CC0402CFX7R0BB121

CC0201CRNPO0BN121 TDK | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 18

Technical content

Product Specification – December 9, 2016 V.18 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS Mid-voltage NP0/X7R

100 V TO 630 V

0.47 pF to 2.2 µF RoHS compliant & Halogen Free

www.yageo.com Dec. 9, 2016 V.18 Surface-Mount Ceramic Multilayer Capacitors Product specification ORDERING INFORMATION - GLOBAL PART NUMBER, PHYCOMP CTC & 12NC All part numbers are identified by the series, size, tolerance, TC material, packing style, voltage, process code, termination and capacitance value. YYAAGGEEOO BBRRAANNDD oorrddeerriinngg ccooddee GLOBAL PART NUMBER (PREFERRED ) CC XXXX X X XXX X B X XXX (1) SIZE – INCH BASED (METRIC) 0201 (0603) / 0402 (1005) / 0603 (1608) / 0805 (2012) / 1206 (3216) / 1210 (3225) 1808 (4520) / 1812 (4532) (2) TOLERANCE C = ± 0.25 pF D = ± 0.5 pF F = ± 1% G = ± 2% J = ± 5% K = ± 10% M = ± 20% (3) PACKING STYLE R = Paper/PE taping reel; Reel 7 inch K = Blister taping reel; Reel 7 inch P = Paper/PE taping reel; Reel 13 inch F = Blister taping reel; Reel 13 inch C = Bulk case (4) TC MATERIAL NPO X7R (5) RATED VOLTAGE 0 = 100 V A = 200 V Y = 250 V B = 500 V Z = 630 V (6) PROCESS N = NP0 B = Class 2 MLCC (7) CAPACITANCE VALUE 2 significant digits+number of zeros The 3rd digit signifies the multiplying factor, and letter R is decimal point Example: 121 = 12 x 101 = 120 pF SCOPE This specification describes Mid- voltage NP0/X7R series chip capacitors with lead -free terminations.

APPLICATIONS

PCs, Hard disk, Game PCs Power supplies LCD panel ADSL, Modem

FEATURES

Nickel -barrier end termination RoHS compliant Halogen Free compliant

www.yageo.com Dec. 9, 2016 V.18 Surface-Mount Ceramic Multilayer Capacitors Product specification CONSTRUCTION The capacitor consists of a rectangular block of ceramic dielectric in which a number of interleaved metal electrodes are contained. This structure gives rise to a high capacitance per unit volume. The inner electrodes are connected to the two end terminations and finally covered with a layer of plated tin (NiSn). The terminations are lead -free. A cross section of the structure is shown in F ig.1. Fig. 1 Surface mounted multilayer ceramic capacitor construction TYPE L1 (mm) W (mm) T (MM) L2 / L3 (mm) L4 (mm) min. max. min. 0201 0.6 ± 0.03 0.3± 0.03 Refer to table 2 to 13 0.10 0.20 0.20 Table 1 For outlines see fig. 2 DIMENSION OOUUTTLLIINNEESS For dimension see Table 1 Fig. 2 Surface mounted multilayer ceramic capacitor dimension

www.yageo.com Dec. 9, 2016 V.18 Surface-Mount Ceramic Multilayer Capacitors Product specification CAPACITANCE RANGE & THICKNESS FOR NP0 Table 2 Sizes from 0201 to 0805 CAP. 0201 0402 0603 0805 100V 100V 100 V 200 V 250 V 100 V 200 V 250 V 500 V 630V 0.22 pF 0.47 pF 0.56 pF 0.68 pF 0.82 pF 1.0 pF 1.2 pF 1.5 pF 1.8 pF 2.2 pF 2.7 pF 3.3 pF 3.9 pF 4.7 pF 5.6 pF 6.8 pF 8.2 pF 10 pF 12 pF 15 pF 18 pF 22 pF 27 pF 33 pF 39 pF 47 pF 56 pF 68 pF 82 pF 100 pF NOTE 1. Values in shaded cells indicate thickness class in mm 2. Capacitance value of non E-12 series is on request

www.yageo.com Dec. 9, 2016 V.18 Surface-Mount Ceramic Multilayer Capacitors Product specification CAPACITANCE RANGE & THICKNESS FOR NP0 Table 4 Sizes from 0603 to 0805 (continued) CAP. 0603 0805

