 300 µV/V(DC) REFVSEL = 0,1,2; REFON = 1,REFOUT = 0 or1 AV CC = AV CC (min)-AV CC(max) TA = 25 °CPower supplyrejectionratioPSRR_AC f= 1 kHz,ΔVpp = 100 mV 6.4 mV/V(AC) REFVSEL = 0,1,2; REFON = 1,REFOUT = 0 or1 AV CC = AV CC (min)-AV CC(max) REFVSEL = 0,1,2; 75 REFOUT = 0,REFON = 0 → 1 SettlingtimeofreferencetSETTLE µsAV CC = AV CC (min)-AV CC(max)voltage(7) C VREF = C VREF (max) 75REFVSEL = 0,1,2; REFOUT = 1,REFON = 0 → 1 (1) The referenceissuppliedtotheADC by theREF module and isbufferedlocallyinsidetheADC. The ADC uses two internalbuffers,one smallerand one largerfordrivingtheVREF+ terminal.When REFOUT = 1,thereferenceisavailableattheVREF+ terminal,as wellas, used as thereferencefortheconversionand utilizesthelargerbuffer.When REFOUT = 0,thereferenceisonlyused as thereference fortheconversionand utilizesthesmallerbuffer. (2) The internalreferencecurrentissuppliedviaterminalAV CC .ConsumptionisindependentoftheADC12ON controlbit,unlessa conversionisactive.The REFON bitenablestosettlethebuilt-inreferencebeforestartingan A/D conversion.REFOUT = 0 represents thecurrentcontributionofthesmallerbuffer.REFOUT = 1 representsthecurrentcontributionofthelargerbufferwithoutexternalload. (3) The temperaturesensorisprovidedby theREF module.ItscurrentissuppliedviaterminalAV CC and isequivalenttoIREF+ withREFON =1 and REFOUT = 0. (4) Contributiononlydue tothereferenceand bufferincludingpackage.Thisdoes notincluderesistancedue toPCB trace,etc. (5) Two decouplingcapacitors,10µF and 100nF,shouldbe connectedtoVREF todecouplethedynamiccurrentrequiredforan external referencesourceifitisused fortheADC12_A. (6) Calculatedusingthebox method:(MAX(-40to85°C) – MIN(-40to85°C))/MIN(-40to85°C)/(85°C – (–40°C)). (7) The conditionisthattheerrorina conversionstartedaftertREFON islessthan±0.5LSB. The settlingtimedepends on theexternal capacitiveloadwhen REFOUT = 1.

68 SubmitDocumentationFeedback Copyright© 2009–2010,Texas InstrumentsIncorporated

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailable CC430F613x CC430F612x CC430F513x www.ti.com SLAS554D –MAY 2009–REVISED JULY 2010 Comparator B overrecommended rangesofsupplyvoltageand operatingfree-airtemperature(unlessotherwisenoted) PARAMETER TEST CONDITIONS VCC MIN TYP MAX UNIT VCC Supplyvoltage 1.8 3.6 V 1.8V 40 CBPWRMD = 00 2.2V 30 50Comparatoroperatingsupply IAVCC_COMP currentintoAV CC ,Excludes 3.0V 40 65 µA referenceresistorladder CBPWRMD = 01 2.2/3.0V 10 30 CBPWRMD = 10 2.2/3.0V 0.1 0.5 Quiescentcurrentoflocal IAVCC_REF referencevoltageamplifierinto CBREFACC = 1,CBREFLx = 01 22 µA AV CC VIC Common mode inputrange 0 VCC -1 V CBPWRMD = 00 ±20 mV VOFFSET Inputoffsetvoltage CBPWRMD = 01,10 ±10 mV C IN Inputcapacitance 5 pF ON -switchclosed 3 4 kΩ R SIN Seriesinputresistance OFF -switchopened 30 M Ω CBPWRMD = 00,CBF = 0 450 ns tPD Propagationdelay,responsetime CBPWRMD = 01,CBF = 0 600 ns CBPWRMD = 10,CBF = 0 50 µs CBPWRMD = 00,CBON = 1, 0.35 0.6 1.0 µsCBF = 1,CBFDLY = 00 CBPWRMD = 00,CBON = 1, 1.8 3.4 6.5 µsCBF = 1,CBFDLY = 11 Comparatorenabletime,settlingCBON = 0 toCBON = 1,tEN_CMP 1 2 µstime CBPWRMD = 00,01,10 tEN_REF Resistorreferenceenabletime CBON = 0 toCBON = 1 0.3 1.5 µs VIN = referenceintoresistorladder,VCB_REF Referencevoltagefora giventap VIN × (n+1)/32 Vn = 0 to31 Copyright© 2009–2010,Texas InstrumentsIncorporated SubmitDocumentationFeedback 69

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailableCC430F613x CC430F612x CC430F513x SLAS554D –MAY 2009–REVISED JULY 2010 www.ti.com FlashMemory overrecommended rangesofsupplyvoltageand operatingfree-airtemperature(unlessotherwisenoted) TESTPARAMETER MIN TYP MAX UNITCONDITIONS DV CC(PGM/ERASE) Program and erasesupplyvoltage 1.8 3.6 V IPGM AveragesupplycurrentfromDV CC duringprogram 3 5 mA IERASE AveragesupplycurrentfromDV CC duringerase 2 mA IMERASE ,IBANK AveragesupplycurrentfromDV CC duringmass eraseorbank erase 2 mA tCPT Cumulativeprogramtime(1) 16 ms Program/eraseendurance 104 105 cycles tRetention Data retentionduration TJ = 25°C 100 years tWord Word orbyteprogramtime(2) 64 85 µs tBlock,0 Blockprogramtimeforfirstbyteorword(2) 49 65 µs Blockprogramtimeforeach additionalbyteorword,exceptforlasttBlock,1–(N–1) 37 49 µsbyteorword(2) tBlock,N Blockprogramtimeforlastbyteorword(2) 55 73 µs Erasetimeforsegment erase,mass erase,and bank erasewhentErase 23 32 msavailable(2) MCLK frequencyinmarginalreadmodefMCLK,MGR 0 1 MHz(FCTL4.MGR0 = 1 orFCTL4. MGR1 = 1) (1) The cumulativeprogramtimemust notbe exceeded when writingtoa 128-byteflashblock.Thisparameterappliestoallprogramming methods:individualword/bytewriteand blockwritemodes. (2) These valuesarehardwiredintotheflashcontroller's statemachine. JTAG and Spy-Bi-WireInterface overrecommended rangesofsupplyvoltageand operatingfree-airtemperature(unlessotherwisenoted) TESTPARAMETER MIN TYP MAX UNITCONDITIONS fSBW Spy-Bi-Wireinputfrequency 2.2V/3V 0 20 MHz tSBW,Low Spy-Bi-Wirelowclockpulselength 2.2V/3V 0.025 15 µs Spy-Bi-Wireenabletime(TEST hightoacceptanceoffirstclocktSBW, En 2.2V/3V 1 µsedge)(1) tSBW,Rst Spy-Bi-Wirereturntonormaloperationtime 15 100 µs 2.2V 0 5 MHz fTCK TCK inputfrequency-4-wireJTAG (2)

3 V 0 10 MHz

R internal Internalpull-downresistanceon TEST 2.2V/3V 45 60 80 kΩ (1) ToolsaccessingtheSpy-Bi-Wireinterfaceneed towaitfortheminimum tSBW,En timeafterpullingtheTEST/SBWTCK pinhighbefore applyingthefirstSBWTCK clockedge. (2) fTCK may be restrictedtomeet thetimingrequirementsofthemodule selected.

70 SubmitDocumentationFeedback Copyright© 2009–2010,Texas InstrumentsIncorporated

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailable CC430F613x CC430F612x CC430F513x www.ti.com SLAS554D –MAY 2009–REVISED JULY 2010 RF1A CC1101-Based Radio Parameters Recommended OperatingConditions PARAMETER TEST CONDITIONS MIN TYP MAX UNIT VCC Supplyvoltagerangeduringradiooperation 2.0 3.6 V PMMCOREVx Core voltagerange,PMMCOREVx settingduringradiooperation 2 3 300 348 RF frequencyrange 389(1) 464 MHz 779 928 2-FSK 0.6 500 Data rate 2-GFSK, OOK, and ASK 0.6 250 kBaud (Shaped)MSK (alsoknown as differentialoffsetQPSK) (2) 26 500 RF crystalfrequency 26 26 27 MHz RF crystaltolerance Totaltoleranceincludinginitialtolerance,crystalloading,agingand ±40 ppm temperaturedependency.(3) RF crystalloadcapacitance 10 13 20 pF RF crystaleffectiveseries 100 Ω resistance (1) Ifusinga 27-MHz crystal,thelowerfrequencylimitforthisband is392 MHz. (2) IfusingoptionalManchesterencoding,thedatarateinkbps ishalfthebaud rate. (3) The acceptablecrystaltolerancedepends on frequencyband,channelbandwidth,and spacing.Alsosee DesignNote DN005 --CC11xx SensitivityversusFrequencyOffsetand CrystalAccuracy,literaturenumber SWRA122 . RF CrystalOscillator,XT2 TA = 25°C, VCC = 3 V (unlessotherwisenoted)(1) PARAMETER TEST CONDITIONS MIN TYP MAX UNIT Start-uptime(2) 150 810 µs Dutycycle 45 50 55 % (1) Allmeasurement resultsareobtainedusingtheEM430F6137RF900 withBOM accordingtotestedfrequencyrange(seeTable46). (2) The start-uptimedepends toa verylargedegreeon theused crystal. CurrentConsumption, Reduced-Power Modes TA = 25°C, VCC = 3 V (unlessotherwisenoted)(1) PARAMETER TEST CONDITIONS MIN TYP MAX UNIT Current RF crystaloscillatoronly(e.g.SLEEP statewithMCSM0.OSC_FORCE_ON = 1) 100 µA consumption IDLE state(incl.RF crystaloscillator) 1.7 mA FSTXON state(Onlythefrequencysynthesizerisrunning)(2) 9.5 mA (1) Allmeasurement resultsareobtainedusingtheEM430F6137RF900 withBOM accordingtotestedfrequencyrange(seeTable46). (2) Thiscurrentconsumptionisalsorepresentativeofotherintermediatestateswhen goingfromIDLE toRX orTX, includingthecalibration state. Copyright© 2009–2010,Texas InstrumentsIncorporated SubmitDocumentationFeedback 71

