CBT3251D

CBT3251 PHILIPS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 10

Technical content

/C0080 /C0115 /C0111/C0110/C0111 /C0115 CBT3251 1-of-8 FET multiplexer/demultiplexer Preliminary data 2002 Sep 09 INTEGRATED CIRCUITS

Philips Semiconductors Preliminary data CBT32511-of-8 FET multiplexer/demultiplexer

22002 Sep 09

FEATURES

• 5 Ω switch connection between two ports
• TTL-compatible input levels
• Minimal propagation delay through the switch
• ESD protection exceeds 2000 V HBM per JESD22-A114,

200 V MM per JESD22-A115 and 1000 V CDM per JESD22-C101

• Latch-up testing is done to JESDEC Standard JESD78 which exceeds 100 mA

DESCRIPTION

The CBT3251 is a 1-of-8 high-speed TTL-compatible FET multiplexer/demultiplexer. The low on resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise. When output enable (OE) is low, the CBT3251 is enabled. S0, S1, and S2 select one of the B outputs for the A-input data. The CBT3251 is characterized for operation from –40 to +85°C. PIN CONFIGURATION 16B4 A NC OE GND VCC SA00570 PIN DESCRIPTION PIN NUMBER SYMBOL NAME AND FUNCTION 1, 2, 3, 4, 12, 13, 14, B1, B2, B3, B4, B5, B6, B7, B8B outputs

5 A A input

6 NC No internal connection

7 OE Output enable

8 GND Ground (0 V)

9, 10, 11 S0, S1, S2 Select-control input

16 VCC Positive supply voltage

ORDERING INFORMATION

PACKAGES TEMPERATURE RANGE ORDER CODE TOPSIDE MARK DWG NUMBER 16-pin plastic SOIC –40 to 85 °C CBT3251D CBT3251D SOT109-1 16-pin plastic SSOP –40 to 85 °C CBT3251DB CT3251 SOT338-1 16-pin plastic SSOP (QSOP) –40 to 85 °C CBT3251DS CBT3251 SOT519-1 16-pin plastic TSSOP –40 to 85 °C CBT3251PW CBT3251 SOT403-1 Standard packing quantities and other packaging data is available at www.philipslogic.com/packaging.

Philips Semiconductors Preliminary data CBT32511-of-8 FET multiplexer/demultiplexer

2002 Sep 09 3

LOGIC DIAGRAM (positive logic) OE SA00636 A B1 FUNCTION TABLE INPUTS FUNCTION OE S2 S1 S0 FUNCTION L L L L A port = B1 port L L L H A port = B2 port L L H L A port = B3 port L L H H A port = B4 port L H L L A port = B5 port L H L H A port = B6 port L H H L A port = B7 port L H H H A port = B8 port H X X X Disconnect

Philips Semiconductors Preliminary data CBT32511-of-8 FET multiplexer/demultiplexer

2002 Sep 09 4

ABSOLUTE MAXIMUM RATINGS 1 SYMBOL PARAMETER CONDITIONS RATING UNIT VCC DC supply voltage –0.5 to +7.0 V VI DC input voltage2 –0.5 to +7.0 V Continuous channel current 128 mA IK Input clamp current VI/O < 0 –50 mA Tstg Storage temperature range –65 to +150 °C NOTES: 1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 2. The input and output negative-voltage ratings may be exceeded if the input and output clamp-current ratings are observed. RECOMMENDED OPERATING CONDITIONS SYMBOL PARAMETER LIMITS UNITSYMBOL PARAMETER MIN MAX UNIT VCC DC supply voltage 4.5 5.5 V VIH High-level input voltage 2.0 — V VIL Low-level Input voltage — 0.8 V Tamb Operating free-air temperature range –40 +85 °C NOTE: 1. All unused control inputs of the device must be held at VCC or GND to ensure proper device operation. DC ELECTRICAL CHARACTERISTICS LIMITS SYMBOL PARAMETER TEST CONDITIONS Tamb = –40 to +85 °C UNIT MIN TYP 1 MAX VIK Input clamp voltage VCC = 4.5 V; II = –18 mA — — –1.2 V VP Pass voltage VI = VCC = 5.5 V; I/O = –100 mA 3.4 3.6 3.9 V II Input leakage current VCC = 5.5 V; VI = GND or 5.5 V — — ±1 µA ICC Quiescent supply current VCC = 5.5 V; IO = 0, VI = VCC or GND — — 3 µA ΔICC Control inputs2 VCC = 5.5 V, one input at 3.4 V, other inputs at VCC or GND — — 2.5 mA C I Control pins VI= 3 V or 0 — 3.5 — pF C O(O ) Power off leakage current A port VO = 3 V or 0; OE = VCC — 17.5 — pF C IO(OFF) Pow er-off leakage current B port VO = 3 V or 0; OE = VCC — 4.0 — pF VCC = 4 V; TYP @ VCC = 4 V; VI = 2.4 V; II = 15 mA — 14 20 Ω ron3 On-resistance VCC = 4.5 V; VI = 0 V; II = 64 mA — 5 7 Ωon VCC = 4.5 V; VI = 0 V; II = 30 mA — 5 7 Ω VCC = 4.5 V; VI = 2.4 V; II = 15 mA — 10 15 Ω NOTES: 1. All typical values are at VCC = 5 V, Tamb = 25 °C. 2. This is the increase in supply current for each input that is at the specified TTL voltage level rather than VCC or GND 3. Measured by the voltage drop between the A and the B terminals at the indicated current through the switch. On-state resistance is determined by the lowest voltage of the two (A or B) terminals.