100 V 200 V 250 V 100 V 200 V 250 V 500 V 630 V

0.8± 0.1 0.8± 0.1 0.8± 0.1 0.6± 0.1 180 pF 220 pF 270 pF 330 pF 390 pF 470 pF 560 pF 680 pF 820 pF 1.0 nF 1.2 nF 0.85± 0.1 1.5 nF 1.8 nF 2.2 nF 1.25± 0.2 2.7 nF 3.3 nF 3.9 nF 4.7 nF 5.6 nF 6.8 nF 8.2 nF 10 nF 12 nF 15 nF 18 nF 22 nF NOTE 1. Values in shaded cells indicate thickness class in mm 2. Capacitance value of non E-12 series is on request

www.yageo.com Dec. 9, 2016 V.18 Surface-Mount Ceramic Multilayer Capacitors Product specification CAPACITANCE RANGE & THICKNESS FOR NP0 CAP. 1206 1210

100 V 200 V 250 V 500 V 630 V 100 V 200 V 250 V 500 V 630 V

0.47 pF 0.56 pF 0.68 pF 0.82 pF 1.0 pF 1.2 pF 1.5 pF 1.8 pF 2.2 pF 2.7 pF 3.3 pF 3.9 pF 4.7 pF 5.6 pF 6.8 pF 8.2 pF 10 pF 0.6± 0.1 1.25± 0.2 12 pF 15 pF 18 pF 22 pF 27 pF 33 pF 1.25± 0.2 39 pF 47 pF 56 pF 68 pF 82 pF NOTE 1. Values in shaded cells indicate thickness class in mm 2. Capacitance value of non E-12 series is on request Table 5 Sizes from 1206 to 1210

www.yageo.com Dec. 9, 2016 V.18 Surface-Mount Ceramic Multilayer Capacitors Product specification CAPACITANCE RANGE & THICKNESS FOR NP0 Table 7 Sizes from 1206 to 1210 (continued) CAP. 1206 1210 0.6± 0.1 1.25± 0.2 1.25± 0.2 1.25± 0.2 120 pF 150 pF 180 pF 220 pF 270 pF 330 pF 390 pF 470 pF 560 pF 680 pF 820 pF 1.0 nF 1.2 nF 1.5 nF 1.8 nF 1.25± 0.2 2.2 nF 2.7 nF 3.3 nF 0.85± 0.1 3.9 nF 4.7 nF 5.6 nF 6.8 nF 8.2 nF 1.25± 0.2 10 nF 12 nF 15 nF 18 nF 22 nF NOTE 1. Values in shaded cells indicate thickness class in mm 2. Capacitance value of non E-12 series is on request

www.yageo.com Dec. 9, 2016 V.18 Surface-Mount Ceramic Multilayer Capacitors Product specification CAPACITANCE RANGE & THICKNESS FOR NP0 Table 8 Sizes 1812 CAP. 1812

100 V 200 V 250 V 500 V 630V

1.25± 0.2 1.25± 0.2 68 pF 82 pF 100 pF 120 pF 150 pF 180 pF 220 pF 270 pF 330 pF 1.25± 0.2 1.25± 0.2 1.25± 0.2 390 pF 470 pF 560 pF 680 pF 820 pF 1 nF 1.2 nF 1.5 nF 1.8 nF 2.2 nF 2.7 nF 3.3 nF 3.9 nF 4.7 nF 5.6 nF 6.8 nF 8.2 nF 10 nF 12 nF 15 nF 18 nF 22 nF NOTE 1. Values in shaded cells indicate thickness class in mm 2. Capacitance value of non E-12 series is on request

www.yageo.com Dec. 9, 2016 V.18 Surface-Mount Ceramic Multilayer Capacitors Product specification Table 10 Sizes from 0402 to 0805 CAPACITANCE RANGE & THICKNESS FOR X7R CAP. 0402 0603 0805