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailableCC430F613x CC430F612x CC430F513x SLAS554D –MAY 2009–REVISED JULY 2010 www.ti.com CurrentConsumption, Receive Mode TA = 25°C, VCC = 3 V (unlessotherwisenoted)(1)(2) DATAFREQPARAMETER RATE TEST CONDITIONS MIN TYP MAX UNIT(MHz) (kBaud) Inputat-100dBm (closeto 17sensitivitylimit) 1.2 Inputat-40dBm (wellabove 16sensitivitylimit) Inputat-100dBm (closeto 17Registersettings sensitivitylimit) 315 38.4 optimizedforreduced Inputat-40dBm (wellabovecurrent 16sensitivitylimit) Inputat-100dBm (closeto 18sensitivitylimit) 250 Inputat-40dBm (wellabove 16.5sensitivitylimit) Inputat-100dBm (closeto 18sensitivitylimit) 1.2 Inputat-40dBm (wellabove 17sensitivitylimit) Inputat-100dBm (closeto 18Current Registersettings sensitivitylimit) consumption, 433 38.4 optimizedforreduced mA Inputat-40dBm (wellaboveRX current 17sensitivitylimit) Inputat-100dBm (closeto 18.5sensitivitylimit) 250 Inputat-40dBm (wellabove 17sensitivitylimit) Inputat-100dBm (closeto 16sensitivitylimit) 1.2 Inputat-40dBm (wellabove 15sensitivitylimit) Inputat-100dBm (closeto 16Registersettings sensitivitylimit) 868,915 38.4 optimizedforreduced Inputat-40dBm (wellabovecurrent(3) 15sensitivitylimit) Inputat-100dBm (closeto 16sensitivitylimit) 250 Inputat-40dBm (wellabove 15sensitivitylimit) (1) Allmeasurement resultsareobtainedusingtheEM430F6137RF900 withBOM accordingtotestedfrequencyrange(seeTable46). (2) Reduced currentsetting(MDMCFG2.DEM_DCFILT_OFF = 1)givesa slightlylowercurrentconsumptionatthecostofa reductionin sensitivity.See tables"RF Receive"foradditionaldetailson currentconsumptionand sensitivity. (3) For868/915MHz, see Figure21 forcurrentconsumptionwithregistersettingsoptimizedforsensitivity.

72 SubmitDocumentationFeedback Copyright© 2009–2010,Texas InstrumentsIncorporated

-100 -80 -60 -40 -20 Input Power [dBm] Radio Current [mA] TA = 85°C TA = 25°C TA = -40°C -100 -80 -60 -40 -20 Input Power [dBm] Radio Current [mA] TA = 85°C TA = 25°C TA = -40°C -100 -80 -60 -40 -20 Input Power [dBm] Radio Current [mA] TA = 85°C TA = 25°C TA = -40°C -100 -80 -60 -40 -20 Input Power [dBm] Radio Current [mA] TA = 85°C TA = 25°C TA = -40°C 1.2 kBaud GFSK 250 kBaud GFSK 38.4 kBaud GFSK 500 kBaud MSK ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailable CC430F613x CC430F612x CC430F513x www.ti.com SLAS554D –MAY 2009–REVISED JULY 2010 Figure21. TypicalRX CurrentConsumption Over Temperature and InputPower Level,868 MHz, Sensitivity-OptimizedSetting Copyright© 2009–2010,Texas InstrumentsIncorporated SubmitDocumentationFeedback 73

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailableCC430F613x CC430F612x CC430F513x SLAS554D –MAY 2009–REVISED JULY 2010 www.ti.com CurrentConsumption, TransmitMode TA = 25°C, VCC = 3 V (unlessotherwisenoted)(1)(2) FREQUENCY PATABLE OUTPUTPARAMETER MIN TYP MAX UNIT[MHz} Setting POWER [dBm] 0xC0 max. 26 mA 0xC4 +10 25 mA 315 0x51 0 15 mA 0x29 -6 15 mA 0xC0 max. 33 mA 0xC6 +10 29 mA 433 0x50 0 17 mA 0x2D -6 17 mA Currentconsumption,TX 0xC0 max. 36 mA 0xC3 +10 33 mA 868 0x8D 0 18 mA 0x2D -6 18 mA 0xC0 max. 35 mA 0xC3 +10 32 mA 915 0x8D 0 18 mA 0x2D -6 18 mA (1) Allmeasurement resultsareobtainedusingtheEM430F6137RF900 withBOM accordingtotestedfrequencyrange(seeTable46). (2) Reduced currentsetting(MDMCFG2.DEM_DCFILT_OFF = 1)givesa slightlylowercurrentconsumptionatthecostofa reductionin sensitivity.See tables"RF Receive"foradditionaldetailson currentconsumptionand sensitivity.

74 SubmitDocumentationFeedback Copyright© 2009–2010,Texas InstrumentsIncorporated

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailable CC430F613x CC430F612x CC430F513x www.ti.com SLAS554D –MAY 2009–REVISED JULY 2010 TypicalTX CurrentConsumption, 315 MHz Output VCC 2.0V 3.0V 3.6VPATABLEPARAMETER Power UNITSetting TA 25°C 25°C 25°C[dBm] 0xC0 max. 27.5 26.4 28.1 Current 0xC4 +10 25.1 25.2 25.3 consumption, mA 0x51 0 14.4 14.6 14.7TX 0x29 -6 14.2 14.7 15.0 TypicalTX CurrentConsumption, 433 MHz Output VCC 2.0V 3.0V 3.6VPATABLEPARAMETER Power UNITSetting TA 25°C 25°C 25°C[dBm] 0xC0 max. 33.1 33.4 33.8 Current 0xC6 +10 28.6 28.8 28.8 consumption, mA 0x50 0 16.6 16.8 16.9TX 0x2D -6 16.8 17.5 17.8 TypicalTX CurrentConsumption, 868 MHz Output VCC 2.0V 3.0V 3.6VPATABLEPARAMETER Power UNITSetting TA -40°C 25°C 85°C -40°C 25°C 85°C -40°C 25°C 85°C[dBm] consumption, mA TypicalTX CurrentConsumption, 915 MHz Output VCC 2.0V 3.0V 3.6VPATABLEPARAMETER Power UNITSetting TA -40°C 25°C 85°C -40°C 25°C 85°C -40°C 25°C 85°C[dBm] consumption, mA Copyright© 2009–2010,Texas InstrumentsIncorporated SubmitDocumentationFeedback 75

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailableCC430F613x CC430F612x CC430F513x SLAS554D –MAY 2009–REVISED JULY 2010 www.ti.com RF Receive,Overall TA = 25°C, VCC = 3 V (unlessotherwisenoted)(1) PARAMETER TEST CONDITIONS MIN TYP MAX UNIT Digitalchannelfilterbandwidth(2) 58 812 kHz

25 MHz to1 GHz -68 -57

Spuriousemissions(3)(4) dBm Above 1 GHz -66 -47 RX latency Serialoperation(5) 9 bit (1) Allmeasurement resultsareobtainedusingtheEM430F6137RF900 withBOM accordingtotestedfrequencyrange(seeTable46). (2) User programmable.The bandwidthlimitsareproportionaltocrystalfrequency(givenvaluesassume a 26.0MHz crystal) (3) Typicalradiatedspuriousemissionis-49dBm measured attheVCO frequency (4) Maximum figureistheETSI EN 300 220 limit (5) Time fromstartofreceptionuntildataisavailableon thereceiverdataoutputpinisequalto9 bit. RF Receive,315 MHz TA = 25°C, VCC = 3 V (unlessotherwisenoted)(1) 2-FSK,1% packeterrorrate,20-bytepacketlength,Sensitivityoptimized,MDMCFG2.DEM_DCFILT_OFF = 0 (unless otherwisenoted) DATA RATEPARAMETER TEST CONDITIONS MIN TYP MAX UNIT(kBaud) 0.6 14.3kHzdeviation,58kHz digitalchannelfilterbandwidth -117 1.2 5.2kHzdeviation,58kHz digitalchannelfilterbandwidth(2) -111 Receiversensitivity 38.4 20kHz deviation,100kHz digitalchannelfilterbandwidth(3) -103 dBm 250 127kHz deviation,540kHz digitalchannelfilterbandwidth(4) -95

500 MSK, 812kHz digitalchannelfilterbandwidth(4) -86

(1) Allmeasurement resultsareobtainedusingtheEM430F6137RF900 withBOM accordingtotestedfrequencyrange(seeTable46). (2) Sensitivitycan be tradedforcurrentconsumptionby settingMDMCFG2.DEM_DCFILT_OFF=1. The typicalcurrentconsumptionisthen reducedby about2mA closetothesensitivitylimit.The sensitivityistypicallyreducedto-109dBm. (3) Sensitivitycan be tradedforcurrentconsumptionby settingMDMCFG2.DEM_DCFILT_OFF=1. The typicalcurrentconsumptionisthen reducedby about2mA closetothesensitivitylimit.The sensitivityistypicallyreducedto-102dBm. (4) MDMCFG2.DEM_DCFILT_OFF=1 can notbe used fordatarates≥ 250kBaud. RF Receive,433 MHz TA = 25°C, VCC = 3 V (unlessotherwisenoted)(1) 2-FSK,1% packeterrorrate,20-bytepacketlength,Sensitivityoptimized,MDMCFG2.DEM_DCFILT_OFF = 0 (unless otherwisenoted) DATA RATEPARAMETER TEST CONDITIONS MIN TYP MAX UNIT(kBaud) 0.6 14.3kHzdeviation,58kHz digitalchannelfilterbandwidth -114 1.2 5.2-kHzdeviation,58-kHzdigitalchannelfilterbandwidth(2) -111 38.4 20-kHzdeviation,100-kHzdigitalchannelfilterbandwidth(3) -104Receiversensitivity dBm 127-kHzdeviation,540-kHzdigitalchannelfilterbandwidth250 -93(4)

500 MSK, 812kHz digitalchannelfilterbandwidth(4) -85

(1) Allmeasurement resultsareobtainedusingtheEM430F6137RF900 withBOM accordingtotestedfrequencyrange(seeTable46). (2) Sensitivitycan be tradedforcurrentconsumptionby settingMDMCFG2.DEM_DCFILT_OFF=1. The typicalcurrentconsumptionisthen reducedby about2mA closetothesensitivitylimit.The sensitivityistypicallyreducedto-109dBm. (3) Sensitivitycan be tradedforcurrentconsumptionby settingMDMCFG2.DEM_DCFILT_OFF=1. The typicalcurrentconsumptionisthen reducedby about2mA closetothesensitivitylimit.The sensitivityistypicallyreducedto-101dBm. (4) MDMCFG2.DEM_DCFILT_OFF=1 can notbe used fordatarates≥ 250kBaud.

