CBP4-1875Q+ MINI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

Coaxial-Ceramic Resonator Filters and Multiplexers SURFACE MOUNT PAGE 1 OF 4 50Ω DC to 6 GHz THE BIG DEAL y Low insertion loss with excellent power handling y Passbands up to 6 GHz y Fractional bandwidth from <1 to 25% y Low profile designs with min. height of 0.120” y Excellent temperature stability y Rugged construction to handle demanding environmental conditions KEY FEATURES Feature Advantages Low insertion loss Low signal loss results in better SNR in signal chain Fast roll-off Higher selectivity results in better adjacent channel rejection and dynamic range Wide stop band Wide spur-free stopband results in better receiver sensitivity Excellent power handling Well suited for transmitter applications Rugged Construction These filter assemblies have been qualified over a wide range of thermal, mechanical and environmental conditions including withstanding the stress of extensive solder reflow cycles Small Size Very well suited for high performance applications where size is a constraint. Temperature stability Very minimal change in electrical performance across temperature makes these filters suitable for a wide range of operating conditions. PRODUCT OVERVIEW Mini-Circuits’ Coaxial-Ceramic Resonator filters offer low insertion loss in very small form factors, using ceramic material with high dielectric constant and superior Q factor. Bandpass and bandstop filters,diplexer and multiplexer designs can be constructed using this technology. Low insertion loss combined with excellent power handling makes these filters well suited for transmitter and receiver signal chains. Advanced filter design and construction can achieve stopband width greater than 3x the center frequency as high as 20 GHz. All our coaxial-ceramic resonator filters are built with rugged construction, qualified to withstand multiple demanding reflow cycles. Excellent repeatability across units is achieved through precise tuning and process control. REV. OR ECO-015196 CBP4-1875Q+ EDU4470 URJ 221003

SURFACE MOUNT CERAMIC RESONATOR CBP4-1875Q+ PAGE 2 OF 4 50Ω 1825 to 1925 MHz Permanent damage may occur if any of these limits are exceeded. *Passband rating 1. Measured on Mini-Circuits T est Board TB-CBP4-1875Q+ ELECTRICAL SPECIFICATIONS AT 25°C Parameter F# Frequency (MHz) Min. Typ. Max. Units Passband Center Frequency — — — 1875 — MHz Insertion Loss F1-F2 1825 - 1925 — 2.5 3.2 dB Return Loss F1-F2 1825 - 1925 10 15 — dB Stop Band, Lower Rejection DC-F3 DC - 1680 60 70 — dB F3-F4 1680 - 1775 20 30 — Stop Band, Upper Rejection F5-F6 1971 - 2100 20 29 — dB F6-F7 2100 - 3000 48 60 — Parameter Ratings Operating temperature -40°C to +85°C Storage temperature -55°C to +100°C RF Power Input * 7W at 25°C MAXIMUM RATINGS TYPICAL FREQUENCY RESPONSE F1 F2 FREQUENCY (MHz) INSERTION LOSS (dB) F5F4 F6DC F3 F7 FUNCTIONAL SCHEMATIC

FEATURES

y High rejection, 60dB typ. y Narrow band and fast roll-off y Good insertion loss, 2.5dB typ.

APPLICATIONS

y International Mobile T elecommunication CASE STYLE: HQ2299 +RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications Generic photo used for illustration purposes only Coaxial-Ceramic Resonator Filters and Multiplexers

SURFACE MOUNT CERAMIC RESONATOR CBP4-1875Q+ PAGE 3 OF 4 RF IN 1 RF OUT 8 GROUND 2-7,9-14 PAD CONNECTIONS OUTLINE DRAWING DEMO BOARD MCL P/N: TB-CBP4-1875Q+ SUGGESTED PCB LAYOUT (PL-543) OUTLINE DIMENSIONS (Inches)mm A .365 9.27 B 1.360 34.54 C Min Max .240 .270 6.10 6.86 D .483 12.27 E 1.200 30.48 F .305 7.75 G .150 3.81 H .118 3.00 J .100 2.54 K .140 3.56 L .180 4.57 M 1.400 35.56 N .405 10.29 P .153 3.87 Q .285 7.24 R .263 6.67 S .120 3.05 T .155 3.94 U .275 6.99 Wt. grams 5.0 Note: Please refer to case style drawing for details

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard T erms”); Purchasers of this part are entitled to the rights Bandpass Filter CBP4-1875Q+ SURFACE MOUNT CERAMIC RESONATOR Frequency (MHz) Insertion Loss (dB) Return Loss (dB) Frequency (MHz) Group Delay (ns) 5 103.11 0.05 1825 15.25 100 84.44 0.06 1833 13.45 1680 72.29 0.22 1839 12.65 1775 30.79 0.53 1845 12.06 1789 20.55 0.97 1851 11.66 1813 3.22 17.22 1857 11.41 1825 2.23 18.84 1863 11.28 1875 1.63 29.87 1869 11.21 1905 1.81 29.56 1875 11.22 1925 2.44 18.92 1883 11.35 1931 3.12 15.89 1891 11.61 1955 20.45 1.04 1899 12.08 1971 31.90 0.64 1905 12.61 2100 66.75 0.31 1915 13.95 3000 65.05 0.09 1925 16.98 TYPICAL PERFORMANCE DATA AT 25°C 1750 1800 1850 1900 1950 2000 RETURN LOSS (dB) FREQUENCY (MHz) CBP4-1875Q+ RETURN LOSS 1800 1830 1860 1890 1920 1950 GROUP DELAY (ns) FREQUENCY (MHz) CBP4-1875Q+ GROUP DELAY 100 0 500 1000 1500 2000 2500 3000 INSERTION LOSS (dB) FREQUENCY (MHz) CBP4-1875Q+ INSERTION LOSS 1750 1800 1850 1900 1950 2000 INSERTION LOSS (dB) FREQUENCY (MHz) CBP4-1875Q+ INSERTION LOSS (Zoomed)