100 V 100 V 250 V 100 V 200 V 250 V 500 V 630 V

0.5± 0.05 0.8± 0.1 150 pF 220 pF 0.8± 0.1 0.6± 0.1 330 pF 470 pF 680 pF 1.0 nF 1.5 nF 2.2 nF 3.3 nF 4.7 nF 6.8 nF 10 nF 1.25± 0.2 1.25± 0.2 15 nF 0.85± 0.1 22 nF 33 nF 1.25± 0.2 47 nF 68 nF 100 nF 150 nF 220 nF 330 nF 470 nF NOTE 1. Values in shaded cells indicate thickness class in mm 2. Capacitance value of non E-6 series is on request 3. For special ordering code, please contact local sales force before order 4. For product with 5% tolerance, please contact local sales force before order

www.yageo.com Dec. 9, 2016 V.18 Surface-Mount Ceramic Multilayer Capacitors Product specification Table 11 Sizes from 1206 to 1210 CAPACITANCE RANGE & THICKNESS FOR X7R CAP. 1206 1210

100 V 200 V 250 V 500 V 630 V 100 V 200 V 250 V 500 V 630V

0.85± 0.1 1.25± 0.2 1.25± 0.2 330 pF 470 pF 680 pF 1.0 nF 1.5 nF 2.2 nF 0.85± 0.1 3.3 nF 1.25± 0.2 1.25± 0.2 4.7 nF 6.8 nF 10 nF 15 nF 22 nF 1.6± 0.2 33 nF 1.6± 0.2 47 nF 68 nF 1.25± 0.2 100 nF 1.6± 0.2 1.6± 0.2 150 nF 1.25± 0.2 220 nF 330 nF 1.6± 0.2 470 nF 680 nF 2.0± 0.2 1 µF 1.6± 0.2 2.2 µF NOTE 1. Values in shaded cells indicate thickness class in mm 2. Capacitance value of non E-6 series is on request 3. For product with 5% tolerance, please contact local sales force before order

www.yageo.com Dec. 9, 2016 V.18 Surface-Mount Ceramic Multilayer Capacitors Product specification Table 12 Sizes from 1808 to 1812 CAPACITANCE RANGE & THICKNESS FOR X7R CAP. 1808 1812

100 V 200 V 250 V 500 V 100 V 200 V 250 V 500 V 630 V

1.0 nF 0.85± 0.1 1.25± 0.2 1.35± 0.2 1.5 nF 2.2 nF 3.3 nF 1.25± 0.2 4.7 nF 6.8 nF 10 nF 15 nF 22 nF 33 nF 1.6± 0.2 47 nF 68 nF 100 nF 1.25± 0.2 1.6± 0.2 150 nF 220 nF 1.6± 0.2 1.6± 0.2 330 nF 470 nF 1.6± 0.2 680 nF 1 µF NOTE 1. Values in shaded cells indicate thickness class in mm 2. Capacitance value of non E-6 series is on request 3. For product with 5% tolerance, please contact local sales force before order

www.yageo.com Dec. 9, 2016 V.18 Surface-Mount Ceramic Multilayer Capacitors Product specification Table 13 THICKNESS CLASSES AND PACKING QUANTITY SIZE CODE THICKNESS CLASSIFICATION TAPE WIDTH QUANTITY PER REEL Ø 180 MM / 7 INCH Ø 330 MM / 13 INCH QUANTITY PER BULK CASE Paper Blister Paper Blister 0402 0.5 ± 0.05 mm 8 mm 10,000 --- 50,000 --- 50,000 0603 0.8 ± 0.1 mm 8 mm 4,000 --- 15,000 --- 15,000 0805 1206 1210 1,000 --- --- --- 500 --- --- --- 1808 1812

www.yageo.com Dec. 9, 2016 V.18 Surface-Mount Ceramic Multilayer Capacitors Product specification