76 SubmitDocumentationFeedback Copyright© 2009–2010,Texas InstrumentsIncorporated

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailable CC430F613x CC430F612x CC430F513x www.ti.com SLAS554D –MAY 2009–REVISED JULY 2010 RF Receive,868/915MHz TA = 25°C, VCC = 3 V (unlessotherwisenoted)(1) 1% packeterrorrate,20-bytepacketlength,Sensitivityoptimized,MDMCFG2.DEM_DCFILT_OFF = 0 (unlessotherwise noted) PARAMETER TEST CONDITIONS MIN TYP MAX UNIT 0.6-kBauddatarate,2-FSK,14.3-kHzdeviation,58-kHz digitalchannel filterbandwidth (unlessotherwisenoted) Receiversensitivity -115 dBm 1.2-kBauddatarate,2-FSK,5.2-kHzdeviation,58-kHz digitalchannel filterbandwidth (unlessotherwisenoted) -109 Receiversensitivity(2) dBm2-GFSK modulationby settingMDMCFG2.MOD_FORMAT=2, -109GaussianfilterwithBT = 0.5 Saturation FIFOTHR.CLOSE_IN_RX=0 (3) -28 dBm -100-kHzoffset 39Adjacentchannel Desiredchannel3 dB above thesensitivitylimit, dBrejection 100 kHz channelspacing(4) +100-kHz offset 39 IFfrequency152 kHz,desiredchannel3 dB aboveImage channelrejection 29 dBthesensitivitylimit ±2 MHz offset -48 dBm Blocking Desiredchannel3 dB above thesensitivitylimit(5) ±10 MHz offset -40 dBm 38.4-kBauddatarate,2-FSK,20-kHz deviation,100-kHz digitalchannel filterbandwidth (unlessotherwisenoted) Receiversensitivity(6) -102 dBm2-GFSK modulationby settingMDMCFG2.MOD_FORMAT = 2, -101GaussianfilterwithBT = 0.5 Saturation FIFOTHR.CLOSE_IN_RX=0 (3) -19 dBm Adjacentchannel Desiredchannel3 dB above thesensitivitylimit, -200-kHzoffset 20 dBrejection 200 kHz channelspacing(5) +200-kHz offset 25 Image channelrejectionIFfrequency152 kHz,Desiredchannel3 dB above thesensitivitylimit 23 dB Blocking Desiredchannel3 dB above thesensitivitylimit(5) ±2-MHz offset -48 dBm ±10-MHz offset -40 dBm 250-kBaud datarate,2-FSK,127-kHz deviation,540-kHz digitalchannel filterbandwidth (unlessotherwisenoted) Receiversensitivity(7) -90 dBm2-GFSK modulationby settingMDMCFG2.MOD_FORMAT = 2, -90GaussianfilterwithBT = 0.5 Saturation FIFOTHR.CLOSE_IN_RX=0 (3) -19 dBm Adjacentchannel Desiredchannel3 dB above thesensitivitylimit, -750-kHzoffset 24 dBrejection 750-kHzchannelspacing(8) +750-kHz offset 30 Image channelrejectionIFfrequency304 kHz,Desiredchannel3 dB above thesensitivitylimit 18 dB Blocking Desiredchannel3 dB above thesensitivitylimit(8) ±2-MHz offset -53 dBm ±10-MHz offset -39 dBm 500-kBaud datarate,MSK, 812-kHz digitalchannel filterbandwidth (unlessotherwisenoted) Receiversensitivity(7) -84 dBm Image channelrejectionIFfrequency355 kHz,Desiredchannel3 dB above thesensitivitylimit -2 dB Blocking Desiredchannel3 dB above thesensitivitylimit(9) ±2-MHz offset -53 dBm ±10-MHz offset -38 dBm (1) Allmeasurement resultsareobtainedusingtheEM430F6137RF900 withBOM accordingtotestedfrequencyrange(seeTable46). (2) Sensitivitycan be tradedforcurrentconsumptionby settingMDMCFG2.DEM_DCFILT_OFF=1. The typicalcurrentconsumptionisthen reducedby about2mA closetothesensitivitylimit.The sensitivityistypicallyreducedto-107dBm (3) See DesignNote DN010 Close-inReceptionwithCC1101 ,literaturenumber SWRA147 . (4) See Figure22 forblockingperformanceatotheroffsetfrequencies. (5) See Figure23 forblockingperformanceatotheroffsetfrequencies. (6) Sensitivitycan be tradedforcurrentconsumptionby settingMDMCFG2.DEM_DCFILT_OFF=1. The typicalcurrentconsumptionisthen reducedby about2mA closetothesensitivitylimit.The sensitivityistypicallyreducedto-100dBm. (7) MDMCFG2.DEM_DCFILT_OFF = 1 cannotbe used fordatarates≥ 250kBaud. (8) See Figure24 forblockingperformanceatotheroffsetfrequencies. (9) See Figure25 forblockingperformanceatotheroffsetfrequencies. Copyright© 2009–2010,Texas InstrumentsIncorporated SubmitDocumentationFeedback 77

-20 -10 -40 -30 -20 -10 0 10 20 30 40 Offs e t [M H z] Blocking [dB] -10 Offs e t [M H z] Selectivity [dB] -20 -10 -40 -30 -20 -10 0 10 20 30 40 Offs e t [M H z] Blocking [dB] -20 -10 Offs e t [M H z] Selectivity [dB] ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailableCC430F613x CC430F612x CC430F513x SLAS554D –MAY 2009–REVISED JULY 2010 www.ti.com NOTE: 868.3MHz, 2-FSK,5.2-kHzdeviation,IFfrequencyis152.3kHz,digitalchannelfilterbandwidthis58 kHz Figure22. TypicalSelectivityat1.2-kBaudData Rate NOTE: 868 MHz, 2-FSK,20 kHz deviation,IFfrequencyis152.3kHz,digitalchannelfilterbandwidthis100 kHz Figure23. TypicalSelectivityat38.4-kBaudData Rate

78 SubmitDocumentationFeedback Copyright© 2009–2010,Texas InstrumentsIncorporated

-20 -10 -40 -30 -20 -10 0 10 20 30 40 Offs e t [M H z] Blocking [dB] -20 -10 -3 -2 -1 0 1 2 3 Offs e t [M H z] Selectivity [dB] -20 -10 -40 -30 -20 -10 0 10 20 30 40 Offs e t [M H z] Blocking [dB] -20 -10 -3 -2 -1 0 1 2 3 Offs e t [M H z] Selectivity [dB] ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailable CC430F613x CC430F612x CC430F513x www.ti.com SLAS554D –MAY 2009–REVISED JULY 2010 NOTE: 868 MHz, 2-FSK,IFfrequencyis304 kHz,digitalchannelfilterbandwidthis540 kHz Figure24. TypicalSelectivityat250-kBaud Data Rate NOTE: 868 MHz, 2-FSK,IFfrequencyis355 kHz,digitalchannelfilterbandwidthis812 kHz Figure25. TypicalSelectivityat500-kBaud Data Rate Copyright© 2009–2010,Texas InstrumentsIncorporated SubmitDocumentationFeedback 79

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailableCC430F613x CC430F612x CC430F513x SLAS554D –MAY 2009–REVISED JULY 2010 www.ti.com TypicalSensitivity,315 MHz, SensitivityOptimizedSetting VCC 2.0V 3.0V 3.6V PARAMETER DATA RATE (kBaud) UNIT TA -40°C 25°C 85°C -40°C 25°C 85°C -40°C 25°C 85°C 1.2 -112 -112 -110 -112 -111 -109 -112 -111 -108 Sensitivity, 38.4 -105 -105 -104 -105 -103 -102 -105 -104 -102 dBm315MHz 250 -95 -95 -92 -94 -95 -92 -95 -94 -91 TypicalSensitivity,433 MHz, SensitivityOptimizedSetting VCC 2.0V 3.0V 3.6V PARAMETER DATA RATE (kBaud) UNIT TA -40°C 25°C 85°C -40°C 25°C 85°C -40°C 25°C 85°C 1.2 -111 -110 -108 -111 -111 -108 -111 -110 -107 Sensitivity, 38.4 -104 -104 -101 -104 -104 -101 -104 -103 -101 dBm433MHz 250 -93 -94 -91 -93 -93 -90 -93 -93 -90 TypicalSensitivity,868 MHz, SensitivityOptimizedSetting VCC 2.0V 3.0V 3.6V PARAMETER DATA RATE (kBaud) UNIT TA -40°C 25°C 85°C -40°C 25°C 85°C -40°C 25°C 85°C 1.2 -109 -109 -107 -109 -109 -106 -109 -108 -106 38.4 -102 -102 -100 -102 -102 -99 -102 -101 -99Sensitivity, dBm868MHz 250 -90 -90 -88 -89 -90 -87 -89 -90 -87 500 -84 -84 -81 -84 -84 -80 -84 -84 -80 TypicalSensitivity,915 MHz, SensitivityOptimizedSetting VCC 2.0V 3.0V 3.6V PARAMETER DATA RATE (kBaud) UNIT TA -40°C 25°C 85°C -40°C 25°C 85°C -40°C 25°C 85°C 1.2 -109 -109 -107 -109 -109 -106 -109 -108 -105 38.4 -102 -102 -100 -102 -102 -99 -103 -102 -99Sensitivity, dBm915MHz 250 -92 -92 -89 -92 -92 -88 -92 -92 -88 500 -87 -86 -81 -86 -86 -81 -86 -85 -80

