CBP6-507BG MINI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits The Big Deal

  • Low insertion loss with excellent power handling
  • Passbands up to 6 GHz
  • Fractional bandwidth from <1 to 25%
  • Low profile designs with min. height of 0.120”
  • Excellent temperature stability
  • Rugged construction to handle demanding environmental conditions Product Overview Mini-Circuits’ Coaxial-Ceramic Resonator filters offer low insertion loss in very small form factors, using ceramic material with high dielectric constant and superior Q factor. Bandpass and bandstop filters,diplexer and multiplexer designs can be constructed using this technology. Low insertion loss combined with excellent power handling makes these filters well suited for transmitter and receiver signal chains. Advanced filter design and construction can achieve stopband width greater than 3x the center frequency as high as 20 GHz. All our coaxial-ceramic resonator filters are built with rugged construction, qualified to withstand multiple demanding reflow cycles. Excellent repeatability across units is achieved through precise tuning and process control. Key Features 50Ω DC to 6 GHz Coaxial-Ceramic Resonator Filters and Multiplexers Surface Mount Page 1 of 3 Feature Advantages Low insertion loss Low signal loss results in better SNR in signal chain Fast roll-off Higher selectivity results in better adjacent channel rejection and dynamic range Wide stop band Wide spur-free stopband results in better receiver sensitivity Excellent power handling Well suited for transmitter applications Rugged Construction These filter assemblies have been qualified over a wide range of thermal, mechanical and environ- mental conditions including withstanding the stress of extensive solder reflow cycles Small Size Very well suited for high performance applications where size is a constraint. Temperature stability Very minimal change in electrical performance across temperature makes these filters suitable for a wide range of operating conditions.

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits Surface Mount CBP6-507BG+ Electrical Specifications at 25°C CASE STYLE: KV1710-3 Parameter F# Frequency (MHz) Min. Typ. Max. Unit Pass Band Center Frequency - - - 507 - MHz Insertion Loss F1-F2 504 - 509 - 3.8 4.8 dB VSWR F1-F2 504- 509 - 1.43 1.92 :1 Stop Band, Lower Insertion Loss DC-F3 DC - 430 70 85 - dB F3-F4 430 - 486 40 52 - dB Stop Band, Upper Insertion Loss F5-F6 528 - 600 40 52 - dB F6-F7 600 - 1300 60 70 - dB F7-F8 1300 - 1900 - 40 - dB Maximum Ratings Operating Temperature -40°C to 85°C Storage Temperature -55°C to 100°C RF Power Input* 6W Max. @ 25°C Permanent damage may occur if any of these limits are exceeded. REV.OR ECO-005270 CBP6-507BG+ EDU3708 URJ 201208 Page 2 of 3 Typical Frequency Response Functional Schematic F1 F2 FREQUENCY (MHz) INSERTION LOSS (dB) F4F3 F7DC F5 F6 F8 RF IN RF OUT +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications 50Ω 504 to 509 MHz Bandpass Filter

Applications

  • Industrial / Business Radio pool
  • Private and public land mobile
  • Test and measurement

Features

  • High rejection, 70 dB typ.
  • High selectivity <2% Bandwidth
  • Miniature shielded package Typical Performance Data at 25°C Frequency (MHz) Insertion Loss (dB) VSWR (:1) Frequency (MHz) Group Delay (ns) 1 108.12 353.45 504.0 88.81 10 97.61 418.70 505.0 84.47 100 96.14 863.84 505.6 83.31 430 87.65 421.65 505.8 83.11 486 51.65 91.40 506.0 82.95 495 30.00 28.81 506.2 82.89 498 18.61 12.21 506.4 82.90 504 3.36 1.24 506.6 82.98 505 3.20 1.09 506.8 83.18 506 3.15 1.11 507.0 83.45 507 3.16 1.18 507.2 83.81 509 3.46 1.14 507.4 84.29 516 24.52 23.90 507.6 84.88 519 33.86 46.90 507.8 85.57 528 52.52 135.45 508.0 86.43 600 87.24 419.00 508.2 87.44 1000 78.78 211.67 508.4 88.56 1300 90.06 130.36 508.6 89.88 1500 54.08 10.71 508.8 91.61 1900 59.29 111.79 509.0 93.23 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 497 502 507 512 517 VSWR (:1) FREQUENCY (MHz) CBP6-507BG+ VSWR 497 502 507 512 517 INSERTION LOSS (dB) FREQUENCY (MHz) CBP6-507BG+ INSERTION LOSS (Zoomed) 100 105 502 504 506 508 510 GROUP DELAY (ns) FREQUENCY (MHz) CBP6-507BG+ GROUP DELAY 100 0 500 1000 1500 2000 INSERTION LOSS (dB) FREQUENCY (MHz) CBP6-507BG+ INSERTION LOSS Generic photo used for illustration purposes only Measured on Mini-Circuits Characterization Test Board TB-1123+

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits CBP6-507BG+ Outline Drawing INPUT 1 OUTPUT 12 GROUND 2-11, 13-17 Pad Connections Demo Board MCL P/N: TB-1123+ Suggested PCB Layout (PL-654) inch mmOutline Dimensions ( ) A 1.050 26.67 B .875 22.23 C .330 8.38 D 1.000 25.40 E .160 4.06 F .585 14.86 G .278 7.05 H .205 5.21 J .760 19.30 K .070 1.78 L .150 3.81 M .090 2.29 N .130 3.30 P 1.090 27.69 Q .870 22.10 R .915 23.24 S .625 15.88 T .710 18.03 U .695 17.65 V .870 22.10 W .390 9.91 X .125 3.18 Y .070 1.78 Z .458 11.62 Wt. grams Page 3 of 3 Note: Please refer to case style drawing for details