ELECTRICAL CHARACTERISTICS

NNPP00//XX77RR DDIIEELLEECCTTRRIICC CCAAPPAACCIITTOORRSS;; NNIISSNN TTEERRMMIINNAATTIIOONNSS Unless otherwise specified, all test and measurements shall be made under standard atmospheric conditions for testing as given in 5.3 of IEC 60068 -1: - Temperature: 15 °C to 35 °C - Relative humidity: 25% to 75% - Air pressure: 86 kPa to 106 kPa Before the measurements are made, the capacitor shall be stored at the measuring temperature for a time sufficient to allow the entire capacitor to reach this temperature. The period as prescribed for recovery at the end of a test is normally sufficient for this purpose. Table 14 DESCRIPTION VALUE Capacitance range 0.47 pF to 2.2 µF Capacitance tolerance NP0 C < 10 pF ± 0.25 pF, ± 0.5 pF Dissipation factor (D.F.) NP0 C < 30 pF ≤ 1 / ( 400 + 20C ) C ≥ 30 pF ≤ 0.1 % X7R ≤ 2.5 % Exception X7R/0603/100V, 12nF ≤ C ≤ 100nF, X7R/1206/2.2uF/100V ≤ 5% X7R/1206/100V/1uF; X7R/1210/100V/1uF and 2.2uF; ≤ 3.5% Insulation resistance after 1 minute at Ur (DC) Rins ≥ 10 GΩ or Rins × C ≥ 500 seconds whichever is less Maximum capacitance change as a function of temperature (temperature characteristic/coefficient): NP0 ± 30 ppm/°C X7R ± 15% Operating temperature range: NP0/X7R –55 °C to +125 °C NOTE 1. Capacitance tolerance ±5% doesn't available for X7R full product range, please contact local sales force before order

www.yageo.com Dec. 9, 2016 V.18 Surface-Mount Ceramic Multilayer Capacitors Product specification SOLDERING RECOMMENDATION Table 15 SOLDERING METHOD SIZE 0201 0402 0603 0805 1206 ≥ 1210 Reflow Reflow only > 100 nF > 1.0 µF > 2.2 µF > 2.2 µF Reflow only Reflow/Wave ≤ 100 nF ≤ 1.0 µF ≤ 2.2 µF ≤ 2.2 µF --- TEST TEST METHOD PROCEDURE REQUIREMENTS Mounting IEC 60384-

4.3 The capacitors may be mounted on printed-circuit boards or

4.4 Any applicable method using × 10 magnification In accordance with specification

Capacitance 4.5.1 Class 1: f = 1 MHz for C ≤ 1 nF, measuring at voltage 1 Vrms at 20 °C f = 1 KHz for C > 1 nF, measuring at voltage 1 Vrms at 20 °C Class 2: f = 1 KHz for C ≤ 10 µF, measuring at voltage 1 Vrms at 20 °C Within specified tolerance Dissipation Factor (D.F.)

4.5.2 Class 1:

f = 1 MHz for C ≤ 1 nF , measuring at voltage 1 Vrms at 20 °C f = 1 KHz for C > 1 nF, measuring at voltage 1 Vrms at 20 °C Class 2: f = 1 KHz for C ≤ 10 µF, measuring at voltage 1 Vrms at 20 °C In accordance with specification Insulation Resistance

4.5.3 Ur ≤ 500 V: At Ur for 1 minute

Ur > 500 V: At 500 V for 1 minute In accordance with specification TESTS AND REQUIREMENTS Table 16 Test procedures and requirements

www.yageo.com Dec. 9, 2016 V.18 Surface-Mount Ceramic Multilayer Capacitors Product specification TEST TEST METHOD PROCEDURE REQUIREMENTS Temperature coefficient