80 SubmitDocumentationFeedback Copyright© 2009–2010,Texas InstrumentsIncorporated

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailable CC430F613x CC430F612x CC430F513x www.ti.com SLAS554D –MAY 2009–REVISED JULY 2010 RF Transmit TA = 25°C, VCC = 3 V (unlessotherwisenoted)(1) PTX = +10 dBm (unlessotherwisenoted) FREQUENCYPARAMETER TEST CONDITIONS MIN TYP MAX UNIT(MHz) 315 122 + j31 Differentialload 433 116 + j41 Ωimpedance(2) 868/915 86.5+ j43 315 +12 433 +13Outputpower,highest Deliveredtoa 50Ω single-endedloadviaCC430 dBmsetting(3) referencedesign's RF matchingnetwork868 +11 915 +11 Outputpower,lowest Deliveredtoa 50Ω single-endedloadviaCC430 -30 dBmsetting(3) referencedesign's RF matchingnetwork Second harmonic -56 433 Thirdharmonic -57 Second harmonic -50Harmonics, 868 dBmradiated(4)(5)(6) Thirdharmonic -52 Second harmonic -50 915 Thirdharmonic -54 Frequenciesbelow960 MHz < -38 315 +10 dBm CW Frequenciesabove 960 MHz < -48 Frequenciesbelow1 GHz -45 433 +10 dBm CW Frequenciesabove 1 GHz < -48 Harmonics,conducted dBm Second harmonic -59 868 +10 dBm CW Otherharmonics < -71 Second harmonic -53 915 +11 dBm CW (7) Otherharmonics < -47 Frequenciesbelow960 MHz < -58 315 +10 dBm CW Frequenciesabove 960 MHz < -53 Frequenciesbelow1 GHz < -54 Frequenciesabove 1 GHz < -54433 +10 dBm CW Frequencieswithin47 to74,87.5to < -63Spuriousemissions, 118,174 to230,470 to862 MHz conducted,harmonics dBm Frequenciesbelow1 GHz < -46notincluded(8) Frequenciesabove 1 GHz < -59868 +10 dBm CW Frequencieswithin47 to74,87.5to < -56118,174 to230,470 to862 MHz Frequenciesbelow960 MHz < -49 915 +11 dBm CW Frequenciesabove 960 MHz < -63 (1) Allmeasurement resultsareobtainedusingtheEM430F6137RF900 withBOM accordingtotestedfrequencyrange(seeTable46). (2) Differentialimpedance as seen fromtheRF-port(RF_P and RF_N) towardstheantenna.FollowtheCC430 referencedesignsavailable fromtheTIwebsite. (3) Outputpower isprogrammable,and fullrangeisavailableinallfrequencybands.Outputpower may be restrictedby regulatorylimits. See alsoApplicationNote AN050 UsingtheCC1101 intheEuropean 868MHz SRD Band,literaturenumber SWRA146 and Design Note DN013 Programming OutputPower on CC1101 ,literaturenumber SWRA168 ,whichgivestheoutputpower and harmonicswhen usingmulti-layerinductors.The outputpower isthentypically+10 dBm when operatingat868/915MHz. (4) The antennasused duringtheradiatedmeasurements (SMAFF-433 fromR.W.Badlandand Nearson S331 868/915)playa partin attenuatingtheharmonics. (5) Measured on EM430F6137RF900 withCW, maximum outputpower (6) Allharmonicsarebelow-41.2dBm when operatinginthe902 – 928 MHz band. (7) Requirementis-20dBc underFCC 15.247 (8) AllradiatedspuriousemissionsarewithinthelimitsofETSI.Alsosee DesignNote DN017 CC11xx 868/915MHz RF Matching,literature number SWRA168 . Copyright© 2009–2010,Texas InstrumentsIncorporated SubmitDocumentationFeedback 81

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailableCC430F613x CC430F612x CC430F513x SLAS554D –MAY 2009–REVISED JULY 2010 www.ti.com RF Transmit(continued) TA = 25°C, VCC = 3 V (unlessotherwisenoted)(1) PTX = +10 dBm (unlessotherwisenoted) FREQUENCYPARAMETER TEST CONDITIONS MIN TYP MAX UNIT(MHz) TX latency(9) Serialoperation 8 bits (9) Time fromsamplingthedataon thetransmitterdatainputpinuntilitisobservedon theRF outputports Optimum PATABLE SettingsforVariousOutput Power Levelsand Frequency Bands TA = 25°C, VCC = 3 V (unlessotherwisenoted)(1) PATABLE Setting Output Power [dBm]

315 MHz 433 MHz 868 MHz 915 MHz

-30 0x12 0x05 0x03 0x03 -12 0x33 0x26 0x25 0x25 -6 0x29 0x2D 0x2D 0x2D 0 0x51 0x50 0x8D 0x8D 10 0xC4 0xC4 0xC3 0xC3 max. 0xC0 0xC0 0xC0 0xC0 (1) Allmeasurement resultsareobtainedusingtheEM430F6137RF900 withBOM accordingtotestedfrequencyrange(seeTable46).

82 SubmitDocumentationFeedback Copyright© 2009–2010,Texas InstrumentsIncorporated

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailable CC430F613x CC430F612x CC430F513x www.ti.com SLAS554D –MAY 2009–REVISED JULY 2010 TypicalOutput Power, 315 MHz (1) VCC 2.0V 3.0V 3.6V PARAMETER PATABLE Setting UNIT TA -40°C 25°C 85°C -40°C 25°C 85°C -40°C 25°C 85°C 0xC0 (max) 11.9 11.8 11.8 0xC4 (10dBm) 10.3 10.3 10.3 Outputpower, 0xC6 (default) 9.3 dBm315MHz 0x51 (0dBm) 0.7 0.6 0.7 (1) Allmeasurement resultsareobtainedusingtheEM430F6137RF900 withBOM accordingtotestedfrequencyrange(seeTable46). TypicalOutput Power, 433 MHz (1) VCC 2.0V 3.0V 3.6V PARAMETER PATABLE Setting UNIT TA -40°C 25°C 85°C -40°C 25°C 85°C -40°C 25°C 85°C 0xC0 (max) 12.6 12.6 12.6 0xC4 (10dBm) 10.3 10.2 10.2 Outputpower, 0xC6 (default) 10.0 dBm433MHz 0x50 (0dBm) 0.3 0.3 0.3 (1) Allmeasurement resultsareobtainedusingtheEM430F6137RF900 withBOM accordingtotestedfrequencyrange(seeTable46). TypicalOutput Power, 868 MHz (1) VCC 2.0V 3.0V 3.6V PARAMETER PATABLE Setting UNIT TA -40°C 25°C 85°C -40°C 25°C 85°C -40°C 25°C 85°C Outputpower, 0xC6 (default) 8.8 dBm868MHz (1) Allmeasurement resultsareobtainedusingtheEM430F6137RF900 withBOM accordingtotestedfrequencyrange(seeTable46). TypicalOutput Power, 915 MHz (1) VCC 2.0V 3.0V 3.6V PARAMETER PATABLE Setting UNIT TA -40°C 25°C 85°C -40°C 25°C 85°C -40°C 25°C 85°C Outputpower, 0xC6 (default) 8.8 dBm915MHz (1) Allmeasurement resultsareobtainedusingtheEM430F6137RF900 withBOM accordingtotestedfrequencyrange(seeTable46). Copyright© 2009–2010,Texas InstrumentsIncorporated SubmitDocumentationFeedback 83

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailableCC430F613x CC430F612x CC430F513x SLAS554D –MAY 2009–REVISED JULY 2010 www.ti.com Frequency SynthesizerCharacteristics TA = 25°C, VCC = 3 V (unlessotherwisenoted)(1) MIN figuresaregivenusinga 27MHz crystal.TYP and MAX figuresaregivenusinga 26MHz crystal. PARAMETER TEST CONDITIONS MIN TYP MAX UNIT Programmed frequencyresolution(2) 26 to27 MHz crystal 397 fXOSC /216 412 Hz Synthesizerfrequencytolerance(3) ±40 ppm 50 kHz offsetfromcarrier –95 100 kHz offsetfromcarrier –94 200 kHz offsetfromcarrier –94 500 kHz offsetfromcarrier –98 RF carrierphase noise dBc/Hz

1 MHz offsetfromcarrier –107

2 MHz offsetfromcarrier –112

5 MHz offsetfromcarrier –118

10 MHz offsetfromcarrier –129

PLL turn-on/hop time(4) Crystaloscillatorrunning 85.1 88.4 88.4 µs PLL RX/TX settlingtime(5) 9.3 9.6 9.6 µs PLL TX/RX settlingtime(6) 20.7 21.5 21.5 µs PLL calibrationtime(7) 694 721 721 µs (1) Allmeasurement resultsareobtainedusingtheEM430F6137RF900 withBOM accordingtotestedfrequencyrange(seeTable46). (2) The resolution(inHz) isequalforallfrequencybands. (3) Depends on crystalused.Requiredaccuracy(includingtemperatureand aging)depends on frequencyband and channelbandwidth/ spacing. (4) Time fromleavingtheIDLE stateuntilarrivingintheRX, FSTXON orTX state,when notperformingcalibration. (5) Settlingtimeforthe1-IFfrequencystepfromRX toTX (6) Settlingtimeforthe1-IFfrequencystepfromTX toRX (7) Calibrationcan be initiatedmanuallyorautomaticallybeforeenteringorafterleavingRX/TX

84 SubmitDocumentationFeedback Copyright© 2009–2010,Texas InstrumentsIncorporated

-120 -100 -80 -60 -40 -20 -120 -100 -80 -60 -40 -20 0 Input Pow e r [dB m ] RSSI Readout [dBm] 1.2k B aud 38.4k B aud -120 -100 -80 -60 -40 -20 -120 -100 -80 -60 -40 -20 0 Input Pow e r [dB m ] RSSI Readout [dBm] 250k B aud 500k B aud ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailable CC430F613x CC430F612x CC430F513x www.ti.com SLAS554D –MAY 2009–REVISED JULY 2010 TypicalRSSI_offsetValues TA = 25°C, VCC = 3 V (unlessotherwisenoted)(1) RSSI_OFFSET (dB) DATA RATE (kBaud)