Philips Semiconductors Preliminary data CBT32511-of-8 FET multiplexer/demultiplexer

2002 Sep 09 5

Tamb = –40 to +85 °C; CL = 50 pF TO LIMITS SYMBOL PARAMETER FROM (INPUT) TO (OUTPUT) VCC = +5.0 V ±0.5 V UNIT(OUTPUT) MIN MAX tpd Propagation delay1 A or B B or A — 0.25 ns tpd Propagation delay S A 2 5.5 ns t Output enable time S B 1.5 5.6 ns ten to High and Low level OE A or B 1.6 5.8 ns t Output disable time S B 1.9 6.4 ns tdis from High and Low level OE A or B 2.3 6.2 ns NOTE: 1. The propagation delay is the calculated RC time constant of the typical on-state resistance of the switch and the specified load capacitance, when driven by an ideal voltage source (zero output impedance). AC WAVEFORMS VM = 1.5V, VIN = GND to 3.0V INPUT 1.5 V OUTPUT tPLH tPHL SA00028 1.5 V 1.5 V 1.5 V 3 V 0 V VOH VOL Waveform 1. Input to Output Propagation Delays Output Control 1.5 V tPZH tPHZ VOH VOL tPZL tPLZ 3.5 V 0 V VOL + 0.3 V VOH – 0.3 V SA00571 1.5 V 1.5 V 1.5 V 0 V 3 V Output Waveform 1 S1 at 7 V (see Note) Note: Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control. Output Waveform 2 S1 at Open (see Note) Waveform 2. 3-State Output Enable and Disable Times NOTES: 1. tPLZ and tPHZ are the same as tdis. 2. tPZL and tPZH are the same as ten. 3. tPLH and tPHL are the same as tpd. TEST CIRCUIT AND WAVEFORMS C L = 50 pF 500 Ω Load Circuit DEFINITIONS C L = Load capacitance includes jig and probe capacitance; see AC CHARACTERISTICS for value. TEST S1 tpd open tPLZ /tPZL 7 V tPHZ /tPZH open SA00012 500 ΩFrom Output Under Test 7 V Open GND NOTES: 1. All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω , tr ≤ 2.5 ns, tf ≤ 2.5 ns. 2. The outputs are measured one at a time with one transition per measurement.

Philips Semiconductors Preliminary data CBT32511-of-8 FET multiplexer/demultiplexer

2002 Sep 09 6

SO16: plastic small outline package; 16 leads; body width 3.9 mm SOT109-1

Philips Semiconductors Preliminary data CBT32511-of-8 FET multiplexer/demultiplexer

2002 Sep 09 7

SSOP16: plastic shrink small outline package; 16 leads; body width 5.3 mm SOT338-1

Philips Semiconductors Preliminary data CBT32511-of-8 FET multiplexer/demultiplexer

2002 Sep 09 8

SSOP16: plastic shrink small outline package; 16 leads; body width 3.9 mm; lead pitch 0.635 mm SOT519-1

Philips Semiconductors Preliminary data CBT32511-of-8 FET multiplexer/demultiplexer

2002 Sep 09 9

TSSOP16: plastic thin shrink small outline package; 16 leads; body width 4.4 mm SOT403-1

Philips Semiconductors Preliminary data CBT32511-of-8 FET multiplexer/demultiplexer

2002 Sep 09 10

Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Disclaimers Life support — These products are not designed for use in life support appliances, devices or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes — Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Contact information For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825 For sales offices addresses send e-mail to:  Koninklijke Philips Electronics N.V. 2002 All rights reserved. Printed in U.S.A. Date of release: 08-02 Document order number: /C0080 /C0115 /C0111/C0110/C0111 /C0115 Data sheet status[1] Objective data Preliminary data Product data Product status[2] Development Qualification Production Definitions This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Changes will be communicated according to the Customer Product/Process Change Notification (CPCN) procedure SNW-SQ-650A. Data sheet status [1] Please consult the most recently issued data sheet before initiating or completing a design. [2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com.