4.6 Capacitance shall be measured by the steps shown

in the following table. The capacitance change should be measured after 5 min at each specified temperature stage. Step Temperature(℃) a 25± 2 b Lower temperature± 3℃ c 25± 2 d Upper Temperature± 2℃ e 25± 2 (1) Class I Temperature Coefficient shall be calculated from the formula as below Temp, Coefficient = 610T xC1 C1-C2 Δ [ppm/℃] C1: Capacitance at step c C2: Capacitance at 125℃ (2) Class II Capacitance Change shall be calculated from the formula as below ∆C = C1-C2 x 100% C1: Capacitance at step c C2: Capacitance at step b or d <General purpose series> Class1: ∆ C/C: ± 30ppm Class2: X7R: ∆ C/C: ±15% <High Capacitance series> Class2: X7R/X5R: ∆ C/C: ±15% Adhesion IEC 60384- 4.7 A force applied for 10 seconds to the line joining the terminations and in a plane parallel to the substrate Force size ≥ 0603: 5N Bending Strength 4.8 Mounting in accordance with IEC 60384-22 paragraph 4.3 No visible damage Conditions: bending 1 mm at a rate of 1 mm/s, radius jig 5 mm ∆C/C Class 1: NP0: within ± 1% or 0.5 pF, whichever is greater Class2: X7R: ± 10%

www.yageo.com Dec. 9, 2016 V.18 Surface-Mount Ceramic Multilayer Capacitors Product specification TEST TEST METHOD PROCEDURE REQUIREMENTS Resistance to Soldering Heat 4.9 Precondition: 150 +0/–10 °C for 1 hour, then keep for 24 ± 1 hours at room temperature Preheating: for size ≤ 1206: 120 °C to 150 °C for 1 minute Preheating: for size >1206: 100 °C to 120 °C for 1 minute and 170 °C to 200 °C for 1 minute Solder bath temperature: 260 ± 5 °C Dipping time: 10 ± 0.5 seconds Recovery time: 24 ±2 hours Dissolution of the end face plating shall not exceed 25% of the length of the edge concerned ∆C/C Class 1: NP0: within ±0.5% or 0.5 pF, whichever is greater Class2: X7R: ± 10% D.F. within initial specified value Rins within initial specified value Solderability 4.10 Preheated the temperature of 80 °C to 140 °C and maintained for 30 seconds to 60 seconds. Test conditions for lead containing solder alloy Temperature: 235 ± 5 °C Dipping time: 2 ± 0.2 seconds Depth of immersion: 10 mm Alloy Composition: 60/40 Sn/Pb Number of immersions: 1 Test conditions for leadfree containing solder alloy Temperature: 245 ± 5 °C Dipping time: 3 ± 0.3 seconds Depth of immersion: 10 mm Alloy Composition: SAC305 Number of immersions: 1 The solder should cover over 95% of the critical area of each termination Rapid Change of Temperature IEC 60384-

4.11 Preconditioning;

150 +0/–10 °C for 1 hour, then keep for 24 ± 1 hours at room temperature 5 cycles with following detail: 30 minutes at lower category temperature 30 minutes at upper category temperature Recovery time 24 ± 2 hours No visual damage ∆C/C Class 1: NP0: within ± 1% or 1 pF, whichever is greater Class2: X7R: ± 15% D.F. meet initial specified value Rins meet initial specified value