433 MHz 868 MHz

1.2 74 74 38.4 74 74 250 74 74 500 74 74 (1) Allmeasurement resultsareobtainedusingtheEM430F6137RF900 withBOM accordingtotestedfrequencyrange(seeTable46). Figure26. TypicalRSSI Value vs InputPower LevelforDifferentData Rates at868 MHz Copyright© 2009–2010,Texas InstrumentsIncorporated SubmitDocumentationFeedback 85

RF_N RF_P AVCC_RFAVCC_RFAVCC_RFAVCC_RFGUARD C7C3 C23 C29 C28 C27 C24C25 C26 SMA STRAIGHT JACK, SMT R_BIAS 26MHz C22 C21 RF_XOUT RF_XIN VDD DVCC VDD C11 C10 C19 DVCCVCORE TDOTDI/TCLKTMS (JTAG / SBW signals) AVDD C16 C17 C18 VDD C14 C15 R2 C20 DVCC nRST/NMI/SBWTDIO TCK TEST/SBWTCK AVDD C12 C13 AVCC AVSS (May be added close to the respective pinsto reduce emissions at 5GHz to levelsrequired by ETSI.) CC430F61xx 1764 1863 1962 2061 2160 2259 2952 3051 3150 3249 2358 2457 2556 2655 2754 2853 ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailableCC430F613x CC430F612x CC430F513x SLAS554D –MAY 2009–REVISED JULY 2010 www.ti.com APPLICATION CIRCUIT Fora completereferencedesignincludinglayoutsee theCC430 WirelessDevelopmentToolsand related documentation. Figure27. TypicalApplicationCircuitCC430F61xx

86 SubmitDocumentationFeedback Copyright© 2009–2010,Texas InstrumentsIncorporated

RF_NRF_P AVCC_RFAVCC_RFAVCC_RFAVCC_RFGUARD C7C3 C23 C29 C28 C27 C24C25 C26 SMA STRAIGHT JACK, SMT R_BIAS 26MHz C22 C21 RF_XOUT RF_XIN VDD DVCC VDD C11 C10 C19 DVCCVCORE TDOTDI/TCLK (JTAG / SBW signals) AVDD C16 C17 C18 VDD C14 C15 R2 C20 DVCC nRST/NMI/SBWTDIO TCK TEST/SBWTCK AVDD C12 C13 AVCC TMS AVSS 12114321 1098765 13 14 15 16 17 18 21 22 24252627282930313233343536 47 46 45 44 43 40 39 CC430F513x (May be added close to the respective pinsto reduce emissions at 5GHz to levelsrequired by ETSI.) ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailable CC430F613x CC430F612x CC430F513x www.ti.com SLAS554D –MAY 2009–REVISED JULY 2010 Fora completereferencedesignincludinglayoutsee theCC430 WirelessDevelopmentToolsand related documentation. Figure28. TypicalApplicationCircuitCC430F51xx Copyright© 2009–2010,Texas InstrumentsIncorporated SubmitDocumentationFeedback 87

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailableCC430F613x CC430F612x CC430F513x SLAS554D –MAY 2009–REVISED JULY 2010 www.ti.com Table46.BillofMaterials Component(s) for315 MHz for433 MHz for868/915MHz Comment C1,3,4,5,7,9,11,13,15 100 nF Decouplingcapacitors C8,10,12,14 10 µF Decouplingcapacitors C2,6,16,17,18 2 pF Decouplingcapacitors C19 470 nF VCORE capacitor RST decouplingcapC20 2.2nF (optimizedforSBW) Load capacitorsforC21,22 27 pF 26 MHz crystal(1) R1 56 kΩ R_BIAS (±1% required) R2 47kΩ RST pullup L1,2 Capacitors:220 pF 0.016µH 0.012µH L3,4 0.033µH 0.027µH 0.018µH L5 0.033µH 0.047µH 0.015µH L6 dnp(2) dnp(2) 0.0022µH L7 0.033µH 0.051µH 0.015µH C23 dnp(2) 2.7pF 1 pF C24 220 pF 220 pF 100 pF C25 6.8pF 3.9pF 1.5pF C26 6.8pF 3.9pF 1.5pF C27 220 pF 220 pF 1.5pF C28 10 pF 4.7pF 8.2pF C29 220 pF 220 pF 1.5pF (1) The loadcapacitanceC L seen by thecrystalisC L = 1/((1/C21)+(1/C22))+ C parasitic.The parasiticcapacitanceC parasiticincludespin capacitanceand PCB straycapacitance.Itcan be typicallyestimatedtobe around2.5pF. (2) dnp:do notpopulate.

88 SubmitDocumentationFeedback Copyright© 2009–2010,Texas InstrumentsIncorporated

P1.0/P1MAP0(/S18) P1.1/P1MAP1(/S19) P1.2/P1MAP2(/S20) P1.3/P1MAP3(/S21) P1.4/P1MAP4(/S22) Direction 0:□Input 1:□Output P1SEL.x 0P1DIR.x P1IN.x P1IRQ.x EN to□Port□Mapping from□Port□Mapping P1OUT .x Interrupt Select Edge Q EN Set P1 .SEL x P1IES□x . P1IFG.x P1IE.x 0DVSS DVCC P1DS.x 0:□Low□drive 1:□High□drive D from□Port□Mapping S18...S22 LCDS18...LCDS22 Pad□Logic P1REN.x P1MAP .x□=□PMAP_ANALOG Bus Keeper (n/a□□CC430F513x) ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailable CC430F613x CC430F612x CC430F513x www.ti.com SLAS554D –MAY 2009–REVISED JULY 2010 INPUT/OUTPUT SCHEMATICS PortP1,P1.0toP1.4,Input/OutputWith SchmittTrigger CC430F513x devicesdon'tprovideLCD functionalityon portP1 pins. Copyright© 2009–2010,Texas InstrumentsIncorporated SubmitDocumentationFeedback 89

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailableCC430F613x CC430F612x CC430F513x SLAS554D –MAY 2009–REVISED JULY 2010 www.ti.com Table47.PortP1 (P1.0toP1.4)Pin Functions CONTROL BITS/SIGNALS P1.0/P1MAP/S18 0 P1.0(I/O) I:0;O: 1 0 X 0 Mapped secondarydigitalfunction-see Table7 0;1(2) 1 ≤ 30(2) 0 Outputdriverand inputSchmitttriggerdisabled X 1 = 31 0 S18 (notavailableon CC430F513x) X X X 1 P1.1/P1MAP1/S19 1 P1.1(I/O) I:0;O: 1 0 X 0 Mapped secondarydigitalfunction-see Table7 0;1(2) 1 ≤ 30(2) 0 Outputdriverand inputSchmitttriggerdisabled X 1 = 31 0 S19 (notavailableon CC430F513x) X X X 1 P1.2/P1MAP2/S20 2 P1.2(I/O) I:0;O: 1 0 X 0 Mapped secondarydigitalfunction-see Table7 0;1(2) 1 ≤ 30(2) 0 Outputdriverand inputSchmitttriggerdisabled X 1 = 31 0 S22 (notavailableon CC430F513x) X X X 1 P1.3/P1MAP3/S21 3 P1.3(I/O) I:0;O: 1 0 X 0 Mapped secondarydigitalfunction-see Table7 0;1(2) 1 ≤ 30(2) 0 Outputdriverand inputSchmitttriggerdisabled X 1 = 31 0 S21 (notavailableon CC430F513x) X X X 1 P1.4/P1MAP4/S22 4 P1.4(I/O) I:0;O: 1 0 X 0 Mapped secondarydigitalfunction-see Table7 0;1(2) 1 ≤ 30(2) 0 Outputdriverand inputSchmitttriggerdisabled X 1 = 31 0 S22 (notavailableon CC430F513x) X X X 1 (1) LCDSx notavailableinCC430F513x. (2) Accordingtomapped function-see Table7.

90 SubmitDocumentationFeedback Copyright© 2009–2010,Texas InstrumentsIncorporated

P1.5/P1MAP5(/R23) P1.6/P1MAP6(/R13) P1.7/P1MAP7(/R03) P1SEL.x 0P1DIR.x P1IN.x P1IRQ.x EN to Port Mapping from Port Mapping P1OUT .x Interrupt Edge Select Q EN Set P1SEL.x P1IES.x P1IFG.x P1IE.x 0DVSS DVCC P1DS.x 0: Low drive 1: High drive D from Port Mapping to LCD_B Pad Logic Bus Keeper Direction 0: Input 1: Output P1REN.x P1MAP .x = PMAP_ANALOG (n/a CC430F513x) ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailable CC430F613x CC430F612x CC430F513x www.ti.com SLAS554D –MAY 2009–REVISED JULY 2010 PortP1,P1.5toP1.7,Input/OutputWith SchmittTrigger CC430F513x devicesdon'tprovideLCD functionalityon portP1 pins. Table48.PortP1 (P1.5toP1.7)Pin Functions CONTROL BITS/SIGNALS PIN NAME (P1.x) x FUNCTION P1DIR.x P1SEL.x P1MAPx P1.5/P1MAP5/R23 5 P1.5(I/O) I:0;O: 1 0 X Mapped secondarydigitalfunction-see Table7 0;1(1) 1 ≤ 30(1) R23 (2)(notavailableon CC430F513x) X 1 = 31 P1.6/P1MAP6/R13/ 6 P1.6(I/O) I:0;O: 1 0 X LCDREF Mapped secondarydigitalfunction-see Table7 0;1(1) 1 ≤ 30(1) R13/LCDREF (2)(notavailableon CC430F513x) X 1 = 31 P1.7/P1MAP7/R03 7 P1.7(I/O) I:0;O: 1 0 X Mapped secondarydigitalfunction-see Table7 0;1(1) 1 ≤ 30(1) R03 (2)(notavailableon CC430F513x) X 1 = 31 (1) Accordingtomapped function-see Table7. (2) SettingP1SEL.x bittogetherwithP1MAPx = PM_ANALOG disablestheoutputdriveras wellas theinputSchmitttrigger. Copyright© 2009–2010,Texas InstrumentsIncorporated SubmitDocumentationFeedback 91

P2.0/P2MAP0/CB0(/A0) P2.1/P2MAP2/CB1(/A1) P2.2/P2MAP2/CB2(/A2) P2.3/P2MAP3/CB3(/A3) Direction 0:□Input 1:□Output P2SEL.x 0P2DIR.x P2IN.x P2IRQ.x EN to□Port□Mapping from□Port□Mapping P2OUT .x Interrupt Select Edge Q EN Set P2 .SEL x P2IES□x . P2IFG.x P2IE.x 0DVSS DVCC P2DS.x 0:□Low□drive 1:□High□drive D from□Port□Mapping To□Comparator_B from□Comparator_B Pad□Logic To□ADC12 INCHx□=□x (n/a□□CC430F612x) CBPD.x P2REN.x P2MAP .x□=□PMAP_ANALOG Bus Keeper ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailableCC430F613x CC430F612x CC430F513x SLAS554D –MAY 2009–REVISED JULY 2010 www.ti.com PortP2,P2.0toP2.3,Input/OutputWith SchmittTrigger

92 SubmitDocumentationFeedback Copyright© 2009–2010,Texas InstrumentsIncorporated

P2.4/P2MAP4/CB4(/A4/VREF-/VeREF-) P2.5/P2MAP5/CB5(/A5/VREF+/VeRF+) P2SEL.x 0P2DIR.x P2IN.x P2IRQ.x EN to□Port□Mapping from□Port□Mapping P2OUT .x Interrupt Select Edge Q EN Set P2 .SEL x P2IES□x . P2IFG.x P2IE.x 0DVSS DVCC P2DS.x 0:□Low□drive 1:□High□drive D from□Port□Mapping To□Comparator_B from□Comparator_B Pad□Logic To□ADC12 INCHx□=□x (n/a□□CC430F612x) Bus Keeper to/from□Reference (n/a□□CC430F612x) Direction 0:□Input 1:□Output CBPD.x P2REN.x P2MAP .x□=□PMAP_ANALOG ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailable CC430F613x CC430F612x CC430F513x www.ti.com SLAS554D –MAY 2009–REVISED JULY 2010 PortP2,P2.4toP2.5,Input/OutputWith SchmittTrigger Copyright© 2009–2010,Texas InstrumentsIncorporated SubmitDocumentationFeedback 93

P2.6/P2MAP6(/CB6/A6) P2.7/P2MAP7(/CB7/A7) Direction 0:□Input 1:□Output P2SEL.x 0P2DIR.x P2IN.x P2IRQ.x EN to□Port□Mapping from□Port□Mapping P2OUT .x Interrupt Select Edge Q EN Set P2 .SEL x P2IES□x . P2IFG.x P2IE.x 0DVSS DVCC P2DS.x 0:□Low□drive 1:□High□drive D from□Port□Mapping To□Comparator_B from□Comparator_B Pad□Logic To□ADC12 INCHx□=□x (n/a□□CC430F513x) (n/a□□CC430F513x) (n/a□□CC430F513x) CBPD.x P2REN.x P2MAP .x□=□PMAP_ANALOG Bus Keeper ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailableCC430F613x CC430F612x CC430F513x SLAS554D –MAY 2009–REVISED JULY 2010 www.ti.com PortP2,P2.6and P2.7,Input/OutputWith SchmittTrigger CC430F513x devicesdon'tprovideanalogfunctionalityon portP2.6and P2.7pins.

94 SubmitDocumentationFeedback Copyright© 2009–2010,Texas InstrumentsIncorporated

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailable CC430F613x CC430F612x CC430F513x www.ti.com SLAS554D –MAY 2009–REVISED JULY 2010 Table49.PortP2 (P2.0toP2.7)Pin Functions CONTROL BITS/SIGNALS PIN NAME (P2.x) x FUNCTION P2DIR.x P2SEL.x P2MAPx CBPD.x P2.0/P2MAP0/CB0 0 P2.0(I/O) I:0;O: 1 0 X 0 (/A0) Mapped secondarydigitalfunction-see Table7 0;1(1) 1 ≤ 30(1) 0 A0 (notavailableon CC430F612x) (2) X 1 = 31 X CB0 (3) X X X 1 P2.1/P2MAP1/CB1 1 P2.1(I/O) I:0;O: 1 0 X 0 (/A1) Mapped secondarydigitalfunction-see Table7 0;1(1) 1 ≤ 30(1) 0 A1 (notavailableon CC430F612x) (2) X 1 = 31 X CB1 (3) X X X 1 P2.2/P2MAP2/CB2 2 P2.2(I/O) I:0;O: 1 0 X 0 (/A2) Mapped secondarydigitalfunction-see Table7 0;1(1) 1 ≤ 30(1) 0 A2 (notavailableon CC430F612x) (2) X 1 = 31 X CB2 (3) X X X 1 P2.3/P2MAP3/CB3 3 P2.3(I/O) I:0;O: 1 0 X 0 (/A3) Mapped secondarydigitalfunction-see Table7 0;1(1) 1 ≤ 30(1) 0 A3 (notavailableon CC430F612x) (2) X 1 = 31 X CB3 (3) X X X 1 P2.4/P2MAP4/CB4 4 P2.4(I/O) I:0;O: 1 0 X 0 (/A4/VREF-/VeREF-) Mapped secondarydigitalfunction-see Table7 0;1(1) 1 ≤ 30(1) 0 A4/VREF-/VeREF- (notavailableon CC430F612x) (2) X 1 = 31 X CB4 (3) X X X 1 P2.5/P2MAP5/CB5 5 P2.5(I/O) I:0;O: 1 0 X 0 (/A5/VREF+/VeREF+) Mapped secondarydigitalfunction-see Table7 0;1(1) 1 ≤ 30(1) 0 A5/VREF+/VeREF+ (notavailableon CC430F612x) (2) X 1 = 31 X CB5 (3) X X X 1 P2.6/P2MAP6(/CB6) 6 P2.6(I/O) I:0;O: 1 0 X 0 (/A6) Mapped secondarydigitalfunction-see Table7 0;1(1) 1 ≤ 30(1) 0 A6 (notavailableon CC430F612x and X 1 = 31 XCC430F513x) (2) CB6 (notavailableon CC430F513x) (3) X X X 1 P2.7/P2MAP7(/CB7) 7 P2.7(I/O) I:0;O: 1 0 X 0 (/A7) Mapped secondarydigitalfunction-see Table7 0;1(1) 1 ≤ 30(1) 0 A7 (notavailableon CC430F612x and X 1 = 31 XCC430F513x) (2) CB7 (notavailableon CC430F513x) (3) X X X 1 (1) Accordingtomapped function-see Table7. (2) SettingP2SEL.x bittogetherwithP2MAPx = PM_ANALOG disablestheoutputdriveras wellas theinputSchmitttrigger. (3) SettingtheCBPD.x bitdisablestheoutputdriveras wellas theinputSchmitttriggertopreventparasiticcrosscurrentswhen applying analogsignals.SelectingtheCBx inputpintothecomparatormultiplexerwiththeCBx bitsautomaticallydisablesoutputdriverand input bufferforthatpin,regardlessofthestateoftheassociatedCBPD.x bit. Copyright© 2009–2010,Texas InstrumentsIncorporated SubmitDocumentationFeedback 95

P3.4/P3MAP4(/S14) P3.5/P3MAP5(/S15) P3.6/P3MAP6(/S16) P3.7/P3MAP7(/S17) P3.0/P3MAP0(/S10) P3.1/P3MAP1(/S11) P3.2/P3MAP2(/S12) P3.3/P3MAP3(/S13) Direction 0:□Input 1:□Output P3SEL.x 0P3DIR.x P3IN.x EN to□Port□Mapping from□Port□Mapping P3OUT .x 0DVSS DVCC P3DS.x 0:□Low□drive 1:□High□drive D from□Port□Mapping S10...S17 LCDS10...LCDS17 Pad□Logic P3REN.x P3MAP .x□=□PMAP_ANALOG Bus Keeper (n/a□□CC430F513x) ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailableCC430F613x CC430F612x CC430F513x SLAS554D –MAY 2009–REVISED JULY 2010 www.ti.com PortP3,P3.0toP3.7,Input/OutputWith SchmittTrigger CC430F513x devicesdon'tprovideLCD functionalityon portP3 pins.

96 SubmitDocumentationFeedback Copyright© 2009–2010,Texas InstrumentsIncorporated

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailable CC430F613x CC430F612x CC430F513x www.ti.com SLAS554D –MAY 2009–REVISED JULY 2010 Table50.PortP3 (P3.0toP3.7)Pin Functions CONTROL BITS/SIGNALS P3.0/P3MAP0/S10 0 P3.0(I/O) I:0;O: 1 0 X 0 Mapped secondarydigitalfunction-see Table7 0;1(2) 1 ≤ 30(2) 0 Outputdriverand inputSchmitttriggerdisabled X 1 = 31 0 S10 (notavailableon CC430F513x) X X X 1 P3.1/P3MAP1/S11 1 P3.1(I/O) I:0;O: 1 0 X 0 Mapped secondarydigitalfunction-see Table7 0;1(2) 1 ≤ 30(2) 0 Outputdriverand inputSchmitttriggerdisabled X 1 = 31 0 S11 (notavailableon CC430F513x) X X X 1 P3.2/P3MAP7/S12 2 P3.2(I/O) I:0;O: 1 0 X 0 Mapped secondarydigitalfunction-see Table7 0;1(2) 1 ≤ 30(2) 0 Outputdriverand inputSchmitttriggerdisabled X 1 = 31 0 S12 (notavailableon CC430F513x) X X X 1 P3.3/P3MAP3/S13 3 P3.3(I/O) I:0;O: 1 0 X 0 Mapped secondarydigitalfunction-see Table7 0;1(2) 1 ≤ 30(2) 0 Outputdriverand inputSchmitttriggerdisabled X 1 = 31 0 S13 (notavailableon CC430F513x) X X X 1 P3.4/P3MAP4/S14 4 P3.4(I/O) I:0;O: 1 0 X 0 Mapped secondarydigitalfunction-see Table7 0;1(2) 1 ≤ 30(2) 0 Outputdriverand inputSchmitttriggerdisabled X 1 = 31 0 S14 (notavailableon CC430F513x) X X X 1 P3.5/P3MAP5/S15 5 P3.5(I/O) I:0;O: 1 0 X 0 Mapped secondarydigitalfunction-see Table7 0;1(2) 1 ≤ 30(2) 0 Outputdriverand inputSchmitttriggerdisabled X 1 = 31 0 S15 (notavailableon CC430F513x) X X X 1 P3.6/P3MAP6/S16 6 P3.6(I/O) I:0;O: 1 0 X 0 Mapped secondarydigitalfunction-see Table7 0;1(2) 1 ≤ 30(2) 0 Outputdriverand inputSchmitttriggerdisabled X 1 = 31 0 S16 (notavailableon CC430F513x) X X X 1 P3.7/P3MAP7/S17 7 P3.7(I/O) I:0;O: 1 0 X 0 Mapped secondarydigitalfunction-see Table7 0;1(2) 1 ≤ 30(2) 0 Outputdriverand inputSchmitttriggerdisabled X 1 = 31 0 S17 (notavailableon CC430F513x) X X X 1 (1) LCDSx notavailableinCC430F513x. (2) Accordingtomapped function-see Table7. Copyright© 2009–2010,Texas InstrumentsIncorporated SubmitDocumentationFeedback 97