www.yageo.com Dec. 9, 2016 V.18 Surface-Mount Ceramic Multilayer Capacitors Product specification TEST TEST METHOD PROCEDURE REQUIREMENTS Damp Heat 4.13 1. Preconditioning, class 2 only: 150 +0/-10 °C /1 hour, then keep for 24 ± 1 hour at room temp 2. Initial measure: Spec: refer initial spec C, D, IR 3. Damp heat test: 500 ± 12 hours at 40 ±2 °C; 90 to 95% R.H. 4. Recovery: Class 1: 6 to 24 hours Class 2: 24 ± 2 hours 5. Final measure: C, D, IR P.S. If the capacitance value is less than the minimum value permitted, then after the other measurements have been made the capacitor shall be precondition according to “IEC 60384 4.1” and then the requirement shall be met. No visual damage after recovery ∆C/C Class 1: NP0: within ± 2% or 1 pF, whichever is greater Class2: X7R: ± 15% D.F. Class 1: NP0: ≤ 2 x specified value Class2: X7R: ≥ 25 V: ≤ 5% Rins Class 1: NP0: ≥ 2,500 MΩ or Rins x Cr ≥ 25s whichever is less Class2: X7R: ≥ 500 MΩ or Rins x Cr ≥ 25s whichever is less Endurance IEC 60384- 4.14 1. Preconditioning, class 2 only: 150 +0/-10 °C /1 hour, then keep for 24 ± 1 hour at room temp 2. Initial measure: Spec: refer initial spec C, D, IR 3. Endurance test: Temperature: NP0/X7R: 125 °C Specified stress voltage applied for 1,000 hours: 4. High voltage series follows with below stress condition: Applied 2.0 x Ur for 100 V series Applied 1.5 x Ur for 200/250 V series Applied 1.3 x Ur for 500 V, 630 V series Applied 1.2 x Ur for 1 KV, 2 KV, 3 KV series 5. Recovery time: 24 ± 2 hours 6. Final measure: C, D, IR P.S. If the capacitance value is less than the minimum value permitted, then after the other measurements have been made the capacitor shall be precondition according to “IEC 60384 4.1” and then the requirement shall be met. No visual damage ∆C/C Class1: NP0: within ± 2% or 1 pF, whichever is greater Class2: X7R: ± 15% D.F. Class1: NP0: ≤ 2 x specified value Class2: X7R: ≥ 25 V: ≤ 5% Rins Class1: NP0: ≥ 4,000 MΩ or Rins x Cr ≥ 40s whichever is less Class2: X7R: ≥ 1,000 MΩ or Rins x Cr ≥ 50s whichever is less Voltage Proof 4.6 Specified stress voltage applied for 1~5 seconds Ur ≤ 100 V: series applied 2.5 Ur

100 V < Ur ≤ 200 V series applied

(1.5 Ur + 100)

200 V < Ur ≤ 500 V series applied

(1.3 Ur + 100) Ur > 500 V: 1.3 Ur Ur ≧ 1000 V: 1.2 Ur Charge/Discharge current is less than 50 mA No breakdown or flashover

www.yageo.com Dec. 9, 2016 V.18 Surface-Mount Ceramic Multilayer Capacitors Product specification

REVISION HISTORY

REVISION DATE CHANGE NOTIFICATION DESCRIPTION Version 18 Dec 9, 2016 - - Soldering recommendation update Version 17 Aug 16, 2016 - - Capacitance range & thickness update Version 16 Apr. 16, 2015 - - Capacitance range & thickness Version 15 Apr. 16, 2015 - - Electrical characteristics update Version 14 Sep. 25, 2014 - - Electrical characteristics update Version 13 Apr. 21, 2014 - - Electrical characteristics update Version 12 Dec. 12, 2013 - - Electrical characteristics update Version 11 Jun. 17, 2013 - - Test method and procedure updated Version 10 Nov 22, 2012 - - Test method and procedure updated Version 9 Feb 02, 2012 - - Test method and procedure updated Version 8 Apr 22, 2011 - - NP0 0402 100V added Version 7 Mar 01, 2011 - - Dimension updated Version 6 Sep 30, 2010 - - Update the thickness of 0805 100V Version 5 Sep 28, 2010 - - Product range updated - Thickness classes and packing quantity table updated Version 4 Jun 17, 2010 - - Update the dimension of 0805, 1206 and 1812 Version 3 Mar 25, 2010 - - Product range update Version 2 Mar 15, 2010 - - Product range update Version 1 Oct 30, 2009 - - Change to dual brand datasheet that describe Mid-voltage NP0/X7R series with RoHS compliant - Replace the "100V to 630V" part of pdf files: UP-NP0X7R_MV_100-to- 500V_0, UY-NP0X7R_MV_100-to-500V_0, NP0_16V-to-100V_6, NP0_50-to-500V_10, X7R_16-to-500V_9 and X7R_16V-to-100V_9 - Define global part number - Description of "Halogen Free compliant" added - Test method and procedure updated Version 0 Sep 08, 2005 - - New