P4.4/S6 P4.5/S7 P4.6/S8 P4.7/S9 P4.0/S2 P4.1/S3 P4.2/S4 P4.3/S5 Direction 0:□Input 1:□Output P4SEL.x 0P4DIR.x P4IN.x EN Not□Used DVSS P4OUT .x 0DVSS DVCC P4DS.x 0:□Low□drive 1:□High□drive D S2...S9 LCDS2...LCDS9 Pad□Logic P4REN.x Bus Keeper ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailableCC430F613x CC430F612x CC430F513x SLAS554D –MAY 2009–REVISED JULY 2010 www.ti.com PortP4,P4.0toP4.7,Input/OutputWith SchmittTrigger(CC430F613x and CC430F612x only)

98 SubmitDocumentationFeedback Copyright© 2009–2010,Texas InstrumentsIncorporated

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailable CC430F613x CC430F612x CC430F513x www.ti.com SLAS554D –MAY 2009–REVISED JULY 2010 Table51.PortP4 (P4.0toP4.7)Pin Functions(CC430F613x and CC430F612x only) CONTROL BITS/SIGNALS PIN NAME (P4.x) x FUNCTION P4.0/P4MAP0/S2 0 P4.0(I/O) I:0;O: 1 0 0 N/A 0 1 0 DVSS 1 1 0 S2 X X 1 P4.1/P4MAP1/S3 1 P4.1(I/O) I:0;O: 1 0 0 N/A 0 1 0 DVSS 1 1 0 S3 X X 1 P4.2/P4MAP7/S4 2 P4.2(I/O) I:0;O: 1 0 0 N/A 0 1 0 DVSS 1 1 0 S4 X X 1 P4.3/P4MAP3/S5 3 P4.3(I/O) I:0;O: 1 0 0 N/A 0 1 0 DVSS 1 1 0 S5 X X 1 P4.4/P4MAP4/S6 4 P4.4(I/O) I:0;O: 1 0 0 N/A 0 1 0 DVSS 1 1 0 S6 X X 1 P4.5/P4MAP5/S7 5 P4.5(I/O) I:0;O: 1 0 0 N/A 0 1 0 DVSS 1 1 0 S7 X X 1 P4.6/P4MAP6/S8 6 P4.6(I/O) I:0;O: 1 0 0 N/A 0 1 0 DVSS 1 1 0 S8 X X 1 P4.7/P4MAP7/S9 7 P4.7(I/O) I:0;O: 1 0 0 N/A 0 1 0 DVSS 1 1 0 S9 X X 1 Copyright© 2009–2010,Texas InstrumentsIncorporated SubmitDocumentationFeedback 99

P5.0/XIN P5SEL.0 0P5DIR.0 P5IN.0 EN Module□X□IN Module□X□OUT P5OUT .0 0DVSS DVCC P5REN.0 Pad□Logic P5DS.x 0:□Low□drive 1:□High□drive D Bus Keeper to□XT1 ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailableCC430F613x CC430F612x CC430F513x SLAS554D –MAY 2009–REVISED JULY 2010 www.ti.com PortP5,P5.0,Input/OutputWith SchmittTrigger

100 SubmitDocumentationFeedback Copyright© 2009–2010,Texas InstrumentsIncorporated

P5.1/XOUTP5SEL.0 XT1BYPASS 0P5DIR.1 P5IN.1 EN Module□X□IN Module□X□OUT P5OUT .1 0DVSS DVCC P5REN.1 Pad□Logic P5DS.x 0:□Low□drive 1:□High□drive D Bus Keeper to□XT1 ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailable CC430F613x CC430F612x CC430F513x www.ti.com SLAS554D –MAY 2009–REVISED JULY 2010 PortP5,P5.1,Input/OutputWith SchmittTrigger Table52.PortP5 (P5.0and P5.1)Pin Functions CONTROL BITS/SIGNALS (1) PIN NAME (P5.x) x FUNCTION P5DIR.x P5SEL.0 P5SEL.1 XT1BYPASS P5.0/XIN 0 P5.0(I/O) I:0;O: 1 0 X X XIN crystalmode (2) X 1 X 0 XIN bypassmode (2) X 1 X 1 P5.1/XOUT 1 P5.1(I/O) I:0;O: 1 0 X X XOUT crystalmode (3) X 1 X 0 P5.1(I/O)(3) X 1 X 1 (1) X = Don 'tcare (2) SettingP5SEL.0 causesthegeneral-purposeI/Otobe disabled.PendingthesettingofXT1BYPASS, P5.0isconfiguredforcrystal mode orbypassmode. (3) SettingP5SEL.0 causesthegeneral-purposeI/Otobe disabledincrystalmode. When usingbypassmode, P5.1can be used as general-purposeI/O. Copyright© 2009–2010,Texas InstrumentsIncorporated SubmitDocumentationFeedback 101

P5.2/S0 P5.3/S1 P5.4/S23 P5SEL.x 0P5DIR.x P5IN.x EN Not Used DVSS P5OUT .x 0DVSS DVCC P5REN.x Pad Logic P5DS.x 0: Low drive 1: High drive D Bus Keeper LCDS0(P5.2)/LCDS1(P5.3)/LCDS23(P5.4) ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailableCC430F613x CC430F612x CC430F513x SLAS554D –MAY 2009–REVISED JULY 2010 www.ti.com PortP5,P5.2toP5.4,Input/OutputWith SchmittTrigger(CC430F613x and CC430F612x only) Table53.PortP5 (P5.2toP5.3)Pin Functions(CC430F613x and CC430F612x only) CONTROL BITS/SIGNALS PIN NAME (P5.x) x FUNCTION N/A 0 1 0 DVSS 1 1 0 S0 X X 1 N/A 0 1 0 DVSS 1 1 0 S1 X X 1 Table54.PortP5 (P5.4)Pin Functions(CC430F613x and CC430F612x only) CONTROL BITS/SIGNALS PIN NAME (P5.x) x FUNCTION P5DIR.x P5SEL.x LCDS23 N/A 0 1 0 DVSS 1 1 0 S23 X X 1

102 SubmitDocumentationFeedback Copyright© 2009–2010,Texas InstrumentsIncorporated

P5.5/COM3/S24 P5.6/COM2/S25 P5.7/COM1/S26 P5SEL.x P5DIR.x P5IN.x P5OUT .x 0DVSS DVCC P5REN.x Pad□Logic P5DS.x 0:□Low□drive 1:□High□drive Bus Keeper COM3(P5.5)/COM2(P5.6)/COM1(P5.7) LCDS24(P5.5)/LCDS25(P5.6)/LCDS26(P5.7) ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailable CC430F613x CC430F612x CC430F513x www.ti.com SLAS554D –MAY 2009–REVISED JULY 2010 PortP5,P5.5toP5.7,Input/OutputWith SchmittTrigger(CC430F613x and CC430F612x only) Table55.PortP5 (P5.5toP5.7)Pin Functions(CC430F613x and CC430F612x only) CONTROL BITS/SIGNALS PIN NAME (P5.x) x FUNCTION P5.5/COM3/S24 5 P5.5(I/O) I:0;O: 1 0 0 COM3 (1) X 1 X S24 (1) X 0 1 P5.6/COM2/S25 6 P5.6(I/O) I:0;O: 1 0 0 COM2 (1) X 1 X S25 (1) X 0 1 P5.7/COM1/S26 7 P5.7(I/O) I:0;O: 1 0 0 COM1 (1) X 1 X S26 (1) X 0 1 (1) SettingP5SEL.x bitdisablestheoutputdriveras wellas theinputSchmitttrigger. Copyright© 2009–2010,Texas InstrumentsIncorporated SubmitDocumentationFeedback 103

PJ.0/TDO From□JTAG 0PJDIR.0 PJIN.0 From□JTAG PJOUT .0 0DVSS DVCC PJREN.0 Pad□Logic PJDS.0 0:□Low□drive 1:□High□drive DVCC PJ.1/TDI/TCLK PJ.2/TMS PJ.3/TCK From□JTAG 0PJDIR.x PJIN.x EN From□JTAG PJOUT .x 0DVSS DVCC PJREN.x Pad□Logic PJDS.x 0:□Low□drive 1:□High□drive D DVSS To□JTAG ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailableCC430F613x CC430F612x CC430F513x SLAS554D –MAY 2009–REVISED JULY 2010 www.ti.com PortJ,J.0JTAG pinTDO, Input/OutputWith SchmittTriggeror Output PortJ,J.1toJ.3JTAG pinsTMS, TCK, TDI/TCLK,Input/OutputWith SchmittTriggeror Output

104 SubmitDocumentationFeedback Copyright© 2009–2010,Texas InstrumentsIncorporated

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailable CC430F613x CC430F612x CC430F513x www.ti.com SLAS554D –MAY 2009–REVISED JULY 2010 Table56.PortPJ (PJ.0toPJ.3)Pin Functions CONTROL BITS/ SIGNALS (1) PIN NAME (PJ.x) x FUNCTION PJDIR.x PJ.0/TDO 0 PJ.0(I/O)(2) I:0;O: 1 TDO (3) X PJ.1/TDI/TCLK 1 PJ.1(I/O)(2) I:0;O: 1 TDI/TCLK(3)(4) X PJ.2/TMS 2 PJ.2(I/O)(2) I:0;O: 1 TMS (3)(4) X PJ.3/TCK 3 PJ.3(I/O)(2) I:0;O: 1 TCK (3)(4) X (1) X = Don 'tcare (2) Defaultcondition (3) The pindirectioniscontrolledby theJTAG module. (4) InJTAG mode, pullupsareactivatedautomaticallyon TMS, TCK, and TDI/TCLK.PJREN.x aredo notcare. Copyright© 2009–2010,Texas InstrumentsIncorporated SubmitDocumentationFeedback 105

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailableCC430F613x CC430F612x CC430F513x SLAS554D –MAY 2009–REVISED JULY 2010 www.ti.com Device DescriptorStructures Table 57 liststhe contentof the device descriptortag-length-value(TLV) structureforCC430F613x and CC430F613x devicetypes. Table58 liststhecontentofthedevicedescriptortag-length-value(TLV)structureforCC430F612x devicetypes. Table57.Device DescriptorTable 'F6137 'F6135 'F5137 'F5135 'F5133SizeDescription Address bytes Value Value Value Value Value InfoBlock Infolength 01A00h 1 06h 06h 06h 06h 06h CRC length 01A01h 1 06h 06h 06h 06h 06h CRC value 01A02h 2 perunit perunit perunit perunit perunit DeviceID 01A04h 1 61h 61h 51h 51h 51h DeviceID 01A05h 1 37h 35h 37h 35h 33h Hardware revision 01A06h 1 10h 10h 10h 10h 10h Firmwarerevision 01A07h 1 10h 10h 10h 10h 10h Die Record DieRecord Tag 01A08h 1 08h 08h 08h 08h 08h DieRecord length 01A09h 1 0Ah 0Ah 0Ah 0Ah 0Ah Lot/WaferID 01A0Ah 4 perunit perunit perunit perunit perunit DieX position 01A0Eh 2 perunit perunit perunit perunit perunit DieY position 01A10h 2 perunit perunit perunit perunit perunit Testresults 01A12h 2 perunit perunit perunit perunit perunit ADC12 ADC12 Calibration01A14h 1 11h 11h 11h 11h 11hCalibration Tag ADC12 Calibration01A15h 1 10h 10h 10h 10h 10hlength ADC Gain Factor 01A16h 2 perunit perunit perunit perunit perunit ADC Offset 01A18h 2 perunit perunit perunit perunit perunit ADC 1.5V Reference 01A1Ah 2 perunit perunit perunit perunit perunitTemp. Sensor 30°C ADC 1.5V Reference 01A1Ch 2 perunit perunit perunit perunit perunitTemp. Sensor 85°C ADC 2.0V Reference 01A1Eh 2 perunit perunit perunit perunit perunitTemp. Sensor 30°C ADC 2.0V Reference 01A20h 2 perunit perunit perunit perunit perunitTemp. Sensor 85°C ADC 2.5V Reference 01A22h 2 perunit perunit perunit perunit perunitTemp. Sensor 30°C ADC 2.5V Reference 01A24h 2 perunit perunit perunit perunit perunitTemp. Sensor 85°C REF REF Calibration 01A26h 1 12h 12h 12h 12h 12hCalibration Tag REF Calibration 01A27h 1 06h 06h 06h 06h 06hlength

106 SubmitDocumentationFeedback Copyright© 2009–2010,Texas InstrumentsIncorporated

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailable CC430F613x CC430F612x CC430F513x www.ti.com SLAS554D –MAY 2009–REVISED JULY 2010 Table57.Device DescriptorTable(continued) 'F6137 'F6135 'F5137 'F5135 'F5133SizeDescription Address bytes Value Value Value Value Value 1.5VReference 01A28h 2 perunit perunit perunit perunit perunitFactor 2.0VReference 01A2Ah 2 perunit perunit perunit perunit perunitFactor 2.5VReference 01A2Ch 2 perunit perunit perunit perunit perunitFactor Peripheral Peripheral 01A2Eh 1 02h 02h 02h 02h 02hDescriptor DescriptorTag (PD) Peripheral 01A2Fh 1 57h 57h 55h 55h 55hDescriptorLength Table58.Device DescriptorTableCC430F612x 'F6127 'F6126 'F6125SizeDescription Address bytes Value Value Value InfoBlock Infolength 01A00h 1 06h 06h 06h CRC length 01A01h 1 06h 06h 06h CRC value 01A02h 2 perunit perunit perunit DeviceID 01A04h 1 61h 61h 61h DeviceID 01A05h 1 27h 26h 25h Hardware revision 01A06h 1 10h 10h 10h Firmwarerevision 01A07h 1 10h 10h 10h Die Record DieRecord Tag 01A08h 1 08h 08h 08h DieRecord length 01A09h 1 0Ah 0Ah 0Ah Lot/WaferID 01A0Ah 4 perunit perunit perunit DieX position 01A0Eh 2 perunit perunit perunit DieY position 01A10h 2 perunit perunit perunit Testresults 01A12h 2 perunit perunit perunit Empty Descriptor Empty Tag 01A14h 1 05h 05h 05h Empty Tag Length 01A15h 1 10h 10h 10h 01A16h 16 undefined undefined undefined REF Calibration REF CalibrationTag 01A26h 1 12h 12h 12h REF Calibrationlength 01A27h 1 06h 06h 06h 1.5VReferenceFactor 01A28h 2 perunit perunit perunit 2.0VReferenceFactor 01A2Ah 2 perunit perunit perunit 2.5VReferenceFactor 01A2Ch 2 perunit perunit perunit Peripheral PeripheralDescriptorTag 01A2Eh 1 02h 02h 02h Descriptor(PD) PeripheralDescriptor 01A2Fh 1 55h 55h 55hLength Copyright© 2009–2010,Texas InstrumentsIncorporated SubmitDocumentationFeedback 107

ECCN 5E002 TSPA -Technology/SoftwarePubliclyAvailableCC430F613x CC430F612x CC430F513x SLAS554D –MAY 2009–REVISED JULY 2010 www.ti.com

REVISION HISTORY

SLAS554 ProductPreviewdatasheetrelease SLAS554A ProductPreviewdatasheetupdatedwithelectricalparameters SLAS554B ProductionData releasedatasheetforCC430F51xx devices.CC430F61xx devicesareProductPreview. SLAS554C ProductionData releasedatasheetforCC430F61xx devices. Added correctterminationofLCDCAP/R33 ifnotused.SLAS554D CorrectedunitinFrequencySynthesizerCharacteristicsfrom"ms "to"µs".

108 SubmitDocumentationFeedback Copyright© 2009–2010,Texas InstrumentsIncorporated

www.ti.com 15-Jul-2010 Addendum-Page 1 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp (3) Samples (Requires Login) CC430F5133IRGZ ACTIVE VQFN RGZ 48 1000 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR Purchase Samples CC430F5133IRGZR ACTIVE VQFN RGZ 48 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR Purchase Samples CC430F5133IRGZT ACTIVE VQFN RGZ 48 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR Purchase Samples CC430F5135IRGZ ACTIVE VQFN RGZ 48 1000 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR Purchase Samples CC430F5135IRGZR ACTIVE VQFN RGZ 48 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR Purchase Samples CC430F5135IRGZT ACTIVE VQFN RGZ 48 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR Purchase Samples CC430F5137IRGZ ACTIVE VQFN RGZ 48 52 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR Purchase Samples CC430F5137IRGZR ACTIVE VQFN RGZ 48 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR Purchase Samples CC430F5137IRGZT ACTIVE VQFN RGZ 48 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR Purchase Samples CC430F6125IRGC ACTIVE VQFN RGC 64 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR Request Free Samples CC430F6125IRGCR ACTIVE VQFN RGC 64 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR Request Free Samples CC430F6125IRGCT ACTIVE VQFN RGC 64 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR Purchase Samples CC430F6126IRGC ACTIVE VQFN RGC 64 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR Request Free Samples CC430F6126IRGCR ACTIVE VQFN RGC 64 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR Purchase Samples CC430F6126IRGCT ACTIVE VQFN RGC 64 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR Purchase Samples CC430F6127IRGC ACTIVE VQFN RGC 64 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR Request Free Samples CC430F6127IRGCR ACTIVE VQFN RGC 64 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR Purchase Samples

www.ti.com 15-Jul-2010 Addendum-Page 2 Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp (3) Samples (Requires Login) CC430F6127IRGCT ACTIVE VQFN RGC 64 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR Purchase Samples CC430F6135IRGC ACTIVE VQFN RGC 64 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR Request Free Samples CC430F6135IRGCR ACTIVE VQFN RGC 64 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR Request Free Samples CC430F6135IRGCT ACTIVE VQFN RGC 64 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR Purchase Samples CC430F6137IRGC ACTIVE VQFN RGC 64 52 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR Request Free Samples CC430F6137IRGCR ACTIVE VQFN RGC 64 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR Purchase Samples CC430F6137IRGCT ACTIVE VQFN RGC 64 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HR Purchase Samples (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.

www.ti.com 15-Jul-2010 Addendum-Page 3 In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.

Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Amplifiers amplifier.ti.com Audio www.ti.com/audio Data Converters dataconverter.ti.com Automotive www.ti.com/automotive DLP® Products www.dlp.com Communications and www.ti.com/communications Telecom DSP dsp.ti.com Computers and www.ti.com/computers Peripherals Clocks and Timers www.ti.com/clocks Consumer Electronics www.ti.com/consumer-apps Interface interface.ti.com Energy www.ti.com/energy Logic logic.ti.com Industrial www.ti.com/industrial Power Mgmt power.ti.com Medical www.ti.com/medical Microcontrollers microcontroller.ti.com Security www.ti.com/security RFID www.ti-rfid.com Space, Avionics & www.ti.com/space-avionics-defense Defense RF/IF and ZigBee® Solutionswww.ti.com/lprf Video and Imaging www.ti.com/video Wireless www.ti.com/wireless-apps Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2010, Texas Instruments Incorporated